From: alvinx.zhang@intel.com
To: dev@dpdk.org
Cc: xiaolong.ye@intel.com, Alvin Zhang <alvinx.zhang@intel.com>
Subject: [dpdk-dev] [PATCH v3 03/11] net/igc: implement device base ops
Date: Mon, 13 Apr 2020 14:30:29 +0800 [thread overview]
Message-ID: <20200413063037.13728-4-alvinx.zhang@intel.com> (raw)
In-Reply-To: <20200413063037.13728-1-alvinx.zhang@intel.com>
From: Alvin Zhang <alvinx.zhang@intel.com>
Bellow ops are implemented:
dev_configure
dev_start
dev_stop
dev_close
dev_reset
dev_set_link_up
dev_set_link_down
link_update
fw_version_get
dev_led_on
dev_led_off
Signed-off-by: Alvin Zhang <alvinx.zhang@intel.com>
v2: Modify codes according to comments.
v3: Modify codes according to comments.
---
doc/guides/nics/features/igc.ini | 5 +
drivers/net/igc/igc_ethdev.c | 644 ++++++++++++++++++++++++++++++++++++++-
drivers/net/igc/igc_ethdev.h | 35 +++
3 files changed, 674 insertions(+), 10 deletions(-)
diff --git a/doc/guides/nics/features/igc.ini b/doc/guides/nics/features/igc.ini
index ad75cc4..0fbdf7c 100644
--- a/doc/guides/nics/features/igc.ini
+++ b/doc/guides/nics/features/igc.ini
@@ -3,6 +3,11 @@
; Refer to default.ini for the full list of available PMD features.
;
[Features]
+Speed capabilities = Y
+Link status = Y
+Link status event = Y
+FW version = Y
+LED = Y
Linux UIO = Y
Linux VFIO = Y
x86-64 = Y
diff --git a/drivers/net/igc/igc_ethdev.c b/drivers/net/igc/igc_ethdev.c
index 3a004a4..f82dfb5 100644
--- a/drivers/net/igc/igc_ethdev.c
+++ b/drivers/net/igc/igc_ethdev.c
@@ -3,6 +3,7 @@
*/
#include <stdint.h>
+#include <string.h>
#include <rte_pci.h>
#include <rte_bus_pci.h>
@@ -15,7 +16,34 @@
#define IGC_INTEL_VENDOR_ID 0x8086
+/*
+ * The overhead from MTU to max frame size.
+ * Considering VLAN so tag needs to be counted.
+ */
+#define IGC_ETH_OVERHEAD (RTE_ETHER_HDR_LEN + \
+ RTE_ETHER_CRC_LEN + VLAN_TAG_SIZE)
+
#define IGC_FC_PAUSE_TIME 0x0680
+#define IGC_LINK_UPDATE_CHECK_TIMEOUT 90 /* 9s */
+#define IGC_LINK_UPDATE_CHECK_INTERVAL 100 /* ms */
+
+#define IGC_MISC_VEC_ID RTE_INTR_VEC_ZERO_OFFSET
+#define IGC_RX_VEC_START RTE_INTR_VEC_RXTX_OFFSET
+#define IGC_MSIX_OTHER_INTR_VEC 0 /* MSI-X other interrupt vector */
+#define IGC_FLAG_NEED_LINK_UPDATE (1u << 0) /* need update link */
+
+#define IGC_DEFAULT_RX_FREE_THRESH 32
+
+#define IGC_DEFAULT_RX_PTHRESH 8
+#define IGC_DEFAULT_RX_HTHRESH 8
+#define IGC_DEFAULT_RX_WTHRESH 4
+
+#define IGC_DEFAULT_TX_PTHRESH 8
+#define IGC_DEFAULT_TX_HTHRESH 1
+#define IGC_DEFAULT_TX_WTHRESH 16
+
+/* MSI-X other interrupt vector */
+#define IGC_MSIX_OTHER_INTR_VEC 0
static const struct rte_pci_id pci_id_igc_map[] = {
{ RTE_PCI_DEVICE(IGC_INTEL_VENDOR_ID, IGC_DEV_ID_I225_LM) },
@@ -29,12 +57,20 @@
static int eth_igc_link_update(struct rte_eth_dev *dev, int wait_to_complete);
static void eth_igc_stop(struct rte_eth_dev *dev);
static int eth_igc_start(struct rte_eth_dev *dev);
+static int eth_igc_set_link_up(struct rte_eth_dev *dev);
+static int eth_igc_set_link_down(struct rte_eth_dev *dev);
static void eth_igc_close(struct rte_eth_dev *dev);
static int eth_igc_reset(struct rte_eth_dev *dev);
static int eth_igc_promiscuous_enable(struct rte_eth_dev *dev);
static int eth_igc_promiscuous_disable(struct rte_eth_dev *dev);
+static int eth_igc_fw_version_get(struct rte_eth_dev *dev,
+ char *fw_version, size_t fw_size);
static int eth_igc_infos_get(struct rte_eth_dev *dev,
struct rte_eth_dev_info *dev_info);
+static int eth_igc_led_on(struct rte_eth_dev *dev);
+static int eth_igc_led_off(struct rte_eth_dev *dev);
+static void eth_igc_tx_queue_release(void *txq);
+static void eth_igc_rx_queue_release(void *rxq);
static int
eth_igc_rx_queue_setup(struct rte_eth_dev *dev, uint16_t rx_queue_id,
uint16_t nb_rx_desc, unsigned int socket_id,
@@ -52,35 +88,394 @@ static int eth_igc_infos_get(struct rte_eth_dev *dev,
.dev_start = eth_igc_start,
.dev_close = eth_igc_close,
.dev_reset = eth_igc_reset,
+ .dev_set_link_up = eth_igc_set_link_up,
+ .dev_set_link_down = eth_igc_set_link_down,
.promiscuous_enable = eth_igc_promiscuous_enable,
.promiscuous_disable = eth_igc_promiscuous_disable,
+
+ .fw_version_get = eth_igc_fw_version_get,
.dev_infos_get = eth_igc_infos_get,
+ .dev_led_on = eth_igc_led_on,
+ .dev_led_off = eth_igc_led_off,
+
.rx_queue_setup = eth_igc_rx_queue_setup,
+ .rx_queue_release = eth_igc_rx_queue_release,
.tx_queue_setup = eth_igc_tx_queue_setup,
+ .tx_queue_release = eth_igc_tx_queue_release,
};
+/*
+ * multipe queue mode checking
+ */
+static int
+igc_check_mq_mode(struct rte_eth_dev *dev)
+{
+ enum rte_eth_rx_mq_mode rx_mq_mode = dev->data->dev_conf.rxmode.mq_mode;
+ enum rte_eth_tx_mq_mode tx_mq_mode = dev->data->dev_conf.txmode.mq_mode;
+
+ if (RTE_ETH_DEV_SRIOV(dev).active != 0) {
+ PMD_INIT_LOG(ERR, "SRIOV is not supported.");
+ return -EINVAL;
+ }
+
+ if (rx_mq_mode != ETH_MQ_RX_NONE &&
+ rx_mq_mode != ETH_MQ_RX_RSS) {
+ /* RSS together with VMDq not supported*/
+ PMD_INIT_LOG(ERR, "RX mode %d is not supported.",
+ rx_mq_mode);
+ return -EINVAL;
+ }
+
+ /* To no break software that set invalid mode, only display
+ * warning if invalid mode is used.
+ */
+ if (tx_mq_mode != ETH_MQ_TX_NONE)
+ PMD_INIT_LOG(WARNING, "TX mode %d is not supported."
+ " Due to txmode is meaningless in this driver,"
+ " just ignore.", tx_mq_mode);
+
+ return 0;
+}
+
static int
eth_igc_configure(struct rte_eth_dev *dev)
{
+ struct igc_interrupt *intr = IGC_DEV_PRIVATE_INTR(dev);
+ int ret;
+
PMD_INIT_FUNC_TRACE();
- RTE_SET_USED(dev);
+
+ ret = igc_check_mq_mode(dev);
+ if (ret != 0)
+ return ret;
+
+ intr->flags |= IGC_FLAG_NEED_LINK_UPDATE;
return 0;
}
static int
-eth_igc_link_update(struct rte_eth_dev *dev, int wait_to_complete)
+eth_igc_set_link_up(struct rte_eth_dev *dev)
{
- PMD_INIT_FUNC_TRACE();
- RTE_SET_USED(dev);
- RTE_SET_USED(wait_to_complete);
+ struct igc_hw *hw = IGC_DEV_PRIVATE_HW(dev);
+
+ if (hw->phy.media_type == igc_media_type_copper)
+ igc_power_up_phy(hw);
+ else
+ igc_power_up_fiber_serdes_link(hw);
+ return 0;
+}
+
+static int
+eth_igc_set_link_down(struct rte_eth_dev *dev)
+{
+ struct igc_hw *hw = IGC_DEV_PRIVATE_HW(dev);
+
+ if (hw->phy.media_type == igc_media_type_copper)
+ igc_power_down_phy(hw);
+ else
+ igc_shutdown_fiber_serdes_link(hw);
return 0;
}
+/*
+ * disable other interrupt
+ */
+static void
+igc_intr_other_disable(struct rte_eth_dev *dev)
+{
+ struct igc_hw *hw = IGC_DEV_PRIVATE_HW(dev);
+ struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(dev);
+ struct rte_intr_handle *intr_handle = &pci_dev->intr_handle;
+
+ if (rte_intr_allow_others(intr_handle) &&
+ dev->data->dev_conf.intr_conf.lsc) {
+ IGC_WRITE_REG(hw, IGC_EIMC, 1u << IGC_MSIX_OTHER_INTR_VEC);
+ }
+
+ IGC_WRITE_REG(hw, IGC_IMC, ~0);
+ IGC_WRITE_FLUSH(hw);
+}
+
+/*
+ * enable other interrupt
+ */
+static inline void
+igc_intr_other_enable(struct rte_eth_dev *dev)
+{
+ struct igc_interrupt *intr = IGC_DEV_PRIVATE_INTR(dev);
+ struct igc_hw *hw = IGC_DEV_PRIVATE_HW(dev);
+ struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(dev);
+ struct rte_intr_handle *intr_handle = &pci_dev->intr_handle;
+
+ if (rte_intr_allow_others(intr_handle) &&
+ dev->data->dev_conf.intr_conf.lsc) {
+ IGC_WRITE_REG(hw, IGC_EIMS, 1u << IGC_MSIX_OTHER_INTR_VEC);
+ }
+
+ IGC_WRITE_REG(hw, IGC_IMS, intr->mask);
+ IGC_WRITE_FLUSH(hw);
+}
+
+/*
+ * It reads ICR and gets interrupt causes, check it and set a bit flag
+ * to update link status.
+ */
+static void
+eth_igc_interrupt_get_status(struct rte_eth_dev *dev)
+{
+ uint32_t icr;
+ struct igc_hw *hw = IGC_DEV_PRIVATE_HW(dev);
+ struct igc_interrupt *intr = IGC_DEV_PRIVATE_INTR(dev);
+
+ /* read-on-clear nic registers here */
+ icr = IGC_READ_REG(hw, IGC_ICR);
+
+ intr->flags = 0;
+ if (icr & IGC_ICR_LSC)
+ intr->flags |= IGC_FLAG_NEED_LINK_UPDATE;
+}
+
+/* return 0 means link status changed, -1 means not changed */
+static int
+eth_igc_link_update(struct rte_eth_dev *dev, int wait_to_complete)
+{
+ struct igc_hw *hw = IGC_DEV_PRIVATE_HW(dev);
+ struct rte_eth_link link;
+ int link_check, count;
+
+ link_check = 0;
+ hw->mac.get_link_status = 1;
+
+ /* possible wait-to-complete in up to 9 seconds */
+ for (count = 0; count < IGC_LINK_UPDATE_CHECK_TIMEOUT; count++) {
+ /* Read the real link status */
+ switch (hw->phy.media_type) {
+ case igc_media_type_copper:
+ /* Do the work to read phy */
+ igc_check_for_link(hw);
+ link_check = !hw->mac.get_link_status;
+ break;
+
+ case igc_media_type_fiber:
+ igc_check_for_link(hw);
+ link_check = (IGC_READ_REG(hw, IGC_STATUS) &
+ IGC_STATUS_LU);
+ break;
+
+ case igc_media_type_internal_serdes:
+ igc_check_for_link(hw);
+ link_check = hw->mac.serdes_has_link;
+ break;
+
+ default:
+ break;
+ }
+ if (link_check || wait_to_complete == 0)
+ break;
+ rte_delay_ms(IGC_LINK_UPDATE_CHECK_INTERVAL);
+ }
+ memset(&link, 0, sizeof(link));
+
+ /* Now we check if a transition has happened */
+ if (link_check) {
+ uint16_t duplex, speed;
+ hw->mac.ops.get_link_up_info(hw, &speed, &duplex);
+ link.link_duplex = (duplex == FULL_DUPLEX) ?
+ ETH_LINK_FULL_DUPLEX :
+ ETH_LINK_HALF_DUPLEX;
+ link.link_speed = speed;
+ link.link_status = ETH_LINK_UP;
+ link.link_autoneg = !(dev->data->dev_conf.link_speeds &
+ ETH_LINK_SPEED_FIXED);
+
+ if (speed == SPEED_2500) {
+ uint32_t tipg = IGC_READ_REG(hw, IGC_TIPG);
+ if ((tipg & IGC_TIPG_IPGT_MASK) != 0x0b) {
+ tipg &= ~IGC_TIPG_IPGT_MASK;
+ tipg |= 0x0b;
+ IGC_WRITE_REG(hw, IGC_TIPG, tipg);
+ }
+ }
+ } else {
+ link.link_speed = 0;
+ link.link_duplex = ETH_LINK_HALF_DUPLEX;
+ link.link_status = ETH_LINK_DOWN;
+ link.link_autoneg = ETH_LINK_FIXED;
+ }
+
+ return rte_eth_linkstatus_set(dev, &link);
+}
+
+/*
+ * It executes link_update after knowing an interrupt is present.
+ */
+static void
+eth_igc_interrupt_action(struct rte_eth_dev *dev)
+{
+ struct igc_interrupt *intr = IGC_DEV_PRIVATE_INTR(dev);
+ struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(dev);
+ struct rte_eth_link link;
+ int ret;
+
+ if (intr->flags & IGC_FLAG_NEED_LINK_UPDATE) {
+ intr->flags &= ~IGC_FLAG_NEED_LINK_UPDATE;
+
+ /* set get_link_status to check register later */
+ ret = eth_igc_link_update(dev, 0);
+
+ /* check if link has changed */
+ if (ret < 0)
+ return;
+
+ rte_eth_linkstatus_get(dev, &link);
+ if (link.link_status)
+ PMD_DRV_LOG(INFO,
+ " Port %d: Link Up - speed %u Mbps - %s",
+ dev->data->port_id,
+ (unsigned int)link.link_speed,
+ link.link_duplex == ETH_LINK_FULL_DUPLEX ?
+ "full-duplex" : "half-duplex");
+ else
+ PMD_DRV_LOG(INFO, " Port %d: Link Down",
+ dev->data->port_id);
+
+ PMD_DRV_LOG(DEBUG, "PCI Address: %04d:%02d:%02d:%d",
+ pci_dev->addr.domain,
+ pci_dev->addr.bus,
+ pci_dev->addr.devid,
+ pci_dev->addr.function);
+ _rte_eth_dev_callback_process(dev, RTE_ETH_EVENT_INTR_LSC,
+ NULL);
+ }
+}
+
+/*
+ * Interrupt handler which shall be registered at first.
+ *
+ * @handle
+ * Pointer to interrupt handle.
+ * @param
+ * The address of parameter (struct rte_eth_dev *) regsitered before.
+ */
+static void
+eth_igc_interrupt_handler(void *param)
+{
+ struct rte_eth_dev *dev = (struct rte_eth_dev *)param;
+
+ eth_igc_interrupt_get_status(dev);
+ eth_igc_interrupt_action(dev);
+}
+
+/*
+ * This routine disables all traffic on the adapter by issuing a
+ * global reset on the MAC.
+ */
static void
eth_igc_stop(struct rte_eth_dev *dev)
{
- PMD_INIT_FUNC_TRACE();
- RTE_SET_USED(dev);
+ struct igc_adapter *adapter = IGC_DEV_PRIVATE(dev);
+ struct igc_hw *hw = IGC_DEV_PRIVATE_HW(dev);
+ struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(dev);
+ struct rte_intr_handle *intr_handle = &pci_dev->intr_handle;
+ struct rte_eth_link link;
+
+ adapter->stopped = 1;
+
+ /* disable all MSI-X interrupts */
+ IGC_WRITE_REG(hw, IGC_EIMC, 0x1f);
+ IGC_WRITE_FLUSH(hw);
+
+ /* clear all MSI-X interrupts */
+ IGC_WRITE_REG(hw, IGC_EICR, 0x1f);
+
+ igc_intr_other_disable(dev);
+
+ /* disable intr eventfd mapping */
+ rte_intr_disable(intr_handle);
+
+ igc_reset_hw(hw);
+
+ /* disable all wake up */
+ IGC_WRITE_REG(hw, IGC_WUC, 0);
+
+ /* Set bit for Go Link disconnect */
+ igc_read_reg_check_set_bits(hw, IGC_82580_PHY_POWER_MGMT,
+ IGC_82580_PM_GO_LINKD);
+
+ /* Power down the phy. Needed to make the link go Down */
+ eth_igc_set_link_down(dev);
+
+ /* clear the recorded link status */
+ memset(&link, 0, sizeof(link));
+ rte_eth_linkstatus_set(dev, &link);
+
+ if (!rte_intr_allow_others(intr_handle))
+ /* resume to the default handler */
+ rte_intr_callback_register(intr_handle,
+ eth_igc_interrupt_handler,
+ (void *)dev);
+
+ /* Clean datapath event and queue/vec mapping */
+ rte_intr_efd_disable(intr_handle);
+}
+
+/* Sets up the hardware to generate MSI-X interrupts properly
+ * @hw
+ * board private structure
+ */
+static void
+igc_configure_msix_intr(struct rte_eth_dev *dev)
+{
+ struct igc_hw *hw = IGC_DEV_PRIVATE_HW(dev);
+ struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(dev);
+ struct rte_intr_handle *intr_handle = &pci_dev->intr_handle;
+
+ uint32_t intr_mask;
+
+ /* won't configure msix register if no mapping is done
+ * between intr vector and event fd
+ */
+ if (!rte_intr_dp_is_en(intr_handle) ||
+ !dev->data->dev_conf.intr_conf.lsc)
+ return;
+
+ /* turn on MSI-X capability first */
+ IGC_WRITE_REG(hw, IGC_GPIE, IGC_GPIE_MSIX_MODE |
+ IGC_GPIE_PBA | IGC_GPIE_EIAME |
+ IGC_GPIE_NSICR);
+
+ intr_mask = (1u << IGC_MSIX_OTHER_INTR_VEC);
+
+ /* enable msix auto-clear */
+ igc_read_reg_check_set_bits(hw, IGC_EIAC, intr_mask);
+
+ /* set other cause interrupt vector */
+ igc_read_reg_check_set_bits(hw, IGC_IVAR_MISC,
+ (uint32_t)(IGC_MSIX_OTHER_INTR_VEC | IGC_IVAR_VALID) << 8);
+
+ /* enable auto-mask */
+ igc_read_reg_check_set_bits(hw, IGC_EIAM, intr_mask);
+
+ IGC_WRITE_FLUSH(hw);
+}
+
+/**
+ * It enables the interrupt mask and then enable the interrupt.
+ *
+ * @dev
+ * Pointer to struct rte_eth_dev.
+ * @on
+ * Enable or Disable
+ */
+static void
+igc_lsc_interrupt_setup(struct rte_eth_dev *dev, uint8_t on)
+{
+ struct igc_interrupt *intr = IGC_DEV_PRIVATE_INTR(dev);
+
+ if (on)
+ intr->mask |= IGC_ICR_LSC;
+ else
+ intr->mask &= ~IGC_ICR_LSC;
}
/*
@@ -170,9 +565,134 @@ static int eth_igc_infos_get(struct rte_eth_dev *dev,
static int
eth_igc_start(struct rte_eth_dev *dev)
{
+ struct igc_hw *hw = IGC_DEV_PRIVATE_HW(dev);
+ struct igc_adapter *adapter = IGC_DEV_PRIVATE(dev);
+ struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(dev);
+ struct rte_intr_handle *intr_handle = &pci_dev->intr_handle;
+ uint32_t *speeds;
+ int num_speeds;
+ bool autoneg;
+
PMD_INIT_FUNC_TRACE();
- RTE_SET_USED(dev);
+
+ /* disable all MSI-X interrupts */
+ IGC_WRITE_REG(hw, IGC_EIMC, 0x1f);
+ IGC_WRITE_FLUSH(hw);
+
+ /* clear all MSI-X interrupts */
+ IGC_WRITE_REG(hw, IGC_EICR, 0x1f);
+
+ /* disable uio/vfio intr/eventfd mapping */
+ if (!adapter->stopped)
+ rte_intr_disable(intr_handle);
+
+ /* Power up the phy. Needed to make the link go Up */
+ eth_igc_set_link_up(dev);
+
+ /* Put the address into the Receive Address Array */
+ igc_rar_set(hw, hw->mac.addr, 0);
+
+ /* Initialize the hardware */
+ if (igc_hardware_init(hw)) {
+ PMD_DRV_LOG(ERR, "Unable to initialize the hardware");
+ return -EIO;
+ }
+ adapter->stopped = 0;
+
+ /* confiugre msix for rx interrupt */
+ igc_configure_msix_intr(dev);
+
+ igc_clear_hw_cntrs_base_generic(hw);
+
+ /* Setup link speed and duplex */
+ speeds = &dev->data->dev_conf.link_speeds;
+ if (*speeds == ETH_LINK_SPEED_AUTONEG) {
+ hw->phy.autoneg_advertised = IGC_ALL_SPEED_DUPLEX_2500;
+ hw->mac.autoneg = 1;
+ } else {
+ num_speeds = 0;
+ autoneg = (*speeds & ETH_LINK_SPEED_FIXED) == 0;
+
+ /* Reset */
+ hw->phy.autoneg_advertised = 0;
+
+ if (*speeds & ~(ETH_LINK_SPEED_10M_HD | ETH_LINK_SPEED_10M |
+ ETH_LINK_SPEED_100M_HD | ETH_LINK_SPEED_100M |
+ ETH_LINK_SPEED_1G | ETH_LINK_SPEED_2_5G |
+ ETH_LINK_SPEED_FIXED)) {
+ num_speeds = -1;
+ goto error_invalid_config;
+ }
+ if (*speeds & ETH_LINK_SPEED_10M_HD) {
+ hw->phy.autoneg_advertised |= ADVERTISE_10_HALF;
+ num_speeds++;
+ }
+ if (*speeds & ETH_LINK_SPEED_10M) {
+ hw->phy.autoneg_advertised |= ADVERTISE_10_FULL;
+ num_speeds++;
+ }
+ if (*speeds & ETH_LINK_SPEED_100M_HD) {
+ hw->phy.autoneg_advertised |= ADVERTISE_100_HALF;
+ num_speeds++;
+ }
+ if (*speeds & ETH_LINK_SPEED_100M) {
+ hw->phy.autoneg_advertised |= ADVERTISE_100_FULL;
+ num_speeds++;
+ }
+ if (*speeds & ETH_LINK_SPEED_1G) {
+ hw->phy.autoneg_advertised |= ADVERTISE_1000_FULL;
+ num_speeds++;
+ }
+ if (*speeds & ETH_LINK_SPEED_2_5G) {
+ hw->phy.autoneg_advertised |= ADVERTISE_2500_FULL;
+ num_speeds++;
+ }
+ if (num_speeds == 0 || (!autoneg && num_speeds > 1))
+ goto error_invalid_config;
+
+ /* Set/reset the mac.autoneg based on the link speed,
+ * fixed or not
+ */
+ if (!autoneg) {
+ hw->mac.autoneg = 0;
+ hw->mac.forced_speed_duplex =
+ hw->phy.autoneg_advertised;
+ } else {
+ hw->mac.autoneg = 1;
+ }
+ }
+
+ igc_setup_link(hw);
+
+ if (rte_intr_allow_others(intr_handle)) {
+ /* check if lsc interrupt is enabled */
+ if (dev->data->dev_conf.intr_conf.lsc)
+ igc_lsc_interrupt_setup(dev, 1);
+ else
+ igc_lsc_interrupt_setup(dev, 0);
+ } else {
+ rte_intr_callback_unregister(intr_handle,
+ eth_igc_interrupt_handler,
+ (void *)dev);
+ if (dev->data->dev_conf.intr_conf.lsc)
+ PMD_DRV_LOG(INFO, "lsc won't enable because of"
+ " no intr multiplex");
+ }
+
+ /* enable uio/vfio intr/eventfd mapping */
+ rte_intr_enable(intr_handle);
+
+ /* resume enabled intr since hw reset */
+ igc_intr_other_enable(dev);
+
+ eth_igc_link_update(dev, 0);
+
return 0;
+
+error_invalid_config:
+ PMD_DRV_LOG(ERR, "Invalid advertised speeds (%u) for port %u",
+ dev->data->dev_conf.link_speeds, dev->data->port_id);
+ return -EINVAL;
}
static int
@@ -232,10 +752,28 @@ static int eth_igc_infos_get(struct rte_eth_dev *dev,
static void
eth_igc_close(struct rte_eth_dev *dev)
{
+ struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(dev);
+ struct rte_intr_handle *intr_handle = &pci_dev->intr_handle;
struct igc_hw *hw = IGC_DEV_PRIVATE_HW(dev);
+ struct igc_adapter *adapter = IGC_DEV_PRIVATE(dev);
+ int retry = 0;
PMD_INIT_FUNC_TRACE();
+ if (!adapter->stopped)
+ eth_igc_stop(dev);
+
+ igc_intr_other_disable(dev);
+ do {
+ int ret = rte_intr_callback_unregister(intr_handle,
+ eth_igc_interrupt_handler, dev);
+ if (ret >= 0 || ret == -ENOENT || ret == -EINVAL)
+ break;
+
+ PMD_DRV_LOG(ERR, "intr callback unregister failed: %d", ret);
+ DELAY(200 * 1000); /* delay 200ms */
+ } while (retry++ < 5);
+
igc_phy_hw_reset(hw);
igc_hw_control_release(hw);
@@ -258,6 +796,7 @@ static int eth_igc_infos_get(struct rte_eth_dev *dev,
eth_igc_dev_init(struct rte_eth_dev *dev)
{
struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(dev);
+ struct igc_adapter *igc = IGC_DEV_PRIVATE(dev);
struct igc_hw *hw = IGC_DEV_PRIVATE_HW(dev);
int error = 0;
@@ -365,6 +904,7 @@ static int eth_igc_infos_get(struct rte_eth_dev *dev,
dev->data->dev_flags |= RTE_ETH_DEV_CLOSE_REMOVE;
hw->mac.get_link_status = 1;
+ igc->stopped = 0;
/* Indicate SOL/IDER usage */
if (igc_check_reset_block(hw) < 0)
@@ -375,6 +915,15 @@ static int eth_igc_infos_get(struct rte_eth_dev *dev,
dev->data->port_id, pci_dev->id.vendor_id,
pci_dev->id.device_id);
+ rte_intr_callback_register(&pci_dev->intr_handle,
+ eth_igc_interrupt_handler, (void *)dev);
+
+ /* enable uio/vfio intr/eventfd mapping */
+ rte_intr_enable(&pci_dev->intr_handle);
+
+ /* enable support intr */
+ igc_intr_other_enable(dev);
+
return 0;
err_late:
@@ -425,16 +974,81 @@ static int eth_igc_infos_get(struct rte_eth_dev *dev,
}
static int
+eth_igc_fw_version_get(struct rte_eth_dev *dev, char *fw_version,
+ size_t fw_size)
+{
+ struct igc_hw *hw = IGC_DEV_PRIVATE_HW(dev);
+ struct igc_fw_version fw;
+ int ret;
+
+ igc_get_fw_version(hw, &fw);
+
+ /* if option rom is valid, display its version too */
+ if (fw.or_valid) {
+ ret = snprintf(fw_version, fw_size,
+ "%d.%d, 0x%08x, %d.%d.%d",
+ fw.eep_major, fw.eep_minor, fw.etrack_id,
+ fw.or_major, fw.or_build, fw.or_patch);
+ /* no option rom */
+ } else {
+ if (fw.etrack_id != 0X0000) {
+ ret = snprintf(fw_version, fw_size,
+ "%d.%d, 0x%08x",
+ fw.eep_major, fw.eep_minor,
+ fw.etrack_id);
+ } else {
+ ret = snprintf(fw_version, fw_size,
+ "%d.%d.%d",
+ fw.eep_major, fw.eep_minor,
+ fw.eep_build);
+ }
+ }
+
+ ret += 1; /* add the size of '\0' */
+ if (fw_size < (u32)ret)
+ return ret;
+ else
+ return 0;
+}
+
+static int
eth_igc_infos_get(struct rte_eth_dev *dev, struct rte_eth_dev_info *dev_info)
{
- PMD_INIT_FUNC_TRACE();
- RTE_SET_USED(dev);
+ struct igc_hw *hw = IGC_DEV_PRIVATE_HW(dev);
+
+ dev_info->min_rx_bufsize = 256; /* See BSIZE field of RCTL register. */
+ dev_info->max_rx_pktlen = MAX_RX_JUMBO_FRAME_SIZE;
+ dev_info->max_mac_addrs = hw->mac.rar_entry_count;
dev_info->max_rx_queues = IGC_QUEUE_PAIRS_NUM;
dev_info->max_tx_queues = IGC_QUEUE_PAIRS_NUM;
+ dev_info->max_vmdq_pools = 0;
+
+ dev_info->speed_capa = ETH_LINK_SPEED_10M_HD | ETH_LINK_SPEED_10M |
+ ETH_LINK_SPEED_100M_HD | ETH_LINK_SPEED_100M |
+ ETH_LINK_SPEED_1G | ETH_LINK_SPEED_2_5G;
+
+ dev_info->max_mtu = dev_info->max_rx_pktlen - IGC_ETH_OVERHEAD;
+ dev_info->min_mtu = RTE_ETHER_MIN_MTU;
return 0;
}
static int
+eth_igc_led_on(struct rte_eth_dev *dev)
+{
+ struct igc_hw *hw = IGC_DEV_PRIVATE_HW(dev);
+
+ return igc_led_on(hw) == IGC_SUCCESS ? 0 : -ENOTSUP;
+}
+
+static int
+eth_igc_led_off(struct rte_eth_dev *dev)
+{
+ struct igc_hw *hw = IGC_DEV_PRIVATE_HW(dev);
+
+ return igc_led_off(hw) == IGC_SUCCESS ? 0 : -ENOTSUP;
+}
+
+static int
eth_igc_rx_queue_setup(struct rte_eth_dev *dev, uint16_t rx_queue_id,
uint16_t nb_rx_desc, unsigned int socket_id,
const struct rte_eth_rxconf *rx_conf,
@@ -464,6 +1078,16 @@ static int eth_igc_infos_get(struct rte_eth_dev *dev,
return 0;
}
+static void eth_igc_tx_queue_release(void *txq)
+{
+ RTE_SET_USED(txq);
+}
+
+static void eth_igc_rx_queue_release(void *rxq)
+{
+ RTE_SET_USED(rxq);
+}
+
static int
eth_igc_pci_probe(struct rte_pci_driver *pci_drv __rte_unused,
struct rte_pci_device *pci_dev)
diff --git a/drivers/net/igc/igc_ethdev.h b/drivers/net/igc/igc_ethdev.h
index 4cff0e3..c1e3217 100644
--- a/drivers/net/igc/igc_ethdev.h
+++ b/drivers/net/igc/igc_ethdev.h
@@ -18,11 +18,19 @@
#define IGC_QUEUE_PAIRS_NUM 4
+/* structure for interrupt relative data */
+struct igc_interrupt {
+ uint32_t flags;
+ uint32_t mask;
+};
+
/*
* Structure to store private data for each driver instance (for each port).
*/
struct igc_adapter {
struct igc_hw hw;
+ struct igc_interrupt intr;
+ bool stopped;
};
#define IGC_DEV_PRIVATE(_dev) ((_dev)->data->dev_private)
@@ -30,6 +38,33 @@ struct igc_adapter {
#define IGC_DEV_PRIVATE_HW(_dev) \
(&((struct igc_adapter *)(_dev)->data->dev_private)->hw)
+#define IGC_DEV_PRIVATE_INTR(_dev) \
+ (&((struct igc_adapter *)(_dev)->data->dev_private)->intr)
+
+static inline void
+igc_read_reg_check_set_bits(struct igc_hw *hw, uint32_t reg, uint32_t bits)
+{
+ uint32_t reg_val = IGC_READ_REG(hw, reg);
+
+ bits |= reg_val;
+ if (bits == reg_val)
+ return; /* no need to write back */
+
+ IGC_WRITE_REG(hw, reg, bits);
+}
+
+static inline void
+igc_read_reg_check_clear_bits(struct igc_hw *hw, uint32_t reg, uint32_t bits)
+{
+ uint32_t reg_val = IGC_READ_REG(hw, reg);
+
+ bits = reg_val & ~bits;
+ if (bits == reg_val)
+ return; /* no need to write back */
+
+ IGC_WRITE_REG(hw, reg, bits);
+}
+
#ifdef __cplusplus
}
#endif
--
1.8.3.1
next prev parent reply other threads:[~2020-04-13 6:32 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-13 6:30 [dpdk-dev] [PATCH v3 00/11] igc pmd alvinx.zhang
2020-04-13 6:30 ` [dpdk-dev] [PATCH v3 01/11] net/igc: add igc PMD alvinx.zhang
2020-04-13 15:19 ` Stephen Hemminger
2020-04-15 8:47 ` [dpdk-dev] [PATCH v4 00/11] " alvinx.zhang
2020-04-15 8:48 ` [dpdk-dev] [PATCH v4 01/11] net/igc: add " alvinx.zhang
2020-04-15 8:48 ` [dpdk-dev] [PATCH v4 02/11] net/igc: support device initialization alvinx.zhang
2020-04-15 8:48 ` [dpdk-dev] [PATCH v4 03/11] net/igc: implement device base ops alvinx.zhang
2020-04-15 8:48 ` [dpdk-dev] [PATCH v4 04/11] net/igc: support reception and transmission of packets alvinx.zhang
2020-04-15 8:48 ` [dpdk-dev] [PATCH v4 05/11] net/igc: enable statistics alvinx.zhang
2020-04-15 8:48 ` [dpdk-dev] [PATCH v4 06/11] net/igc: enable Rx queue interrupts alvinx.zhang
2020-04-15 8:48 ` [dpdk-dev] [PATCH v4 07/11] net/igc: implement flow control ops alvinx.zhang
2020-04-15 8:48 ` [dpdk-dev] [PATCH v4 08/11] net/igc: implement RSS API alvinx.zhang
2020-04-15 8:48 ` [dpdk-dev] [PATCH v4 09/11] net/igc: implement feature of VLAN alvinx.zhang
2020-04-15 8:48 ` [dpdk-dev] [PATCH v4 10/11] net/igc: implement MAC-loopback mode alvinx.zhang
2020-04-15 8:48 ` [dpdk-dev] [PATCH v4 11/11] net/igc: implement flow API alvinx.zhang
2020-04-15 11:14 ` [dpdk-dev] [PATCH v4 00/11] igc PMD Ferruh Yigit
2020-04-13 6:30 ` [dpdk-dev] [PATCH v3 02/11] net/igc: support device initialization alvinx.zhang
2020-04-13 6:30 ` alvinx.zhang [this message]
2020-04-13 15:23 ` [dpdk-dev] [PATCH v3 03/11] net/igc: implement device base ops Stephen Hemminger
2020-04-13 6:30 ` [dpdk-dev] [PATCH v3 04/11] net/igc: support reception and transmission of packets alvinx.zhang
2020-04-13 6:30 ` [dpdk-dev] [PATCH v3 05/11] net/igc: enable statistics alvinx.zhang
2020-04-13 6:30 ` [dpdk-dev] [PATCH v3 06/11] net/igc: enable Rx queue interrupts alvinx.zhang
2020-04-13 6:30 ` [dpdk-dev] [PATCH v3 07/11] net/igc: implement flow control ops alvinx.zhang
2020-04-13 6:30 ` [dpdk-dev] [PATCH v3 08/11] net/igc: implement RSS API alvinx.zhang
2020-04-13 6:30 ` [dpdk-dev] [PATCH v3 09/11] net/igc: implement feature of VLAN alvinx.zhang
2020-04-13 6:30 ` [dpdk-dev] [PATCH v3 10/11] net/igc: implement MAC-loopback mode alvinx.zhang
2020-04-13 6:30 ` [dpdk-dev] [PATCH v3 11/11] net/igc: implement flow API alvinx.zhang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200413063037.13728-4-alvinx.zhang@intel.com \
--to=alvinx.zhang@intel.com \
--cc=dev@dpdk.org \
--cc=xiaolong.ye@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).