From: "Wei Hu (Xavier)" <huwei013@chinasoftinc.com>
To: <dev@dpdk.org>
Subject: [dpdk-dev] [PATCH 2/2] net/bonding: fix MAC address when one port resets
Date: Tue, 25 Feb 2020 17:29:03 +0800 [thread overview]
Message-ID: <20200225092903.38455-3-huwei013@chinasoftinc.com> (raw)
In-Reply-To: <20200225092903.38455-1-huwei013@chinasoftinc.com>
From: "Wei Hu (Xavier)" <xavier.huwei@huawei.com>
Currently, based on a active-backup bond device, in the following 2 cases:
1) The primary port resets. The link status of the primary port changes
from up to down.
2) When switching the active port, one slave port resets at the same time.
one slave port changes to the primary port, but the new primary port's MAC
address probably cannot change to the bond device's MAC address. And we
can't continue receive packets whose destination MAC addresses are the same
as the bond devices's MAC address.
The current bonding PMD driver call mac_address_slaves_update function to
modify the MAC address of all slaves devices. In mac_address_slaves_update
function, the rte_eth_dev_default_mac_addr_set API function is called to
set the MAC address of the slave devices in turn in the for loop statement.
When one port reset, calling rte_eth_dev_default_mac_addr_set API fails
because the firmware will not respond to the commands from the driver,
and exit the loop, so other slave devices cannot continue to update the
MAC address.
This patch fixes the issue by avoid exiting the loop when calling
rte_eth_dev_default_mac_addr_set fails.
Fixes: 2efb58cbab6e ("bond: new link bonding library")
Cc: stable@dpdk.org
Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Chunsong Feng <fengchunsong@huawei.com>
Signed-off-by: Xuan Li <lixuan47@hisilicon.com>
---
drivers/net/bonding/rte_eth_bond_pmd.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/net/bonding/rte_eth_bond_pmd.c b/drivers/net/bonding/rte_eth_bond_pmd.c
index ddae3518c..ba3f342e7 100644
--- a/drivers/net/bonding/rte_eth_bond_pmd.c
+++ b/drivers/net/bonding/rte_eth_bond_pmd.c
@@ -1502,6 +1502,7 @@ int
mac_address_slaves_update(struct rte_eth_dev *bonded_eth_dev)
{
struct bond_dev_private *internals = bonded_eth_dev->data->dev_private;
+ bool setted;
int i;
/* Update slave devices MAC addresses */
@@ -1529,6 +1530,7 @@ mac_address_slaves_update(struct rte_eth_dev *bonded_eth_dev)
case BONDING_MODE_TLB:
case BONDING_MODE_ALB:
default:
+ setted = true;
for (i = 0; i < internals->slave_count; i++) {
if (internals->slaves[i].port_id ==
internals->current_primary_port) {
@@ -1537,7 +1539,7 @@ mac_address_slaves_update(struct rte_eth_dev *bonded_eth_dev)
bonded_eth_dev->data->mac_addrs)) {
RTE_BOND_LOG(ERR, "Failed to update port Id %d MAC address",
internals->current_primary_port);
- return -1;
+ setted = false;
}
} else {
if (rte_eth_dev_default_mac_addr_set(
@@ -1545,10 +1547,12 @@ mac_address_slaves_update(struct rte_eth_dev *bonded_eth_dev)
&internals->slaves[i].persisted_mac_addr)) {
RTE_BOND_LOG(ERR, "Failed to update port Id %d MAC address",
internals->slaves[i].port_id);
- return -1;
+ setted = false;
}
}
}
+ if (!setted)
+ return -1;
}
return 0;
--
2.23.0
next prev parent reply other threads:[~2020-02-25 9:29 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-25 9:29 [dpdk-dev] [PATCH 0/2] fixes for bonding Wei Hu (Xavier)
2020-02-25 9:29 ` [dpdk-dev] [PATCH 1/2] net/bonding: fix MAC address when switching active port Wei Hu (Xavier)
2020-02-27 17:03 ` Ferruh Yigit
2020-02-28 1:31 ` Wei Hu (Xavier)
2020-03-02 0:58 ` Wei Hu (Xavier)
2020-02-25 9:29 ` Wei Hu (Xavier) [this message]
2020-04-04 14:07 ` [dpdk-dev] [PATCH 2/2] net/bonding: fix MAC address when one port resets Chas Williams
2020-04-17 5:56 ` Wei Hu (Xavier)
2020-03-17 8:56 ` [dpdk-dev] [PATCH 0/2] fixes for bonding Wei Hu (Xavier)
2020-03-28 0:32 ` Wei Hu (Xavier)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200225092903.38455-3-huwei013@chinasoftinc.com \
--to=huwei013@chinasoftinc.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).