From: Michal Krawczyk <mk@semihalf.com>
To: dev@dpdk.org
Cc: mw@semihalf.com, mba@semihalf.com, gtzalik@amazon.com,
evgenys@amazon.com, igorch@amazon.com,
Michal Krawczyk <mk@semihalf.com>
Subject: [dpdk-dev] [PATCH v2 07/29] net/ena/base: add accelerated LLQ mode
Date: Wed, 1 Apr 2020 16:21:05 +0200 [thread overview]
Message-ID: <20200401142127.13715-8-mk@semihalf.com> (raw)
In-Reply-To: <20200401142127.13715-1-mk@semihalf.com>
In order to use the accelerated LLQ, the driver must limit the Tx burst
and be aware that the device has the meta caching disabled. In that
situation, the meta descriptor must be valid on each Tx packet.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Guy Tzalik <gtzalik@amazon.com>
---
drivers/net/ena/base/ena_com.c | 20 +++++++-
drivers/net/ena/base/ena_com.h | 3 ++
.../net/ena/base/ena_defs/ena_admin_defs.h | 39 +++++++++++++--
drivers/net/ena/base/ena_eth_com.c | 49 +++++++++++++------
4 files changed, 91 insertions(+), 20 deletions(-)
diff --git a/drivers/net/ena/base/ena_com.c b/drivers/net/ena/base/ena_com.c
index 19815db9ad..d15b7f22dc 100644
--- a/drivers/net/ena/base/ena_com.c
+++ b/drivers/net/ena/base/ena_com.c
@@ -378,6 +378,8 @@ static int ena_com_init_io_sq(struct ena_com_dev *ena_dev,
0x0, io_sq->llq_info.desc_list_entry_size);
io_sq->llq_buf_ctrl.descs_left_in_line =
io_sq->llq_info.descs_num_before_header;
+ io_sq->disable_meta_caching =
+ io_sq->llq_info.disable_meta_caching;
if (io_sq->llq_info.max_entries_in_tx_burst > 0)
io_sq->entries_in_tx_burst_left =
@@ -595,6 +597,14 @@ static int ena_com_set_llq(struct ena_com_dev *ena_dev)
cmd.u.llq.desc_num_before_header_enabled = llq_info->descs_num_before_header;
cmd.u.llq.descriptors_stride_ctrl_enabled = llq_info->desc_stride_ctrl;
+ if (llq_info->disable_meta_caching)
+ cmd.u.llq.accel_mode.u.set.enabled_flags |=
+ BIT(ENA_ADMIN_DISABLE_META_CACHING);
+
+ if (llq_info->max_entries_in_tx_burst)
+ cmd.u.llq.accel_mode.u.set.enabled_flags |=
+ BIT(ENA_ADMIN_LIMIT_TX_BURST);
+
ret = ena_com_execute_admin_command(admin_queue,
(struct ena_admin_aq_entry *)&cmd,
sizeof(cmd),
@@ -714,9 +724,15 @@ static int ena_com_config_llq_info(struct ena_com_dev *ena_dev,
supported_feat,
llq_info->descs_num_before_header);
}
+ /* Check for accelerated queue supported */
+ llq_info->disable_meta_caching =
+ llq_features->accel_mode.u.get.supported_flags &
+ BIT(ENA_ADMIN_DISABLE_META_CACHING);
- llq_info->max_entries_in_tx_burst =
- (u16)(llq_features->max_tx_burst_size / llq_default_cfg->llq_ring_entry_size_value);
+ if (llq_features->accel_mode.u.get.supported_flags & BIT(ENA_ADMIN_LIMIT_TX_BURST))
+ llq_info->max_entries_in_tx_burst =
+ llq_features->accel_mode.u.get.max_tx_burst_size /
+ llq_default_cfg->llq_ring_entry_size_value;
rc = ena_com_set_llq(ena_dev);
if (rc)
diff --git a/drivers/net/ena/base/ena_com.h b/drivers/net/ena/base/ena_com.h
index 0e34a13fde..9f2c6ea8ee 100644
--- a/drivers/net/ena/base/ena_com.h
+++ b/drivers/net/ena/base/ena_com.h
@@ -82,6 +82,7 @@ struct ena_com_llq_info {
u16 descs_num_before_header;
u16 descs_per_entry;
u16 max_entries_in_tx_burst;
+ bool disable_meta_caching;
};
struct ena_com_io_cq {
@@ -146,6 +147,8 @@ struct ena_com_io_sq {
enum queue_direction direction;
enum ena_admin_placement_policy_type mem_queue_type;
+ bool disable_meta_caching;
+
u32 msix_vector;
struct ena_com_tx_meta cached_tx_meta;
struct ena_com_llq_info llq_info;
diff --git a/drivers/net/ena/base/ena_defs/ena_admin_defs.h b/drivers/net/ena/base/ena_defs/ena_admin_defs.h
index fb4d4d03f0..020dc78e26 100644
--- a/drivers/net/ena/base/ena_defs/ena_admin_defs.h
+++ b/drivers/net/ena/base/ena_defs/ena_admin_defs.h
@@ -469,6 +469,36 @@ enum ena_admin_llq_stride_ctrl {
ENA_ADMIN_MULTIPLE_DESCS_PER_ENTRY = 2,
};
+enum ena_admin_accel_mode_feat {
+ ENA_ADMIN_DISABLE_META_CACHING = 0,
+ ENA_ADMIN_LIMIT_TX_BURST = 1,
+};
+
+struct ena_admin_accel_mode_get {
+ /* bit field of enum ena_admin_accel_mode_feat */
+ uint16_t supported_flags;
+
+ /* maximum burst size between two doorbells. The size is in bytes */
+ uint16_t max_tx_burst_size;
+};
+
+struct ena_admin_accel_mode_set {
+ /* bit field of enum ena_admin_accel_mode_feat */
+ uint16_t enabled_flags;
+
+ uint16_t reserved;
+};
+
+struct ena_admin_accel_mode_req {
+ union {
+ uint32_t raw[2];
+
+ struct ena_admin_accel_mode_get get;
+
+ struct ena_admin_accel_mode_set set;
+ } u;
+};
+
struct ena_admin_feature_llq_desc {
uint32_t max_llq_num;
@@ -514,10 +544,13 @@ struct ena_admin_feature_llq_desc {
/* the stride control the driver selected to use */
uint16_t descriptors_stride_ctrl_enabled;
- /* Maximum size in bytes taken by llq entries in a single tx burst.
- * Set to 0 when there is no such limit.
+ /* reserved */
+ uint32_t reserved1;
+
+ /* accelerated low latency queues requirment. driver needs to
+ * support those requirments in order to use accelerated llq
*/
- uint32_t max_tx_burst_size;
+ struct ena_admin_accel_mode_req accel_mode;
};
struct ena_admin_queue_ext_feature_fields {
diff --git a/drivers/net/ena/base/ena_eth_com.c b/drivers/net/ena/base/ena_eth_com.c
index d4d44226df..aabc294fb7 100644
--- a/drivers/net/ena/base/ena_eth_com.c
+++ b/drivers/net/ena/base/ena_eth_com.c
@@ -258,11 +258,10 @@ static u16 ena_com_cdesc_rx_pkt_get(struct ena_com_io_cq *io_cq,
return count;
}
-static int ena_com_create_and_store_tx_meta_desc(struct ena_com_io_sq *io_sq,
- struct ena_com_tx_ctx *ena_tx_ctx)
+static int ena_com_create_meta(struct ena_com_io_sq *io_sq,
+ struct ena_com_tx_meta *ena_meta)
{
struct ena_eth_io_tx_meta_desc *meta_desc = NULL;
- struct ena_com_tx_meta *ena_meta = &ena_tx_ctx->ena_meta;
meta_desc = get_sq_desc(io_sq);
memset(meta_desc, 0x0, sizeof(struct ena_eth_io_tx_meta_desc));
@@ -282,12 +281,13 @@ static int ena_com_create_and_store_tx_meta_desc(struct ena_com_io_sq *io_sq,
/* Extended meta desc */
meta_desc->len_ctrl |= ENA_ETH_IO_TX_META_DESC_ETH_META_TYPE_MASK;
- meta_desc->len_ctrl |= ENA_ETH_IO_TX_META_DESC_META_STORE_MASK;
meta_desc->len_ctrl |= (io_sq->phase <<
ENA_ETH_IO_TX_META_DESC_PHASE_SHIFT) &
ENA_ETH_IO_TX_META_DESC_PHASE_MASK;
meta_desc->len_ctrl |= ENA_ETH_IO_TX_META_DESC_FIRST_MASK;
+ meta_desc->len_ctrl |= ENA_ETH_IO_TX_META_DESC_META_STORE_MASK;
+
meta_desc->word2 |= ena_meta->l3_hdr_len &
ENA_ETH_IO_TX_META_DESC_L3_HDR_LEN_MASK;
meta_desc->word2 |= (ena_meta->l3_hdr_offset <<
@@ -298,13 +298,34 @@ static int ena_com_create_and_store_tx_meta_desc(struct ena_com_io_sq *io_sq,
ENA_ETH_IO_TX_META_DESC_L4_HDR_LEN_IN_WORDS_SHIFT) &
ENA_ETH_IO_TX_META_DESC_L4_HDR_LEN_IN_WORDS_MASK;
- meta_desc->len_ctrl |= ENA_ETH_IO_TX_META_DESC_META_STORE_MASK;
+ return ena_com_sq_update_tail(io_sq);
+}
- /* Cached the meta desc */
- memcpy(&io_sq->cached_tx_meta, ena_meta,
- sizeof(struct ena_com_tx_meta));
+static int ena_com_create_and_store_tx_meta_desc(struct ena_com_io_sq *io_sq,
+ struct ena_com_tx_ctx *ena_tx_ctx,
+ bool *have_meta)
+{
+ struct ena_com_tx_meta *ena_meta = &ena_tx_ctx->ena_meta;
- return ena_com_sq_update_tail(io_sq);
+ /* When disable meta caching is set, don't bother to save the meta and
+ * compare it to the stored version, just create the meta
+ */
+ if (io_sq->disable_meta_caching) {
+ if (unlikely(!ena_tx_ctx->meta_valid))
+ return ENA_COM_INVAL;
+
+ *have_meta = true;
+ return ena_com_create_meta(io_sq, ena_meta);
+ } else if (ena_com_meta_desc_changed(io_sq, ena_tx_ctx)) {
+ *have_meta = true;
+ /* Cache the meta desc */
+ memcpy(&io_sq->cached_tx_meta, ena_meta,
+ sizeof(struct ena_com_tx_meta));
+ return ena_com_create_meta(io_sq, ena_meta);
+ } else {
+ *have_meta = false;
+ return ENA_COM_OK;
+ }
}
static void ena_com_rx_set_flags(struct ena_com_rx_ctx *ena_rx_ctx,
@@ -380,12 +401,10 @@ int ena_com_prepare_tx(struct ena_com_io_sq *io_sq,
if (unlikely(rc))
return rc;
- have_meta = ena_tx_ctx->meta_valid && ena_com_meta_desc_changed(io_sq,
- ena_tx_ctx);
- if (have_meta) {
- rc = ena_com_create_and_store_tx_meta_desc(io_sq, ena_tx_ctx);
- if (unlikely(rc))
- return rc;
+ rc = ena_com_create_and_store_tx_meta_desc(io_sq, ena_tx_ctx, &have_meta);
+ if (unlikely(rc)) {
+ ena_trc_err("failed to create and store tx meta desc\n");
+ return rc;
}
/* If the caller doesn't want to send packets */
--
2.20.1
next prev parent reply other threads:[~2020-04-01 14:22 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-01 14:20 [dpdk-dev] [PATCH v2 00/29] Update ENA driver to v2.1.0 Michal Krawczyk
2020-04-01 14:20 ` [dpdk-dev] [PATCH v2 01/29] net/ena: check if size of buffer is at least 1400B Michal Krawczyk
2020-04-01 14:21 ` [dpdk-dev] [PATCH v2 02/29] net/ena/base: make allocation macros thread-safe Michal Krawczyk
2020-04-01 14:21 ` [dpdk-dev] [PATCH v2 03/29] net/ena/base: prevent allocation of 0-sized memory Michal Krawczyk
2020-04-01 14:21 ` [dpdk-dev] [PATCH v2 04/29] net/ena/base: set default hash key Michal Krawczyk
2020-04-02 12:36 ` Ferruh Yigit
2020-04-03 11:10 ` Michał Krawczyk
2020-04-01 14:21 ` [dpdk-dev] [PATCH v2 05/29] net/ena/base: rework interrupt moderation Michal Krawczyk
2020-04-01 14:21 ` [dpdk-dev] [PATCH v2 06/29] net/ena/base: remove extra properties strings Michal Krawczyk
2020-04-01 14:21 ` Michal Krawczyk [this message]
2020-04-02 12:41 ` [dpdk-dev] [PATCH v2 07/29] net/ena/base: add accelerated LLQ mode Ferruh Yigit
2020-04-03 11:15 ` Michał Krawczyk
2020-04-01 14:21 ` [dpdk-dev] [PATCH v2 08/29] net/ena/base: fix documentation of the functions Michal Krawczyk
2020-04-01 14:21 ` [dpdk-dev] [PATCH v2 09/29] net/ena/base: fix indentation in cq polling Michal Krawczyk
2020-04-01 14:21 ` [dpdk-dev] [PATCH v2 10/29] net/ena/base: add error logs when preparing Tx Michal Krawczyk
2020-04-02 12:53 ` Ferruh Yigit
2020-04-03 11:31 ` Michał Krawczyk
2020-04-01 14:21 ` [dpdk-dev] [PATCH v2 11/29] net/ena/base: use 48-bit memory addresses in ena_com Michal Krawczyk
2020-04-02 12:55 ` Ferruh Yigit
2020-04-03 12:14 ` Michał Krawczyk
2020-04-01 14:21 ` [dpdk-dev] [PATCH v2 12/29] net/ena/base: fix types for printing timestamps Michal Krawczyk
2020-04-01 14:21 ` [dpdk-dev] [PATCH v2 13/29] net/ena/base: fix indentation of multiple defines Michal Krawczyk
2020-04-01 14:21 ` [dpdk-dev] [PATCH v2 14/29] net/ena/base: update gen date and commit Michal Krawczyk
2020-04-01 14:21 ` [dpdk-dev] [PATCH v2 15/29] net/ena: set IO ring size to the valid value Michal Krawczyk
2020-04-01 14:21 ` [dpdk-dev] [PATCH v2 16/29] net/ena: refactor getting IO queues capabilities Michal Krawczyk
2020-04-01 14:21 ` [dpdk-dev] [PATCH v2 17/29] net/ena: add support for large LLQ headers Michal Krawczyk
2020-04-02 13:02 ` Ferruh Yigit
2020-04-03 12:15 ` Michał Krawczyk
2020-04-01 14:21 ` [dpdk-dev] [PATCH v2 18/29] net/ena: remove memory barriers before doorbells Michal Krawczyk
2020-04-01 14:21 ` [dpdk-dev] [PATCH v2 19/29] net/ena: add Tx drops statistic Michal Krawczyk
2020-04-02 13:05 ` Ferruh Yigit
2020-04-03 12:30 ` Michał Krawczyk
2020-04-01 14:21 ` [dpdk-dev] [PATCH v2 20/29] net/ena: disable meta caching Michal Krawczyk
2020-04-01 14:21 ` [dpdk-dev] [PATCH v2 21/29] net/ena: refactor Rx path Michal Krawczyk
2020-04-01 14:21 ` [dpdk-dev] [PATCH v2 22/29] net/ena: rework getting number of available descs Michal Krawczyk
2020-04-01 14:21 ` [dpdk-dev] [PATCH v2 23/29] net/ena: limit refill threshold by fixed value Michal Krawczyk
2020-04-01 14:21 ` [dpdk-dev] [PATCH v2 24/29] net/ena: use macros for ring idx operations Michal Krawczyk
2020-04-01 14:21 ` [dpdk-dev] [PATCH v2 25/29] net/ena: refactor Tx path Michal Krawczyk
2020-04-01 14:21 ` [dpdk-dev] [PATCH v2 26/29] net/ena: reuse 0 length Rx descriptor Michal Krawczyk
2020-04-01 14:21 ` [dpdk-dev] [PATCH v2 27/29] doc: add notes on ENA usage on metal instances Michal Krawczyk
2020-04-01 14:21 ` [dpdk-dev] [PATCH v2 28/29] net/ena: update copyright date Michal Krawczyk
2020-04-02 15:51 ` Ferruh Yigit
2020-04-03 12:31 ` Michał Krawczyk
2020-04-01 14:21 ` [dpdk-dev] [PATCH v2 29/29] net/ena: update version of the driver to v2.1.0 Michal Krawczyk
2020-04-02 15:53 ` Ferruh Yigit
2020-04-03 12:32 ` Michał Krawczyk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200401142127.13715-8-mk@semihalf.com \
--to=mk@semihalf.com \
--cc=dev@dpdk.org \
--cc=evgenys@amazon.com \
--cc=gtzalik@amazon.com \
--cc=igorch@amazon.com \
--cc=mba@semihalf.com \
--cc=mw@semihalf.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).