From: asomalap@amd.com
To: dev@dpdk.org
Cc: Ravi1.Kumar@amd.com
Subject: [dpdk-dev] [PATCH v1] net/axgbe: support sfp module EEPROM
Date: Wed, 8 Apr 2020 12:38:03 +0530 [thread overview]
Message-ID: <20200408070803.32051-1-asomalap@amd.com> (raw)
From: Amaranath Somalapuram <Amaranath.Somalapuram@amd.com>
Adding API for get_module_eeprom and get_module_info.
Signed-off-by: Amaranath Somalapuram <Amaranath.Somalapuram@amd.com>
---
drivers/net/axgbe/axgbe_ethdev.c | 2 +
drivers/net/axgbe/axgbe_phy.h | 4 ++
drivers/net/axgbe/axgbe_phy_impl.c | 107 +++++++++++++++++++++++++++++
3 files changed, 113 insertions(+)
diff --git a/drivers/net/axgbe/axgbe_ethdev.c b/drivers/net/axgbe/axgbe_ethdev.c
index 867058845..ea2f9bba1 100644
--- a/drivers/net/axgbe/axgbe_ethdev.c
+++ b/drivers/net/axgbe/axgbe_ethdev.c
@@ -214,6 +214,8 @@ static const struct eth_dev_ops axgbe_eth_dev_ops = {
.dev_supported_ptypes_get = axgbe_dev_supported_ptypes_get,
.rx_descriptor_status = axgbe_dev_rx_descriptor_status,
.tx_descriptor_status = axgbe_dev_tx_descriptor_status,
+ .get_module_info = axgbe_get_module_info,
+ .get_module_eeprom = axgbe_get_module_eeprom,
};
static int axgbe_phy_reset(struct axgbe_port *pdata)
diff --git a/drivers/net/axgbe/axgbe_phy.h b/drivers/net/axgbe/axgbe_phy.h
index 77ee20a31..d9d7fde41 100644
--- a/drivers/net/axgbe/axgbe_phy.h
+++ b/drivers/net/axgbe/axgbe_phy.h
@@ -188,5 +188,9 @@
#define DUPLEX_FULL 0x01
#define DUPLEX_UNKNOWN 0xff
+int axgbe_get_module_info(struct rte_eth_dev *dev,
+ struct rte_eth_dev_module_info *modinfo);
+int axgbe_get_module_eeprom(struct rte_eth_dev *dev,
+ struct rte_dev_eeprom_info *info);
#endif
/* PHY */
diff --git a/drivers/net/axgbe/axgbe_phy_impl.c b/drivers/net/axgbe/axgbe_phy_impl.c
index 02236ec19..53716071f 100644
--- a/drivers/net/axgbe/axgbe_phy_impl.c
+++ b/drivers/net/axgbe/axgbe_phy_impl.c
@@ -141,12 +141,18 @@ enum axgbe_sfp_speed {
#define AXGBE_SFP_EXTD_CC 31
+#define AXGBE_SFP_EEPROM_PAGE_SIZE 256
+
struct axgbe_sfp_eeprom {
u8 base[64];
u8 extd[32];
u8 vendor[32];
};
+struct axgbe_sfp_eeprom_module {
+ u8 base[256];
+};
+
#define AXGBE_BEL_FUSE_VENDOR "BEL-FUSE"
#define AXGBE_BEL_FUSE_PARTNO "1GBT-SFP06"
@@ -734,6 +740,106 @@ static int axgbe_phy_sfp_read_eeprom(struct axgbe_port *pdata)
return ret;
}
+int axgbe_get_module_info(struct rte_eth_dev *dev,
+ struct rte_eth_dev_module_info *modinfo)
+{
+ struct axgbe_port *pdata = dev->data->dev_private;
+ struct axgbe_sfp_eeprom sfp_eeprom;
+ uint8_t eeprom_addr;
+ int ret;
+
+ ret = axgbe_phy_get_comm_ownership(pdata);
+
+ if (ret)
+ return -EIO;
+
+ ret = axgbe_phy_sfp_get_mux(pdata);
+
+ if (ret) {
+ PMD_DRV_LOG(ERR, "I2C error setting SFP MUX\n");
+ return ret;
+ }
+
+ eeprom_addr = 0;
+ ret = axgbe_phy_i2c_read(pdata, AXGBE_SFP_SERIAL_ID_ADDRESS,
+ &eeprom_addr, sizeof(eeprom_addr),
+ &sfp_eeprom, sizeof(sfp_eeprom));
+
+ if (ret) {
+ PMD_DRV_LOG(ERR, "I2C error reading SFP EEPROM\n");
+ goto put;
+ }
+
+ if (sfp_eeprom.extd[AXGBE_SFP_EXTD_SFF_8472] != 0xff) {
+ if (sfp_eeprom.extd[AXGBE_SFP_EXTD_SFF_8472] == 0) {
+ modinfo->type = RTE_ETH_MODULE_SFF_8079;
+ modinfo->eeprom_len = RTE_ETH_MODULE_SFF_8079_LEN;
+ } else {
+ modinfo->type = RTE_ETH_MODULE_SFF_8472;
+ modinfo->eeprom_len = RTE_ETH_MODULE_SFF_8472_LEN;
+ }
+ }
+
+
+put:
+ axgbe_phy_sfp_put_mux(pdata);
+ axgbe_phy_put_comm_ownership(pdata);
+ return 0;
+}
+
+int axgbe_get_module_eeprom(struct rte_eth_dev *dev,
+ struct rte_dev_eeprom_info *info)
+{
+ struct axgbe_port *pdata = dev->data->dev_private;
+ struct axgbe_sfp_eeprom_module sfp_eeprom;
+ uint8_t eeprom_addr;
+ uint8_t *data;
+ uint32_t i;
+ int ret;
+
+ ret = axgbe_phy_get_comm_ownership(pdata);
+
+ if (ret)
+ return -EIO;
+
+ if (!info || !info->length || !info->data)
+ return -EINVAL;
+
+ ret = axgbe_phy_sfp_get_mux(pdata);
+ if (ret) {
+ PMD_DRV_LOG(ERR, "I2C error setting SFP MUX\n");
+ return ret;
+ }
+
+ eeprom_addr = 0;
+ ret = axgbe_phy_i2c_read(pdata, AXGBE_SFP_SERIAL_ID_ADDRESS,
+ &eeprom_addr, sizeof(eeprom_addr),
+ &sfp_eeprom, sizeof(sfp_eeprom));
+ if (ret) {
+ PMD_DRV_LOG(ERR, "I2C error reading SFP EEPROM\n");
+ goto put;
+ }
+ data = info->data;
+
+ /* for AXGBE_SFP_SERIAL_ID_ADDRESS */
+ for (i = 0; i < AXGBE_SFP_EEPROM_PAGE_SIZE; i++)
+ data[i] = sfp_eeprom.base[i];
+
+ eeprom_addr = 0;
+ ret = axgbe_phy_i2c_read(pdata, AXGBE_SFP_DIAG_INFO_ADDRESS,
+ &eeprom_addr, sizeof(eeprom_addr),
+ &sfp_eeprom, sizeof(sfp_eeprom));
+
+ /* for AXGBE_SFP_DIAG_INFO_ADDRESS */
+ for (i = 0; i < info->length - AXGBE_SFP_EEPROM_PAGE_SIZE; i++)
+ data[i + AXGBE_SFP_EEPROM_PAGE_SIZE] = sfp_eeprom.base[i];
+
+put:
+ axgbe_phy_sfp_put_mux(pdata);
+ axgbe_phy_put_comm_ownership(pdata);
+ return 0;
+}
+
static void axgbe_phy_sfp_signals(struct axgbe_port *pdata)
{
struct axgbe_phy_data *phy_data = pdata->phy_data;
@@ -741,6 +847,7 @@ static void axgbe_phy_sfp_signals(struct axgbe_port *pdata)
u8 gpio_reg, gpio_ports[2];
int ret;
+
/* Read the input port registers */
gpio_reg = 0;
ret = axgbe_phy_i2c_read(pdata, phy_data->sfp_gpio_address,
--
2.17.1
next reply other threads:[~2020-04-08 7:08 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-08 7:08 asomalap [this message]
2020-04-08 8:30 ` Somalapuram, Amaranath
2020-04-09 9:42 ` Kumar, Ravi1
2020-04-09 13:16 ` Ferruh Yigit
2020-05-14 13:43 asomalap
2020-05-14 16:35 ` Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200408070803.32051-1-asomalap@amd.com \
--to=asomalap@amd.com \
--cc=Ravi1.Kumar@amd.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).