From: Nithin Dabilpuram <nithind1988@gmail.com>
To: Jerin Jacob <jerinj@marvell.com>,
Nithin Dabilpuram <ndabilpuram@marvell.com>,
Kiran Kumar K <kirankumark@marvell.com>
Cc: dev@dpdk.org, kkanas@marvell.com
Subject: [dpdk-dev] [PATCH v2 02/11] net/octeontx2: restructure tm helper functions
Date: Fri, 3 Apr 2020 01:04:44 +0530 [thread overview]
Message-ID: <20200402193453.17266-3-nithind1988@gmail.com> (raw)
In-Reply-To: <20200402193453.17266-1-nithind1988@gmail.com>
From: Nithin Dabilpuram <ndabilpuram@marvell.com>
Restructure traffic manager helper function by splitting to
multiple sets of register configurations like shaping, scheduling
and topology config.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Krzysztof Kanas <kkanas@marvell.com>
---
drivers/net/octeontx2/otx2_tm.c | 689 ++++++++++++++++++++++------------------
drivers/net/octeontx2/otx2_tm.h | 85 ++---
2 files changed, 417 insertions(+), 357 deletions(-)
diff --git a/drivers/net/octeontx2/otx2_tm.c b/drivers/net/octeontx2/otx2_tm.c
index 2364e03..057297a 100644
--- a/drivers/net/octeontx2/otx2_tm.c
+++ b/drivers/net/octeontx2/otx2_tm.c
@@ -94,52 +94,50 @@ nix_tm_shaper_profile_search(struct otx2_eth_dev *dev, uint32_t shaper_id)
}
static inline uint64_t
-shaper_rate_to_nix(uint64_t cclk_hz, uint64_t cclk_ticks,
- uint64_t value, uint64_t *exponent_p,
+shaper_rate_to_nix(uint64_t value, uint64_t *exponent_p,
uint64_t *mantissa_p, uint64_t *div_exp_p)
{
uint64_t div_exp, exponent, mantissa;
/* Boundary checks */
- if (value < MIN_SHAPER_RATE(cclk_hz, cclk_ticks) ||
- value > MAX_SHAPER_RATE(cclk_hz, cclk_ticks))
+ if (value < MIN_SHAPER_RATE ||
+ value > MAX_SHAPER_RATE)
return 0;
- if (value <= SHAPER_RATE(cclk_hz, cclk_ticks, 0, 0, 0)) {
+ if (value <= SHAPER_RATE(0, 0, 0)) {
/* Calculate rate div_exp and mantissa using
* the following formula:
*
- * value = (cclk_hz * (256 + mantissa)
- * / ((cclk_ticks << div_exp) * 256)
+ * value = (2E6 * (256 + mantissa)
+ * / ((1 << div_exp) * 256))
*/
div_exp = 0;
exponent = 0;
mantissa = MAX_RATE_MANTISSA;
- while (value < (cclk_hz / (cclk_ticks << div_exp)))
+ while (value < (NIX_SHAPER_RATE_CONST / (1 << div_exp)))
div_exp += 1;
while (value <
- ((cclk_hz * (256 + mantissa)) /
- ((cclk_ticks << div_exp) * 256)))
+ ((NIX_SHAPER_RATE_CONST * (256 + mantissa)) /
+ ((1 << div_exp) * 256)))
mantissa -= 1;
} else {
/* Calculate rate exponent and mantissa using
* the following formula:
*
- * value = (cclk_hz * ((256 + mantissa) << exponent)
- * / (cclk_ticks * 256)
+ * value = (2E6 * ((256 + mantissa) << exponent)) / 256
*
*/
div_exp = 0;
exponent = MAX_RATE_EXPONENT;
mantissa = MAX_RATE_MANTISSA;
- while (value < (cclk_hz * (1 << exponent)) / cclk_ticks)
+ while (value < (NIX_SHAPER_RATE_CONST * (1 << exponent)))
exponent -= 1;
- while (value < (cclk_hz * ((256 + mantissa) << exponent)) /
- (cclk_ticks * 256))
+ while (value < ((NIX_SHAPER_RATE_CONST *
+ ((256 + mantissa) << exponent)) / 256))
mantissa -= 1;
}
@@ -155,20 +153,7 @@ shaper_rate_to_nix(uint64_t cclk_hz, uint64_t cclk_ticks,
*mantissa_p = mantissa;
/* Calculate real rate value */
- return SHAPER_RATE(cclk_hz, cclk_ticks, exponent, mantissa, div_exp);
-}
-
-static inline uint64_t
-lx_shaper_rate_to_nix(uint64_t cclk_hz, uint32_t hw_lvl,
- uint64_t value, uint64_t *exponent,
- uint64_t *mantissa, uint64_t *div_exp)
-{
- if (hw_lvl == NIX_TXSCH_LVL_TL1)
- return shaper_rate_to_nix(cclk_hz, L1_TIME_WHEEL_CCLK_TICKS,
- value, exponent, mantissa, div_exp);
- else
- return shaper_rate_to_nix(cclk_hz, LX_TIME_WHEEL_CCLK_TICKS,
- value, exponent, mantissa, div_exp);
+ return SHAPER_RATE(exponent, mantissa, div_exp);
}
static inline uint64_t
@@ -207,329 +192,394 @@ shaper_burst_to_nix(uint64_t value, uint64_t *exponent_p,
return SHAPER_BURST(exponent, mantissa);
}
-static int
-configure_shaper_cir_pir_reg(struct otx2_eth_dev *dev,
- struct otx2_nix_tm_node *tm_node,
- struct shaper_params *cir,
- struct shaper_params *pir)
-{
- uint32_t shaper_profile_id = RTE_TM_SHAPER_PROFILE_ID_NONE;
- struct otx2_nix_tm_shaper_profile *shaper_profile = NULL;
- struct rte_tm_shaper_params *param;
-
- shaper_profile_id = tm_node->params.shaper_profile_id;
-
- shaper_profile = nix_tm_shaper_profile_search(dev, shaper_profile_id);
- if (shaper_profile) {
- param = &shaper_profile->profile;
- /* Calculate CIR exponent and mantissa */
- if (param->committed.rate)
- cir->rate = lx_shaper_rate_to_nix(CCLK_HZ,
- tm_node->hw_lvl_id,
- param->committed.rate,
- &cir->exponent,
- &cir->mantissa,
- &cir->div_exp);
-
- /* Calculate PIR exponent and mantissa */
- if (param->peak.rate)
- pir->rate = lx_shaper_rate_to_nix(CCLK_HZ,
- tm_node->hw_lvl_id,
- param->peak.rate,
- &pir->exponent,
- &pir->mantissa,
- &pir->div_exp);
-
- /* Calculate CIR burst exponent and mantissa */
- if (param->committed.size)
- cir->burst = shaper_burst_to_nix(param->committed.size,
- &cir->burst_exponent,
- &cir->burst_mantissa);
-
- /* Calculate PIR burst exponent and mantissa */
- if (param->peak.size)
- pir->burst = shaper_burst_to_nix(param->peak.size,
- &pir->burst_exponent,
- &pir->burst_mantissa);
- }
-
- return 0;
-}
-
-static int
-send_tm_reqval(struct otx2_mbox *mbox, struct nix_txschq_config *req)
+static void
+shaper_config_to_nix(struct otx2_nix_tm_shaper_profile *profile,
+ struct shaper_params *cir,
+ struct shaper_params *pir)
{
- int rc;
-
- if (req->num_regs > MAX_REGS_PER_MBOX_MSG)
- return -ERANGE;
-
- rc = otx2_mbox_process(mbox);
- if (rc)
- return rc;
-
- req->num_regs = 0;
- return 0;
+ struct rte_tm_shaper_params *param = &profile->params;
+
+ if (!profile)
+ return;
+
+ /* Calculate CIR exponent and mantissa */
+ if (param->committed.rate)
+ cir->rate = shaper_rate_to_nix(param->committed.rate,
+ &cir->exponent,
+ &cir->mantissa,
+ &cir->div_exp);
+
+ /* Calculate PIR exponent and mantissa */
+ if (param->peak.rate)
+ pir->rate = shaper_rate_to_nix(param->peak.rate,
+ &pir->exponent,
+ &pir->mantissa,
+ &pir->div_exp);
+
+ /* Calculate CIR burst exponent and mantissa */
+ if (param->committed.size)
+ cir->burst = shaper_burst_to_nix(param->committed.size,
+ &cir->burst_exponent,
+ &cir->burst_mantissa);
+
+ /* Calculate PIR burst exponent and mantissa */
+ if (param->peak.size)
+ pir->burst = shaper_burst_to_nix(param->peak.size,
+ &pir->burst_exponent,
+ &pir->burst_mantissa);
}
static int
-populate_tm_registers(struct otx2_eth_dev *dev,
- struct otx2_nix_tm_node *tm_node)
+populate_tm_tl1_default(struct otx2_eth_dev *dev, uint32_t schq)
{
- uint64_t strict_schedul_prio, rr_prio;
struct otx2_mbox *mbox = dev->mbox;
- volatile uint64_t *reg, *regval;
- uint64_t parent = 0, child = 0;
- struct shaper_params cir, pir;
struct nix_txschq_config *req;
+
+ /*
+ * Default config for TL1.
+ * For VF this is always ignored.
+ */
+
+ req = otx2_mbox_alloc_msg_nix_txschq_cfg(mbox);
+ req->lvl = NIX_TXSCH_LVL_TL1;
+
+ /* Set DWRR quantum */
+ req->reg[0] = NIX_AF_TL1X_SCHEDULE(schq);
+ req->regval[0] = TXSCH_TL1_DFLT_RR_QTM;
+ req->num_regs++;
+
+ req->reg[1] = NIX_AF_TL1X_TOPOLOGY(schq);
+ req->regval[1] = (TXSCH_TL1_DFLT_RR_PRIO << 1);
+ req->num_regs++;
+
+ req->reg[2] = NIX_AF_TL1X_CIR(schq);
+ req->regval[2] = 0;
+ req->num_regs++;
+
+ return otx2_mbox_process(mbox);
+}
+
+static uint8_t
+prepare_tm_sched_reg(struct otx2_eth_dev *dev,
+ struct otx2_nix_tm_node *tm_node,
+ volatile uint64_t *reg, volatile uint64_t *regval)
+{
+ uint64_t strict_prio = tm_node->priority;
+ uint32_t hw_lvl = tm_node->hw_lvl;
+ uint32_t schq = tm_node->hw_id;
uint64_t rr_quantum;
- uint32_t hw_lvl;
- uint32_t schq;
- int rc;
+ uint8_t k = 0;
+
+ rr_quantum = NIX_TM_WEIGHT_TO_RR_QUANTUM(tm_node->weight);
+
+ /* For children to root, strict prio is default if either
+ * device root is TL2 or TL1 Static Priority is disabled.
+ */
+ if (hw_lvl == NIX_TXSCH_LVL_TL2 &&
+ (dev->otx2_tm_root_lvl == NIX_TXSCH_LVL_TL2 ||
+ dev->tm_flags & NIX_TM_TL1_NO_SP))
+ strict_prio = TXSCH_TL1_DFLT_RR_PRIO;
+
+ otx2_tm_dbg("Schedule config node %s(%u) lvl %u id %u, "
+ "prio 0x%" PRIx64 ", rr_quantum 0x%" PRIx64 " (%p)",
+ nix_hwlvl2str(tm_node->hw_lvl), schq, tm_node->lvl,
+ tm_node->id, strict_prio, rr_quantum, tm_node);
+
+ switch (hw_lvl) {
+ case NIX_TXSCH_LVL_SMQ:
+ reg[k] = NIX_AF_MDQX_SCHEDULE(schq);
+ regval[k] = (strict_prio << 24) | rr_quantum;
+ k++;
+
+ break;
+ case NIX_TXSCH_LVL_TL4:
+ reg[k] = NIX_AF_TL4X_SCHEDULE(schq);
+ regval[k] = (strict_prio << 24) | rr_quantum;
+ k++;
+
+ break;
+ case NIX_TXSCH_LVL_TL3:
+ reg[k] = NIX_AF_TL3X_SCHEDULE(schq);
+ regval[k] = (strict_prio << 24) | rr_quantum;
+ k++;
+
+ break;
+ case NIX_TXSCH_LVL_TL2:
+ reg[k] = NIX_AF_TL2X_SCHEDULE(schq);
+ regval[k] = (strict_prio << 24) | rr_quantum;
+ k++;
+
+ break;
+ case NIX_TXSCH_LVL_TL1:
+ reg[k] = NIX_AF_TL1X_SCHEDULE(schq);
+ regval[k] = rr_quantum;
+ k++;
+
+ break;
+ }
+
+ return k;
+}
+
+static uint8_t
+prepare_tm_shaper_reg(struct otx2_nix_tm_node *tm_node,
+ struct otx2_nix_tm_shaper_profile *profile,
+ volatile uint64_t *reg, volatile uint64_t *regval)
+{
+ struct shaper_params cir, pir;
+ uint32_t schq = tm_node->hw_id;
+ uint8_t k = 0;
memset(&cir, 0, sizeof(cir));
memset(&pir, 0, sizeof(pir));
+ shaper_config_to_nix(profile, &cir, &pir);
- /* Skip leaf nodes */
- if (tm_node->hw_lvl_id == NIX_TXSCH_LVL_CNT)
- return 0;
+ otx2_tm_dbg("Shaper config node %s(%u) lvl %u id %u, "
+ "pir %" PRIu64 "(%" PRIu64 "B),"
+ " cir %" PRIu64 "(%" PRIu64 "B) (%p)",
+ nix_hwlvl2str(tm_node->hw_lvl), schq, tm_node->lvl,
+ tm_node->id, pir.rate, pir.burst,
+ cir.rate, cir.burst, tm_node);
+
+ switch (tm_node->hw_lvl) {
+ case NIX_TXSCH_LVL_SMQ:
+ /* Configure PIR, CIR */
+ reg[k] = NIX_AF_MDQX_PIR(schq);
+ regval[k] = (pir.rate && pir.burst) ?
+ (shaper2regval(&pir) | 1) : 0;
+ k++;
+
+ reg[k] = NIX_AF_MDQX_CIR(schq);
+ regval[k] = (cir.rate && cir.burst) ?
+ (shaper2regval(&cir) | 1) : 0;
+ k++;
+
+ /* Configure RED ALG */
+ reg[k] = NIX_AF_MDQX_SHAPE(schq);
+ regval[k] = ((uint64_t)tm_node->red_algo << 9);
+ k++;
+ break;
+ case NIX_TXSCH_LVL_TL4:
+ /* Configure PIR, CIR */
+ reg[k] = NIX_AF_TL4X_PIR(schq);
+ regval[k] = (pir.rate && pir.burst) ?
+ (shaper2regval(&pir) | 1) : 0;
+ k++;
+
+ reg[k] = NIX_AF_TL4X_CIR(schq);
+ regval[k] = (cir.rate && cir.burst) ?
+ (shaper2regval(&cir) | 1) : 0;
+ k++;
+
+ /* Configure RED algo */
+ reg[k] = NIX_AF_TL4X_SHAPE(schq);
+ regval[k] = ((uint64_t)tm_node->red_algo << 9);
+ k++;
+ break;
+ case NIX_TXSCH_LVL_TL3:
+ /* Configure PIR, CIR */
+ reg[k] = NIX_AF_TL3X_PIR(schq);
+ regval[k] = (pir.rate && pir.burst) ?
+ (shaper2regval(&pir) | 1) : 0;
+ k++;
+
+ reg[k] = NIX_AF_TL3X_CIR(schq);
+ regval[k] = (cir.rate && cir.burst) ?
+ (shaper2regval(&cir) | 1) : 0;
+ k++;
+
+ /* Configure RED algo */
+ reg[k] = NIX_AF_TL3X_SHAPE(schq);
+ regval[k] = ((uint64_t)tm_node->red_algo << 9);
+ k++;
+
+ break;
+ case NIX_TXSCH_LVL_TL2:
+ /* Configure PIR, CIR */
+ reg[k] = NIX_AF_TL2X_PIR(schq);
+ regval[k] = (pir.rate && pir.burst) ?
+ (shaper2regval(&pir) | 1) : 0;
+ k++;
+
+ reg[k] = NIX_AF_TL2X_CIR(schq);
+ regval[k] = (cir.rate && cir.burst) ?
+ (shaper2regval(&cir) | 1) : 0;
+ k++;
+
+ /* Configure RED algo */
+ reg[k] = NIX_AF_TL2X_SHAPE(schq);
+ regval[k] = ((uint64_t)tm_node->red_algo << 9);
+ k++;
+
+ break;
+ case NIX_TXSCH_LVL_TL1:
+ /* Configure CIR */
+ reg[k] = NIX_AF_TL1X_CIR(schq);
+ regval[k] = (cir.rate && cir.burst) ?
+ (shaper2regval(&cir) | 1) : 0;
+ k++;
+ break;
+ }
+
+ return k;
+}
+
+static int
+populate_tm_reg(struct otx2_eth_dev *dev,
+ struct otx2_nix_tm_node *tm_node)
+{
+ struct otx2_nix_tm_shaper_profile *profile;
+ uint64_t regval_mask[MAX_REGS_PER_MBOX_MSG];
+ uint64_t regval[MAX_REGS_PER_MBOX_MSG];
+ uint64_t reg[MAX_REGS_PER_MBOX_MSG];
+ struct otx2_mbox *mbox = dev->mbox;
+ uint64_t parent = 0, child = 0;
+ uint32_t hw_lvl, rr_prio, schq;
+ struct nix_txschq_config *req;
+ int rc = -EFAULT;
+ uint8_t k = 0;
+
+ memset(regval_mask, 0, sizeof(regval_mask));
+ profile = nix_tm_shaper_profile_search(dev,
+ tm_node->params.shaper_profile_id);
+ rr_prio = tm_node->rr_prio;
+ hw_lvl = tm_node->hw_lvl;
+ schq = tm_node->hw_id;
/* Root node will not have a parent node */
- if (tm_node->hw_lvl_id == dev->otx2_tm_root_lvl)
+ if (hw_lvl == dev->otx2_tm_root_lvl)
parent = tm_node->parent_hw_id;
else
parent = tm_node->parent->hw_id;
/* Do we need this trigger to configure TL1 */
if (dev->otx2_tm_root_lvl == NIX_TXSCH_LVL_TL2 &&
- tm_node->hw_lvl_id == dev->otx2_tm_root_lvl) {
- schq = parent;
- /*
- * Default config for TL1.
- * For VF this is always ignored.
- */
-
- req = otx2_mbox_alloc_msg_nix_txschq_cfg(mbox);
- req->lvl = NIX_TXSCH_LVL_TL1;
-
- /* Set DWRR quantum */
- req->reg[0] = NIX_AF_TL1X_SCHEDULE(schq);
- req->regval[0] = TXSCH_TL1_DFLT_RR_QTM;
- req->num_regs++;
-
- req->reg[1] = NIX_AF_TL1X_TOPOLOGY(schq);
- req->regval[1] = (TXSCH_TL1_DFLT_RR_PRIO << 1);
- req->num_regs++;
-
- req->reg[2] = NIX_AF_TL1X_CIR(schq);
- req->regval[2] = 0;
- req->num_regs++;
-
- rc = send_tm_reqval(mbox, req);
+ hw_lvl == dev->otx2_tm_root_lvl) {
+ rc = populate_tm_tl1_default(dev, parent);
if (rc)
goto error;
}
- if (tm_node->hw_lvl_id != NIX_TXSCH_LVL_SMQ)
+ if (hw_lvl != NIX_TXSCH_LVL_SMQ)
child = find_prio_anchor(dev, tm_node->id);
- rr_prio = tm_node->rr_prio;
- hw_lvl = tm_node->hw_lvl_id;
- strict_schedul_prio = tm_node->priority;
- schq = tm_node->hw_id;
- rr_quantum = (tm_node->weight * NIX_TM_RR_QUANTUM_MAX) /
- MAX_SCHED_WEIGHT;
-
- configure_shaper_cir_pir_reg(dev, tm_node, &cir, &pir);
-
- otx2_tm_dbg("Configure node %p, lvl %u hw_lvl %u, id %u, hw_id %u,"
- "parent_hw_id %" PRIx64 ", pir %" PRIx64 ", cir %" PRIx64,
- tm_node, tm_node->level_id, hw_lvl,
- tm_node->id, schq, parent, pir.rate, cir.rate);
-
- rc = -EFAULT;
-
+ /* Override default rr_prio when TL1
+ * Static Priority is disabled
+ */
+ if (hw_lvl == NIX_TXSCH_LVL_TL1 &&
+ dev->tm_flags & NIX_TM_TL1_NO_SP) {
+ rr_prio = TXSCH_TL1_DFLT_RR_PRIO;
+ child = 0;
+ }
+
+ otx2_tm_dbg("Topology config node %s(%u)->%s(%lu) lvl %u, id %u"
+ " prio_anchor %lu rr_prio %u (%p)", nix_hwlvl2str(hw_lvl),
+ schq, nix_hwlvl2str(hw_lvl + 1), parent, tm_node->lvl,
+ tm_node->id, child, rr_prio, tm_node);
+
+ /* Prepare Topology and Link config */
switch (hw_lvl) {
case NIX_TXSCH_LVL_SMQ:
- req = otx2_mbox_alloc_msg_nix_txschq_cfg(mbox);
- req->lvl = hw_lvl;
- reg = req->reg;
- regval = req->regval;
- req->num_regs = 0;
/* Set xoff which will be cleared later */
- *reg++ = NIX_AF_SMQX_CFG(schq);
- *regval++ = BIT_ULL(50) | ((uint64_t)NIX_MAX_VTAG_INS << 36) |
- (NIX_MAX_HW_FRS << 8) | NIX_MIN_HW_FRS;
- req->num_regs++;
- *reg++ = NIX_AF_MDQX_PARENT(schq);
- *regval++ = parent << 16;
- req->num_regs++;
- *reg++ = NIX_AF_MDQX_SCHEDULE(schq);
- *regval++ = (strict_schedul_prio << 24) | rr_quantum;
- req->num_regs++;
- if (pir.rate && pir.burst) {
- *reg++ = NIX_AF_MDQX_PIR(schq);
- *regval++ = shaper2regval(&pir) | 1;
- req->num_regs++;
- }
+ reg[k] = NIX_AF_SMQX_CFG(schq);
+ regval[k] = BIT_ULL(50);
+ regval_mask[k] = ~BIT_ULL(50);
+ k++;
- if (cir.rate && cir.burst) {
- *reg++ = NIX_AF_MDQX_CIR(schq);
- *regval++ = shaper2regval(&cir) | 1;
- req->num_regs++;
- }
+ /* Parent and schedule conf */
+ reg[k] = NIX_AF_MDQX_PARENT(schq);
+ regval[k] = parent << 16;
+ k++;
- rc = send_tm_reqval(mbox, req);
- if (rc)
- goto error;
break;
case NIX_TXSCH_LVL_TL4:
- req = otx2_mbox_alloc_msg_nix_txschq_cfg(mbox);
- req->lvl = hw_lvl;
- req->num_regs = 0;
- reg = req->reg;
- regval = req->regval;
+ /* Parent and schedule conf */
+ reg[k] = NIX_AF_TL4X_PARENT(schq);
+ regval[k] = parent << 16;
+ k++;
+
+ reg[k] = NIX_AF_TL4X_TOPOLOGY(schq);
+ regval[k] = (child << 32) | (rr_prio << 1);
+ k++;
- *reg++ = NIX_AF_TL4X_PARENT(schq);
- *regval++ = parent << 16;
- req->num_regs++;
- *reg++ = NIX_AF_TL4X_TOPOLOGY(schq);
- *regval++ = (child << 32) | (rr_prio << 1);
- req->num_regs++;
- *reg++ = NIX_AF_TL4X_SCHEDULE(schq);
- *regval++ = (strict_schedul_prio << 24) | rr_quantum;
- req->num_regs++;
- if (pir.rate && pir.burst) {
- *reg++ = NIX_AF_TL4X_PIR(schq);
- *regval++ = shaper2regval(&pir) | 1;
- req->num_regs++;
- }
- if (cir.rate && cir.burst) {
- *reg++ = NIX_AF_TL4X_CIR(schq);
- *regval++ = shaper2regval(&cir) | 1;
- req->num_regs++;
- }
/* Configure TL4 to send to SDP channel instead of CGX/LBK */
if (otx2_dev_is_sdp(dev)) {
- *reg++ = NIX_AF_TL4X_SDP_LINK_CFG(schq);
- *regval++ = BIT_ULL(12);
- req->num_regs++;
+ reg[k] = NIX_AF_TL4X_SDP_LINK_CFG(schq);
+ regval[k] = BIT_ULL(12);
+ k++;
}
-
- rc = send_tm_reqval(mbox, req);
- if (rc)
- goto error;
break;
case NIX_TXSCH_LVL_TL3:
- req = otx2_mbox_alloc_msg_nix_txschq_cfg(mbox);
- req->lvl = hw_lvl;
- req->num_regs = 0;
- reg = req->reg;
- regval = req->regval;
+ /* Parent and schedule conf */
+ reg[k] = NIX_AF_TL3X_PARENT(schq);
+ regval[k] = parent << 16;
+ k++;
- *reg++ = NIX_AF_TL3X_PARENT(schq);
- *regval++ = parent << 16;
- req->num_regs++;
- *reg++ = NIX_AF_TL3X_TOPOLOGY(schq);
- *regval++ = (child << 32) | (rr_prio << 1);
- req->num_regs++;
- *reg++ = NIX_AF_TL3X_SCHEDULE(schq);
- *regval++ = (strict_schedul_prio << 24) | rr_quantum;
- req->num_regs++;
+ reg[k] = NIX_AF_TL3X_TOPOLOGY(schq);
+ regval[k] = (child << 32) | (rr_prio << 1);
+ k++;
/* Link configuration */
if (!otx2_dev_is_sdp(dev) &&
dev->link_cfg_lvl == NIX_TXSCH_LVL_TL3) {
- *reg++ = NIX_AF_TL3_TL2X_LINKX_CFG(schq,
+ reg[k] = NIX_AF_TL3_TL2X_LINKX_CFG(schq,
nix_get_link(dev));
- *regval++ = BIT_ULL(12) | nix_get_relchan(dev);
- req->num_regs++;
+ regval[k] = BIT_ULL(12) | nix_get_relchan(dev);
+ k++;
}
- if (pir.rate && pir.burst) {
- *reg++ = NIX_AF_TL3X_PIR(schq);
- *regval++ = shaper2regval(&pir) | 1;
- req->num_regs++;
- }
- if (cir.rate && cir.burst) {
- *reg++ = NIX_AF_TL3X_CIR(schq);
- *regval++ = shaper2regval(&cir) | 1;
- req->num_regs++;
- }
-
- rc = send_tm_reqval(mbox, req);
- if (rc)
- goto error;
break;
case NIX_TXSCH_LVL_TL2:
- req = otx2_mbox_alloc_msg_nix_txschq_cfg(mbox);
- req->lvl = hw_lvl;
- req->num_regs = 0;
- reg = req->reg;
- regval = req->regval;
+ /* Parent and schedule conf */
+ reg[k] = NIX_AF_TL2X_PARENT(schq);
+ regval[k] = parent << 16;
+ k++;
- *reg++ = NIX_AF_TL2X_PARENT(schq);
- *regval++ = parent << 16;
- req->num_regs++;
- *reg++ = NIX_AF_TL2X_TOPOLOGY(schq);
- *regval++ = (child << 32) | (rr_prio << 1);
- req->num_regs++;
- *reg++ = NIX_AF_TL2X_SCHEDULE(schq);
- if (dev->otx2_tm_root_lvl == NIX_TXSCH_LVL_TL2)
- *regval++ = (1 << 24) | rr_quantum;
- else
- *regval++ = (strict_schedul_prio << 24) | rr_quantum;
- req->num_regs++;
+ reg[k] = NIX_AF_TL2X_TOPOLOGY(schq);
+ regval[k] = (child << 32) | (rr_prio << 1);
+ k++;
/* Link configuration */
if (!otx2_dev_is_sdp(dev) &&
dev->link_cfg_lvl == NIX_TXSCH_LVL_TL2) {
- *reg++ = NIX_AF_TL3_TL2X_LINKX_CFG(schq,
+ reg[k] = NIX_AF_TL3_TL2X_LINKX_CFG(schq,
nix_get_link(dev));
- *regval++ = BIT_ULL(12) | nix_get_relchan(dev);
- req->num_regs++;
- }
- if (pir.rate && pir.burst) {
- *reg++ = NIX_AF_TL2X_PIR(schq);
- *regval++ = shaper2regval(&pir) | 1;
- req->num_regs++;
- }
- if (cir.rate && cir.burst) {
- *reg++ = NIX_AF_TL2X_CIR(schq);
- *regval++ = shaper2regval(&cir) | 1;
- req->num_regs++;
+ regval[k] = BIT_ULL(12) | nix_get_relchan(dev);
+ k++;
}
- rc = send_tm_reqval(mbox, req);
- if (rc)
- goto error;
break;
case NIX_TXSCH_LVL_TL1:
- req = otx2_mbox_alloc_msg_nix_txschq_cfg(mbox);
- req->lvl = hw_lvl;
- req->num_regs = 0;
- reg = req->reg;
- regval = req->regval;
+ reg[k] = NIX_AF_TL1X_TOPOLOGY(schq);
+ regval[k] = (child << 32) | (rr_prio << 1 /*RR_PRIO*/);
+ k++;
- *reg++ = NIX_AF_TL1X_SCHEDULE(schq);
- *regval++ = rr_quantum;
- req->num_regs++;
- *reg++ = NIX_AF_TL1X_TOPOLOGY(schq);
- *regval++ = (child << 32) | (rr_prio << 1 /*RR_PRIO*/);
- req->num_regs++;
- if (cir.rate && cir.burst) {
- *reg++ = NIX_AF_TL1X_CIR(schq);
- *regval++ = shaper2regval(&cir) | 1;
- req->num_regs++;
- }
-
- rc = send_tm_reqval(mbox, req);
- if (rc)
- goto error;
break;
}
+ /* Prepare schedule config */
+ k += prepare_tm_sched_reg(dev, tm_node, ®[k], ®val[k]);
+
+ /* Prepare shaping config */
+ k += prepare_tm_shaper_reg(tm_node, profile, ®[k], ®val[k]);
+
+ if (!k)
+ return 0;
+
+ /* Copy and send config mbox */
+ req = otx2_mbox_alloc_msg_nix_txschq_cfg(mbox);
+ req->lvl = hw_lvl;
+ req->num_regs = k;
+
+ otx2_mbox_memcpy(req->reg, reg, sizeof(uint64_t) * k);
+ otx2_mbox_memcpy(req->regval, regval, sizeof(uint64_t) * k);
+ otx2_mbox_memcpy(req->regval_mask, regval_mask, sizeof(uint64_t) * k);
+
+ rc = otx2_mbox_process(mbox);
+ if (rc)
+ goto error;
+
return 0;
error:
otx2_err("Txschq cfg request failed for node %p, rc=%d", tm_node, rc);
@@ -541,13 +591,14 @@ static int
nix_tm_txsch_reg_config(struct otx2_eth_dev *dev)
{
struct otx2_nix_tm_node *tm_node;
- uint32_t lvl;
+ uint32_t hw_lvl;
int rc = 0;
- for (lvl = 0; lvl < (uint32_t)dev->otx2_tm_root_lvl + 1; lvl++) {
+ for (hw_lvl = 0; hw_lvl <= dev->otx2_tm_root_lvl; hw_lvl++) {
TAILQ_FOREACH(tm_node, &dev->node_list, node) {
- if (tm_node->hw_lvl_id == lvl) {
- rc = populate_tm_registers(dev, tm_node);
+ if (tm_node->hw_lvl == hw_lvl &&
+ tm_node->hw_lvl != NIX_TXSCH_LVL_CNT) {
+ rc = populate_tm_reg(dev, tm_node);
if (rc)
goto exit;
}
@@ -637,8 +688,8 @@ nix_tm_update_parent_info(struct otx2_eth_dev *dev)
static int
nix_tm_node_add_to_list(struct otx2_eth_dev *dev, uint32_t node_id,
uint32_t parent_node_id, uint32_t priority,
- uint32_t weight, uint16_t hw_lvl_id,
- uint16_t level_id, bool user,
+ uint32_t weight, uint16_t hw_lvl,
+ uint16_t lvl, bool user,
struct rte_tm_node_params *params)
{
struct otx2_nix_tm_shaper_profile *shaper_profile;
@@ -655,8 +706,8 @@ nix_tm_node_add_to_list(struct otx2_eth_dev *dev, uint32_t node_id,
if (!tm_node)
return -ENOMEM;
- tm_node->level_id = level_id;
- tm_node->hw_lvl_id = hw_lvl_id;
+ tm_node->lvl = lvl;
+ tm_node->hw_lvl = hw_lvl;
tm_node->id = node_id;
tm_node->priority = priority;
@@ -935,18 +986,18 @@ nix_tm_free_resources(struct otx2_eth_dev *dev, uint32_t flags_mask,
continue;
if (nix_tm_have_tl1_access(dev) &&
- tm_node->hw_lvl_id == NIX_TXSCH_LVL_TL1)
+ tm_node->hw_lvl == NIX_TXSCH_LVL_TL1)
skip_node = true;
otx2_tm_dbg("Free hwres for node %u, hwlvl %u, hw_id %u (%p)",
- tm_node->id, tm_node->hw_lvl_id,
+ tm_node->id, tm_node->hw_lvl,
tm_node->hw_id, tm_node);
/* Free specific HW resource if requested */
if (!skip_node && flags_mask &&
tm_node->flags & NIX_TM_NODE_HWRES) {
req = otx2_mbox_alloc_msg_nix_txsch_free(mbox);
req->flags = 0;
- req->schq_lvl = tm_node->hw_lvl_id;
+ req->schq_lvl = tm_node->hw_lvl;
req->schq = tm_node->hw_id;
rc = otx2_mbox_process(mbox);
if (rc)
@@ -1010,17 +1061,17 @@ nix_tm_assign_id_to_node(struct otx2_eth_dev *dev,
uint32_t l_id, schq_index;
otx2_tm_dbg("Assign hw id for child node %u, lvl %u, hw_lvl %u (%p)",
- child->id, child->level_id, child->hw_lvl_id, child);
+ child->id, child->lvl, child->hw_lvl, child);
child->flags |= NIX_TM_NODE_HWRES;
/* Process root nodes */
if (dev->otx2_tm_root_lvl == NIX_TXSCH_LVL_TL2 &&
- child->hw_lvl_id == dev->otx2_tm_root_lvl && !parent) {
+ child->hw_lvl == dev->otx2_tm_root_lvl && !parent) {
int idx = 0;
uint32_t tschq_con_index;
- l_id = child->hw_lvl_id;
+ l_id = child->hw_lvl;
tschq_con_index = dev->txschq_contig_index[l_id];
hw_id = dev->txschq_contig_list[l_id][tschq_con_index];
child->hw_id = hw_id;
@@ -1032,10 +1083,10 @@ nix_tm_assign_id_to_node(struct otx2_eth_dev *dev,
return 0;
}
if (dev->otx2_tm_root_lvl == NIX_TXSCH_LVL_TL1 &&
- child->hw_lvl_id == dev->otx2_tm_root_lvl && !parent) {
+ child->hw_lvl == dev->otx2_tm_root_lvl && !parent) {
uint32_t tschq_con_index;
- l_id = child->hw_lvl_id;
+ l_id = child->hw_lvl;
tschq_con_index = dev->txschq_index[l_id];
hw_id = dev->txschq_list[l_id][tschq_con_index];
child->hw_id = hw_id;
@@ -1044,7 +1095,7 @@ nix_tm_assign_id_to_node(struct otx2_eth_dev *dev,
}
/* Process children with parents */
- l_id = child->hw_lvl_id;
+ l_id = child->hw_lvl;
schq_index = dev->txschq_index[l_id];
schq_con_index = dev->txschq_contig_index[l_id];
@@ -1069,8 +1120,8 @@ nix_tm_assign_hw_id(struct otx2_eth_dev *dev)
for (i = NIX_TXSCH_LVL_TL1; i > 0; i--) {
TAILQ_FOREACH(parent, &dev->node_list, node) {
- child_hw_lvl = parent->hw_lvl_id - 1;
- if (parent->hw_lvl_id != i)
+ child_hw_lvl = parent->hw_lvl - 1;
+ if (parent->hw_lvl != i)
continue;
TAILQ_FOREACH(child, &dev->node_list, node) {
if (!child->parent)
@@ -1087,7 +1138,7 @@ nix_tm_assign_hw_id(struct otx2_eth_dev *dev)
* Explicitly assign id to parent node if it
* doesn't have a parent
*/
- if (parent->hw_lvl_id == dev->otx2_tm_root_lvl)
+ if (parent->hw_lvl == dev->otx2_tm_root_lvl)
nix_tm_assign_id_to_node(dev, parent, NULL);
}
}
@@ -1102,7 +1153,7 @@ nix_tm_count_req_schq(struct otx2_eth_dev *dev,
uint8_t contig_count;
TAILQ_FOREACH(tm_node, &dev->node_list, node) {
- if (lvl == tm_node->hw_lvl_id) {
+ if (lvl == tm_node->hw_lvl) {
req->schq[lvl - 1] += tm_node->rr_num;
if (tm_node->max_prio != UINT32_MAX) {
contig_count = tm_node->max_prio + 1;
@@ -1111,7 +1162,7 @@ nix_tm_count_req_schq(struct otx2_eth_dev *dev,
}
if (lvl == dev->otx2_tm_root_lvl &&
dev->otx2_tm_root_lvl && lvl == NIX_TXSCH_LVL_TL2 &&
- tm_node->hw_lvl_id == dev->otx2_tm_root_lvl) {
+ tm_node->hw_lvl == dev->otx2_tm_root_lvl) {
req->schq_contig[dev->otx2_tm_root_lvl]++;
}
}
@@ -1192,7 +1243,7 @@ nix_tm_alloc_resources(struct rte_eth_dev *eth_dev, bool xmit_enable)
continue;
/* Enable xmit on sq */
- if (tm_node->level_id != OTX2_TM_LVL_QUEUE) {
+ if (tm_node->lvl != OTX2_TM_LVL_QUEUE) {
tm_node->flags |= NIX_TM_NODE_ENABLED;
continue;
}
@@ -1210,8 +1261,7 @@ nix_tm_alloc_resources(struct rte_eth_dev *eth_dev, bool xmit_enable)
txq = eth_dev->data->tx_queues[sq];
smq = tm_node->parent->hw_id;
- rr_quantum = (tm_node->weight *
- NIX_TM_RR_QUANTUM_MAX) / MAX_SCHED_WEIGHT;
+ rr_quantum = NIX_TM_WEIGHT_TO_RR_QUANTUM(tm_node->weight);
rc = nix_tm_sw_xon(txq, smq, rr_quantum);
if (rc)
@@ -1332,6 +1382,7 @@ void otx2_nix_tm_conf_init(struct rte_eth_dev *eth_dev)
int otx2_nix_tm_init_default(struct rte_eth_dev *eth_dev)
{
+ struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(eth_dev);
struct otx2_eth_dev *dev = otx2_eth_pmd_priv(eth_dev);
uint16_t sq_cnt = eth_dev->data->nb_tx_queues;
int rc;
@@ -1347,6 +1398,13 @@ int otx2_nix_tm_init_default(struct rte_eth_dev *eth_dev)
nix_tm_clear_shaper_profiles(dev);
dev->tm_flags = NIX_TM_DEFAULT_TREE;
+ /* Disable TL1 Static Priority when VF's are enabled
+ * as otherwise VF's TL2 reallocation will be needed
+ * runtime to support a specific topology of PF.
+ */
+ if (pci_dev->max_vfs)
+ dev->tm_flags |= NIX_TM_TL1_NO_SP;
+
rc = nix_tm_prepare_default_tree(eth_dev);
if (rc != 0)
return rc;
@@ -1397,15 +1455,14 @@ otx2_nix_tm_get_leaf_data(struct otx2_eth_dev *dev, uint16_t sq,
tm_node = nix_tm_node_search(dev, sq, true);
/* Check if we found a valid leaf node */
- if (!tm_node || tm_node->level_id != OTX2_TM_LVL_QUEUE ||
+ if (!tm_node || tm_node->lvl != OTX2_TM_LVL_QUEUE ||
!tm_node->parent || tm_node->parent->hw_id == UINT32_MAX) {
return -EIO;
}
/* Get SMQ Id of leaf node's parent */
*smq = tm_node->parent->hw_id;
- *rr_quantum = (tm_node->weight * NIX_TM_RR_QUANTUM_MAX)
- / MAX_SCHED_WEIGHT;
+ *rr_quantum = NIX_TM_WEIGHT_TO_RR_QUANTUM(tm_node->weight);
rc = nix_smq_xoff(dev, *smq, false);
if (rc)
diff --git a/drivers/net/octeontx2/otx2_tm.h b/drivers/net/octeontx2/otx2_tm.h
index 4712b09..ad7727e 100644
--- a/drivers/net/octeontx2/otx2_tm.h
+++ b/drivers/net/octeontx2/otx2_tm.h
@@ -10,6 +10,7 @@
#include <rte_tm_driver.h>
#define NIX_TM_DEFAULT_TREE BIT_ULL(0)
+#define NIX_TM_TL1_NO_SP BIT_ULL(3)
struct otx2_eth_dev;
@@ -27,16 +28,18 @@ struct otx2_nix_tm_node {
uint32_t hw_id;
uint32_t priority;
uint32_t weight;
- uint16_t level_id;
- uint16_t hw_lvl_id;
+ uint16_t lvl;
+ uint16_t hw_lvl;
uint32_t rr_prio;
uint32_t rr_num;
uint32_t max_prio;
uint32_t parent_hw_id;
- uint32_t flags;
+ uint32_t flags:16;
#define NIX_TM_NODE_HWRES BIT_ULL(0)
#define NIX_TM_NODE_ENABLED BIT_ULL(1)
#define NIX_TM_NODE_USER BIT_ULL(2)
+ /* Shaper algorithm for RED state @NIX_REDALG_E */
+ uint32_t red_algo:2;
struct otx2_nix_tm_node *parent;
struct rte_tm_node_params params;
};
@@ -45,7 +48,7 @@ struct otx2_nix_tm_shaper_profile {
TAILQ_ENTRY(otx2_nix_tm_shaper_profile) shaper;
uint32_t shaper_profile_id;
uint32_t reference_count;
- struct rte_tm_shaper_params profile;
+ struct rte_tm_shaper_params params; /* Rate in bits/sec */
};
struct shaper_params {
@@ -63,6 +66,10 @@ TAILQ_HEAD(otx2_nix_tm_shaper_profile_list, otx2_nix_tm_shaper_profile);
#define MAX_SCHED_WEIGHT ((uint8_t)~0)
#define NIX_TM_RR_QUANTUM_MAX (BIT_ULL(24) - 1)
+#define NIX_TM_WEIGHT_TO_RR_QUANTUM(__weight) \
+ ((((__weight) & MAX_SCHED_WEIGHT) * \
+ NIX_TM_RR_QUANTUM_MAX) / MAX_SCHED_WEIGHT)
+
/* DEFAULT_RR_WEIGHT * NIX_TM_RR_QUANTUM_MAX / MAX_SCHED_WEIGHT */
/* = NIX_MAX_HW_MTU */
@@ -73,52 +80,27 @@ TAILQ_HEAD(otx2_nix_tm_shaper_profile_list, otx2_nix_tm_shaper_profile);
#define MAX_RATE_EXPONENT 0xf
#define MAX_RATE_MANTISSA 0xff
-/** NIX rate limiter time-wheel resolution */
-#define L1_TIME_WHEEL_CCLK_TICKS 240
-#define LX_TIME_WHEEL_CCLK_TICKS 860
+#define NIX_SHAPER_RATE_CONST ((uint64_t)2E6)
-#define CCLK_HZ 1000000000
-
-/* NIX rate calculation
- * CCLK = coprocessor-clock frequency in MHz
- * CCLK_TICKS = rate limiter time-wheel resolution
- *
+/* NIX rate calculation in Bits/Sec
* PIR_ADD = ((256 + NIX_*_PIR[RATE_MANTISSA])
* << NIX_*_PIR[RATE_EXPONENT]) / 256
- * PIR = (CCLK / (CCLK_TICKS << NIX_*_PIR[RATE_DIVIDER_EXPONENT]))
- * * PIR_ADD
+ * PIR = (2E6 * PIR_ADD / (1 << NIX_*_PIR[RATE_DIVIDER_EXPONENT]))
*
* CIR_ADD = ((256 + NIX_*_CIR[RATE_MANTISSA])
* << NIX_*_CIR[RATE_EXPONENT]) / 256
- * CIR = (CCLK / (CCLK_TICKS << NIX_*_CIR[RATE_DIVIDER_EXPONENT]))
- * * CIR_ADD
+ * CIR = (2E6 * CIR_ADD / (CCLK_TICKS << NIX_*_CIR[RATE_DIVIDER_EXPONENT]))
*/
-#define SHAPER_RATE(cclk_hz, cclk_ticks, \
- exponent, mantissa, div_exp) \
- (((uint64_t)(cclk_hz) * ((256 + (mantissa)) << (exponent))) \
- / (((cclk_ticks) << (div_exp)) * 256))
+#define SHAPER_RATE(exponent, mantissa, div_exp) \
+ ((NIX_SHAPER_RATE_CONST * ((256 + (mantissa)) << (exponent)))\
+ / (((1ull << (div_exp)) * 256)))
-#define L1_SHAPER_RATE(cclk_hz, exponent, mantissa, div_exp) \
- SHAPER_RATE(cclk_hz, L1_TIME_WHEEL_CCLK_TICKS, \
- exponent, mantissa, div_exp)
+/* 96xx rate limits in Bits/Sec */
+#define MIN_SHAPER_RATE \
+ SHAPER_RATE(0, 0, MAX_RATE_DIV_EXP)
-#define LX_SHAPER_RATE(cclk_hz, exponent, mantissa, div_exp) \
- SHAPER_RATE(cclk_hz, LX_TIME_WHEEL_CCLK_TICKS, \
- exponent, mantissa, div_exp)
-
-/* Shaper rate limits */
-#define MIN_SHAPER_RATE(cclk_hz, cclk_ticks) \
- SHAPER_RATE(cclk_hz, cclk_ticks, 0, 0, MAX_RATE_DIV_EXP)
-
-#define MAX_SHAPER_RATE(cclk_hz, cclk_ticks) \
- SHAPER_RATE(cclk_hz, cclk_ticks, MAX_RATE_EXPONENT, \
- MAX_RATE_MANTISSA, 0)
-
-#define MIN_L1_SHAPER_RATE(cclk_hz) \
- MIN_SHAPER_RATE(cclk_hz, L1_TIME_WHEEL_CCLK_TICKS)
-
-#define MAX_L1_SHAPER_RATE(cclk_hz) \
- MAX_SHAPER_RATE(cclk_hz, L1_TIME_WHEEL_CCLK_TICKS)
+#define MAX_SHAPER_RATE \
+ SHAPER_RATE(MAX_RATE_EXPONENT, MAX_RATE_MANTISSA, 0)
/** TM Shaper - low level operations */
@@ -150,4 +132,25 @@ TAILQ_HEAD(otx2_nix_tm_shaper_profile_list, otx2_nix_tm_shaper_profile);
#define TXSCH_TL1_DFLT_RR_QTM ((1 << 24) - 1)
#define TXSCH_TL1_DFLT_RR_PRIO 1
+static inline const char *
+nix_hwlvl2str(uint32_t hw_lvl)
+{
+ switch (hw_lvl) {
+ case NIX_TXSCH_LVL_MDQ:
+ return "SMQ/MDQ";
+ case NIX_TXSCH_LVL_TL4:
+ return "TL4";
+ case NIX_TXSCH_LVL_TL3:
+ return "TL3";
+ case NIX_TXSCH_LVL_TL2:
+ return "TL2";
+ case NIX_TXSCH_LVL_TL1:
+ return "TL1";
+ default:
+ break;
+ }
+
+ return "???";
+}
+
#endif /* __OTX2_TM_H__ */
--
2.8.4
next prev parent reply other threads:[~2020-04-02 19:35 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-12 11:18 [dpdk-dev] [PATCH 00/11] net/octeontx2: add traffic manager support Nithin Dabilpuram
2020-03-12 11:18 ` [dpdk-dev] [PATCH 01/11] net/octeontx2: setup link config based on BP level Nithin Dabilpuram
2020-03-12 11:18 ` [dpdk-dev] [PATCH 02/11] net/octeontx2: restructure tm helper functions Nithin Dabilpuram
2020-03-12 11:18 ` [dpdk-dev] [PATCH 03/11] net/octeontx2: add dynamic topology update support Nithin Dabilpuram
2020-03-12 11:19 ` [dpdk-dev] [PATCH 04/11] net/octeontx2: add tm node add and delete cb Nithin Dabilpuram
2020-03-12 11:19 ` [dpdk-dev] [PATCH 05/11] net/octeontx2: add tm node suspend and resume cb Nithin Dabilpuram
2020-03-12 11:19 ` [dpdk-dev] [PATCH 06/11] net/octeontx2: add tm hierarchy commit callback Nithin Dabilpuram
2020-03-12 11:19 ` [dpdk-dev] [PATCH 07/11] net/octeontx2: add tm stats and shaper profile cbs Nithin Dabilpuram
2020-03-12 11:19 ` [dpdk-dev] [PATCH 08/11] net/octeontx2: add tm dynamic topology update cb Nithin Dabilpuram
2020-03-12 11:19 ` [dpdk-dev] [PATCH 09/11] net/octeontx2: add tm debug support Nithin Dabilpuram
2020-03-12 11:19 ` [dpdk-dev] [PATCH 10/11] net/octeontx2: add tx queue ratelimit callback Nithin Dabilpuram
2020-03-12 11:19 ` [dpdk-dev] [PATCH 11/11] net/octeontx2: add tm capability callbacks Nithin Dabilpuram
2020-03-13 11:08 ` [dpdk-dev] [PATCH 00/11] net/octeontx2: add traffic manager support Andrzej Ostruszka
2020-03-13 15:39 ` [dpdk-dev] [EXT] " Nithin Dabilpuram
2020-04-02 19:34 ` [dpdk-dev] [PATCH v2 " Nithin Dabilpuram
2020-04-02 19:34 ` [dpdk-dev] [PATCH v2 01/11] net/octeontx2: setup link config based on BP level Nithin Dabilpuram
2020-04-02 19:34 ` Nithin Dabilpuram [this message]
2020-04-02 19:34 ` [dpdk-dev] [PATCH v2 03/11] net/octeontx2: add dynamic topology update support Nithin Dabilpuram
2020-04-02 19:34 ` [dpdk-dev] [PATCH v2 04/11] net/octeontx2: add tm node add and delete cb Nithin Dabilpuram
2020-04-02 19:34 ` [dpdk-dev] [PATCH v2 05/11] net/octeontx2: add tm node suspend and resume cb Nithin Dabilpuram
2020-04-02 19:34 ` [dpdk-dev] [PATCH v2 06/11] net/octeontx2: add tm hierarchy commit callback Nithin Dabilpuram
2020-04-02 19:34 ` [dpdk-dev] [PATCH v2 07/11] net/octeontx2: add tm stats and shaper profile cbs Nithin Dabilpuram
2020-04-02 19:34 ` [dpdk-dev] [PATCH v2 08/11] net/octeontx2: add tm dynamic topology update cb Nithin Dabilpuram
2020-04-02 19:34 ` [dpdk-dev] [PATCH v2 09/11] net/octeontx2: add tm debug support Nithin Dabilpuram
2020-04-02 19:34 ` [dpdk-dev] [PATCH v2 10/11] net/octeontx2: add Tx queue ratelimit callback Nithin Dabilpuram
2020-04-02 19:34 ` [dpdk-dev] [PATCH v2 11/11] net/octeontx2: add tm capability callbacks Nithin Dabilpuram
2020-04-03 8:52 ` [dpdk-dev] [PATCH v3 00/11] net/octeontx2: add traffic manager support Nithin Dabilpuram
2020-04-03 8:52 ` [dpdk-dev] [PATCH v3 01/11] net/octeontx2: setup link config based on BP level Nithin Dabilpuram
2020-04-03 8:52 ` [dpdk-dev] [PATCH v3 02/11] net/octeontx2: restructure tm helper functions Nithin Dabilpuram
2020-04-03 8:52 ` [dpdk-dev] [PATCH v3 03/11] net/octeontx2: add dynamic topology update support Nithin Dabilpuram
2020-04-03 8:52 ` [dpdk-dev] [PATCH v3 04/11] net/octeontx2: add tm node add and delete cb Nithin Dabilpuram
2020-04-03 8:52 ` [dpdk-dev] [PATCH v3 05/11] net/octeontx2: add tm node suspend and resume cb Nithin Dabilpuram
2020-04-03 8:52 ` [dpdk-dev] [PATCH v3 06/11] net/octeontx2: add tm hierarchy commit callback Nithin Dabilpuram
2020-04-03 8:52 ` [dpdk-dev] [PATCH v3 07/11] net/octeontx2: add tm stats and shaper profile cbs Nithin Dabilpuram
2020-04-03 8:52 ` [dpdk-dev] [PATCH v3 08/11] net/octeontx2: add tm dynamic topology update cb Nithin Dabilpuram
2020-04-03 8:52 ` [dpdk-dev] [PATCH v3 09/11] net/octeontx2: add tm debug support Nithin Dabilpuram
2020-04-03 8:52 ` [dpdk-dev] [PATCH v3 10/11] net/octeontx2: add Tx queue ratelimit callback Nithin Dabilpuram
2020-04-03 8:52 ` [dpdk-dev] [PATCH v3 11/11] net/octeontx2: add tm capability callbacks Nithin Dabilpuram
2020-04-06 5:48 ` Jerin Jacob
2020-04-06 9:14 ` [dpdk-dev] [EXT] " Nithin Dabilpuram
2020-04-06 9:31 ` Jerin Jacob
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200402193453.17266-3-nithind1988@gmail.com \
--to=nithind1988@gmail.com \
--cc=dev@dpdk.org \
--cc=jerinj@marvell.com \
--cc=kirankumark@marvell.com \
--cc=kkanas@marvell.com \
--cc=ndabilpuram@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).