From: Thomas Monjalon <thomas@monjalon.net>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH 1/2] config: deduplicate options
Date: Wed, 12 Feb 2020 00:57:23 +0100 [thread overview]
Message-ID: <20200211235724.2970097-2-thomas@monjalon.net> (raw)
In-Reply-To: <20200211235724.2970097-1-thomas@monjalon.net>
Some config options are overwritten with the same value
as the one inherited from its template parent.
Such duplicates which have no meaningful comments are removed.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
---
config/common_armv8a_linux | 2 --
config/common_linux | 6 ------
config/defconfig_arm-armv7a-linuxapp-gcc | 9 ---------
config/defconfig_arm64-octeontx2-linuxapp-gcc | 4 ----
config/defconfig_arm64-stingray-linuxapp-gcc | 2 --
config/defconfig_arm64-thunderx-linuxapp-gcc | 1 -
6 files changed, 24 deletions(-)
diff --git a/config/common_armv8a_linux b/config/common_armv8a_linux
index 433e66c7d8..020f8f006c 100644
--- a/config/common_armv8a_linux
+++ b/config/common_armv8a_linux
@@ -41,5 +41,3 @@ CONFIG_RTE_LIBRTE_PMD_IOAT_RAWDEV=n
# NXP PFE PMD Driver
#
CONFIG_RTE_LIBRTE_PFE_PMD=y
-
-CONFIG_RTE_SCHED_VECTOR=n
diff --git a/config/common_linux b/config/common_linux
index 583efadc7d..816810671a 100644
--- a/config/common_linux
+++ b/config/common_linux
@@ -66,9 +66,3 @@ CONFIG_RTE_LIBRTE_HINIC_PMD=y
# Hisilicon HNS3 PMD driver
#
CONFIG_RTE_LIBRTE_HNS3_PMD=y
-
-#
-# Compile PMD for Intel FPGA raw device
-# To compile, CONFIG_RTE_EAL_VFIO should be enabled.
-#
-CONFIG_RTE_LIBRTE_PMD_IFPGA_RAWDEV=n
diff --git a/config/defconfig_arm-armv7a-linuxapp-gcc b/config/defconfig_arm-armv7a-linuxapp-gcc
index 6ac7f47e47..9ecc2a526c 100644
--- a/config/defconfig_arm-armv7a-linuxapp-gcc
+++ b/config/defconfig_arm-armv7a-linuxapp-gcc
@@ -30,14 +30,7 @@ CONFIG_RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT=n
# KNI is not supported on 32-bit
CONFIG_RTE_LIBRTE_KNI=n
-# PCI is usually not used on ARM
-CONFIG_RTE_EAL_IGB_UIO=n
-
-# fails to compile on ARM
-CONFIG_RTE_SCHED_VECTOR=n
-
# cannot use those on ARM
-CONFIG_RTE_KNI_KMOD=n
CONFIG_RTE_LIBRTE_ARK_PMD=n
CONFIG_RTE_LIBRTE_EM_PMD=n
CONFIG_RTE_LIBRTE_IGB_PMD=n
@@ -47,9 +40,7 @@ CONFIG_RTE_LIBRTE_ENIC_PMD=n
CONFIG_RTE_LIBRTE_FM10K_PMD=n
CONFIG_RTE_LIBRTE_I40E_PMD=n
CONFIG_RTE_LIBRTE_IXGBE_PMD=n
-CONFIG_RTE_LIBRTE_MLX4_PMD=n
CONFIG_RTE_LIBRTE_VMXNET3_PMD=n
-CONFIG_RTE_LIBRTE_BNX2X_PMD=n
CONFIG_RTE_LIBRTE_QEDE_PMD=n
CONFIG_RTE_LIBRTE_SFC_EFX_PMD=n
CONFIG_RTE_LIBRTE_AVP_PMD=n
diff --git a/config/defconfig_arm64-octeontx2-linuxapp-gcc b/config/defconfig_arm64-octeontx2-linuxapp-gcc
index 7687dbec8d..7cfb81872c 100644
--- a/config/defconfig_arm64-octeontx2-linuxapp-gcc
+++ b/config/defconfig_arm64-octeontx2-linuxapp-gcc
@@ -6,7 +6,6 @@
CONFIG_RTE_MACHINE="octeontx2"
-CONFIG_RTE_CACHE_LINE_SIZE=128
CONFIG_RTE_MAX_NUMA_NODES=1
CONFIG_RTE_MAX_LCORE=24
CONFIG_RTE_ARM_FEATURE_ATOMICS=y
@@ -15,8 +14,5 @@ CONFIG_RTE_ARM_FEATURE_ATOMICS=y
CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=n
CONFIG_RTE_LIBRTE_VHOST_NUMA=n
-# Recommend to use VFIO as co-processors needs SMMU/IOMMU
-CONFIG_RTE_EAL_IGB_UIO=n
-
# Max supported NIX LFs
CONFIG_RTE_MAX_VFIO_GROUPS=128
diff --git a/config/defconfig_arm64-stingray-linuxapp-gcc b/config/defconfig_arm64-stingray-linuxapp-gcc
index 7b33aa7afb..2a6f6cee28 100644
--- a/config/defconfig_arm64-stingray-linuxapp-gcc
+++ b/config/defconfig_arm64-stingray-linuxapp-gcc
@@ -5,7 +5,6 @@
#include "defconfig_arm64-armv8a-linux-gcc"
# Broadcom - Stingray
-CONFIG_RTE_MACHINE="armv8a"
CONFIG_RTE_ARCH_ARM_TUNE="cortex-a72"
# Doesn't support NUMA
@@ -13,4 +12,3 @@ CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=n
CONFIG_RTE_LIBRTE_VHOST_NUMA=n
CONFIG_RTE_EAL_IGB_UIO=y
-CONFIG_RTE_KNI_KMOD=n
diff --git a/config/defconfig_arm64-thunderx-linuxapp-gcc b/config/defconfig_arm64-thunderx-linuxapp-gcc
index a52f066510..946906b67a 100644
--- a/config/defconfig_arm64-thunderx-linuxapp-gcc
+++ b/config/defconfig_arm64-thunderx-linuxapp-gcc
@@ -6,7 +6,6 @@
CONFIG_RTE_MACHINE="thunderx"
-CONFIG_RTE_CACHE_LINE_SIZE=128
CONFIG_RTE_USE_C11_MEM_MODEL=n
CONFIG_RTE_MAX_NUMA_NODES=2
CONFIG_RTE_MAX_LCORE=96
--
2.25.0
next prev parent reply other threads:[~2020-02-11 23:57 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-11 23:57 [dpdk-dev] [PATCH 0/2] cleanup makefile config and testing Thomas Monjalon
2020-02-11 23:57 ` Thomas Monjalon [this message]
2020-02-12 9:39 ` [dpdk-dev] [PATCH 1/2] config: deduplicate options David Marchand
2020-02-11 23:57 ` [dpdk-dev] [PATCH 2/2] devtools: enable more config options in build test Thomas Monjalon
2020-02-12 10:00 ` David Marchand
2020-02-12 10:31 ` [dpdk-dev] [PATCH 0/2] cleanup makefile config and testing David Marchand
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200211235724.2970097-2-thomas@monjalon.net \
--to=thomas@monjalon.net \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).