From: Ciara Loftus <ciara.loftus@intel.com>
To: dev@dpdk.org
Cc: Ciara Loftus <ciara.loftus@intel.com>, stable@dpdk.org
Subject: [dpdk-dev] [PATCH 2/3] net/af_xdp: use correct fill queue addresses
Date: Fri, 7 Feb 2020 14:50:57 +0000 [thread overview]
Message-ID: <20200207145058.78137-3-ciara.loftus@intel.com> (raw)
In-Reply-To: <20200207145058.78137-1-ciara.loftus@intel.com>
The fill queue addresses should start at the beginning of the mempool
object instead of the beginning of the mbuf. This is because the umem frame
headroom includes the mp hdrobj size. Starting at this point ensures AF_XDP
doesn't write past the available room in the frame, in the case of larger
packets which are close to the size of the mbuf.
Fixes: d8a210774e1d ("net/af_xdp: support unaligned umem chunks")
Cc: stable@dpdk.org
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
---
drivers/net/af_xdp/rte_eth_af_xdp.c | 24 ++++++++++++++++--------
1 file changed, 16 insertions(+), 8 deletions(-)
diff --git a/drivers/net/af_xdp/rte_eth_af_xdp.c b/drivers/net/af_xdp/rte_eth_af_xdp.c
index 8b189119c..ebc64d4dd 100644
--- a/drivers/net/af_xdp/rte_eth_af_xdp.c
+++ b/drivers/net/af_xdp/rte_eth_af_xdp.c
@@ -172,7 +172,8 @@ reserve_fill_queue_zc(struct xsk_umem_info *umem, uint16_t reserve_size,
uint64_t addr;
fq_addr = xsk_ring_prod__fill_addr(fq, idx++);
- addr = (uint64_t)bufs[i] - (uint64_t)umem->buffer;
+ addr = (uint64_t)bufs[i] - (uint64_t)umem->buffer -
+ umem->mb_pool->header_size;
*fq_addr = addr;
}
@@ -271,8 +272,10 @@ af_xdp_rx_zc(void *queue, struct rte_mbuf **bufs, uint16_t nb_pkts)
addr = xsk_umem__extract_addr(addr);
bufs[i] = (struct rte_mbuf *)
- xsk_umem__get_data(umem->buffer, addr);
- bufs[i]->data_off = offset - sizeof(struct rte_mbuf);
+ xsk_umem__get_data(umem->buffer, addr +
+ umem->mb_pool->header_size);
+ bufs[i]->data_off = offset - sizeof(struct rte_mbuf) -
+ umem->mb_pool->header_size;
rte_pktmbuf_pkt_len(bufs[i]) = len;
rte_pktmbuf_data_len(bufs[i]) = len;
@@ -385,7 +388,8 @@ pull_umem_cq(struct xsk_umem_info *umem, int size)
#if defined(XDP_UMEM_UNALIGNED_CHUNK_FLAG)
addr = xsk_umem__extract_addr(addr);
rte_pktmbuf_free((struct rte_mbuf *)
- xsk_umem__get_data(umem->buffer, addr));
+ xsk_umem__get_data(umem->buffer,
+ addr + umem->mb_pool->header_size));
#else
rte_ring_enqueue(umem->buf_ring, (void *)addr);
#endif
@@ -443,9 +447,11 @@ af_xdp_tx_zc(void *queue, struct rte_mbuf **bufs, uint16_t nb_pkts)
}
desc = xsk_ring_prod__tx_desc(&txq->tx, idx_tx);
desc->len = mbuf->pkt_len;
- addr = (uint64_t)mbuf - (uint64_t)umem->buffer;
+ addr = (uint64_t)mbuf - (uint64_t)umem->buffer -
+ umem->mb_pool->header_size;
offset = rte_pktmbuf_mtod(mbuf, uint64_t) -
- (uint64_t)mbuf;
+ (uint64_t)mbuf +
+ umem->mb_pool->header_size;
offset = offset << XSK_UNALIGNED_BUF_OFFSET_SHIFT;
desc->addr = addr | offset;
count++;
@@ -466,9 +472,11 @@ af_xdp_tx_zc(void *queue, struct rte_mbuf **bufs, uint16_t nb_pkts)
desc = xsk_ring_prod__tx_desc(&txq->tx, idx_tx);
desc->len = mbuf->pkt_len;
- addr = (uint64_t)local_mbuf - (uint64_t)umem->buffer;
+ addr = (uint64_t)local_mbuf - (uint64_t)umem->buffer -
+ umem->mb_pool->header_size;
offset = rte_pktmbuf_mtod(local_mbuf, uint64_t) -
- (uint64_t)local_mbuf;
+ (uint64_t)local_mbuf +
+ umem->mb_pool->header_size;
pkt = xsk_umem__get_data(umem->buffer, addr + offset);
offset = offset << XSK_UNALIGNED_BUF_OFFSET_SHIFT;
desc->addr = addr | offset;
--
2.17.1
next prev parent reply other threads:[~2020-02-07 14:50 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-07 14:50 [dpdk-dev] [PATCH 0/3] AF_XDP PMD Fixes Ciara Loftus
2020-02-07 14:50 ` [dpdk-dev] [PATCH 1/3] net/af_xdp: fix umem frame size & headroom calculations Ciara Loftus
2020-02-07 14:50 ` Ciara Loftus [this message]
2020-02-07 14:50 ` [dpdk-dev] [PATCH 3/3] net/af_xdp: fix maximum MTU value Ciara Loftus
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200207145058.78137-3-ciara.loftus@intel.com \
--to=ciara.loftus@intel.com \
--cc=dev@dpdk.org \
--cc=stable@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).