From: Nithin Dabilpuram <nithind1988@gmail.com>
To: Jerin Jacob <jerinj@marvell.com>,
Nithin Dabilpuram <ndabilpuram@marvell.com>,
Kiran Kumar K <kirankumark@marvell.com>
Cc: dev@dpdk.org, kkanas@marvell.com
Subject: [dpdk-dev] [PATCH v3 07/11] net/octeontx2: add tm stats and shaper profile cbs
Date: Fri, 3 Apr 2020 14:22:12 +0530 [thread overview]
Message-ID: <20200403085216.32684-8-nithind1988@gmail.com> (raw)
In-Reply-To: <20200403085216.32684-1-nithind1988@gmail.com>
From: Nithin Dabilpuram <ndabilpuram@marvell.com>
Add TM support for stats read and private shaper
profile addition or deletion.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Krzysztof Kanas <kkanas@marvell.com>
---
drivers/net/octeontx2/otx2_tm.c | 272 ++++++++++++++++++++++++++++++++++++++++
drivers/net/octeontx2/otx2_tm.h | 4 +
2 files changed, 276 insertions(+)
diff --git a/drivers/net/octeontx2/otx2_tm.c b/drivers/net/octeontx2/otx2_tm.c
index 1f8642a..68771d1 100644
--- a/drivers/net/octeontx2/otx2_tm.c
+++ b/drivers/net/octeontx2/otx2_tm.c
@@ -1674,6 +1674,47 @@ validate_prio(struct otx2_eth_dev *dev, uint32_t lvl,
}
static int
+read_tm_reg(struct otx2_mbox *mbox, uint64_t reg,
+ uint64_t *regval, uint32_t hw_lvl)
+{
+ volatile struct nix_txschq_config *req;
+ struct nix_txschq_config *rsp;
+ int rc;
+
+ req = otx2_mbox_alloc_msg_nix_txschq_cfg(mbox);
+ req->read = 1;
+ req->lvl = hw_lvl;
+ req->reg[0] = reg;
+ req->num_regs = 1;
+
+ rc = otx2_mbox_process_msg(mbox, (void **)&rsp);
+ if (rc)
+ return rc;
+ *regval = rsp->regval[0];
+ return 0;
+}
+
+/* Search for min rate in topology */
+static void
+nix_tm_shaper_profile_update_min(struct otx2_eth_dev *dev)
+{
+ struct otx2_nix_tm_shaper_profile *profile;
+ uint64_t rate_min = 1E9; /* 1 Gbps */
+
+ TAILQ_FOREACH(profile, &dev->shaper_profile_list, shaper) {
+ if (profile->params.peak.rate &&
+ profile->params.peak.rate < rate_min)
+ rate_min = profile->params.peak.rate;
+
+ if (profile->params.committed.rate &&
+ profile->params.committed.rate < rate_min)
+ rate_min = profile->params.committed.rate;
+ }
+
+ dev->tm_rate_min = rate_min;
+}
+
+static int
nix_xmit_disable(struct rte_eth_dev *eth_dev)
{
struct otx2_eth_dev *dev = otx2_eth_pmd_priv(eth_dev);
@@ -1772,6 +1813,145 @@ nix_xmit_disable(struct rte_eth_dev *eth_dev)
}
static int
+otx2_nix_tm_node_type_get(struct rte_eth_dev *eth_dev, uint32_t node_id,
+ int *is_leaf, struct rte_tm_error *error)
+{
+ struct otx2_eth_dev *dev = otx2_eth_pmd_priv(eth_dev);
+ struct otx2_nix_tm_node *tm_node;
+
+ if (is_leaf == NULL) {
+ error->type = RTE_TM_ERROR_TYPE_UNSPECIFIED;
+ return -EINVAL;
+ }
+
+ tm_node = nix_tm_node_search(dev, node_id, true);
+ if (node_id == RTE_TM_NODE_ID_NULL || !tm_node) {
+ error->type = RTE_TM_ERROR_TYPE_NODE_ID;
+ return -EINVAL;
+ }
+ if (nix_tm_is_leaf(dev, tm_node->lvl))
+ *is_leaf = true;
+ else
+ *is_leaf = false;
+
+ return 0;
+}
+
+static int
+otx2_nix_tm_shaper_profile_add(struct rte_eth_dev *eth_dev,
+ uint32_t profile_id,
+ struct rte_tm_shaper_params *params,
+ struct rte_tm_error *error)
+{
+ struct otx2_eth_dev *dev = otx2_eth_pmd_priv(eth_dev);
+ struct otx2_nix_tm_shaper_profile *profile;
+
+ profile = nix_tm_shaper_profile_search(dev, profile_id);
+ if (profile) {
+ error->type = RTE_TM_ERROR_TYPE_SHAPER_PROFILE_ID;
+ error->message = "shaper profile ID exist";
+ return -EINVAL;
+ }
+
+ /* Committed rate and burst size can be enabled/disabled */
+ if (params->committed.size || params->committed.rate) {
+ if (params->committed.size < MIN_SHAPER_BURST ||
+ params->committed.size > MAX_SHAPER_BURST) {
+ error->type =
+ RTE_TM_ERROR_TYPE_SHAPER_PROFILE_COMMITTED_SIZE;
+ return -EINVAL;
+ } else if (!shaper_rate_to_nix(params->committed.rate * 8,
+ NULL, NULL, NULL)) {
+ error->type =
+ RTE_TM_ERROR_TYPE_SHAPER_PROFILE_COMMITTED_RATE;
+ error->message = "shaper committed rate invalid";
+ return -EINVAL;
+ }
+ }
+
+ /* Peak rate and burst size can be enabled/disabled */
+ if (params->peak.size || params->peak.rate) {
+ if (params->peak.size < MIN_SHAPER_BURST ||
+ params->peak.size > MAX_SHAPER_BURST) {
+ error->type =
+ RTE_TM_ERROR_TYPE_SHAPER_PROFILE_PEAK_SIZE;
+ return -EINVAL;
+ } else if (!shaper_rate_to_nix(params->peak.rate * 8,
+ NULL, NULL, NULL)) {
+ error->type =
+ RTE_TM_ERROR_TYPE_SHAPER_PROFILE_COMMITTED_RATE;
+ error->message = "shaper peak rate invalid";
+ return -EINVAL;
+ }
+ }
+
+ profile = rte_zmalloc("otx2_nix_tm_shaper_profile",
+ sizeof(struct otx2_nix_tm_shaper_profile), 0);
+ if (!profile)
+ return -ENOMEM;
+
+ profile->shaper_profile_id = profile_id;
+ rte_memcpy(&profile->params, params,
+ sizeof(struct rte_tm_shaper_params));
+ TAILQ_INSERT_TAIL(&dev->shaper_profile_list, profile, shaper);
+
+ otx2_tm_dbg("Added TM shaper profile %u, "
+ " pir %" PRIu64 " , pbs %" PRIu64 ", cir %" PRIu64
+ ", cbs %" PRIu64 " , adj %u",
+ profile_id,
+ params->peak.rate * 8,
+ params->peak.size,
+ params->committed.rate * 8,
+ params->committed.size,
+ params->pkt_length_adjust);
+
+ /* Translate rate as bits per second */
+ profile->params.peak.rate = profile->params.peak.rate * 8;
+ profile->params.committed.rate = profile->params.committed.rate * 8;
+ /* Always use PIR for single rate shaping */
+ if (!params->peak.rate && params->committed.rate) {
+ profile->params.peak = profile->params.committed;
+ memset(&profile->params.committed, 0,
+ sizeof(profile->params.committed));
+ }
+
+ /* update min rate */
+ nix_tm_shaper_profile_update_min(dev);
+ return 0;
+}
+
+static int
+otx2_nix_tm_shaper_profile_delete(struct rte_eth_dev *eth_dev,
+ uint32_t profile_id,
+ struct rte_tm_error *error)
+{
+ struct otx2_nix_tm_shaper_profile *profile;
+ struct otx2_eth_dev *dev = otx2_eth_pmd_priv(eth_dev);
+
+ profile = nix_tm_shaper_profile_search(dev, profile_id);
+
+ if (!profile) {
+ error->type = RTE_TM_ERROR_TYPE_SHAPER_PROFILE_ID;
+ error->message = "shaper profile ID not exist";
+ return -EINVAL;
+ }
+
+ if (profile->reference_count) {
+ error->type = RTE_TM_ERROR_TYPE_SHAPER_PROFILE;
+ error->message = "shaper profile in use";
+ return -EINVAL;
+ }
+
+ otx2_tm_dbg("Removing TM shaper profile %u", profile_id);
+ TAILQ_REMOVE(&dev->shaper_profile_list, profile, shaper);
+ rte_free(profile);
+
+ /* update min rate */
+ nix_tm_shaper_profile_update_min(dev);
+ return 0;
+}
+
+static int
otx2_nix_tm_node_add(struct rte_eth_dev *eth_dev, uint32_t node_id,
uint32_t parent_node_id, uint32_t priority,
uint32_t weight, uint32_t lvl,
@@ -2057,12 +2237,104 @@ otx2_nix_tm_hierarchy_commit(struct rte_eth_dev *eth_dev,
return 0;
}
+static int
+otx2_nix_tm_node_stats_read(struct rte_eth_dev *eth_dev, uint32_t node_id,
+ struct rte_tm_node_stats *stats,
+ uint64_t *stats_mask, int clear,
+ struct rte_tm_error *error)
+{
+ struct otx2_eth_dev *dev = otx2_eth_pmd_priv(eth_dev);
+ struct otx2_nix_tm_node *tm_node;
+ uint64_t reg, val;
+ int64_t *addr;
+ int rc = 0;
+
+ tm_node = nix_tm_node_search(dev, node_id, true);
+ if (!tm_node) {
+ error->type = RTE_TM_ERROR_TYPE_NODE_ID;
+ error->message = "no such node";
+ return -EINVAL;
+ }
+
+ /* Stats support only for leaf node or TL1 root */
+ if (nix_tm_is_leaf(dev, tm_node->lvl)) {
+ reg = (((uint64_t)tm_node->id) << 32);
+
+ /* Packets */
+ addr = (int64_t *)(dev->base + NIX_LF_SQ_OP_PKTS);
+ val = otx2_atomic64_add_nosync(reg, addr);
+ if (val & OP_ERR)
+ val = 0;
+ stats->n_pkts = val - tm_node->last_pkts;
+
+ /* Bytes */
+ addr = (int64_t *)(dev->base + NIX_LF_SQ_OP_OCTS);
+ val = otx2_atomic64_add_nosync(reg, addr);
+ if (val & OP_ERR)
+ val = 0;
+ stats->n_bytes = val - tm_node->last_bytes;
+
+ if (clear) {
+ tm_node->last_pkts = stats->n_pkts;
+ tm_node->last_bytes = stats->n_bytes;
+ }
+
+ *stats_mask = RTE_TM_STATS_N_PKTS | RTE_TM_STATS_N_BYTES;
+
+ } else if (tm_node->hw_lvl == NIX_TXSCH_LVL_TL1) {
+ error->type = RTE_TM_ERROR_TYPE_UNSPECIFIED;
+ error->message = "stats read error";
+
+ /* RED Drop packets */
+ reg = NIX_AF_TL1X_DROPPED_PACKETS(tm_node->hw_id);
+ rc = read_tm_reg(dev->mbox, reg, &val, NIX_TXSCH_LVL_TL1);
+ if (rc)
+ goto exit;
+ stats->leaf.n_pkts_dropped[RTE_COLOR_RED] =
+ val - tm_node->last_pkts;
+
+ /* RED Drop bytes */
+ reg = NIX_AF_TL1X_DROPPED_BYTES(tm_node->hw_id);
+ rc = read_tm_reg(dev->mbox, reg, &val, NIX_TXSCH_LVL_TL1);
+ if (rc)
+ goto exit;
+ stats->leaf.n_bytes_dropped[RTE_COLOR_RED] =
+ val - tm_node->last_bytes;
+
+ /* Clear stats */
+ if (clear) {
+ tm_node->last_pkts =
+ stats->leaf.n_pkts_dropped[RTE_COLOR_RED];
+ tm_node->last_bytes =
+ stats->leaf.n_bytes_dropped[RTE_COLOR_RED];
+ }
+
+ *stats_mask = RTE_TM_STATS_N_PKTS_RED_DROPPED |
+ RTE_TM_STATS_N_BYTES_RED_DROPPED;
+
+ } else {
+ error->type = RTE_TM_ERROR_TYPE_NODE_ID;
+ error->message = "unsupported node";
+ rc = -EINVAL;
+ }
+
+exit:
+ return rc;
+}
+
const struct rte_tm_ops otx2_tm_ops = {
+ .node_type_get = otx2_nix_tm_node_type_get,
+
+ .shaper_profile_add = otx2_nix_tm_shaper_profile_add,
+ .shaper_profile_delete = otx2_nix_tm_shaper_profile_delete,
+
.node_add = otx2_nix_tm_node_add,
.node_delete = otx2_nix_tm_node_delete,
.node_suspend = otx2_nix_tm_node_suspend,
.node_resume = otx2_nix_tm_node_resume,
.hierarchy_commit = otx2_nix_tm_hierarchy_commit,
+
+ .node_stats_read = otx2_nix_tm_node_stats_read,
};
static int
diff --git a/drivers/net/octeontx2/otx2_tm.h b/drivers/net/octeontx2/otx2_tm.h
index ebb4e90..20e2069 100644
--- a/drivers/net/octeontx2/otx2_tm.h
+++ b/drivers/net/octeontx2/otx2_tm.h
@@ -46,6 +46,10 @@ struct otx2_nix_tm_node {
struct otx2_nix_tm_node *parent;
struct rte_tm_node_params params;
+
+ /* Last stats */
+ uint64_t last_pkts;
+ uint64_t last_bytes;
};
struct otx2_nix_tm_shaper_profile {
--
2.8.4
next prev parent reply other threads:[~2020-04-03 8:53 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-12 11:18 [dpdk-dev] [PATCH 00/11] net/octeontx2: add traffic manager support Nithin Dabilpuram
2020-03-12 11:18 ` [dpdk-dev] [PATCH 01/11] net/octeontx2: setup link config based on BP level Nithin Dabilpuram
2020-03-12 11:18 ` [dpdk-dev] [PATCH 02/11] net/octeontx2: restructure tm helper functions Nithin Dabilpuram
2020-03-12 11:18 ` [dpdk-dev] [PATCH 03/11] net/octeontx2: add dynamic topology update support Nithin Dabilpuram
2020-03-12 11:19 ` [dpdk-dev] [PATCH 04/11] net/octeontx2: add tm node add and delete cb Nithin Dabilpuram
2020-03-12 11:19 ` [dpdk-dev] [PATCH 05/11] net/octeontx2: add tm node suspend and resume cb Nithin Dabilpuram
2020-03-12 11:19 ` [dpdk-dev] [PATCH 06/11] net/octeontx2: add tm hierarchy commit callback Nithin Dabilpuram
2020-03-12 11:19 ` [dpdk-dev] [PATCH 07/11] net/octeontx2: add tm stats and shaper profile cbs Nithin Dabilpuram
2020-03-12 11:19 ` [dpdk-dev] [PATCH 08/11] net/octeontx2: add tm dynamic topology update cb Nithin Dabilpuram
2020-03-12 11:19 ` [dpdk-dev] [PATCH 09/11] net/octeontx2: add tm debug support Nithin Dabilpuram
2020-03-12 11:19 ` [dpdk-dev] [PATCH 10/11] net/octeontx2: add tx queue ratelimit callback Nithin Dabilpuram
2020-03-12 11:19 ` [dpdk-dev] [PATCH 11/11] net/octeontx2: add tm capability callbacks Nithin Dabilpuram
2020-03-13 11:08 ` [dpdk-dev] [PATCH 00/11] net/octeontx2: add traffic manager support Andrzej Ostruszka
2020-03-13 15:39 ` [dpdk-dev] [EXT] " Nithin Dabilpuram
2020-04-02 19:34 ` [dpdk-dev] [PATCH v2 " Nithin Dabilpuram
2020-04-02 19:34 ` [dpdk-dev] [PATCH v2 01/11] net/octeontx2: setup link config based on BP level Nithin Dabilpuram
2020-04-02 19:34 ` [dpdk-dev] [PATCH v2 02/11] net/octeontx2: restructure tm helper functions Nithin Dabilpuram
2020-04-02 19:34 ` [dpdk-dev] [PATCH v2 03/11] net/octeontx2: add dynamic topology update support Nithin Dabilpuram
2020-04-02 19:34 ` [dpdk-dev] [PATCH v2 04/11] net/octeontx2: add tm node add and delete cb Nithin Dabilpuram
2020-04-02 19:34 ` [dpdk-dev] [PATCH v2 05/11] net/octeontx2: add tm node suspend and resume cb Nithin Dabilpuram
2020-04-02 19:34 ` [dpdk-dev] [PATCH v2 06/11] net/octeontx2: add tm hierarchy commit callback Nithin Dabilpuram
2020-04-02 19:34 ` [dpdk-dev] [PATCH v2 07/11] net/octeontx2: add tm stats and shaper profile cbs Nithin Dabilpuram
2020-04-02 19:34 ` [dpdk-dev] [PATCH v2 08/11] net/octeontx2: add tm dynamic topology update cb Nithin Dabilpuram
2020-04-02 19:34 ` [dpdk-dev] [PATCH v2 09/11] net/octeontx2: add tm debug support Nithin Dabilpuram
2020-04-02 19:34 ` [dpdk-dev] [PATCH v2 10/11] net/octeontx2: add Tx queue ratelimit callback Nithin Dabilpuram
2020-04-02 19:34 ` [dpdk-dev] [PATCH v2 11/11] net/octeontx2: add tm capability callbacks Nithin Dabilpuram
2020-04-03 8:52 ` [dpdk-dev] [PATCH v3 00/11] net/octeontx2: add traffic manager support Nithin Dabilpuram
2020-04-03 8:52 ` [dpdk-dev] [PATCH v3 01/11] net/octeontx2: setup link config based on BP level Nithin Dabilpuram
2020-04-03 8:52 ` [dpdk-dev] [PATCH v3 02/11] net/octeontx2: restructure tm helper functions Nithin Dabilpuram
2020-04-03 8:52 ` [dpdk-dev] [PATCH v3 03/11] net/octeontx2: add dynamic topology update support Nithin Dabilpuram
2020-04-03 8:52 ` [dpdk-dev] [PATCH v3 04/11] net/octeontx2: add tm node add and delete cb Nithin Dabilpuram
2020-04-03 8:52 ` [dpdk-dev] [PATCH v3 05/11] net/octeontx2: add tm node suspend and resume cb Nithin Dabilpuram
2020-04-03 8:52 ` [dpdk-dev] [PATCH v3 06/11] net/octeontx2: add tm hierarchy commit callback Nithin Dabilpuram
2020-04-03 8:52 ` Nithin Dabilpuram [this message]
2020-04-03 8:52 ` [dpdk-dev] [PATCH v3 08/11] net/octeontx2: add tm dynamic topology update cb Nithin Dabilpuram
2020-04-03 8:52 ` [dpdk-dev] [PATCH v3 09/11] net/octeontx2: add tm debug support Nithin Dabilpuram
2020-04-03 8:52 ` [dpdk-dev] [PATCH v3 10/11] net/octeontx2: add Tx queue ratelimit callback Nithin Dabilpuram
2020-04-03 8:52 ` [dpdk-dev] [PATCH v3 11/11] net/octeontx2: add tm capability callbacks Nithin Dabilpuram
2020-04-06 5:48 ` Jerin Jacob
2020-04-06 9:14 ` [dpdk-dev] [EXT] " Nithin Dabilpuram
2020-04-06 9:31 ` Jerin Jacob
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200403085216.32684-8-nithind1988@gmail.com \
--to=nithind1988@gmail.com \
--cc=dev@dpdk.org \
--cc=jerinj@marvell.com \
--cc=kirankumark@marvell.com \
--cc=kkanas@marvell.com \
--cc=ndabilpuram@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).