From: <pbhagavatula@marvell.com>
To: <jerinj@marvell.com>, <konstantin.ananyev@intel.com>,
Marko Kovacevic <marko.kovacevic@intel.com>,
Ori Kam <orika@mellanox.com>,
Bruce Richardson <bruce.richardson@intel.com>,
Radu Nicolau <radu.nicolau@intel.com>,
"Akhil Goyal" <akhil.goyal@nxp.com>,
Tomasz Kantecki <tomasz.kantecki@intel.com>,
Sunil Kumar Kori <skori@marvell.com>,
Pavan Nikhilesh <pbhagavatula@marvell.com>
Cc: <dev@dpdk.org>
Subject: [dpdk-dev] [PATCH v5 02/11] examples/l3fwd: split pipelines based on capability
Date: Fri, 24 Jan 2020 09:35:33 +0530 [thread overview]
Message-ID: <20200124040542.2360-3-pbhagavatula@marvell.com> (raw)
In-Reply-To: <20200124040542.2360-1-pbhagavatula@marvell.com>
From: Sunil Kumar Kori <skori@marvell.com>
Add infra to split eventdev framework based on event Tx adapter
capability.
If event Tx adapter has internal port capability then we use
`rte_event_eth_tx_adapter_enqueue` to transmitting packets else
we use a SINGLE_LINK event queue to enqueue packets to a service
core which is responsible for transmitting packets.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
---
examples/l3fwd/Makefile | 1 +
examples/l3fwd/l3fwd_event.c | 31 ++++++++++++++++++++++
examples/l3fwd/l3fwd_event.h | 20 ++++++++++++++
examples/l3fwd/l3fwd_event_generic.c | 14 ++++++++++
examples/l3fwd/l3fwd_event_internal_port.c | 14 ++++++++++
examples/l3fwd/meson.build | 3 ++-
6 files changed, 82 insertions(+), 1 deletion(-)
create mode 100644 examples/l3fwd/l3fwd_event_generic.c
create mode 100644 examples/l3fwd/l3fwd_event_internal_port.c
diff --git a/examples/l3fwd/Makefile b/examples/l3fwd/Makefile
index c892b867b..59a110d12 100644
--- a/examples/l3fwd/Makefile
+++ b/examples/l3fwd/Makefile
@@ -6,6 +6,7 @@ APP = l3fwd
# all source are stored in SRCS-y
SRCS-y := main.c l3fwd_lpm.c l3fwd_em.c l3fwd_event.c
+SRCS-y += l3fwd_event_generic.c l3fwd_event_internal_port.c
# Build using pkg-config variables if possible
ifeq ($(shell pkg-config --exists libdpdk && echo 0),0)
diff --git a/examples/l3fwd/l3fwd_event.c b/examples/l3fwd/l3fwd_event.c
index 1040da4ea..62218f3ca 100644
--- a/examples/l3fwd/l3fwd_event.c
+++ b/examples/l3fwd/l3fwd_event.c
@@ -30,6 +30,31 @@ l3fwd_get_eventdev_rsrc(void)
return NULL;
}
+static void
+l3fwd_event_capability_setup(void)
+{
+ struct l3fwd_event_resources *evt_rsrc = l3fwd_get_eventdev_rsrc();
+ uint32_t caps = 0;
+ uint16_t i;
+ int ret;
+
+ RTE_ETH_FOREACH_DEV(i) {
+ ret = rte_event_eth_tx_adapter_caps_get(0, i, &caps);
+ if (ret)
+ rte_exit(EXIT_FAILURE,
+ "Invalid capability for Tx adptr port %d\n",
+ i);
+
+ evt_rsrc->tx_mode_q |= !(caps &
+ RTE_EVENT_ETH_TX_ADAPTER_CAP_INTERNAL_PORT);
+ }
+
+ if (evt_rsrc->tx_mode_q)
+ l3fwd_event_set_generic_ops(&evt_rsrc->ops);
+ else
+ l3fwd_event_set_internal_port_ops(&evt_rsrc->ops);
+}
+
void
l3fwd_event_resource_setup(void)
{
@@ -37,4 +62,10 @@ l3fwd_event_resource_setup(void)
if (!evt_rsrc->enabled)
return;
+
+ if (!rte_event_dev_count())
+ rte_exit(EXIT_FAILURE, "No Eventdev found");
+
+ /* Setup eventdev capability callbacks */
+ l3fwd_event_capability_setup();
}
diff --git a/examples/l3fwd/l3fwd_event.h b/examples/l3fwd/l3fwd_event.h
index 4c23c4e1a..d25c8d222 100644
--- a/examples/l3fwd/l3fwd_event.h
+++ b/examples/l3fwd/l3fwd_event.h
@@ -7,17 +7,37 @@
#include <rte_common.h>
#include <rte_eventdev.h>
+#include <rte_event_eth_tx_adapter.h>
#include <rte_spinlock.h>
#include "l3fwd.h"
+typedef uint32_t (*event_device_setup_cb)(void);
+typedef void (*event_queue_setup_cb)(uint32_t event_queue_cfg);
+typedef void (*event_port_setup_cb)(void);
+typedef void (*adapter_setup_cb)(void);
+typedef int (*event_loop_cb)(void *);
+
+struct l3fwd_event_setup_ops {
+ event_device_setup_cb event_device_setup;
+ event_queue_setup_cb event_queue_setup;
+ event_port_setup_cb event_port_setup;
+ adapter_setup_cb adapter_setup;
+ event_loop_cb lpm_event_loop;
+ event_loop_cb em_event_loop;
+};
+
struct l3fwd_event_resources {
+ struct l3fwd_event_setup_ops ops;
uint8_t sched_type;
+ uint8_t tx_mode_q;
uint8_t enabled;
uint8_t eth_rx_queues;
};
struct l3fwd_event_resources *l3fwd_get_eventdev_rsrc(void);
void l3fwd_event_resource_setup(void);
+void l3fwd_event_set_generic_ops(struct l3fwd_event_setup_ops *ops);
+void l3fwd_event_set_internal_port_ops(struct l3fwd_event_setup_ops *ops);
#endif /* __L3FWD_EVENTDEV_H__ */
diff --git a/examples/l3fwd/l3fwd_event_generic.c b/examples/l3fwd/l3fwd_event_generic.c
new file mode 100644
index 000000000..7fff850e5
--- /dev/null
+++ b/examples/l3fwd/l3fwd_event_generic.c
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(C) 2019 Marvell International Ltd.
+ */
+
+#include <stdbool.h>
+
+#include "l3fwd.h"
+#include "l3fwd_event.h"
+
+void
+l3fwd_event_set_generic_ops(struct l3fwd_event_setup_ops *ops)
+{
+ RTE_SET_USED(ops);
+}
diff --git a/examples/l3fwd/l3fwd_event_internal_port.c b/examples/l3fwd/l3fwd_event_internal_port.c
new file mode 100644
index 000000000..085e9c825
--- /dev/null
+++ b/examples/l3fwd/l3fwd_event_internal_port.c
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(C) 2019 Marvell International Ltd.
+ */
+
+#include <stdbool.h>
+
+#include "l3fwd.h"
+#include "l3fwd_event.h"
+
+void
+l3fwd_event_set_internal_port_ops(struct l3fwd_event_setup_ops *ops)
+{
+ RTE_SET_USED(ops);
+}
diff --git a/examples/l3fwd/meson.build b/examples/l3fwd/meson.build
index 864327c7b..ebed3b518 100644
--- a/examples/l3fwd/meson.build
+++ b/examples/l3fwd/meson.build
@@ -8,5 +8,6 @@
deps += ['hash', 'lpm', 'eventdev']
sources = files(
- 'l3fwd_em.c', 'l3fwd_lpm.c', 'l3fwd_event.c', 'main.c'
+ 'l3fwd_em.c', 'l3fwd_lpm.c', 'l3fwd_event.c',
+ 'l3fwd_event_internal_port.c', 'l3fwd_event_generic.c', 'main.c'
)
--
2.17.1
next prev parent reply other threads:[~2020-01-24 4:06 UTC|newest]
Thread overview: 78+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-04 14:43 [dpdk-dev] [PATCH v2 00/11] example/l3fwd: introduce event device support pbhagavatula
2019-12-04 14:43 ` [dpdk-dev] [PATCH v2 01/11] examples/l3fwd: add framework for event device pbhagavatula
2020-01-03 12:49 ` Ananyev, Konstantin
2020-01-06 4:27 ` Pavan Nikhilesh Bhagavatula
2020-01-06 12:32 ` Ananyev, Konstantin
2020-01-07 16:34 ` Pavan Nikhilesh Bhagavatula
2019-12-04 14:43 ` [dpdk-dev] [PATCH v2 02/11] examples/l3fwd: split pipelines based on capability pbhagavatula
2019-12-04 14:43 ` [dpdk-dev] [PATCH v2 03/11] examples/l3fwd: add event device configuration pbhagavatula
2019-12-04 14:43 ` [dpdk-dev] [PATCH v2 04/11] examples/l3fwd: add ethdev setup based on eventdev pbhagavatula
2019-12-27 13:33 ` Nipun Gupta
2019-12-29 15:42 ` Pavan Nikhilesh Bhagavatula
2019-12-30 7:40 ` Nipun Gupta
2020-01-02 6:21 ` Pavan Nikhilesh Bhagavatula
2020-01-02 8:49 ` Nipun Gupta
2020-01-02 9:33 ` Jerin Jacob
2020-01-03 9:06 ` Nipun Gupta
2020-01-03 9:09 ` Jerin Jacob
2019-12-04 14:43 ` [dpdk-dev] [PATCH v2 05/11] examples/l3fwd: add event port and queue setup pbhagavatula
2019-12-04 14:43 ` [dpdk-dev] [PATCH v2 06/11] examples/l3fwd: add event eth Rx/Tx adapter setup pbhagavatula
2019-12-04 14:43 ` [dpdk-dev] [PATCH v2 07/11] examples/l3fwd: add service core setup based on caps pbhagavatula
2020-01-03 13:07 ` Ananyev, Konstantin
2020-01-06 4:29 ` Pavan Nikhilesh Bhagavatula
2019-12-04 14:43 ` [dpdk-dev] [PATCH v2 08/11] examples/l3fwd: add event lpm main loop pbhagavatula
2020-01-03 13:16 ` Ananyev, Konstantin
2020-01-06 4:43 ` Pavan Nikhilesh Bhagavatula
2019-12-04 14:43 ` [dpdk-dev] [PATCH v2 09/11] examples/l3fwd: add event em " pbhagavatula
2020-01-03 13:45 ` Ananyev, Konstantin
2020-01-06 4:44 ` Pavan Nikhilesh Bhagavatula
2020-01-06 12:27 ` Ananyev, Konstantin
2019-12-04 14:43 ` [dpdk-dev] [PATCH v2 10/11] examples/l3fwd: add graceful teardown for eventdevice pbhagavatula
2020-01-03 13:52 ` Ananyev, Konstantin
2020-01-06 4:50 ` Pavan Nikhilesh Bhagavatula
2020-01-06 12:12 ` Ananyev, Konstantin
2020-01-07 16:28 ` Pavan Nikhilesh Bhagavatula
2019-12-04 14:43 ` [dpdk-dev] [PATCH v2 11/11] doc: update l3fwd user guide to support eventdev pbhagavatula
2019-12-04 15:16 ` [dpdk-dev] [PATCH v2 00/11] example/l3fwd: introduce event device support Jerin Jacob
2020-01-11 13:47 ` [dpdk-dev] [PATCH v3 " pbhagavatula
2020-01-11 13:47 ` [dpdk-dev] [PATCH v3 01/11] examples/l3fwd: add framework for event device pbhagavatula
2020-01-21 8:44 ` Jerin Jacob
2020-01-11 13:47 ` [dpdk-dev] [PATCH v3 02/11] examples/l3fwd: split pipelines based on capability pbhagavatula
2020-01-21 8:46 ` Jerin Jacob
2020-01-11 13:47 ` [dpdk-dev] [PATCH v3 03/11] examples/l3fwd: add event device configuration pbhagavatula
2020-01-21 8:51 ` Jerin Jacob
2020-01-11 13:47 ` [dpdk-dev] [PATCH v3 04/11] examples/l3fwd: add ethdev setup based on eventdev pbhagavatula
2020-01-11 13:47 ` [dpdk-dev] [PATCH v3 05/11] examples/l3fwd: add event port and queue setup pbhagavatula
2020-01-11 13:47 ` [dpdk-dev] [PATCH v3 06/11] examples/l3fwd: add event eth Rx/Tx adapter setup pbhagavatula
2020-01-11 13:47 ` [dpdk-dev] [PATCH v3 07/11] examples/l3fwd: add service core setup based on caps pbhagavatula
2020-01-11 13:47 ` [dpdk-dev] [PATCH v3 08/11] examples/l3fwd: add event lpm main loop pbhagavatula
2020-01-11 13:47 ` [dpdk-dev] [PATCH v3 09/11] examples/l3fwd: add event em " pbhagavatula
2020-01-11 13:47 ` [dpdk-dev] [PATCH v3 10/11] examples/l3fwd: add graceful teardown for eventdevice pbhagavatula
2020-01-11 13:47 ` [dpdk-dev] [PATCH v3 11/11] doc: update l3fwd user guide to support eventdev pbhagavatula
2020-01-13 12:02 ` [dpdk-dev] [PATCH v3 00/11] example/l3fwd: introduce event device support Nipun Gupta
2020-01-22 18:28 ` [dpdk-dev] [PATCH v4 " pbhagavatula
2020-01-22 18:28 ` [dpdk-dev] [PATCH v4 01/11] examples/l3fwd: add framework for event device pbhagavatula
2020-01-22 18:28 ` [dpdk-dev] [PATCH v4 02/11] examples/l3fwd: split pipelines based on capability pbhagavatula
2020-01-22 18:28 ` [dpdk-dev] [PATCH v4 03/11] examples/l3fwd: add event device configuration pbhagavatula
2020-01-22 18:28 ` [dpdk-dev] [PATCH v4 04/11] examples/l3fwd: add ethdev setup based on eventdev pbhagavatula
2020-01-22 18:28 ` [dpdk-dev] [PATCH v4 05/11] examples/l3fwd: add event port and queue setup pbhagavatula
2020-01-22 18:28 ` [dpdk-dev] [PATCH v4 06/11] examples/l3fwd: add event eth Rx/Tx adapter setup pbhagavatula
2020-01-22 18:28 ` [dpdk-dev] [PATCH v4 07/11] examples/l3fwd: add service core setup based on caps pbhagavatula
2020-01-22 18:28 ` [dpdk-dev] [PATCH v4 08/11] examples/l3fwd: add event lpm main loop pbhagavatula
2020-01-22 18:28 ` [dpdk-dev] [PATCH v4 09/11] examples/l3fwd: add event em " pbhagavatula
2020-01-22 18:28 ` [dpdk-dev] [PATCH v4 10/11] examples/l3fwd: add graceful teardown for eventdevice pbhagavatula
2020-01-22 18:28 ` [dpdk-dev] [PATCH v4 11/11] doc: update l3fwd user guide to support eventdev pbhagavatula
2020-01-23 5:25 ` Jerin Jacob
2020-01-24 4:05 ` [dpdk-dev] [PATCH v5 00/11] example/l3fwd: introduce event device support pbhagavatula
2020-01-24 4:05 ` [dpdk-dev] [PATCH v5 01/11] examples/l3fwd: add framework for event device pbhagavatula
2020-01-24 4:05 ` pbhagavatula [this message]
2020-01-24 4:05 ` [dpdk-dev] [PATCH v5 03/11] examples/l3fwd: add event device configuration pbhagavatula
2020-01-24 4:05 ` [dpdk-dev] [PATCH v5 04/11] examples/l3fwd: add ethdev setup based on eventdev pbhagavatula
2020-01-24 4:05 ` [dpdk-dev] [PATCH v5 05/11] examples/l3fwd: add event port and queue setup pbhagavatula
2020-01-24 4:05 ` [dpdk-dev] [PATCH v5 06/11] examples/l3fwd: add event eth Rx/Tx adapter setup pbhagavatula
2020-01-24 4:05 ` [dpdk-dev] [PATCH v5 07/11] examples/l3fwd: add service core setup based on caps pbhagavatula
2020-01-24 4:05 ` [dpdk-dev] [PATCH v5 08/11] examples/l3fwd: add event lpm main loop pbhagavatula
2020-01-24 4:05 ` [dpdk-dev] [PATCH v5 09/11] examples/l3fwd: add event em " pbhagavatula
2020-01-24 4:05 ` [dpdk-dev] [PATCH v5 10/11] examples/l3fwd: add graceful teardown for eventdevice pbhagavatula
2020-01-24 4:05 ` [dpdk-dev] [PATCH v5 11/11] doc: update l3fwd user guide to support eventdev pbhagavatula
2020-01-27 16:17 ` [dpdk-dev] [PATCH v5 00/11] example/l3fwd: introduce event device support Jerin Jacob
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200124040542.2360-3-pbhagavatula@marvell.com \
--to=pbhagavatula@marvell.com \
--cc=akhil.goyal@nxp.com \
--cc=bruce.richardson@intel.com \
--cc=dev@dpdk.org \
--cc=jerinj@marvell.com \
--cc=konstantin.ananyev@intel.com \
--cc=marko.kovacevic@intel.com \
--cc=orika@mellanox.com \
--cc=radu.nicolau@intel.com \
--cc=skori@marvell.com \
--cc=tomasz.kantecki@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).