From: <pbhagavatula@marvell.com>
To: <jerinj@marvell.com>, <konstantin.ananyev@intel.com>,
Marko Kovacevic <marko.kovacevic@intel.com>,
Ori Kam <orika@mellanox.com>,
Bruce Richardson <bruce.richardson@intel.com>,
Radu Nicolau <radu.nicolau@intel.com>,
"Akhil Goyal" <akhil.goyal@nxp.com>,
Tomasz Kantecki <tomasz.kantecki@intel.com>,
Sunil Kumar Kori <skori@marvell.com>,
Pavan Nikhilesh <pbhagavatula@marvell.com>
Cc: <dev@dpdk.org>
Subject: [dpdk-dev] [PATCH v3 08/11] examples/l3fwd: add event lpm main loop
Date: Sat, 11 Jan 2020 19:17:27 +0530 [thread overview]
Message-ID: <20200111134730.5329-9-pbhagavatula@marvell.com> (raw)
In-Reply-To: <20200111134730.5329-1-pbhagavatula@marvell.com>
From: Pavan Nikhilesh <pbhagavatula@marvell.com>
Add lpm main loop for handling events based on capabilities of the
event device.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
---
examples/l3fwd/l3fwd.h | 9 ++
examples/l3fwd/l3fwd_event.c | 9 ++
examples/l3fwd/l3fwd_event.h | 5 +
examples/l3fwd/l3fwd_lpm.c | 203 +++++++++++++++++++++++++++++++++++
examples/l3fwd/main.c | 1 +
5 files changed, 227 insertions(+)
diff --git a/examples/l3fwd/l3fwd.h b/examples/l3fwd/l3fwd.h
index ed5ba5f3b..b3cdcd496 100644
--- a/examples/l3fwd/l3fwd.h
+++ b/examples/l3fwd/l3fwd.h
@@ -207,6 +207,15 @@ em_main_loop(__attribute__((unused)) void *dummy);
int
lpm_main_loop(__attribute__((unused)) void *dummy);
+int
+lpm_event_main_loop_tx_d(__attribute__((unused)) void *dummy);
+int
+lpm_event_main_loop_tx_d_burst(__attribute__((unused)) void *dummy);
+int
+lpm_event_main_loop_tx_q(__attribute__((unused)) void *dummy);
+int
+lpm_event_main_loop_tx_q_burst(__attribute__((unused)) void *dummy);
+
/* Return ipv4/ipv6 fwd lookup struct for LPM or EM. */
void *
em_get_ipv4_l3fwd_lookup_struct(const int socketid);
diff --git a/examples/l3fwd/l3fwd_event.c b/examples/l3fwd/l3fwd_event.c
index 1ed42c3ab..ebddd8f97 100644
--- a/examples/l3fwd/l3fwd_event.c
+++ b/examples/l3fwd/l3fwd_event.c
@@ -211,6 +211,12 @@ void
l3fwd_event_resource_setup(struct rte_eth_conf *port_conf)
{
struct l3fwd_event_resources *evt_rsrc = l3fwd_get_eventdev_rsrc();
+ const event_loop_cb lpm_event_loop[2][2] = {
+ [0][0] = lpm_event_main_loop_tx_d,
+ [0][1] = lpm_event_main_loop_tx_d_burst,
+ [1][0] = lpm_event_main_loop_tx_q,
+ [1][1] = lpm_event_main_loop_tx_q_burst,
+ };
uint32_t event_queue_cfg;
int ret;
@@ -242,4 +248,7 @@ l3fwd_event_resource_setup(struct rte_eth_conf *port_conf)
ret = rte_event_dev_start(evt_rsrc->event_d_id);
if (ret < 0)
rte_exit(EXIT_FAILURE, "Error in starting eventdev");
+
+ evt_rsrc->ops.lpm_event_loop = lpm_event_loop[evt_rsrc->tx_mode_q]
+ [evt_rsrc->has_burst];
}
diff --git a/examples/l3fwd/l3fwd_event.h b/examples/l3fwd/l3fwd_event.h
index b1ae970d4..0e4616417 100644
--- a/examples/l3fwd/l3fwd_event.h
+++ b/examples/l3fwd/l3fwd_event.h
@@ -14,6 +14,11 @@
#include "l3fwd.h"
+#define L3FWD_EVENT_SINGLE 0x1
+#define L3FWD_EVENT_BURST 0x2
+#define L3FWD_EVENT_TX_DIRECT 0x4
+#define L3FWD_EVENT_TX_ENQ 0x8
+
typedef uint32_t (*event_device_setup_cb)(void);
typedef void (*event_queue_setup_cb)(uint32_t event_queue_cfg);
typedef void (*event_port_setup_cb)(void);
diff --git a/examples/l3fwd/l3fwd_lpm.c b/examples/l3fwd/l3fwd_lpm.c
index 349de2703..058a60b1d 100644
--- a/examples/l3fwd/l3fwd_lpm.c
+++ b/examples/l3fwd/l3fwd_lpm.c
@@ -28,6 +28,7 @@
#include <rte_lpm6.h>
#include "l3fwd.h"
+#include "l3fwd_event.h"
struct ipv4_l3fwd_lpm_route {
uint32_t ip;
@@ -254,6 +255,208 @@ lpm_main_loop(__attribute__((unused)) void *dummy)
return 0;
}
+static __rte_always_inline uint16_t
+lpm_process_event_pkt(const struct lcore_conf *lconf, struct rte_mbuf *mbuf)
+{
+ mbuf->port = lpm_get_dst_port(lconf, mbuf, mbuf->port);
+
+#if defined RTE_ARCH_X86 || defined RTE_MACHINE_CPUFLAG_NEON \
+ || defined RTE_ARCH_PPC_64
+ process_packet(mbuf, &mbuf->port);
+#else
+
+ struct rte_ether_hdr *eth_hdr = rte_pktmbuf_mtod(mbuf,
+ struct rte_ether_hdr *);
+#ifdef DO_RFC_1812_CHECKS
+ struct rte_ipv4_hdr *ipv4_hdr;
+ if (RTE_ETH_IS_IPV4_HDR(mbuf->packet_type)) {
+ /* Handle IPv4 headers.*/
+ ipv4_hdr = rte_pktmbuf_mtod_offset(mbuf,
+ struct rte_ipv4_hdr *,
+ sizeof(struct rte_ether_hdr));
+
+ if (is_valid_ipv4_pkt(ipv4_hdr, mbuf->pkt_len)
+ < 0) {
+ mbuf->port = BAD_PORT;
+ continue;
+ }
+ /* Update time to live and header checksum */
+ --(ipv4_hdr->time_to_live);
+ ++(ipv4_hdr->hdr_checksum);
+ }
+#endif
+ /* dst addr */
+ *(uint64_t *)ð_hdr->d_addr = dest_eth_addr[mbuf->port];
+
+ /* src addr */
+ rte_ether_addr_copy(&ports_eth_addr[mbuf->port],
+ ð_hdr->s_addr);
+#endif
+ return mbuf->port;
+}
+
+static __rte_always_inline void
+lpm_event_loop_single(struct l3fwd_event_resources *evt_rsrc,
+ const uint8_t flags)
+{
+ const int event_p_id = l3fwd_get_free_event_port(evt_rsrc);
+ const uint8_t tx_q_id = evt_rsrc->evq.event_q_id[
+ evt_rsrc->evq.nb_queues - 1];
+ const uint8_t event_d_id = evt_rsrc->event_d_id;
+ struct lcore_conf *lconf;
+ unsigned int lcore_id;
+ struct rte_event ev;
+
+ if (event_p_id < 0)
+ return;
+
+ lcore_id = rte_lcore_id();
+ lconf = &lcore_conf[lcore_id];
+
+ RTE_LOG(INFO, L3FWD, "entering %s on lcore %u\n", __func__, lcore_id);
+ while (!force_quit) {
+ if (!rte_event_dequeue_burst(event_d_id, event_p_id, &ev, 1, 0))
+ continue;
+
+ if (lpm_process_event_pkt(lconf, ev.mbuf) == BAD_PORT) {
+ rte_pktmbuf_free(ev.mbuf);
+ continue;
+ }
+
+ if (flags & L3FWD_EVENT_TX_ENQ) {
+ ev.queue_id = tx_q_id;
+ ev.op = RTE_EVENT_OP_FORWARD;
+ while (rte_event_enqueue_burst(event_d_id, event_p_id,
+ &ev, 1) && !force_quit)
+ ;
+ }
+
+ if (flags & L3FWD_EVENT_TX_DIRECT) {
+ rte_event_eth_tx_adapter_txq_set(ev.mbuf, 0);
+ while (!rte_event_eth_tx_adapter_enqueue(event_d_id,
+ event_p_id, &ev, 1, 0) &&
+ !force_quit)
+ ;
+ }
+ }
+}
+
+static __rte_always_inline void
+lpm_event_loop_burst(struct l3fwd_event_resources *evt_rsrc,
+ const uint8_t flags)
+{
+ const int event_p_id = l3fwd_get_free_event_port(evt_rsrc);
+ const uint8_t tx_q_id = evt_rsrc->evq.event_q_id[
+ evt_rsrc->evq.nb_queues - 1];
+ const uint8_t event_d_id = evt_rsrc->event_d_id;
+ const uint16_t deq_len = evt_rsrc->deq_depth;
+ struct rte_event events[MAX_PKT_BURST];
+ struct lcore_conf *lconf;
+ unsigned int lcore_id;
+ int i, nb_enq, nb_deq;
+
+ if (event_p_id < 0)
+ return;
+
+ lcore_id = rte_lcore_id();
+
+ lconf = &lcore_conf[lcore_id];
+
+ RTE_LOG(INFO, L3FWD, "entering %s on lcore %u\n", __func__, lcore_id);
+
+ while (!force_quit) {
+ /* Read events from RX queues */
+ nb_deq = rte_event_dequeue_burst(event_d_id, event_p_id,
+ events, deq_len, 0);
+ if (nb_deq == 0) {
+ rte_pause();
+ continue;
+ }
+
+ for (i = 0; i < nb_deq; i++) {
+ if (flags & L3FWD_EVENT_TX_ENQ) {
+ events[i].queue_id = tx_q_id;
+ events[i].op = RTE_EVENT_OP_FORWARD;
+ }
+
+ if (flags & L3FWD_EVENT_TX_DIRECT)
+ rte_event_eth_tx_adapter_txq_set(events[i].mbuf,
+ 0);
+
+ lpm_process_event_pkt(lconf, events[i].mbuf);
+ }
+
+ if (flags & L3FWD_EVENT_TX_ENQ) {
+ nb_enq = rte_event_enqueue_burst(event_d_id, event_p_id,
+ events, nb_deq);
+ while (nb_enq < nb_deq && !force_quit)
+ nb_enq += rte_event_enqueue_burst(event_d_id,
+ event_p_id, events + nb_enq,
+ nb_deq - nb_enq);
+ }
+
+ if (flags & L3FWD_EVENT_TX_DIRECT) {
+ nb_enq = rte_event_eth_tx_adapter_enqueue(event_d_id,
+ event_p_id, events, nb_deq, 0);
+ while (nb_enq < nb_deq && !force_quit)
+ nb_enq += rte_event_eth_tx_adapter_enqueue(
+ event_d_id, event_p_id,
+ events + nb_enq,
+ nb_deq - nb_enq, 0);
+ }
+ }
+}
+
+static __rte_always_inline void
+lpm_event_loop(struct l3fwd_event_resources *evt_rsrc,
+ const uint8_t flags)
+{
+ if (flags & L3FWD_EVENT_SINGLE)
+ lpm_event_loop_single(evt_rsrc, flags);
+ if (flags & L3FWD_EVENT_BURST)
+ lpm_event_loop_burst(evt_rsrc, flags);
+}
+
+int __rte_noinline
+lpm_event_main_loop_tx_d(__attribute__((unused)) void *dummy)
+{
+ struct l3fwd_event_resources *evt_rsrc =
+ l3fwd_get_eventdev_rsrc();
+
+ lpm_event_loop(evt_rsrc, L3FWD_EVENT_TX_DIRECT | L3FWD_EVENT_SINGLE);
+ return 0;
+}
+
+int __rte_noinline
+lpm_event_main_loop_tx_d_burst(__attribute__((unused)) void *dummy)
+{
+ struct l3fwd_event_resources *evt_rsrc =
+ l3fwd_get_eventdev_rsrc();
+
+ lpm_event_loop(evt_rsrc, L3FWD_EVENT_TX_DIRECT | L3FWD_EVENT_BURST);
+ return 0;
+}
+
+int __rte_noinline
+lpm_event_main_loop_tx_q(__attribute__((unused)) void *dummy)
+{
+ struct l3fwd_event_resources *evt_rsrc =
+ l3fwd_get_eventdev_rsrc();
+
+ lpm_event_loop(evt_rsrc, L3FWD_EVENT_TX_ENQ | L3FWD_EVENT_SINGLE);
+ return 0;
+}
+
+int __rte_noinline
+lpm_event_main_loop_tx_q_burst(__attribute__((unused)) void *dummy)
+{
+ struct l3fwd_event_resources *evt_rsrc =
+ l3fwd_get_eventdev_rsrc();
+
+ lpm_event_loop(evt_rsrc, L3FWD_EVENT_TX_ENQ | L3FWD_EVENT_BURST);
+ return 0;
+}
+
void
setup_lpm(const int socketid)
{
diff --git a/examples/l3fwd/main.c b/examples/l3fwd/main.c
index b39dc6ff6..5ef6576bc 100644
--- a/examples/l3fwd/main.c
+++ b/examples/l3fwd/main.c
@@ -1204,6 +1204,7 @@ main(int argc, char **argv)
/* Configure eventdev parameters if user has requested */
if (evt_rsrc->enabled) {
l3fwd_event_resource_setup(&port_conf);
+ l3fwd_lkp.main_loop = evt_rsrc->ops.lpm_event_loop;
l3fwd_event_service_setup();
} else
l3fwd_poll_resource_setup();
--
2.17.1
next prev parent reply other threads:[~2020-01-11 13:48 UTC|newest]
Thread overview: 78+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-04 14:43 [dpdk-dev] [PATCH v2 00/11] example/l3fwd: introduce event device support pbhagavatula
2019-12-04 14:43 ` [dpdk-dev] [PATCH v2 01/11] examples/l3fwd: add framework for event device pbhagavatula
2020-01-03 12:49 ` Ananyev, Konstantin
2020-01-06 4:27 ` Pavan Nikhilesh Bhagavatula
2020-01-06 12:32 ` Ananyev, Konstantin
2020-01-07 16:34 ` Pavan Nikhilesh Bhagavatula
2019-12-04 14:43 ` [dpdk-dev] [PATCH v2 02/11] examples/l3fwd: split pipelines based on capability pbhagavatula
2019-12-04 14:43 ` [dpdk-dev] [PATCH v2 03/11] examples/l3fwd: add event device configuration pbhagavatula
2019-12-04 14:43 ` [dpdk-dev] [PATCH v2 04/11] examples/l3fwd: add ethdev setup based on eventdev pbhagavatula
2019-12-27 13:33 ` Nipun Gupta
2019-12-29 15:42 ` Pavan Nikhilesh Bhagavatula
2019-12-30 7:40 ` Nipun Gupta
2020-01-02 6:21 ` Pavan Nikhilesh Bhagavatula
2020-01-02 8:49 ` Nipun Gupta
2020-01-02 9:33 ` Jerin Jacob
2020-01-03 9:06 ` Nipun Gupta
2020-01-03 9:09 ` Jerin Jacob
2019-12-04 14:43 ` [dpdk-dev] [PATCH v2 05/11] examples/l3fwd: add event port and queue setup pbhagavatula
2019-12-04 14:43 ` [dpdk-dev] [PATCH v2 06/11] examples/l3fwd: add event eth Rx/Tx adapter setup pbhagavatula
2019-12-04 14:43 ` [dpdk-dev] [PATCH v2 07/11] examples/l3fwd: add service core setup based on caps pbhagavatula
2020-01-03 13:07 ` Ananyev, Konstantin
2020-01-06 4:29 ` Pavan Nikhilesh Bhagavatula
2019-12-04 14:43 ` [dpdk-dev] [PATCH v2 08/11] examples/l3fwd: add event lpm main loop pbhagavatula
2020-01-03 13:16 ` Ananyev, Konstantin
2020-01-06 4:43 ` Pavan Nikhilesh Bhagavatula
2019-12-04 14:43 ` [dpdk-dev] [PATCH v2 09/11] examples/l3fwd: add event em " pbhagavatula
2020-01-03 13:45 ` Ananyev, Konstantin
2020-01-06 4:44 ` Pavan Nikhilesh Bhagavatula
2020-01-06 12:27 ` Ananyev, Konstantin
2019-12-04 14:43 ` [dpdk-dev] [PATCH v2 10/11] examples/l3fwd: add graceful teardown for eventdevice pbhagavatula
2020-01-03 13:52 ` Ananyev, Konstantin
2020-01-06 4:50 ` Pavan Nikhilesh Bhagavatula
2020-01-06 12:12 ` Ananyev, Konstantin
2020-01-07 16:28 ` Pavan Nikhilesh Bhagavatula
2019-12-04 14:43 ` [dpdk-dev] [PATCH v2 11/11] doc: update l3fwd user guide to support eventdev pbhagavatula
2019-12-04 15:16 ` [dpdk-dev] [PATCH v2 00/11] example/l3fwd: introduce event device support Jerin Jacob
2020-01-11 13:47 ` [dpdk-dev] [PATCH v3 " pbhagavatula
2020-01-11 13:47 ` [dpdk-dev] [PATCH v3 01/11] examples/l3fwd: add framework for event device pbhagavatula
2020-01-21 8:44 ` Jerin Jacob
2020-01-11 13:47 ` [dpdk-dev] [PATCH v3 02/11] examples/l3fwd: split pipelines based on capability pbhagavatula
2020-01-21 8:46 ` Jerin Jacob
2020-01-11 13:47 ` [dpdk-dev] [PATCH v3 03/11] examples/l3fwd: add event device configuration pbhagavatula
2020-01-21 8:51 ` Jerin Jacob
2020-01-11 13:47 ` [dpdk-dev] [PATCH v3 04/11] examples/l3fwd: add ethdev setup based on eventdev pbhagavatula
2020-01-11 13:47 ` [dpdk-dev] [PATCH v3 05/11] examples/l3fwd: add event port and queue setup pbhagavatula
2020-01-11 13:47 ` [dpdk-dev] [PATCH v3 06/11] examples/l3fwd: add event eth Rx/Tx adapter setup pbhagavatula
2020-01-11 13:47 ` [dpdk-dev] [PATCH v3 07/11] examples/l3fwd: add service core setup based on caps pbhagavatula
2020-01-11 13:47 ` pbhagavatula [this message]
2020-01-11 13:47 ` [dpdk-dev] [PATCH v3 09/11] examples/l3fwd: add event em main loop pbhagavatula
2020-01-11 13:47 ` [dpdk-dev] [PATCH v3 10/11] examples/l3fwd: add graceful teardown for eventdevice pbhagavatula
2020-01-11 13:47 ` [dpdk-dev] [PATCH v3 11/11] doc: update l3fwd user guide to support eventdev pbhagavatula
2020-01-13 12:02 ` [dpdk-dev] [PATCH v3 00/11] example/l3fwd: introduce event device support Nipun Gupta
2020-01-22 18:28 ` [dpdk-dev] [PATCH v4 " pbhagavatula
2020-01-22 18:28 ` [dpdk-dev] [PATCH v4 01/11] examples/l3fwd: add framework for event device pbhagavatula
2020-01-22 18:28 ` [dpdk-dev] [PATCH v4 02/11] examples/l3fwd: split pipelines based on capability pbhagavatula
2020-01-22 18:28 ` [dpdk-dev] [PATCH v4 03/11] examples/l3fwd: add event device configuration pbhagavatula
2020-01-22 18:28 ` [dpdk-dev] [PATCH v4 04/11] examples/l3fwd: add ethdev setup based on eventdev pbhagavatula
2020-01-22 18:28 ` [dpdk-dev] [PATCH v4 05/11] examples/l3fwd: add event port and queue setup pbhagavatula
2020-01-22 18:28 ` [dpdk-dev] [PATCH v4 06/11] examples/l3fwd: add event eth Rx/Tx adapter setup pbhagavatula
2020-01-22 18:28 ` [dpdk-dev] [PATCH v4 07/11] examples/l3fwd: add service core setup based on caps pbhagavatula
2020-01-22 18:28 ` [dpdk-dev] [PATCH v4 08/11] examples/l3fwd: add event lpm main loop pbhagavatula
2020-01-22 18:28 ` [dpdk-dev] [PATCH v4 09/11] examples/l3fwd: add event em " pbhagavatula
2020-01-22 18:28 ` [dpdk-dev] [PATCH v4 10/11] examples/l3fwd: add graceful teardown for eventdevice pbhagavatula
2020-01-22 18:28 ` [dpdk-dev] [PATCH v4 11/11] doc: update l3fwd user guide to support eventdev pbhagavatula
2020-01-23 5:25 ` Jerin Jacob
2020-01-24 4:05 ` [dpdk-dev] [PATCH v5 00/11] example/l3fwd: introduce event device support pbhagavatula
2020-01-24 4:05 ` [dpdk-dev] [PATCH v5 01/11] examples/l3fwd: add framework for event device pbhagavatula
2020-01-24 4:05 ` [dpdk-dev] [PATCH v5 02/11] examples/l3fwd: split pipelines based on capability pbhagavatula
2020-01-24 4:05 ` [dpdk-dev] [PATCH v5 03/11] examples/l3fwd: add event device configuration pbhagavatula
2020-01-24 4:05 ` [dpdk-dev] [PATCH v5 04/11] examples/l3fwd: add ethdev setup based on eventdev pbhagavatula
2020-01-24 4:05 ` [dpdk-dev] [PATCH v5 05/11] examples/l3fwd: add event port and queue setup pbhagavatula
2020-01-24 4:05 ` [dpdk-dev] [PATCH v5 06/11] examples/l3fwd: add event eth Rx/Tx adapter setup pbhagavatula
2020-01-24 4:05 ` [dpdk-dev] [PATCH v5 07/11] examples/l3fwd: add service core setup based on caps pbhagavatula
2020-01-24 4:05 ` [dpdk-dev] [PATCH v5 08/11] examples/l3fwd: add event lpm main loop pbhagavatula
2020-01-24 4:05 ` [dpdk-dev] [PATCH v5 09/11] examples/l3fwd: add event em " pbhagavatula
2020-01-24 4:05 ` [dpdk-dev] [PATCH v5 10/11] examples/l3fwd: add graceful teardown for eventdevice pbhagavatula
2020-01-24 4:05 ` [dpdk-dev] [PATCH v5 11/11] doc: update l3fwd user guide to support eventdev pbhagavatula
2020-01-27 16:17 ` [dpdk-dev] [PATCH v5 00/11] example/l3fwd: introduce event device support Jerin Jacob
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200111134730.5329-9-pbhagavatula@marvell.com \
--to=pbhagavatula@marvell.com \
--cc=akhil.goyal@nxp.com \
--cc=bruce.richardson@intel.com \
--cc=dev@dpdk.org \
--cc=jerinj@marvell.com \
--cc=konstantin.ananyev@intel.com \
--cc=marko.kovacevic@intel.com \
--cc=orika@mellanox.com \
--cc=radu.nicolau@intel.com \
--cc=skori@marvell.com \
--cc=tomasz.kantecki@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).