From: Konstantin Ananyev <konstantin.ananyev@intel.com>
To: dev@dpdk.org
Cc: akhil.goyal@nxp.com, pablo.de.lara.guarch@intel.com,
declan.doherty@intel.com,
Konstantin Ananyev <konstantin.ananyev@intel.com>
Subject: [dpdk-dev] [PATCH v2 2/2] test/crypto: add CPU crypto mode for AESNI MB
Date: Fri, 3 Apr 2020 16:55:53 +0100 [thread overview]
Message-ID: <20200403155553.22818-3-konstantin.ananyev@intel.com> (raw)
In-Reply-To: <20200403155553.22818-1-konstantin.ananyev@intel.com>
This patch adds ability to run unit tests in cpu crypto mode
for AESNI MB cryptodev.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
---
app/test/test_cryptodev.c | 146 ++++++++++++++++++++++++++++++--------
1 file changed, 115 insertions(+), 31 deletions(-)
diff --git a/app/test/test_cryptodev.c b/app/test/test_cryptodev.c
index 7b1ef5c86..7235b701b 100644
--- a/app/test/test_cryptodev.c
+++ b/app/test/test_cryptodev.c
@@ -143,7 +143,7 @@ ceil_byte_length(uint32_t num_bits)
}
static void
-process_cpu_gmac_op(uint8_t dev_id, struct rte_crypto_op *op)
+process_cpu_aead_op(uint8_t dev_id, struct rte_crypto_op *op)
{
int32_t n, st;
void *iv;
@@ -155,8 +155,8 @@ process_cpu_gmac_op(uint8_t dev_id, struct rte_crypto_op *op)
sop = op->sym;
- n = rte_crypto_mbuf_to_vec(sop->m_src, sop->auth.data.offset,
- sop->auth.data.length, vec, RTE_DIM(vec));
+ n = rte_crypto_mbuf_to_vec(sop->m_src, sop->aead.data.offset,
+ sop->aead.data.length, vec, RTE_DIM(vec));
if (n < 0 || n != sop->m_src->nb_segs) {
op->status = RTE_CRYPTO_OP_STATUS_ERROR;
@@ -168,8 +168,8 @@ process_cpu_gmac_op(uint8_t dev_id, struct rte_crypto_op *op)
symvec.sgl = &sgl;
iv = rte_crypto_op_ctod_offset(op, void *, IV_OFFSET);
symvec.iv = &iv;
- symvec.aad = NULL;
- symvec.digest = (void **)&sop->auth.digest.data;
+ symvec.aad = (void **)&sop->aead.aad.data;
+ symvec.digest = (void **)&sop->aead.digest.data;
symvec.status = &st;
symvec.num = 1;
@@ -184,9 +184,8 @@ process_cpu_gmac_op(uint8_t dev_id, struct rte_crypto_op *op)
op->status = RTE_CRYPTO_OP_STATUS_SUCCESS;
}
-
static void
-process_cpu_aead_op(uint8_t dev_id, struct rte_crypto_op *op)
+process_cpu_crypt_auth_op(uint8_t dev_id, struct rte_crypto_op *op)
{
int32_t n, st;
void *iv;
@@ -198,8 +197,8 @@ process_cpu_aead_op(uint8_t dev_id, struct rte_crypto_op *op)
sop = op->sym;
- n = rte_crypto_mbuf_to_vec(sop->m_src, sop->aead.data.offset,
- sop->aead.data.length, vec, RTE_DIM(vec));
+ n = rte_crypto_mbuf_to_vec(sop->m_src, sop->auth.data.offset,
+ sop->auth.data.length, vec, RTE_DIM(vec));
if (n < 0 || n != sop->m_src->nb_segs) {
op->status = RTE_CRYPTO_OP_STATUS_ERROR;
@@ -212,11 +211,14 @@ process_cpu_aead_op(uint8_t dev_id, struct rte_crypto_op *op)
iv = rte_crypto_op_ctod_offset(op, void *, IV_OFFSET);
symvec.iv = &iv;
symvec.aad = (void **)&sop->aead.aad.data;
- symvec.digest = (void **)&sop->aead.digest.data;
+ symvec.digest = (void **)&sop->auth.digest.data;
symvec.status = &st;
symvec.num = 1;
ofs.raw = 0;
+ ofs.ofs.cipher.head = sop->cipher.data.offset - sop->auth.data.offset;
+ ofs.ofs.cipher.tail = (sop->auth.data.offset + sop->auth.data.length) -
+ (sop->cipher.data.offset + sop->cipher.data.length);
n = rte_cryptodev_sym_cpu_crypto_process(dev_id, sop->session, ofs,
&symvec);
@@ -1538,8 +1540,14 @@ test_AES_CBC_HMAC_SHA1_encrypt_digest(void)
sym_op->cipher.data.length = QUOTE_512_BYTES;
/* Process crypto operation */
- TEST_ASSERT_NOT_NULL(process_crypto_request(ts_params->valid_devs[0],
- ut_params->op), "failed to process sym crypto op");
+ if (gbl_action_type == RTE_SECURITY_ACTION_TYPE_CPU_CRYPTO)
+ process_cpu_crypt_auth_op(ts_params->valid_devs[0],
+ ut_params->op);
+ else
+ TEST_ASSERT_NOT_NULL(
+ process_crypto_request(ts_params->valid_devs[0],
+ ut_params->op),
+ "failed to process sym crypto op");
TEST_ASSERT_EQUAL(ut_params->op->status, RTE_CRYPTO_OP_STATUS_SUCCESS,
"crypto op processing failed");
@@ -1689,8 +1697,14 @@ test_AES_CBC_HMAC_SHA512_decrypt_perform(struct rte_cryptodev_sym_session *sess,
sym_op->cipher.data.length = QUOTE_512_BYTES;
/* Process crypto operation */
- TEST_ASSERT_NOT_NULL(process_crypto_request(ts_params->valid_devs[0],
- ut_params->op), "failed to process sym crypto op");
+ if (gbl_action_type == RTE_SECURITY_ACTION_TYPE_CPU_CRYPTO)
+ process_cpu_crypt_auth_op(ts_params->valid_devs[0],
+ ut_params->op);
+ else
+ TEST_ASSERT_NOT_NULL(
+ process_crypto_request(ts_params->valid_devs[0],
+ ut_params->op),
+ "failed to process sym crypto op");
TEST_ASSERT_EQUAL(ut_params->op->status, RTE_CRYPTO_OP_STATUS_SUCCESS,
"crypto op processing failed");
@@ -2637,8 +2651,13 @@ test_kasumi_authentication(const struct kasumi_hash_test_data *tdata)
if (retval < 0)
return retval;
- ut_params->op = process_crypto_request(ts_params->valid_devs[0],
- ut_params->op);
+ if (gbl_action_type == RTE_SECURITY_ACTION_TYPE_CPU_CRYPTO)
+ process_cpu_crypt_auth_op(ts_params->valid_devs[0],
+ ut_params->op);
+ else
+ ut_params->op = process_crypto_request(ts_params->valid_devs[0],
+ ut_params->op);
+
ut_params->obuf = ut_params->op->sym->m_src;
TEST_ASSERT_NOT_NULL(ut_params->op, "failed to retrieve obuf");
ut_params->digest = rte_pktmbuf_mtod(ut_params->obuf, uint8_t *)
@@ -8715,6 +8734,9 @@ test_stats(void)
struct rte_cryptodev *dev;
cryptodev_stats_get_t temp_pfn;
+ if (gbl_action_type == RTE_SECURITY_ACTION_TYPE_CPU_CRYPTO)
+ return -ENOTSUP;
+
/* Verify the capabilities */
struct rte_cryptodev_sym_capability_idx cap_idx;
cap_idx.type = RTE_CRYPTO_SYM_XFORM_AUTH;
@@ -8886,8 +8908,14 @@ test_MD5_HMAC_generate(const struct HMAC_MD5_vector *test_case)
if (MD5_HMAC_create_op(ut_params, test_case, &plaintext))
return TEST_FAILED;
- TEST_ASSERT_NOT_NULL(process_crypto_request(ts_params->valid_devs[0],
- ut_params->op), "failed to process sym crypto op");
+ if (gbl_action_type == RTE_SECURITY_ACTION_TYPE_CPU_CRYPTO)
+ process_cpu_crypt_auth_op(ts_params->valid_devs[0],
+ ut_params->op);
+ else
+ TEST_ASSERT_NOT_NULL(
+ process_crypto_request(ts_params->valid_devs[0],
+ ut_params->op),
+ "failed to process sym crypto op");
TEST_ASSERT_EQUAL(ut_params->op->status, RTE_CRYPTO_OP_STATUS_SUCCESS,
"crypto op processing failed");
@@ -8938,8 +8966,14 @@ test_MD5_HMAC_verify(const struct HMAC_MD5_vector *test_case)
if (MD5_HMAC_create_op(ut_params, test_case, &plaintext))
return TEST_FAILED;
- TEST_ASSERT_NOT_NULL(process_crypto_request(ts_params->valid_devs[0],
- ut_params->op), "failed to process sym crypto op");
+ if (gbl_action_type == RTE_SECURITY_ACTION_TYPE_CPU_CRYPTO)
+ process_cpu_crypt_auth_op(ts_params->valid_devs[0],
+ ut_params->op);
+ else
+ TEST_ASSERT_NOT_NULL(
+ process_crypto_request(ts_params->valid_devs[0],
+ ut_params->op),
+ "failed to process sym crypto op");
TEST_ASSERT_EQUAL(ut_params->op->status, RTE_CRYPTO_OP_STATUS_SUCCESS,
"HMAC_MD5 crypto op processing failed");
@@ -9852,7 +9886,8 @@ test_AES_GMAC_authentication(const struct gmac_test_data *tdata)
ut_params->op->sym->m_src = ut_params->ibuf;
if (gbl_action_type == RTE_SECURITY_ACTION_TYPE_CPU_CRYPTO)
- process_cpu_gmac_op(ts_params->valid_devs[0], ut_params->op);
+ process_cpu_crypt_auth_op(ts_params->valid_devs[0],
+ ut_params->op);
else
TEST_ASSERT_NOT_NULL(
process_crypto_request(ts_params->valid_devs[0],
@@ -9968,7 +10003,8 @@ test_AES_GMAC_authentication_verify(const struct gmac_test_data *tdata)
ut_params->op->sym->m_src = ut_params->ibuf;
if (gbl_action_type == RTE_SECURITY_ACTION_TYPE_CPU_CRYPTO)
- process_cpu_gmac_op(ts_params->valid_devs[0], ut_params->op);
+ process_cpu_crypt_auth_op(ts_params->valid_devs[0],
+ ut_params->op);
else
TEST_ASSERT_NOT_NULL(
process_crypto_request(ts_params->valid_devs[0],
@@ -10528,10 +10564,17 @@ test_authentication_verify_fail_when_data_corruption(
else
tag_corruption(plaintext, reference->plaintext.len);
- ut_params->op = process_crypto_request(ts_params->valid_devs[0],
+ if (gbl_action_type == RTE_SECURITY_ACTION_TYPE_CPU_CRYPTO) {
+ process_cpu_crypt_auth_op(ts_params->valid_devs[0],
ut_params->op);
-
- TEST_ASSERT_NULL(ut_params->op, "authentication not failed");
+ TEST_ASSERT_NOT_EQUAL(ut_params->op->status,
+ RTE_CRYPTO_OP_STATUS_SUCCESS,
+ "authentication not failed");
+ } else {
+ ut_params->op = process_crypto_request(ts_params->valid_devs[0],
+ ut_params->op);
+ TEST_ASSERT_NULL(ut_params->op, "authentication not failed");
+ }
return 0;
}
@@ -10593,7 +10636,8 @@ test_authentication_verify_GMAC_fail_when_corruption(
tag_corruption(plaintext, reference->aad.len);
if (gbl_action_type == RTE_SECURITY_ACTION_TYPE_CPU_CRYPTO) {
- process_cpu_gmac_op(ts_params->valid_devs[0], ut_params->op);
+ process_cpu_crypt_auth_op(ts_params->valid_devs[0],
+ ut_params->op);
TEST_ASSERT_NOT_EQUAL(ut_params->op->status,
RTE_CRYPTO_OP_STATUS_SUCCESS,
"authentication not failed");
@@ -10666,10 +10710,17 @@ test_authenticated_decryption_fail_when_corruption(
else
tag_corruption(ciphertext, reference->ciphertext.len);
- ut_params->op = process_crypto_request(ts_params->valid_devs[0],
+ if (gbl_action_type == RTE_SECURITY_ACTION_TYPE_CPU_CRYPTO) {
+ process_cpu_crypt_auth_op(ts_params->valid_devs[0],
ut_params->op);
-
- TEST_ASSERT_NULL(ut_params->op, "authentication not failed");
+ TEST_ASSERT_NOT_EQUAL(ut_params->op->status,
+ RTE_CRYPTO_OP_STATUS_SUCCESS,
+ "authentication not failed");
+ } else {
+ ut_params->op = process_crypto_request(ts_params->valid_devs[0],
+ ut_params->op);
+ TEST_ASSERT_NULL(ut_params->op, "authentication not failed");
+ }
return 0;
}
@@ -10757,8 +10808,12 @@ test_authenticated_encryt_with_esn(
if (retval < 0)
return retval;
- ut_params->op = process_crypto_request(ts_params->valid_devs[0],
+ if (gbl_action_type == RTE_SECURITY_ACTION_TYPE_CPU_CRYPTO)
+ process_cpu_crypt_auth_op(ts_params->valid_devs[0],
ut_params->op);
+ else
+ ut_params->op = process_crypto_request(
+ ts_params->valid_devs[0], ut_params->op);
TEST_ASSERT_NOT_NULL(ut_params->op, "no crypto operation returned");
@@ -10873,7 +10928,11 @@ test_authenticated_decrypt_with_esn(
if (retval < 0)
return retval;
- ut_params->op = process_crypto_request(ts_params->valid_devs[0],
+ if (gbl_action_type == RTE_SECURITY_ACTION_TYPE_CPU_CRYPTO)
+ process_cpu_crypt_auth_op(ts_params->valid_devs[0],
+ ut_params->op);
+ else
+ ut_params->op = process_crypto_request(ts_params->valid_devs[0],
ut_params->op);
TEST_ASSERT_NOT_NULL(ut_params->op, "failed crypto process");
@@ -13377,6 +13436,29 @@ test_cryptodev_aesni_mb(void /*argv __rte_unused, int argc __rte_unused*/)
return unit_test_suite_runner(&cryptodev_testsuite);
}
+static int
+test_cryptodev_cpu_aesni_mb(void)
+{
+ int32_t rc;
+ enum rte_security_session_action_type at;
+
+ gbl_driver_id = rte_cryptodev_driver_id_get(
+ RTE_STR(CRYPTODEV_NAME_AESNI_MB_PMD));
+
+ if (gbl_driver_id == -1) {
+ RTE_LOG(ERR, USER1, "AESNI MB PMD must be loaded. Check if "
+ "CONFIG_RTE_LIBRTE_PMD_AESNI_MB is enabled "
+ "in config file to run this testsuite.\n");
+ return TEST_SKIPPED;
+ }
+
+ at = gbl_action_type;
+ gbl_action_type = RTE_SECURITY_ACTION_TYPE_CPU_CRYPTO;
+ rc = unit_test_suite_runner(&cryptodev_testsuite);
+ gbl_action_type = at;
+ return rc;
+}
+
static int
test_cryptodev_openssl(void)
{
@@ -13668,6 +13750,8 @@ test_cryptodev_nitrox(void)
REGISTER_TEST_COMMAND(cryptodev_qat_autotest, test_cryptodev_qat);
REGISTER_TEST_COMMAND(cryptodev_aesni_mb_autotest, test_cryptodev_aesni_mb);
+REGISTER_TEST_COMMAND(cryptodev_cpu_aesni_mb_autotest,
+ test_cryptodev_cpu_aesni_mb);
REGISTER_TEST_COMMAND(cryptodev_openssl_autotest, test_cryptodev_openssl);
REGISTER_TEST_COMMAND(cryptodev_aesni_gcm_autotest, test_cryptodev_aesni_gcm);
REGISTER_TEST_COMMAND(cryptodev_cpu_aesni_gcm_autotest,
--
2.17.1
next prev parent reply other threads:[~2020-04-03 15:56 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-16 13:21 [dpdk-dev] [PATCH 0/2] support CPU crypto for AESNI MB PMD Konstantin Ananyev
2020-03-16 13:21 ` [dpdk-dev] [PATCH 1/2] crypto/aesni_mb: support CPU crypto Konstantin Ananyev
2020-03-16 13:21 ` [dpdk-dev] [PATCH 2/2] test/crypto: add CPU crypto mode for AESNI MB Konstantin Ananyev
2020-04-01 14:18 ` [dpdk-dev] [PATCH 0/2] support CPU crypto for AESNI MB PMD Akhil Goyal
2020-04-01 15:09 ` Ananyev, Konstantin
2020-04-03 15:55 ` [dpdk-dev] [PATCH v2 " Konstantin Ananyev
2020-04-03 15:55 ` [dpdk-dev] [PATCH v2 1/2] crypto/aesni_mb: support CPU crypto Konstantin Ananyev
2020-04-15 9:08 ` De Lara Guarch, Pablo
2020-04-15 9:14 ` De Lara Guarch, Pablo
2020-04-15 9:52 ` Ananyev, Konstantin
2020-04-03 15:55 ` Konstantin Ananyev [this message]
2020-04-15 9:13 ` [dpdk-dev] [PATCH v2 2/2] test/crypto: add CPU crypto mode for AESNI MB De Lara Guarch, Pablo
2020-04-15 18:25 ` Akhil Goyal
2020-04-03 16:26 ` [dpdk-dev] [PATCH v2 0/2] support CPU crypto for AESNI MB PMD Akhil Goyal
2020-04-17 15:03 ` [dpdk-dev] [PATCH v3 " Konstantin Ananyev
2020-04-17 15:03 ` [dpdk-dev] [PATCH v3 1/2] crypto/aesni_mb: support CPU crypto Konstantin Ananyev
2020-04-17 15:03 ` [dpdk-dev] [PATCH v3 2/2] test/crypto: add CPU crypto mode for AESNI MB Konstantin Ananyev
2020-04-17 20:57 ` [dpdk-dev] [PATCH v3 0/2] support CPU crypto for AESNI MB PMD Akhil Goyal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200403155553.22818-3-konstantin.ananyev@intel.com \
--to=konstantin.ananyev@intel.com \
--cc=akhil.goyal@nxp.com \
--cc=declan.doherty@intel.com \
--cc=dev@dpdk.org \
--cc=pablo.de.lara.guarch@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).