DPDK patches and discussions
 help / color / mirror / Atom feed
From: Kalesh A P <kalesh-anakkur.purayil@broadcom.com>
To: dev@dpdk.org, ajit.khaparde@broadcom.com
Cc: ferruh.yigit@intel.com
Subject: [dpdk-dev] [PATCH 04/10] net/bnxt: fix enable/disable VLAN filtering
Date: Mon, 13 Jan 2020 10:06:03 +0530	[thread overview]
Message-ID: <20200113043609.27363-5-kalesh-anakkur.purayil@broadcom.com> (raw)
In-Reply-To: <20200113043609.27363-1-kalesh-anakkur.purayil@broadcom.com>

From: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>

There is no condition check for the user requested operation
for VLAN filtering. As a result, VLAN filtering is getting disabled
when the user enables/disables VLAN stripping on same port.

The function bnxt_hwrm_clear_l2_filter() didn't actually free
L2 filter in HW if the reference count of filter is zero.

Fixed it by incrementing the reference count of filter in
bnxt_alloc_filter() routine.

Because of the recent changes in bnxt_hwrm_clear_l2_filter(),
change was needed in the routine bnxt_set_default_mac_addr_op()
to destroy and re-create the default filter when the user
changes the default MAC of the port.

Fixes: 45eb28dd992b ("net/bnxt: fix to keep the L2 filter intact so it can be reused")
Fixes: 6118503d8071 ("net/bnxt: fix VLAN filtering")

Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Kumar Khaparde <ajit.khaparde@broadcom.com>
---
 drivers/net/bnxt/bnxt_ethdev.c | 66 +++++++++++++++++++++++-------------------
 drivers/net/bnxt/bnxt_filter.c |  5 ++--
 2 files changed, 39 insertions(+), 32 deletions(-)

diff --git a/drivers/net/bnxt/bnxt_ethdev.c b/drivers/net/bnxt/bnxt_ethdev.c
index a948c78..83f475d 100644
--- a/drivers/net/bnxt/bnxt_ethdev.c
+++ b/drivers/net/bnxt/bnxt_ethdev.c
@@ -1860,18 +1860,12 @@ static int bnxt_del_dflt_mac_filter(struct bnxt *bp,
 }
 
 static int
-bnxt_vlan_offload_set_op(struct rte_eth_dev *dev, int mask)
+bnxt_config_vlan_hw_filter(struct bnxt *bp, uint64_t rx_offloads)
 {
-	struct bnxt *bp = dev->data->dev_private;
-	uint64_t rx_offloads = dev->data->dev_conf.rxmode.offloads;
 	struct bnxt_vnic_info *vnic;
 	unsigned int i;
 	int rc;
 
-	rc = is_bnxt_in_error(bp);
-	if (rc)
-		return rc;
-
 	vnic = BNXT_GET_DEFAULT_VNIC(bp);
 	if (!(rx_offloads & DEV_RX_OFFLOAD_VLAN_FILTER)) {
 		/* Remove any VLAN filters programmed */
@@ -1895,6 +1889,28 @@ bnxt_vlan_offload_set_op(struct rte_eth_dev *dev, int mask)
 	PMD_DRV_LOG(DEBUG, "VLAN Filtering: %d\n",
 		    !!(rx_offloads & DEV_RX_OFFLOAD_VLAN_FILTER));
 
+	return 0;
+}
+
+static int
+bnxt_vlan_offload_set_op(struct rte_eth_dev *dev, int mask)
+{
+	uint64_t rx_offloads = dev->data->dev_conf.rxmode.offloads;
+	struct bnxt *bp = dev->data->dev_private;
+	unsigned int i;
+	int rc;
+
+	rc = is_bnxt_in_error(bp);
+	if (rc)
+		return rc;
+
+	if (mask & ETH_VLAN_FILTER_MASK) {
+		/* Enable or disable VLAN filtering */
+		rc = bnxt_config_vlan_hw_filter(bp, rx_offloads);
+		if (rc)
+			return rc;
+	}
+
 	if (mask & ETH_VLAN_STRIP_MASK) {
 		/* Enable or disable VLAN stripping */
 		for (i = 0; i < bp->nr_vnics; i++) {
@@ -1984,7 +2000,6 @@ bnxt_set_default_mac_addr_op(struct rte_eth_dev *dev,
 	struct bnxt *bp = dev->data->dev_private;
 	/* Default Filter is tied to VNIC 0 */
 	struct bnxt_vnic_info *vnic = BNXT_GET_DEFAULT_VNIC(bp);
-	struct bnxt_filter_info *filter;
 	int rc;
 
 	rc = is_bnxt_in_error(bp);
@@ -1997,32 +2012,23 @@ bnxt_set_default_mac_addr_op(struct rte_eth_dev *dev,
 	if (rte_is_zero_ether_addr(addr))
 		return -EINVAL;
 
-	STAILQ_FOREACH(filter, &vnic->filter, next) {
-		/* Default Filter is at Index 0 */
-		if (filter->mac_index != 0)
-			continue;
-
-		memcpy(filter->l2_addr, addr, RTE_ETHER_ADDR_LEN);
-		memset(filter->l2_addr_mask, 0xff, RTE_ETHER_ADDR_LEN);
-		filter->flags |= HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_RX |
-			HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_OUTERMOST;
-		filter->enables |=
-			HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_ADDR |
-			HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_ADDR_MASK;
+	/* Check if the requested MAC is already added */
+	if (memcmp(addr, bp->mac_addr, RTE_ETHER_ADDR_LEN) == 0)
+		return 0;
 
-		rc = bnxt_hwrm_set_l2_filter(bp, vnic->fw_vnic_id, filter);
-		if (rc) {
-			memcpy(filter->l2_addr, bp->mac_addr,
-			       RTE_ETHER_ADDR_LEN);
-			return rc;
-		}
+	/* Destroy filter and re-create it */
+	bnxt_del_dflt_mac_filter(bp, vnic);
 
-		memcpy(bp->mac_addr, addr, RTE_ETHER_ADDR_LEN);
-		PMD_DRV_LOG(DEBUG, "Set MAC addr\n");
-		return 0;
+	memcpy(bp->mac_addr, addr, RTE_ETHER_ADDR_LEN);
+	if (dev->data->dev_conf.rxmode.offloads & DEV_RX_OFFLOAD_VLAN_FILTER) {
+		/* This filter will allow only untagged packets */
+		rc = bnxt_add_vlan_filter(bp, 0);
+	} else {
+		rc = bnxt_add_mac_filter(bp, vnic, addr, 0, 0);
 	}
 
-	return 0;
+	PMD_DRV_LOG(DEBUG, "Set MAC addr\n");
+	return rc;
 }
 
 static int
diff --git a/drivers/net/bnxt/bnxt_filter.c b/drivers/net/bnxt/bnxt_filter.c
index 0c410f8..b31f104 100644
--- a/drivers/net/bnxt/bnxt_filter.c
+++ b/drivers/net/bnxt/bnxt_filter.c
@@ -39,9 +39,10 @@ struct bnxt_filter_info *bnxt_alloc_filter(struct bnxt *bp)
 	filter->flags = HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_RX;
 	filter->enables = HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_ADDR |
 			HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_ADDR_MASK;
-	memcpy(filter->l2_addr, bp->eth_dev->data->mac_addrs->addr_bytes,
-	       RTE_ETHER_ADDR_LEN);
+	memcpy(filter->l2_addr, bp->mac_addr, RTE_ETHER_ADDR_LEN);
 	memset(filter->l2_addr_mask, 0xff, RTE_ETHER_ADDR_LEN);
+	/* bump up the reference count of filter */
+	filter->l2_ref_cnt++;
 	return filter;
 }
 
-- 
2.10.1


  parent reply	other threads:[~2020-01-13  4:19 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-13  4:35 [dpdk-dev] [PATCH 00/10] bnxt patch set with fixes Kalesh A P
2020-01-13  4:36 ` [dpdk-dev] [PATCH 01/10] net/bnxt: handle flow create failure Kalesh A P
2020-01-13  4:36 ` [dpdk-dev] [PATCH 02/10] net/bnxt: fix probe failure in FreeBSD Kalesh A P
2020-01-13  4:36 ` [dpdk-dev] [PATCH 03/10] net/bnxt: fix to use correct IOVA mapping Kalesh A P
2020-01-13  4:36 ` Kalesh A P [this message]
2020-01-13  4:36 ` [dpdk-dev] [PATCH 05/10] net/bnxt: fix enable/disable vlan strip Kalesh A P
2020-01-13  4:36 ` [dpdk-dev] [PATCH 06/10] net/bnxt: handle hw filter setting when port is stopped Kalesh A P
2020-01-13  4:36 ` [dpdk-dev] [PATCH 07/10] net/bnxt: fix a memory leak in port stop Kalesh A P
2020-01-13  4:36 ` [dpdk-dev] [PATCH 08/10] net/bnxt: use macro for PCI log format Kalesh A P
2020-01-13  4:36 ` [dpdk-dev] [PATCH 09/10] net/bnxt: release port upon close Kalesh A P
2020-01-13  4:36 ` [dpdk-dev] [PATCH 10/10] net/bnxt: fix to cap max rings to minimum of compl rings and stat contexts Kalesh A P

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200113043609.27363-5-kalesh-anakkur.purayil@broadcom.com \
    --to=kalesh-anakkur.purayil@broadcom.com \
    --cc=ajit.khaparde@broadcom.com \
    --cc=dev@dpdk.org \
    --cc=ferruh.yigit@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).