From: <pbhagavatula@marvell.com>
To: <jerinj@marvell.com>, <konstantin.ananyev@intel.com>,
Marko Kovacevic <marko.kovacevic@intel.com>,
Ori Kam <orika@mellanox.com>,
Bruce Richardson <bruce.richardson@intel.com>,
Radu Nicolau <radu.nicolau@intel.com>,
"Akhil Goyal" <akhil.goyal@nxp.com>,
Tomasz Kantecki <tomasz.kantecki@intel.com>,
Sunil Kumar Kori <skori@marvell.com>,
Pavan Nikhilesh <pbhagavatula@marvell.com>
Cc: <dev@dpdk.org>
Subject: [dpdk-dev] [PATCH v5 05/11] examples/l3fwd: add event port and queue setup
Date: Fri, 24 Jan 2020 09:35:36 +0530 [thread overview]
Message-ID: <20200124040542.2360-6-pbhagavatula@marvell.com> (raw)
In-Reply-To: <20200124040542.2360-1-pbhagavatula@marvell.com>
From: Sunil Kumar Kori <skori@marvell.com>
Add event device queue and port setup based on event eth Tx adapter
capabilities.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
---
examples/l3fwd/l3fwd_event.c | 28 +++++-
examples/l3fwd/l3fwd_event.h | 1 +
examples/l3fwd/l3fwd_event_generic.c | 103 +++++++++++++++++++++
examples/l3fwd/l3fwd_event_internal_port.c | 98 ++++++++++++++++++++
4 files changed, 229 insertions(+), 1 deletion(-)
diff --git a/examples/l3fwd/l3fwd_event.c b/examples/l3fwd/l3fwd_event.c
index f9491ecc6..b58f9b79a 100644
--- a/examples/l3fwd/l3fwd_event.c
+++ b/examples/l3fwd/l3fwd_event.c
@@ -188,10 +188,30 @@ l3fwd_event_capability_setup(void)
l3fwd_event_set_internal_port_ops(&evt_rsrc->ops);
}
+int
+l3fwd_get_free_event_port(struct l3fwd_event_resources *evt_rsrc)
+{
+ static int index;
+ int port_id;
+
+ rte_spinlock_lock(&evt_rsrc->evp.lock);
+ if (index >= evt_rsrc->evp.nb_ports) {
+ printf("No free event port is available\n");
+ return -1;
+ }
+
+ port_id = evt_rsrc->evp.event_p_id[index];
+ index++;
+ rte_spinlock_unlock(&evt_rsrc->evp.lock);
+
+ return port_id;
+}
+
void
l3fwd_event_resource_setup(struct rte_eth_conf *port_conf)
{
struct l3fwd_event_resources *evt_rsrc = l3fwd_get_eventdev_rsrc();
+ uint32_t event_queue_cfg;
if (!evt_rsrc->enabled)
return;
@@ -206,5 +226,11 @@ l3fwd_event_resource_setup(struct rte_eth_conf *port_conf)
l3fwd_eth_dev_port_setup(port_conf);
/* Event device configuration */
- evt_rsrc->ops.event_device_setup();
+ event_queue_cfg = evt_rsrc->ops.event_device_setup();
+
+ /* Event queue configuration */
+ evt_rsrc->ops.event_queue_setup(event_queue_cfg);
+
+ /* Event port configuration */
+ evt_rsrc->ops.event_port_setup();
}
diff --git a/examples/l3fwd/l3fwd_event.h b/examples/l3fwd/l3fwd_event.h
index 53feea069..4bceca920 100644
--- a/examples/l3fwd/l3fwd_event.h
+++ b/examples/l3fwd/l3fwd_event.h
@@ -73,6 +73,7 @@ struct l3fwd_event_resources {
struct l3fwd_event_resources *l3fwd_get_eventdev_rsrc(void);
void l3fwd_event_resource_setup(struct rte_eth_conf *port_conf);
+int l3fwd_get_free_event_port(struct l3fwd_event_resources *eventdev_rsrc);
void l3fwd_event_set_generic_ops(struct l3fwd_event_setup_ops *ops);
void l3fwd_event_set_internal_port_ops(struct l3fwd_event_setup_ops *ops);
diff --git a/examples/l3fwd/l3fwd_event_generic.c b/examples/l3fwd/l3fwd_event_generic.c
index c831cfd66..2532839bf 100644
--- a/examples/l3fwd/l3fwd_event_generic.c
+++ b/examples/l3fwd/l3fwd_event_generic.c
@@ -81,8 +81,111 @@ l3fwd_event_device_setup_generic(void)
return event_queue_cfg;
}
+static void
+l3fwd_event_port_setup_generic(void)
+{
+ struct l3fwd_event_resources *evt_rsrc = l3fwd_get_eventdev_rsrc();
+ uint8_t event_d_id = evt_rsrc->event_d_id;
+ struct rte_event_port_conf event_p_conf = {
+ .dequeue_depth = 32,
+ .enqueue_depth = 32,
+ .new_event_threshold = 4096
+ };
+ struct rte_event_port_conf def_p_conf;
+ uint8_t event_p_id;
+ int32_t ret;
+
+ evt_rsrc->evp.event_p_id = (uint8_t *)malloc(sizeof(uint8_t) *
+ evt_rsrc->evp.nb_ports);
+ if (!evt_rsrc->evp.event_p_id)
+ rte_panic("No space is available\n");
+
+ memset(&def_p_conf, 0, sizeof(struct rte_event_port_conf));
+ rte_event_port_default_conf_get(event_d_id, 0, &def_p_conf);
+
+ if (def_p_conf.new_event_threshold < event_p_conf.new_event_threshold)
+ event_p_conf.new_event_threshold =
+ def_p_conf.new_event_threshold;
+
+ if (def_p_conf.dequeue_depth < event_p_conf.dequeue_depth)
+ event_p_conf.dequeue_depth = def_p_conf.dequeue_depth;
+
+ if (def_p_conf.enqueue_depth < event_p_conf.enqueue_depth)
+ event_p_conf.enqueue_depth = def_p_conf.enqueue_depth;
+
+ event_p_conf.disable_implicit_release =
+ evt_rsrc->disable_implicit_release;
+ evt_rsrc->deq_depth = def_p_conf.dequeue_depth;
+
+ for (event_p_id = 0; event_p_id < evt_rsrc->evp.nb_ports;
+ event_p_id++) {
+ ret = rte_event_port_setup(event_d_id, event_p_id,
+ &event_p_conf);
+ if (ret < 0)
+ rte_panic("Error in configuring event port %d\n",
+ event_p_id);
+
+ ret = rte_event_port_link(event_d_id, event_p_id,
+ evt_rsrc->evq.event_q_id,
+ NULL,
+ evt_rsrc->evq.nb_queues - 1);
+ if (ret != (evt_rsrc->evq.nb_queues - 1))
+ rte_panic("Error in linking event port %d to queues\n",
+ event_p_id);
+ evt_rsrc->evp.event_p_id[event_p_id] = event_p_id;
+ }
+ /* init spinlock */
+ rte_spinlock_init(&evt_rsrc->evp.lock);
+
+ evt_rsrc->def_p_conf = event_p_conf;
+}
+
+static void
+l3fwd_event_queue_setup_generic(uint32_t event_queue_cfg)
+{
+ struct l3fwd_event_resources *evt_rsrc = l3fwd_get_eventdev_rsrc();
+ uint8_t event_d_id = evt_rsrc->event_d_id;
+ struct rte_event_queue_conf event_q_conf = {
+ .nb_atomic_flows = 1024,
+ .nb_atomic_order_sequences = 1024,
+ .event_queue_cfg = event_queue_cfg,
+ .priority = RTE_EVENT_DEV_PRIORITY_NORMAL
+ };
+ struct rte_event_queue_conf def_q_conf;
+ uint8_t event_q_id;
+ int32_t ret;
+
+ event_q_conf.schedule_type = evt_rsrc->sched_type;
+ evt_rsrc->evq.event_q_id = (uint8_t *)malloc(sizeof(uint8_t) *
+ evt_rsrc->evq.nb_queues);
+ if (!evt_rsrc->evq.event_q_id)
+ rte_panic("Memory allocation failure\n");
+
+ rte_event_queue_default_conf_get(event_d_id, 0, &def_q_conf);
+ if (def_q_conf.nb_atomic_flows < event_q_conf.nb_atomic_flows)
+ event_q_conf.nb_atomic_flows = def_q_conf.nb_atomic_flows;
+
+ for (event_q_id = 0; event_q_id < (evt_rsrc->evq.nb_queues - 1);
+ event_q_id++) {
+ ret = rte_event_queue_setup(event_d_id, event_q_id,
+ &event_q_conf);
+ if (ret < 0)
+ rte_panic("Error in configuring event queue\n");
+ evt_rsrc->evq.event_q_id[event_q_id] = event_q_id;
+ }
+
+ event_q_conf.event_queue_cfg |= RTE_EVENT_QUEUE_CFG_SINGLE_LINK;
+ event_q_conf.priority = RTE_EVENT_DEV_PRIORITY_HIGHEST,
+ ret = rte_event_queue_setup(event_d_id, event_q_id, &event_q_conf);
+ if (ret < 0)
+ rte_panic("Error in configuring event queue for Tx adapter\n");
+ evt_rsrc->evq.event_q_id[event_q_id] = event_q_id;
+}
+
void
l3fwd_event_set_generic_ops(struct l3fwd_event_setup_ops *ops)
{
ops->event_device_setup = l3fwd_event_device_setup_generic;
+ ops->event_queue_setup = l3fwd_event_queue_setup_generic;
+ ops->event_port_setup = l3fwd_event_port_setup_generic;
}
diff --git a/examples/l3fwd/l3fwd_event_internal_port.c b/examples/l3fwd/l3fwd_event_internal_port.c
index f3e1ab3a2..59b7d35b7 100644
--- a/examples/l3fwd/l3fwd_event_internal_port.c
+++ b/examples/l3fwd/l3fwd_event_internal_port.c
@@ -80,9 +80,107 @@ l3fwd_event_device_setup_internal_port(void)
return event_queue_cfg;
}
+static void
+l3fwd_event_port_setup_internal_port(void)
+{
+ struct l3fwd_event_resources *evt_rsrc = l3fwd_get_eventdev_rsrc();
+ uint8_t event_d_id = evt_rsrc->event_d_id;
+ struct rte_event_port_conf event_p_conf = {
+ .dequeue_depth = 32,
+ .enqueue_depth = 32,
+ .new_event_threshold = 4096
+ };
+ struct rte_event_port_conf def_p_conf;
+ uint8_t event_p_id;
+ int32_t ret;
+
+ evt_rsrc->evp.event_p_id = (uint8_t *)malloc(sizeof(uint8_t) *
+ evt_rsrc->evp.nb_ports);
+ if (!evt_rsrc->evp.event_p_id)
+ rte_panic("Failed to allocate memory for Event Ports\n");
+
+ rte_event_port_default_conf_get(event_d_id, 0, &def_p_conf);
+ if (def_p_conf.new_event_threshold < event_p_conf.new_event_threshold)
+ event_p_conf.new_event_threshold =
+ def_p_conf.new_event_threshold;
+
+ if (def_p_conf.dequeue_depth < event_p_conf.dequeue_depth)
+ event_p_conf.dequeue_depth = def_p_conf.dequeue_depth;
+
+ if (def_p_conf.enqueue_depth < event_p_conf.enqueue_depth)
+ event_p_conf.enqueue_depth = def_p_conf.enqueue_depth;
+
+ event_p_conf.disable_implicit_release =
+ evt_rsrc->disable_implicit_release;
+
+ for (event_p_id = 0; event_p_id < evt_rsrc->evp.nb_ports;
+ event_p_id++) {
+ ret = rte_event_port_setup(event_d_id, event_p_id,
+ &event_p_conf);
+ if (ret < 0)
+ rte_panic("Error in configuring event port %d\n",
+ event_p_id);
+
+ ret = rte_event_port_link(event_d_id, event_p_id, NULL,
+ NULL, 0);
+ if (ret < 0)
+ rte_panic("Error in linking event port %d to queue\n",
+ event_p_id);
+ evt_rsrc->evp.event_p_id[event_p_id] = event_p_id;
+
+ /* init spinlock */
+ rte_spinlock_init(&evt_rsrc->evp.lock);
+ }
+
+ evt_rsrc->def_p_conf = event_p_conf;
+}
+
+static void
+l3fwd_event_queue_setup_internal_port(uint32_t event_queue_cfg)
+{
+ struct l3fwd_event_resources *evt_rsrc = l3fwd_get_eventdev_rsrc();
+ uint8_t event_d_id = evt_rsrc->event_d_id;
+ struct rte_event_queue_conf event_q_conf = {
+ .nb_atomic_flows = 1024,
+ .nb_atomic_order_sequences = 1024,
+ .event_queue_cfg = event_queue_cfg,
+ .priority = RTE_EVENT_DEV_PRIORITY_NORMAL
+ };
+ struct rte_event_queue_conf def_q_conf;
+ uint8_t event_q_id = 0;
+ int32_t ret;
+
+ rte_event_queue_default_conf_get(event_d_id, event_q_id, &def_q_conf);
+
+ if (def_q_conf.nb_atomic_flows < event_q_conf.nb_atomic_flows)
+ event_q_conf.nb_atomic_flows = def_q_conf.nb_atomic_flows;
+
+ if (def_q_conf.nb_atomic_order_sequences <
+ event_q_conf.nb_atomic_order_sequences)
+ event_q_conf.nb_atomic_order_sequences =
+ def_q_conf.nb_atomic_order_sequences;
+
+ event_q_conf.event_queue_cfg = event_queue_cfg;
+ event_q_conf.schedule_type = evt_rsrc->sched_type;
+ evt_rsrc->evq.event_q_id = (uint8_t *)malloc(sizeof(uint8_t) *
+ evt_rsrc->evq.nb_queues);
+ if (!evt_rsrc->evq.event_q_id)
+ rte_panic("Memory allocation failure\n");
+
+ for (event_q_id = 0; event_q_id < evt_rsrc->evq.nb_queues;
+ event_q_id++) {
+ ret = rte_event_queue_setup(event_d_id, event_q_id,
+ &event_q_conf);
+ if (ret < 0)
+ rte_panic("Error in configuring event queue\n");
+ evt_rsrc->evq.event_q_id[event_q_id] = event_q_id;
+ }
+}
void
l3fwd_event_set_internal_port_ops(struct l3fwd_event_setup_ops *ops)
{
ops->event_device_setup = l3fwd_event_device_setup_internal_port;
+ ops->event_queue_setup = l3fwd_event_queue_setup_internal_port;
+ ops->event_port_setup = l3fwd_event_port_setup_internal_port;
}
--
2.17.1
next prev parent reply other threads:[~2020-01-24 4:06 UTC|newest]
Thread overview: 78+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-04 14:43 [dpdk-dev] [PATCH v2 00/11] example/l3fwd: introduce event device support pbhagavatula
2019-12-04 14:43 ` [dpdk-dev] [PATCH v2 01/11] examples/l3fwd: add framework for event device pbhagavatula
2020-01-03 12:49 ` Ananyev, Konstantin
2020-01-06 4:27 ` Pavan Nikhilesh Bhagavatula
2020-01-06 12:32 ` Ananyev, Konstantin
2020-01-07 16:34 ` Pavan Nikhilesh Bhagavatula
2019-12-04 14:43 ` [dpdk-dev] [PATCH v2 02/11] examples/l3fwd: split pipelines based on capability pbhagavatula
2019-12-04 14:43 ` [dpdk-dev] [PATCH v2 03/11] examples/l3fwd: add event device configuration pbhagavatula
2019-12-04 14:43 ` [dpdk-dev] [PATCH v2 04/11] examples/l3fwd: add ethdev setup based on eventdev pbhagavatula
2019-12-27 13:33 ` Nipun Gupta
2019-12-29 15:42 ` Pavan Nikhilesh Bhagavatula
2019-12-30 7:40 ` Nipun Gupta
2020-01-02 6:21 ` Pavan Nikhilesh Bhagavatula
2020-01-02 8:49 ` Nipun Gupta
2020-01-02 9:33 ` Jerin Jacob
2020-01-03 9:06 ` Nipun Gupta
2020-01-03 9:09 ` Jerin Jacob
2019-12-04 14:43 ` [dpdk-dev] [PATCH v2 05/11] examples/l3fwd: add event port and queue setup pbhagavatula
2019-12-04 14:43 ` [dpdk-dev] [PATCH v2 06/11] examples/l3fwd: add event eth Rx/Tx adapter setup pbhagavatula
2019-12-04 14:43 ` [dpdk-dev] [PATCH v2 07/11] examples/l3fwd: add service core setup based on caps pbhagavatula
2020-01-03 13:07 ` Ananyev, Konstantin
2020-01-06 4:29 ` Pavan Nikhilesh Bhagavatula
2019-12-04 14:43 ` [dpdk-dev] [PATCH v2 08/11] examples/l3fwd: add event lpm main loop pbhagavatula
2020-01-03 13:16 ` Ananyev, Konstantin
2020-01-06 4:43 ` Pavan Nikhilesh Bhagavatula
2019-12-04 14:43 ` [dpdk-dev] [PATCH v2 09/11] examples/l3fwd: add event em " pbhagavatula
2020-01-03 13:45 ` Ananyev, Konstantin
2020-01-06 4:44 ` Pavan Nikhilesh Bhagavatula
2020-01-06 12:27 ` Ananyev, Konstantin
2019-12-04 14:43 ` [dpdk-dev] [PATCH v2 10/11] examples/l3fwd: add graceful teardown for eventdevice pbhagavatula
2020-01-03 13:52 ` Ananyev, Konstantin
2020-01-06 4:50 ` Pavan Nikhilesh Bhagavatula
2020-01-06 12:12 ` Ananyev, Konstantin
2020-01-07 16:28 ` Pavan Nikhilesh Bhagavatula
2019-12-04 14:43 ` [dpdk-dev] [PATCH v2 11/11] doc: update l3fwd user guide to support eventdev pbhagavatula
2019-12-04 15:16 ` [dpdk-dev] [PATCH v2 00/11] example/l3fwd: introduce event device support Jerin Jacob
2020-01-11 13:47 ` [dpdk-dev] [PATCH v3 " pbhagavatula
2020-01-11 13:47 ` [dpdk-dev] [PATCH v3 01/11] examples/l3fwd: add framework for event device pbhagavatula
2020-01-21 8:44 ` Jerin Jacob
2020-01-11 13:47 ` [dpdk-dev] [PATCH v3 02/11] examples/l3fwd: split pipelines based on capability pbhagavatula
2020-01-21 8:46 ` Jerin Jacob
2020-01-11 13:47 ` [dpdk-dev] [PATCH v3 03/11] examples/l3fwd: add event device configuration pbhagavatula
2020-01-21 8:51 ` Jerin Jacob
2020-01-11 13:47 ` [dpdk-dev] [PATCH v3 04/11] examples/l3fwd: add ethdev setup based on eventdev pbhagavatula
2020-01-11 13:47 ` [dpdk-dev] [PATCH v3 05/11] examples/l3fwd: add event port and queue setup pbhagavatula
2020-01-11 13:47 ` [dpdk-dev] [PATCH v3 06/11] examples/l3fwd: add event eth Rx/Tx adapter setup pbhagavatula
2020-01-11 13:47 ` [dpdk-dev] [PATCH v3 07/11] examples/l3fwd: add service core setup based on caps pbhagavatula
2020-01-11 13:47 ` [dpdk-dev] [PATCH v3 08/11] examples/l3fwd: add event lpm main loop pbhagavatula
2020-01-11 13:47 ` [dpdk-dev] [PATCH v3 09/11] examples/l3fwd: add event em " pbhagavatula
2020-01-11 13:47 ` [dpdk-dev] [PATCH v3 10/11] examples/l3fwd: add graceful teardown for eventdevice pbhagavatula
2020-01-11 13:47 ` [dpdk-dev] [PATCH v3 11/11] doc: update l3fwd user guide to support eventdev pbhagavatula
2020-01-13 12:02 ` [dpdk-dev] [PATCH v3 00/11] example/l3fwd: introduce event device support Nipun Gupta
2020-01-22 18:28 ` [dpdk-dev] [PATCH v4 " pbhagavatula
2020-01-22 18:28 ` [dpdk-dev] [PATCH v4 01/11] examples/l3fwd: add framework for event device pbhagavatula
2020-01-22 18:28 ` [dpdk-dev] [PATCH v4 02/11] examples/l3fwd: split pipelines based on capability pbhagavatula
2020-01-22 18:28 ` [dpdk-dev] [PATCH v4 03/11] examples/l3fwd: add event device configuration pbhagavatula
2020-01-22 18:28 ` [dpdk-dev] [PATCH v4 04/11] examples/l3fwd: add ethdev setup based on eventdev pbhagavatula
2020-01-22 18:28 ` [dpdk-dev] [PATCH v4 05/11] examples/l3fwd: add event port and queue setup pbhagavatula
2020-01-22 18:28 ` [dpdk-dev] [PATCH v4 06/11] examples/l3fwd: add event eth Rx/Tx adapter setup pbhagavatula
2020-01-22 18:28 ` [dpdk-dev] [PATCH v4 07/11] examples/l3fwd: add service core setup based on caps pbhagavatula
2020-01-22 18:28 ` [dpdk-dev] [PATCH v4 08/11] examples/l3fwd: add event lpm main loop pbhagavatula
2020-01-22 18:28 ` [dpdk-dev] [PATCH v4 09/11] examples/l3fwd: add event em " pbhagavatula
2020-01-22 18:28 ` [dpdk-dev] [PATCH v4 10/11] examples/l3fwd: add graceful teardown for eventdevice pbhagavatula
2020-01-22 18:28 ` [dpdk-dev] [PATCH v4 11/11] doc: update l3fwd user guide to support eventdev pbhagavatula
2020-01-23 5:25 ` Jerin Jacob
2020-01-24 4:05 ` [dpdk-dev] [PATCH v5 00/11] example/l3fwd: introduce event device support pbhagavatula
2020-01-24 4:05 ` [dpdk-dev] [PATCH v5 01/11] examples/l3fwd: add framework for event device pbhagavatula
2020-01-24 4:05 ` [dpdk-dev] [PATCH v5 02/11] examples/l3fwd: split pipelines based on capability pbhagavatula
2020-01-24 4:05 ` [dpdk-dev] [PATCH v5 03/11] examples/l3fwd: add event device configuration pbhagavatula
2020-01-24 4:05 ` [dpdk-dev] [PATCH v5 04/11] examples/l3fwd: add ethdev setup based on eventdev pbhagavatula
2020-01-24 4:05 ` pbhagavatula [this message]
2020-01-24 4:05 ` [dpdk-dev] [PATCH v5 06/11] examples/l3fwd: add event eth Rx/Tx adapter setup pbhagavatula
2020-01-24 4:05 ` [dpdk-dev] [PATCH v5 07/11] examples/l3fwd: add service core setup based on caps pbhagavatula
2020-01-24 4:05 ` [dpdk-dev] [PATCH v5 08/11] examples/l3fwd: add event lpm main loop pbhagavatula
2020-01-24 4:05 ` [dpdk-dev] [PATCH v5 09/11] examples/l3fwd: add event em " pbhagavatula
2020-01-24 4:05 ` [dpdk-dev] [PATCH v5 10/11] examples/l3fwd: add graceful teardown for eventdevice pbhagavatula
2020-01-24 4:05 ` [dpdk-dev] [PATCH v5 11/11] doc: update l3fwd user guide to support eventdev pbhagavatula
2020-01-27 16:17 ` [dpdk-dev] [PATCH v5 00/11] example/l3fwd: introduce event device support Jerin Jacob
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200124040542.2360-6-pbhagavatula@marvell.com \
--to=pbhagavatula@marvell.com \
--cc=akhil.goyal@nxp.com \
--cc=bruce.richardson@intel.com \
--cc=dev@dpdk.org \
--cc=jerinj@marvell.com \
--cc=konstantin.ananyev@intel.com \
--cc=marko.kovacevic@intel.com \
--cc=orika@mellanox.com \
--cc=radu.nicolau@intel.com \
--cc=skori@marvell.com \
--cc=tomasz.kantecki@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).