From: Wei Zhao <wei.zhao1@intel.com>
To: dev@dpdk.org
Cc: qi.z.zhang@intel.com, nannan.lu@intel.com, qi.fu@intel.com,
yuan.peng@intel.com, Wei Zhao <wei.zhao1@intel.com>
Subject: [dpdk-dev] [PATCH v3 09/13] net/ice: add support for IPv6 NAT-T
Date: Fri, 3 Apr 2020 10:43:49 +0800 [thread overview]
Message-ID: <20200403024353.24681-10-wei.zhao1@intel.com> (raw)
In-Reply-To: <20200403024353.24681-1-wei.zhao1@intel.com>
This patch add switch filter support for IPv6 NAT-T packets,
it enable swicth filter to direct ipv6 packets with
NAT-T payload to specific action.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
---
drivers/net/ice/ice_generic_flow.c | 14 ++++++++++++++
drivers/net/ice/ice_generic_flow.h | 2 ++
drivers/net/ice/ice_switch_filter.c | 19 +++++++++++++++++--
3 files changed, 33 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ice/ice_generic_flow.c b/drivers/net/ice/ice_generic_flow.c
index 04dcaba08..3365aeb86 100644
--- a/drivers/net/ice/ice_generic_flow.c
+++ b/drivers/net/ice/ice_generic_flow.c
@@ -1394,6 +1394,20 @@ enum rte_flow_item_type pattern_eth_ipv6_ah[] = {
RTE_FLOW_ITEM_TYPE_AH,
RTE_FLOW_ITEM_TYPE_END,
};
+enum rte_flow_item_type pattern_eth_ipv6_udp_esp[] = {
+ RTE_FLOW_ITEM_TYPE_ETH,
+ RTE_FLOW_ITEM_TYPE_IPV6,
+ RTE_FLOW_ITEM_TYPE_UDP,
+ RTE_FLOW_ITEM_TYPE_ESP,
+ RTE_FLOW_ITEM_TYPE_END,
+};
+enum rte_flow_item_type pattern_eth_ipv6_udp_ah[] = {
+ RTE_FLOW_ITEM_TYPE_ETH,
+ RTE_FLOW_ITEM_TYPE_IPV6,
+ RTE_FLOW_ITEM_TYPE_UDP,
+ RTE_FLOW_ITEM_TYPE_AH,
+ RTE_FLOW_ITEM_TYPE_END,
+};
enum rte_flow_item_type pattern_eth_ipv6_l2tp[] = {
RTE_FLOW_ITEM_TYPE_ETH,
RTE_FLOW_ITEM_TYPE_IPV6,
diff --git a/drivers/net/ice/ice_generic_flow.h b/drivers/net/ice/ice_generic_flow.h
index 65cd64c7f..25badf192 100644
--- a/drivers/net/ice/ice_generic_flow.h
+++ b/drivers/net/ice/ice_generic_flow.h
@@ -393,9 +393,11 @@ extern enum rte_flow_item_type pattern_eth_qinq_pppoes_ipv6_icmp6[];
/* ESP */
extern enum rte_flow_item_type pattern_eth_ipv6_esp[];
+extern enum rte_flow_item_type pattern_eth_ipv6_udp_esp[];
/* AH */
extern enum rte_flow_item_type pattern_eth_ipv6_ah[];
+extern enum rte_flow_item_type pattern_eth_ipv6_udp_ah[];
/* L2TP */
extern enum rte_flow_item_type pattern_eth_ipv6_l2tp[];
diff --git a/drivers/net/ice/ice_switch_filter.c b/drivers/net/ice/ice_switch_filter.c
index 9b4b9346c..4248b8911 100644
--- a/drivers/net/ice/ice_switch_filter.c
+++ b/drivers/net/ice/ice_switch_filter.c
@@ -150,8 +150,12 @@ ice_pattern_match_item ice_switch_pattern_dist_comms[] = {
ICE_SW_INSET_MAC_PPPOE_PROTO, ICE_INSET_NONE},
{pattern_eth_ipv6_esp,
ICE_INSET_NONE, ICE_INSET_NONE},
+ {pattern_eth_ipv6_udp_esp,
+ ICE_INSET_NONE, ICE_INSET_NONE},
{pattern_eth_ipv6_ah,
ICE_INSET_NONE, ICE_INSET_NONE},
+ {pattern_eth_ipv6_udp_ah,
+ ICE_INSET_NONE, ICE_INSET_NONE},
{pattern_eth_ipv6_l2tp,
ICE_INSET_NONE, ICE_INSET_NONE},
{pattern_eth_ipv4_pfcp,
@@ -224,8 +228,12 @@ ice_pattern_match_item ice_switch_pattern_perm[] = {
ICE_SW_INSET_PERM_TUNNEL_IPV4_TCP, ICE_INSET_NONE},
{pattern_eth_ipv6_esp,
ICE_INSET_NONE, ICE_INSET_NONE},
+ {pattern_eth_ipv6_udp_esp,
+ ICE_INSET_NONE, ICE_INSET_NONE},
{pattern_eth_ipv6_ah,
ICE_INSET_NONE, ICE_INSET_NONE},
+ {pattern_eth_ipv6_udp_ah,
+ ICE_INSET_NONE, ICE_INSET_NONE},
{pattern_eth_ipv6_l2tp,
ICE_INSET_NONE, ICE_INSET_NONE},
{pattern_eth_ipv4_pfcp,
@@ -364,6 +372,7 @@ ice_switch_inset_get(const struct rte_flow_item pattern[],
uint16_t tunnel_valid = 0;
uint16_t pppoe_valid = 0;
uint16_t ipv6_valiad = 0;
+ uint16_t udp_valiad = 0;
for (item = pattern; item->type !=
@@ -642,6 +651,7 @@ ice_switch_inset_get(const struct rte_flow_item pattern[],
case RTE_FLOW_ITEM_TYPE_UDP:
udp_spec = item->spec;
udp_mask = item->mask;
+ udp_valiad = 1;
if (udp_spec && udp_mask) {
/* Check UDP mask and update input set*/
if (udp_mask->hdr.dgram_len ||
@@ -974,7 +984,9 @@ ice_switch_inset_get(const struct rte_flow_item pattern[],
"Invalid esp item");
return -ENOTSUP;
}
- if (ipv6_valiad)
+ if (ipv6_valiad && udp_valiad)
+ *tun_type = ICE_SW_TUN_PROFID_IPV6_NAT_T;
+ else if (ipv6_valiad)
*tun_type = ICE_SW_TUN_PROFID_IPV6_ESP;
break;
@@ -988,7 +1000,9 @@ ice_switch_inset_get(const struct rte_flow_item pattern[],
"Invalid ah item");
return -ENOTSUP;
}
- if (ipv6_valiad)
+ if (ipv6_valiad && udp_valiad)
+ *tun_type = ICE_SW_TUN_PROFID_IPV6_NAT_T;
+ else if (ipv6_valiad)
*tun_type = ICE_SW_TUN_PROFID_IPV6_AH;
break;
@@ -1237,6 +1251,7 @@ ice_is_profile_rule(enum ice_sw_tunnel_type tun_type)
case ICE_SW_TUN_PROFID_IPV6_ESP:
case ICE_SW_TUN_PROFID_IPV6_AH:
case ICE_SW_TUN_PROFID_MAC_IPV6_L2TPV3:
+ case ICE_SW_TUN_PROFID_IPV6_NAT_T:
case ICE_SW_TUN_PROFID_IPV4_PFCP_NODE:
case ICE_SW_TUN_PROFID_IPV4_PFCP_SESSION:
case ICE_SW_TUN_PROFID_IPV6_PFCP_NODE:
--
2.19.1
next prev parent reply other threads:[~2020-04-03 3:06 UTC|newest]
Thread overview: 68+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-13 2:07 [dpdk-dev] [PATCH 0/7] add switch filter support for intel DCF Wei Zhao
2020-03-13 2:08 ` [dpdk-dev] [PATCH 1/7] net/ice: enable switch flow on DCF Wei Zhao
2020-03-13 2:08 ` [dpdk-dev] [PATCH 2/7] net/ice: support for more PPPoE input set Wei Zhao
2020-03-13 2:08 ` [dpdk-dev] [PATCH 3/7] net/ice: change swicth parser to support flexible mask Wei Zhao
2020-03-13 2:08 ` [dpdk-dev] [PATCH 4/7] net/ice: add support for MAC VLAN rule Wei Zhao
2020-03-13 2:08 ` [dpdk-dev] [PATCH 5/7] net/ice: change default tunnle type Wei Zhao
2020-03-13 2:08 ` [dpdk-dev] [PATCH 6/7] net/ice: add action number check for swicth Wei Zhao
2020-03-13 2:08 ` [dpdk-dev] [PATCH 7/7] net/ice: fix input set of VLAN item Wei Zhao
2020-04-02 6:46 ` [dpdk-dev] [PATCH v2 00/13]add switch filter support for intel DCF Wei Zhao
2020-04-02 6:46 ` [dpdk-dev] [PATCH v2 01/13] net/ice: enable switch flow on DCF Wei Zhao
2020-04-02 6:46 ` [dpdk-dev] [PATCH v2 02/13] net/ice: support for more PPPoE input set Wei Zhao
2020-04-02 9:31 ` Lu, Nannan
2020-04-02 6:46 ` [dpdk-dev] [PATCH v2 03/13] net/ice: change swicth parser to support flexible mask Wei Zhao
2020-04-02 6:46 ` [dpdk-dev] [PATCH v2 04/13] net/ice: add support for MAC VLAN rule Wei Zhao
2020-04-02 9:21 ` Lu, Nannan
2020-04-02 6:46 ` [dpdk-dev] [PATCH v2 05/13] net/ice: change default tunnle type Wei Zhao
2020-04-02 6:46 ` [dpdk-dev] [PATCH v2 06/13] net/ice: add action number check for swicth Wei Zhao
2020-04-02 8:29 ` Zhang, Qi Z
2020-04-02 8:31 ` Zhao1, Wei
2020-04-03 1:49 ` Lu, Nannan
2020-04-02 6:46 ` [dpdk-dev] [PATCH v2 07/13] net/ice: add support for ESP/AH/L2TP Wei Zhao
2020-04-02 6:46 ` [dpdk-dev] [PATCH v2 08/13] net/ice: add support for PFCP Wei Zhao
2020-04-02 6:46 ` [dpdk-dev] [PATCH v2 09/13] net/ice: add support for NAT-T Wei Zhao
2020-04-02 8:45 ` Zhang, Qi Z
2020-04-02 23:37 ` Zhao1, Wei
2020-04-02 6:46 ` [dpdk-dev] [PATCH v2 10/13] net/ice: add more flow support for permit mode Wei Zhao
2020-04-02 8:45 ` Zhang, Qi Z
2020-04-02 9:41 ` Zhao1, Wei
2020-04-02 6:46 ` [dpdk-dev] [PATCH v2 11/13] net/ice: fix input set of VLAN item Wei Zhao
2020-04-02 6:46 ` [dpdk-dev] [PATCH v2 12/13] net/ice: enable flow redirect on switch Wei Zhao
2020-04-02 7:34 ` Wang, Haiyue
2020-04-02 7:38 ` Xing, Beilei
2020-04-02 6:46 ` [dpdk-dev] [PATCH v2 13/13] net/ice: redirect switch rule to new VSI Wei Zhao
2020-04-02 7:32 ` Wang, Haiyue
2020-04-03 2:43 ` [dpdk-dev] [PATCH v3 00/13] add switch filter support for intel DCF Wei Zhao
2020-04-03 2:43 ` [dpdk-dev] [PATCH v3 01/13] net/ice: enable switch flow on DCF Wei Zhao
2020-04-03 2:43 ` [dpdk-dev] [PATCH v3 02/13] net/ice: support for more PPPoE input set Wei Zhao
2020-04-03 2:43 ` [dpdk-dev] [PATCH v3 03/13] net/ice: change swicth parser to support flexible mask Wei Zhao
2020-04-03 2:43 ` [dpdk-dev] [PATCH v3 04/13] net/ice: add support for MAC VLAN rule Wei Zhao
2020-04-03 2:43 ` [dpdk-dev] [PATCH v3 05/13] net/ice: change default tunnle type Wei Zhao
2020-04-03 2:43 ` [dpdk-dev] [PATCH v3 06/13] net/ice: add action number check for swicth Wei Zhao
2020-04-03 3:15 ` Zhang, Qi Z
2020-04-03 2:43 ` [dpdk-dev] [PATCH v3 07/13] net/ice: add support for ESP/AH/L2TP Wei Zhao
2020-04-03 2:43 ` [dpdk-dev] [PATCH v3 08/13] net/ice: add support for PFCP Wei Zhao
2020-04-03 3:16 ` Zhang, Qi Z
2020-04-03 3:18 ` Zhao1, Wei
2020-04-03 2:43 ` Wei Zhao [this message]
2020-04-03 2:43 ` [dpdk-dev] [PATCH v3 10/13] net/ice: add more flow support for permit stage Wei Zhao
2020-04-03 3:20 ` Zhang, Qi Z
2020-04-03 2:43 ` [dpdk-dev] [PATCH v3 11/13] net/ice: fix input set of VLAN item Wei Zhao
2020-04-03 2:43 ` [dpdk-dev] [PATCH v3 12/13] net/ice: enable flow redirect on switch Wei Zhao
2020-04-03 2:43 ` [dpdk-dev] [PATCH v3 13/13] net/ice: redirect switch rule to new VSI Wei Zhao
2020-04-03 4:45 ` [dpdk-dev] [PATCH v4 00/13] add switch filter support for intel DCF Wei Zhao
2020-04-03 4:45 ` [dpdk-dev] [PATCH v4 01/13] net/ice: enable switch flow on DCF Wei Zhao
2020-04-03 4:45 ` [dpdk-dev] [PATCH v4 02/13] net/ice: support for more PPPoE input set Wei Zhao
2020-04-03 4:45 ` [dpdk-dev] [PATCH v4 03/13] net/ice: change swicth parser to support flexible mask Wei Zhao
2020-04-03 4:46 ` [dpdk-dev] [PATCH v4 04/13] net/ice: add support for MAC VLAN rule Wei Zhao
2020-04-03 4:46 ` [dpdk-dev] [PATCH v4 05/13] net/ice: change default tunnle type Wei Zhao
2020-04-03 4:46 ` [dpdk-dev] [PATCH v4 06/13] net/ice: add action number check for swicth Wei Zhao
2020-04-03 4:46 ` [dpdk-dev] [PATCH v4 07/13] net/ice: add support for ESP/AH/L2TP Wei Zhao
2020-04-03 4:46 ` [dpdk-dev] [PATCH v4 08/13] net/ice: add support for PFCP Wei Zhao
2020-04-03 4:46 ` [dpdk-dev] [PATCH v4 09/13] net/ice: add support for IPv6 NAT-T Wei Zhao
2020-04-03 4:46 ` [dpdk-dev] [PATCH v4 10/13] net/ice: add more flow support for permission stage Wei Zhao
2020-04-03 4:46 ` [dpdk-dev] [PATCH v4 11/13] net/ice: fix input set of VLAN item Wei Zhao
2020-04-03 4:46 ` [dpdk-dev] [PATCH v4 12/13] net/ice: enable flow redirect on switch Wei Zhao
2020-04-03 4:46 ` [dpdk-dev] [PATCH v4 13/13] net/ice: redirect switch rule to new VSI Wei Zhao
2020-04-03 5:09 ` [dpdk-dev] [PATCH v4 00/13] add switch filter support for intel DCF Zhang, Qi Z
2020-04-04 6:17 ` Ye Xiaolong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200403024353.24681-10-wei.zhao1@intel.com \
--to=wei.zhao1@intel.com \
--cc=dev@dpdk.org \
--cc=nannan.lu@intel.com \
--cc=qi.fu@intel.com \
--cc=qi.z.zhang@intel.com \
--cc=yuan.peng@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).