From: "Július Milan" <jmilan.dev@gmail.com>
To: dev@dpdk.org, jgrajcia@cisco.com
Subject: [dpdk-dev] [PATCH 1/2] net/memif: enable loopback
Date: Wed, 19 Feb 2020 09:18:40 +0100 [thread overview]
Message-ID: <20200219081840.GA11729@vbox> (raw)
With this patch it is possible to connect 2 DPDK memifs into loopback,
i.e. when they have the same id and different roles, as for example:
"--vdev=net_memif0,role=master,id=0"
"--vdev=net_memif1,role=slave,id=0"
Signed-off-by: Július Milan <jmilan.dev@gmail.com>
---
drivers/net/memif/memif_socket.c | 30 ++++++++++++++----------------
drivers/net/memif/rte_eth_memif.c | 1 +
drivers/net/memif/rte_eth_memif.h | 1 +
3 files changed, 16 insertions(+), 16 deletions(-)
diff --git a/drivers/net/memif/memif_socket.c b/drivers/net/memif/memif_socket.c
index ad5e30b96..553f8b004 100644
--- a/drivers/net/memif/memif_socket.c
+++ b/drivers/net/memif/memif_socket.c
@@ -203,7 +203,7 @@ memif_msg_receive_init(struct memif_control_channel *cc, memif_msg_t *msg)
dev = elt->dev;
pmd = dev->data->dev_private;
if (((pmd->flags & ETH_MEMIF_FLAG_DISABLED) == 0) &&
- pmd->id == i->id) {
+ (pmd->id == i->id) && (pmd->role == MEMIF_ROLE_MASTER)) {
/* assign control channel to device */
cc->dev = dev;
pmd->cc = cc;
@@ -528,6 +528,7 @@ memif_disconnect(struct rte_eth_dev *dev)
pmd->flags &= ~ETH_MEMIF_FLAG_CONNECTING;
pmd->flags &= ~ETH_MEMIF_FLAG_CONNECTED;
+ rte_spinlock_lock(&pmd->cc_lock);
if (pmd->cc != NULL) {
/* Clear control message queue (except disconnect message if any). */
for (elt = TAILQ_FIRST(&pmd->cc->msg_queue); elt != NULL; elt = next) {
@@ -570,6 +571,7 @@ memif_disconnect(struct rte_eth_dev *dev)
"Failed to unregister control channel callback.");
}
}
+ rte_spinlock_unlock(&pmd->cc_lock);
/* unconfig interrupts */
for (i = 0; i < pmd->cfg.num_s2m_rings; i++) {
@@ -612,7 +614,8 @@ memif_disconnect(struct rte_eth_dev *dev)
/* reset connection configuration */
memset(&pmd->run, 0, sizeof(pmd->run));
- MIF_LOG(DEBUG, "Disconnected.");
+ MIF_LOG(DEBUG, "Disconnected, id: %d, role: %s.", pmd->id,
+ (pmd->role == MEMIF_ROLE_MASTER) ? "master" : "slave");
}
static int
@@ -642,8 +645,12 @@ memif_msg_receive(struct memif_control_channel *cc)
size = recvmsg(cc->intr_handle.fd, &mh, 0);
if (size != sizeof(memif_msg_t)) {
- MIF_LOG(DEBUG, "Invalid message size.");
- memif_msg_enq_disconnect(cc, "Invalid message size", 0);
+ MIF_LOG(DEBUG, "Invalid message size = %ld", size);
+ if (size > 0)
+ /* 0 means end-of-file, negative size means error,
+ * don't send further disconnect message in such cases.
+ */
+ memif_msg_enq_disconnect(cc, "Invalid message size", 0);
return -1;
}
MIF_LOG(DEBUG, "Received msg type: %u.", msg.type);
@@ -965,20 +972,11 @@ memif_socket_init(struct rte_eth_dev *dev, const char *socket_filename)
}
pmd->socket_filename = socket->filename;
- if (socket->listener != 0 && pmd->role == MEMIF_ROLE_SLAVE) {
- MIF_LOG(ERR, "Socket is a listener.");
- return -1;
- } else if ((socket->listener == 0) && (pmd->role == MEMIF_ROLE_MASTER)) {
- MIF_LOG(ERR, "Socket is not a listener.");
- return -1;
- }
-
TAILQ_FOREACH(elt, &socket->dev_queue, next) {
tmp_pmd = elt->dev->data->dev_private;
- if (tmp_pmd->id == pmd->id) {
- MIF_LOG(ERR, "Memif device with id %d already "
- "exists on socket %s",
- pmd->id, socket->filename);
+ if (tmp_pmd->id == pmd->id && tmp_pmd->role == pmd->role) {
+ MIF_LOG(ERR, "Two interfaces with the same id (%d) can "
+ "not have the same role.", pmd->id);
return -1;
}
}
diff --git a/drivers/net/memif/rte_eth_memif.c b/drivers/net/memif/rte_eth_memif.c
index 27c0f0924..81d71c53a 100644
--- a/drivers/net/memif/rte_eth_memif.c
+++ b/drivers/net/memif/rte_eth_memif.c
@@ -1491,6 +1491,7 @@ memif_create(struct rte_vdev_device *vdev, enum memif_role_t role,
pmd->cfg.num_m2s_rings = 0;
pmd->cfg.pkt_buffer_size = pkt_buffer_size;
+ rte_spinlock_init(&pmd->cc_lock);
data = eth_dev->data;
data->dev_private = pmd;
diff --git a/drivers/net/memif/rte_eth_memif.h b/drivers/net/memif/rte_eth_memif.h
index 0d2566392..6f45b7072 100644
--- a/drivers/net/memif/rte_eth_memif.h
+++ b/drivers/net/memif/rte_eth_memif.h
@@ -94,6 +94,7 @@ struct pmd_internals {
char secret[ETH_MEMIF_SECRET_SIZE]; /**< secret (optional security parameter) */
struct memif_control_channel *cc; /**< control channel */
+ rte_spinlock_t cc_lock; /**< control channel lock */
/* remote info */
char remote_name[RTE_DEV_NAME_MAX_LEN]; /**< remote app name */
--
2.17.1
next reply other threads:[~2020-02-19 8:18 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-19 8:18 Július Milan [this message]
2020-02-19 13:07 ` Jakub Grajciar -X (jgrajcia - PANTHEON TECH SRO at Cisco)
2020-02-27 16:46 ` Ferruh Yigit
2020-03-09 12:09 ` Július Milan
2020-03-09 11:14 ` Ferruh Yigit
2020-02-27 16:59 ` Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200219081840.GA11729@vbox \
--to=jmilan.dev@gmail.com \
--cc=dev@dpdk.org \
--cc=jgrajcia@cisco.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).