From: Kalesh A P <kalesh-anakkur.purayil@broadcom.com>
To: dev@dpdk.org
Cc: ferruh.yigit@intel.com, ajit.khaparde@broadcom.com
Subject: [dpdk-dev] [PATCH V2 06/10] net/bnxt: handle hw filter setting when port is stopped
Date: Mon, 13 Jan 2020 10:31:14 +0530 [thread overview]
Message-ID: <20200113050118.28719-7-kalesh-anakkur.purayil@broadcom.com> (raw)
In-Reply-To: <20200113050118.28719-1-kalesh-anakkur.purayil@broadcom.com>
From: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Driver destroy the vnic when the port is brought down.
Port hw filter setting such as promiscuos, allmulti and
vlan filtering will be applied when port is started.
Fixed to return success silently for these callbacks
when port is stopped. Also fixed to clear "bp->dev_stopped"
before invoking bnxt_vlan_offload_set_op() in bnxt_dev_start_op().
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
---
drivers/net/bnxt/bnxt_ethdev.c | 23 ++++++++++++++++++++++-
1 file changed, 22 insertions(+), 1 deletion(-)
diff --git a/drivers/net/bnxt/bnxt_ethdev.c b/drivers/net/bnxt/bnxt_ethdev.c
index 0b2c29b..436ecbb 100644
--- a/drivers/net/bnxt/bnxt_ethdev.c
+++ b/drivers/net/bnxt/bnxt_ethdev.c
@@ -870,6 +870,7 @@ static int bnxt_dev_start_op(struct rte_eth_dev *eth_dev)
eth_dev->data->scattered_rx = bnxt_scattered_rx(eth_dev);
bnxt_link_update(eth_dev, 1, ETH_LINK_UP);
+ bp->dev_stopped = 0;
if (rx_offloads & DEV_RX_OFFLOAD_VLAN_FILTER)
vlan_mask |= ETH_VLAN_FILTER_MASK;
@@ -884,7 +885,6 @@ static int bnxt_dev_start_op(struct rte_eth_dev *eth_dev)
bp->flags |= BNXT_FLAG_INIT_DONE;
eth_dev->data->dev_started = 1;
- bp->dev_stopped = 0;
pthread_mutex_lock(&bp->def_cp_lock);
bnxt_schedule_fw_health_check(bp);
pthread_mutex_unlock(&bp->def_cp_lock);
@@ -895,6 +895,7 @@ static int bnxt_dev_start_op(struct rte_eth_dev *eth_dev)
bnxt_shutdown_nic(bp);
bnxt_free_tx_mbufs(bp);
bnxt_free_rx_mbufs(bp);
+ bp->dev_stopped = 1;
return rc;
}
@@ -1168,6 +1169,10 @@ static int bnxt_promiscuous_enable_op(struct rte_eth_dev *eth_dev)
if (rc)
return rc;
+ /* Filter settings will get applied when port is started */
+ if (bp->dev_stopped == 1)
+ return 0;
+
if (bp->vnic_info == NULL)
return 0;
@@ -1193,6 +1198,10 @@ static int bnxt_promiscuous_disable_op(struct rte_eth_dev *eth_dev)
if (rc)
return rc;
+ /* Filter settings will get applied when port is started */
+ if (bp->dev_stopped == 1)
+ return 0;
+
if (bp->vnic_info == NULL)
return 0;
@@ -1218,6 +1227,10 @@ static int bnxt_allmulticast_enable_op(struct rte_eth_dev *eth_dev)
if (rc)
return rc;
+ /* Filter settings will get applied when port is started */
+ if (bp->dev_stopped == 1)
+ return 0;
+
if (bp->vnic_info == NULL)
return 0;
@@ -1243,6 +1256,10 @@ static int bnxt_allmulticast_disable_op(struct rte_eth_dev *eth_dev)
if (rc)
return rc;
+ /* Filter settings will get applied when port is started */
+ if (bp->dev_stopped == 1)
+ return 0;
+
if (bp->vnic_info == NULL)
return 0;
@@ -1963,6 +1980,10 @@ bnxt_vlan_offload_set_op(struct rte_eth_dev *dev, int mask)
if (rc)
return rc;
+ /* Filter settings will get applied when port is started */
+ if (bp->dev_stopped == 1)
+ return 0;
+
if (mask & ETH_VLAN_FILTER_MASK) {
/* Enable or disable VLAN filtering */
rc = bnxt_config_vlan_hw_filter(bp, rx_offloads);
--
2.10.1
next prev parent reply other threads:[~2020-01-13 4:45 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-13 5:01 [dpdk-dev] [PATCH V2 00/10] bnxt patchset with bug fixes Kalesh A P
2020-01-13 5:01 ` [dpdk-dev] [PATCH V2 01/10] net/bnxt: handle flow create failure Kalesh A P
2020-01-13 5:01 ` [dpdk-dev] [PATCH V2 02/10] net/bnxt: fix probe failure in FreeBSD Kalesh A P
2020-01-13 5:01 ` [dpdk-dev] [PATCH V2 03/10] net/bnxt: fix to use correct IOVA mapping Kalesh A P
2020-01-13 5:01 ` [dpdk-dev] [PATCH V2 04/10] net/bnxt: fix enable/disable VLAN filtering Kalesh A P
2020-01-13 5:01 ` [dpdk-dev] [PATCH V2 05/10] net/bnxt: fix enable/disable vlan strip Kalesh A P
2020-01-13 5:01 ` Kalesh A P [this message]
2020-01-13 5:01 ` [dpdk-dev] [PATCH V2 07/10] net/bnxt: fix a memory leak in port stop Kalesh A P
2020-01-13 5:01 ` [dpdk-dev] [PATCH V2 08/10] net/bnxt: use macro for PCI log format Kalesh A P
2020-01-13 5:01 ` [dpdk-dev] [PATCH V2 09/10] net/bnxt: release port upon close Kalesh A P
2020-01-13 5:01 ` [dpdk-dev] [PATCH V2 10/10] net/bnxt: fix to cap max rings to minimum of compl rings and stat contexts Kalesh A P
2020-01-14 5:14 ` [dpdk-dev] [PATCH v3 00/10] bnxt patchset with bug fixes Ajit Khaparde
2020-01-14 5:14 ` [dpdk-dev] [PATCH v3 01/10] net/bnxt: handle flow create failure Ajit Khaparde
2020-01-14 12:59 ` Ferruh Yigit
2020-01-14 5:14 ` [dpdk-dev] [PATCH v3 02/10] net/bnxt: fix probe failure in FreeBSD Ajit Khaparde
2020-01-14 5:14 ` [dpdk-dev] [PATCH v3 03/10] net/bnxt: fix to use correct IOVA mapping Ajit Khaparde
2020-01-14 5:14 ` [dpdk-dev] [PATCH v3 04/10] net/bnxt: fix enable/disable VLAN filtering Ajit Khaparde
2020-01-14 5:14 ` [dpdk-dev] [PATCH v3 05/10] net/bnxt: fix VLAN strip support Ajit Khaparde
2020-01-14 5:14 ` [dpdk-dev] [PATCH v3 06/10] net/bnxt: handle HW filter setting when port is stopped Ajit Khaparde
2020-01-14 5:14 ` [dpdk-dev] [PATCH v3 07/10] net/bnxt: fix a memory leak in port stop Ajit Khaparde
2020-01-14 5:14 ` [dpdk-dev] [PATCH v3 08/10] net/bnxt: use macro for PCI log format Ajit Khaparde
2020-01-14 5:14 ` [dpdk-dev] [PATCH v3 09/10] net/bnxt: release port upon close Ajit Khaparde
2020-01-14 12:56 ` Ferruh Yigit
2020-01-14 14:49 ` Somnath Kotur
2020-01-16 11:20 ` Ferruh Yigit
2020-01-16 11:30 ` Somnath Kotur
2020-01-14 5:14 ` [dpdk-dev] [PATCH v3 10/10] net/bnxt: fix calculation of max rings Ajit Khaparde
2020-01-14 5:27 ` [dpdk-dev] [PATCH v3 00/10] bnxt patchset with bug fixes Ajit Khaparde
2020-01-14 13:02 ` Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200113050118.28719-7-kalesh-anakkur.purayil@broadcom.com \
--to=kalesh-anakkur.purayil@broadcom.com \
--cc=ajit.khaparde@broadcom.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).