From: Harman Kalra <hkalra@marvell.com>
To: Sunil Kumar Kori <skori@marvell.com>
Cc: Jerin Jacob Kollanukkaran <jerinj@marvell.com>,
John McNamara <john.mcnamara@intel.com>,
Marko Kovacevic <marko.kovacevic@intel.com>,
"dev@dpdk.org" <dev@dpdk.org>
Subject: Re: [dpdk-dev] [PATCH] net/octeontx: add unicast MAC filter
Date: Tue, 14 Jan 2020 07:43:03 +0000 [thread overview]
Message-ID: <20200114074241.GA160869@outlook.office365.com> (raw)
In-Reply-To: <20200113061644.6320-1-skori@marvell.com>
On Mon, Jan 13, 2020 at 11:46:44AM +0530, Sunil Kumar Kori wrote:
> At BGX, DMAC filter table can be enabled to allow defined hosts.
> Patch implements 'mac_addr_add' and 'mac_addr_remove' ops to
> add/remove MAC filters which uses BGX DMAC filter table.
>
> Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Harman Kalra <hkalra@marvell.com>
> ---
> doc/guides/nics/features/octeontx.ini | 2 +-
> drivers/net/octeontx/base/octeontx_bgx.c | 55 ++++++++++++++++++++++++
> drivers/net/octeontx/base/octeontx_bgx.h | 6 +++
> drivers/net/octeontx/octeontx_ethdev.c | 50 +++++++++++++++++++--
> 4 files changed, 109 insertions(+), 4 deletions(-)
>
> diff --git a/doc/guides/nics/features/octeontx.ini b/doc/guides/nics/features/octeontx.ini
> index c92d5aa07..323befe59 100644
> --- a/doc/guides/nics/features/octeontx.ini
> +++ b/doc/guides/nics/features/octeontx.ini
> @@ -10,7 +10,7 @@ Lock-free Tx queue = Y
> Queue start/stop = P
> Jumbo frame = Y
> Promiscuous mode = Y
> -Unicast MAC filter = P
> +Unicast MAC filter = Y
> CRC offload = Y
> Packet type parsing = Y
> Basic stats = Y
> diff --git a/drivers/net/octeontx/base/octeontx_bgx.c b/drivers/net/octeontx/base/octeontx_bgx.c
> index 0e2388264..e70255b11 100644
> --- a/drivers/net/octeontx/base/octeontx_bgx.c
> +++ b/drivers/net/octeontx/base/octeontx_bgx.c
> @@ -243,3 +243,58 @@ octeontx_bgx_port_mac_set(int port, uint8_t *mac_addr)
>
> return res;
> }
> +
> +int
> +octeontx_bgx_port_mac_add(int port, uint8_t *mac_addr)
> +{
> + struct octeontx_mbox_hdr hdr;
> + int resp = 0;
> + int len = 6;
> + int res = 0;
> +
> + hdr.coproc = OCTEONTX_BGX_COPROC;
> + hdr.msg = MBOX_BGX_PORT_ADD_MACADDR;
> + hdr.vfid = port;
> +
> + res = octeontx_mbox_send(&hdr, mac_addr, len, &resp, sizeof(int));
> + if (res < 0)
> + return -EACCES;
> +
> + return res;
> +}
> +
> +int
> +octeontx_bgx_port_mac_del(int port, uint32_t index)
> +{
> + struct octeontx_mbox_hdr hdr;
> + int len = sizeof(uint32_t);
> + int res = 0;
> +
> + hdr.coproc = OCTEONTX_BGX_COPROC;
> + hdr.msg = MBOX_BGX_PORT_DEL_MACADDR;
> + hdr.vfid = port;
> +
> + res = octeontx_mbox_send(&hdr, &index, len, NULL, 0);
> + if (res < 0)
> + return -EACCES;
> +
> + return res;
> +}
> +
> +int
> +octeontx_bgx_port_mac_entries_get(int port)
> +{
> + struct octeontx_mbox_hdr hdr;
> + int resp = 6;
> + int res = 0;
> +
> + hdr.coproc = OCTEONTX_BGX_COPROC;
> + hdr.msg = MBOX_BGX_PORT_GET_MACADDR_ENTRIES;
> + hdr.vfid = port;
> +
> + res = octeontx_mbox_send(&hdr, NULL, 0, &resp, sizeof(int));
> + if (res < 0)
> + return -EACCES;
> +
> + return resp;
> +}
> diff --git a/drivers/net/octeontx/base/octeontx_bgx.h b/drivers/net/octeontx/base/octeontx_bgx.h
> index a9bbaf2c3..caaff179c 100644
> --- a/drivers/net/octeontx/base/octeontx_bgx.h
> +++ b/drivers/net/octeontx/base/octeontx_bgx.h
> @@ -28,6 +28,9 @@
> #define MBOX_BGX_PORT_SET_BCAST 12
> #define MBOX_BGX_PORT_SET_MCAST 13
> #define MBOX_BGX_PORT_SET_MTU 14
> +#define MBOX_BGX_PORT_ADD_MACADDR 15
> +#define MBOX_BGX_PORT_DEL_MACADDR 16
> +#define MBOX_BGX_PORT_GET_MACADDR_ENTRIES 17
>
> /* BGX port configuration parameters: */
> typedef struct octeontx_mbox_bgx_port_conf {
> @@ -120,6 +123,9 @@ int octeontx_bgx_port_stats_clr(int port);
> int octeontx_bgx_port_link_status(int port);
> int octeontx_bgx_port_promisc_set(int port, int en);
> int octeontx_bgx_port_mac_set(int port, uint8_t *mac_addr);
> +int octeontx_bgx_port_mac_add(int port, uint8_t *mac_addr);
> +int octeontx_bgx_port_mac_del(int port, uint32_t index);
> +int octeontx_bgx_port_mac_entries_get(int port);
>
> #endif /* __OCTEONTX_BGX_H__ */
>
> diff --git a/drivers/net/octeontx/octeontx_ethdev.c b/drivers/net/octeontx/octeontx_ethdev.c
> index 679803dd4..e23162d8a 100644
> --- a/drivers/net/octeontx/octeontx_ethdev.c
> +++ b/drivers/net/octeontx/octeontx_ethdev.c
> @@ -558,6 +558,37 @@ octeontx_dev_stats_reset(struct rte_eth_dev *dev)
> return octeontx_port_stats_clr(nic);
> }
>
> +static void
> +octeontx_dev_mac_addr_del(struct rte_eth_dev *dev, uint32_t index)
> +{
> + struct octeontx_nic *nic = octeontx_pmd_priv(dev);
> + int ret;
> +
> + ret = octeontx_bgx_port_mac_del(nic->port_id, index);
> + if (ret != 0)
> + octeontx_log_err("failed to del MAC address filter on port %d",
> + nic->port_id);
> +}
> +
> +static int
> +octeontx_dev_mac_addr_add(struct rte_eth_dev *dev,
> + struct rte_ether_addr *mac_addr,
> + __rte_unused uint32_t index,
> + __rte_unused uint32_t vmdq)
> +{
> + struct octeontx_nic *nic = octeontx_pmd_priv(dev);
> + int ret;
> +
> + ret = octeontx_bgx_port_mac_add(nic->port_id, mac_addr->addr_bytes);
> + if (ret < 0) {
> + octeontx_log_err("failed to add MAC address filter on port %d",
> + nic->port_id);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> static int
> octeontx_dev_default_mac_addr_set(struct rte_eth_dev *dev,
> struct rte_ether_addr *addr)
> @@ -577,7 +608,7 @@ static int
> octeontx_dev_info(struct rte_eth_dev *dev,
> struct rte_eth_dev_info *dev_info)
> {
> - RTE_SET_USED(dev);
> + struct octeontx_nic *nic = octeontx_pmd_priv(dev);
>
> /* Autonegotiation may be disabled */
> dev_info->speed_capa = ETH_LINK_SPEED_FIXED;
> @@ -585,7 +616,8 @@ octeontx_dev_info(struct rte_eth_dev *dev,
> ETH_LINK_SPEED_1G | ETH_LINK_SPEED_10G |
> ETH_LINK_SPEED_40G;
>
> - dev_info->max_mac_addrs = 1;
> + dev_info->max_mac_addrs =
> + octeontx_bgx_port_mac_entries_get(nic->port_id);
> dev_info->max_rx_pktlen = PKI_MAX_PKTLEN;
> dev_info->max_rx_queues = 1;
> dev_info->max_tx_queues = PKO_MAX_NUM_DQ;
> @@ -986,6 +1018,8 @@ static const struct eth_dev_ops octeontx_dev_ops = {
> .link_update = octeontx_dev_link_update,
> .stats_get = octeontx_dev_stats_get,
> .stats_reset = octeontx_dev_stats_reset,
> + .mac_addr_remove = octeontx_dev_mac_addr_del,
> + .mac_addr_add = octeontx_dev_mac_addr_add,
> .mac_addr_set = octeontx_dev_default_mac_addr_set,
> .tx_queue_start = octeontx_dev_tx_queue_start,
> .tx_queue_stop = octeontx_dev_tx_queue_stop,
> @@ -1009,6 +1043,7 @@ octeontx_create(struct rte_vdev_device *dev, int port, uint8_t evdev,
> struct rte_eth_dev *eth_dev = NULL;
> struct rte_eth_dev_data *data;
> const char *name = rte_vdev_device_name(dev);
> + int max_entries;
>
> PMD_INIT_FUNC_TRACE();
>
> @@ -1082,7 +1117,16 @@ octeontx_create(struct rte_vdev_device *dev, int port, uint8_t evdev,
> data->all_multicast = 0;
> data->scattered_rx = 0;
>
> - data->mac_addrs = rte_zmalloc_socket(octtx_name, RTE_ETHER_ADDR_LEN, 0,
> + /* Get maximum number of supported MAC entries */
> + max_entries = octeontx_bgx_port_mac_entries_get(nic->port_id);
> + if (max_entries < 0) {
> + octeontx_log_err("Failed to get max entries for mac addr");
> + res = -ENOTSUP;
> + goto err;
> + }
> +
> + data->mac_addrs = rte_zmalloc_socket(octtx_name, max_entries *
> + RTE_ETHER_ADDR_LEN, 0,
> socket_id);
> if (data->mac_addrs == NULL) {
> octeontx_log_err("failed to allocate memory for mac_addrs");
> --
> 2.17.1
>
next prev parent reply other threads:[~2020-01-14 7:43 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-13 6:16 Sunil Kumar Kori
2020-01-14 7:43 ` Harman Kalra [this message]
2020-01-14 7:45 ` Jerin Jacob
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200114074241.GA160869@outlook.office365.com \
--to=hkalra@marvell.com \
--cc=dev@dpdk.org \
--cc=jerinj@marvell.com \
--cc=john.mcnamara@intel.com \
--cc=marko.kovacevic@intel.com \
--cc=skori@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).