[dpdk-dev] [PATCH 6/7] net/dpaa: use dynamic logtype

[Stephen Hemminger <stephen@networkplumber.org>]

The static PMD logtype should not be used by drivers.
Instead, use existing log macros in this driver.

Also use standard rte_ether routine to format ether address.

Fixes: 37f9b54bd3cf ("net/dpaa: support Tx and Rx queue setup")
Cc: shreyansh.jain@nxp.com
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
 drivers/net/dpaa/dpaa_ethdev.c | 24 +++++++++---------------
 1 file changed, 9 insertions(+), 15 deletions(-)

diff --git a/drivers/net/dpaa/dpaa_ethdev.c b/drivers/net/dpaa/dpaa_ethdev.c
index fce9ce2feb9d..f59c2631a56c 100644
--- a/drivers/net/dpaa/dpaa_ethdev.c
+++ b/drivers/net/dpaa/dpaa_ethdev.c
@@ -881,8 +881,8 @@ dpaa_dev_rx_queue_count(struct rte_eth_dev *dev, uint16_t rx_queue_id)
 	PMD_INIT_FUNC_TRACE();
 
 	if (qman_query_fq_frm_cnt(rxq, &frm_cnt) == 0) {
-		RTE_LOG(DEBUG, PMD, "RX frame count for q(%d) is %u\n",
-			rx_queue_id, frm_cnt);
+		DPAA_PMD_DEBUG("RX frame count for q(%d) is %u",
+			       rx_queue_id, frm_cnt);
 	}
 	return frm_cnt;
 }
@@ -996,8 +996,7 @@ dpaa_dev_add_mac_addr(struct rte_eth_dev *dev,
 	ret = fman_if_add_mac_addr(dpaa_intf->fif, addr->addr_bytes, index);
 
 	if (ret)
-		RTE_LOG(ERR, PMD, "error: Adding the MAC ADDR failed:"
-			" err = %d", ret);
+		DPAA_PMD_ERR("Adding the MAC ADDR failed: err = %d", ret);
 	return 0;
 }
 
@@ -1023,7 +1022,7 @@ dpaa_dev_set_mac_addr(struct rte_eth_dev *dev,
 
 	ret = fman_if_add_mac_addr(dpaa_intf->fif, addr->addr_bytes, 0);
 	if (ret)
-		RTE_LOG(ERR, PMD, "error: Setting the MAC ADDR failed %d", ret);
+		DPAA_PMD_ERR("Setting the MAC ADDR failed %d", ret);
 
 	return ret;
 }
@@ -1306,6 +1305,7 @@ dpaa_dev_init(struct rte_eth_dev *eth_dev)
 	struct fman_if *fman_intf;
 	struct fman_if_bpool *bp, *tmp_bp;
 	uint32_t cgrid[DPAA_MAX_NUM_PCD_QUEUES];
+	char eth_buf[RTE_ETHER_ADDR_FMT_SIZE];
 
 	PMD_INIT_FUNC_TRACE();
 
@@ -1457,15 +1457,9 @@ dpaa_dev_init(struct rte_eth_dev *eth_dev)
 
 	/* copy the primary mac address */
 	rte_ether_addr_copy(&fman_intf->mac_addr, &eth_dev->data->mac_addrs[0]);
+	rte_ether_format_addr(eth_buf, sizeof(eth_buf), &fman_intf->mac_addr);
 
-	RTE_LOG(INFO, PMD, "net: dpaa: %s: %02x:%02x:%02x:%02x:%02x:%02x\n",
-		dpaa_device->name,
-		fman_intf->mac_addr.addr_bytes[0],
-		fman_intf->mac_addr.addr_bytes[1],
-		fman_intf->mac_addr.addr_bytes[2],
-		fman_intf->mac_addr.addr_bytes[3],
-		fman_intf->mac_addr.addr_bytes[4],
-		fman_intf->mac_addr.addr_bytes[5]);
+	DPAA_PMD_INFO("net: dpaa: %s: %s", dpaa_device->name, eth_buf);
 
 	/* Disable RX mode */
 	fman_if_discard_rx_errors(fman_intf);
@@ -1578,8 +1572,8 @@ rte_dpaa_probe(struct rte_dpaa_driver *dpaa_drv __rte_unused,
 
 	if (!is_global_init && (rte_eal_process_type() == RTE_PROC_PRIMARY)) {
 		if (access("/tmp/fmc.bin", F_OK) == -1) {
-			RTE_LOG(INFO, PMD,
-				"* FMC not configured.Enabling default mode\n");
+			DPAA_PMD_INFO(
+				"* FMC not configured.Enabling default mode");
 			default_q = 1;
 		}
 
-- 
2.20.1