From: <vattunuru@marvell.com>
To: <dev@dpdk.org>
Cc: <jerinj@marvell.com>, Vamsi Attunuru <vattunuru@marvell.com>,
<stable@dpdk.org>
Subject: [dpdk-dev] [PATCH v1 1/1] net/octeontx2: fix flow control initial state
Date: Thu, 6 Feb 2020 09:57:13 +0530 [thread overview]
Message-ID: <20200206042713.6761-1-vattunuru@marvell.com> (raw)
From: Vamsi Attunuru <vattunuru@marvell.com>
Currently when application requests for RTE_FC_NONE earlier
than PMD's internal fc mode update, flow control set routine
is returning without updating the flow control state.
Patch updates the PMD's internal fc mode details during
dev_configure to ensure any flow control set requests
issued later are handled properly.
Fixes: 609945f1ce90 ("net/octeontx2: support flow control")
Cc: stable@dpdk.org
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
---
drivers/net/octeontx2/otx2_ethdev.c | 6 ++++++
drivers/net/octeontx2/otx2_ethdev.h | 2 ++
drivers/net/octeontx2/otx2_flow_ctrl.c | 35 ++++++++++++++++++++++++++++++----
3 files changed, 39 insertions(+), 4 deletions(-)
diff --git a/drivers/net/octeontx2/otx2_ethdev.c b/drivers/net/octeontx2/otx2_ethdev.c
index 1ec234b..25b1c5c 100644
--- a/drivers/net/octeontx2/otx2_ethdev.c
+++ b/drivers/net/octeontx2/otx2_ethdev.c
@@ -1727,6 +1727,12 @@ otx2_nix_configure(struct rte_eth_dev *eth_dev)
goto cq_fini;
}
+ rc = otx2_nix_flow_ctrl_init(eth_dev);
+ if (rc) {
+ otx2_err("Failed to init flow ctrl mode %d", rc);
+ goto cq_fini;
+ }
+
rc = otx2_nix_mc_addr_list_install(eth_dev);
if (rc < 0) {
otx2_err("Failed to install mc address list rc=%d", rc);
diff --git a/drivers/net/octeontx2/otx2_ethdev.h b/drivers/net/octeontx2/otx2_ethdev.h
index 49fed95..4b3ad95 100644
--- a/drivers/net/octeontx2/otx2_ethdev.h
+++ b/drivers/net/octeontx2/otx2_ethdev.h
@@ -509,6 +509,8 @@ int otx2_cgx_mac_addr_set(struct rte_eth_dev *eth_dev,
struct rte_ether_addr *addr);
/* Flow Control */
+int otx2_nix_flow_ctrl_init(struct rte_eth_dev *eth_dev);
+
int otx2_nix_flow_ctrl_get(struct rte_eth_dev *eth_dev,
struct rte_eth_fc_conf *fc_conf);
diff --git a/drivers/net/octeontx2/otx2_flow_ctrl.c b/drivers/net/octeontx2/otx2_flow_ctrl.c
index 1c6929e..76bf481 100644
--- a/drivers/net/octeontx2/otx2_flow_ctrl.c
+++ b/drivers/net/octeontx2/otx2_flow_ctrl.c
@@ -200,16 +200,14 @@ int
otx2_nix_update_flow_ctrl_mode(struct rte_eth_dev *eth_dev)
{
struct otx2_eth_dev *dev = otx2_eth_pmd_priv(eth_dev);
+ struct otx2_fc_info *fc = &dev->fc_info;
struct rte_eth_fc_conf fc_conf;
if (otx2_dev_is_lbk(dev) || otx2_dev_is_sdp(dev))
return 0;
memset(&fc_conf, 0, sizeof(struct rte_eth_fc_conf));
- /* Both Rx & Tx flow ctrl get enabled(RTE_FC_FULL) in HW
- * by AF driver, update those info in PMD structure.
- */
- otx2_nix_flow_ctrl_get(eth_dev, &fc_conf);
+ fc_conf.mode = fc->mode;
/* To avoid Link credit deadlock on Ax, disable Tx FC if it's enabled */
if (otx2_dev_is_Ax(dev) &&
@@ -223,3 +221,32 @@ otx2_nix_update_flow_ctrl_mode(struct rte_eth_dev *eth_dev)
return otx2_nix_flow_ctrl_set(eth_dev, &fc_conf);
}
+
+int
+otx2_nix_flow_ctrl_init(struct rte_eth_dev *eth_dev)
+{
+ struct otx2_eth_dev *dev = otx2_eth_pmd_priv(eth_dev);
+ struct otx2_fc_info *fc = &dev->fc_info;
+ struct rte_eth_fc_conf fc_conf;
+ int rc;
+
+ if (otx2_dev_is_lbk(dev) || otx2_dev_is_sdp(dev))
+ return 0;
+
+ memset(&fc_conf, 0, sizeof(struct rte_eth_fc_conf));
+ /* Both Rx & Tx flow ctrl get enabled(RTE_FC_FULL) in HW
+ * by AF driver, update those info in PMD structure.
+ */
+ rc = otx2_nix_flow_ctrl_get(eth_dev, &fc_conf);
+ if (rc)
+ goto exit;
+
+ fc->mode = fc_conf.mode;
+ fc->rx_pause = (fc_conf.mode == RTE_FC_FULL) ||
+ (fc_conf.mode == RTE_FC_RX_PAUSE);
+ fc->tx_pause = (fc_conf.mode == RTE_FC_FULL) ||
+ (fc_conf.mode == RTE_FC_TX_PAUSE);
+
+exit:
+ return rc;
+}
--
2.8.4
next reply other threads:[~2020-02-06 4:27 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-06 4:27 vattunuru [this message]
2020-02-15 9:24 ` Jerin Jacob
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200206042713.6761-1-vattunuru@marvell.com \
--to=vattunuru@marvell.com \
--cc=dev@dpdk.org \
--cc=jerinj@marvell.com \
--cc=stable@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).