From: Jeff Guo <jia.guo@intel.com>
To: bernard.iremonger@intel.com, orika@mellanox.com,
xiaolong.ye@intel.com, qi.z.zhang@intel.com
Cc: dev@dpdk.org, jingjing.wu@intel.com, yahui.cao@intel.com,
simei.su@intel.com, jia.guo@intel.com
Subject: [dpdk-dev] [dpdk-dev v6 0/3] add RSS configuration for iavf
Date: Thu, 16 Apr 2020 15:19:41 -0400 [thread overview]
Message-ID: <20200416191944.23284-1-jia.guo@intel.com> (raw)
In-Reply-To: <20200318170401.7938-5-jia.guo@intel.com>
Because the VF must be capable of configuring RSS, so add RSS configuration
for iavf, VFs could add or delete a RSS rule base on the PF's capability.
The supported protocol rss input set as below.
l2-src-only/
l2-dst-only/
svlan/
cvlan/
ipv4/
ipv6/
l3_src_only/
l3_dst_only/
l2tpv3/
esp/
ah/
pfcp/
gtpu down/
gtpu up/
udp/
tcp/
sctp/
use tespmd for example:
testpmd> flow create 0 ingress pattern eth / ipv4 / end actions rss types l3-src-only end key_len 0 queues end / end
use scapy for example:
> sendp(Ether(dst="00:01:23:45:67:01")/IP(src=RandIP())/Raw('x'*20),iface="ens785f1",loop=1,inter=0.3)
the expect result:
the rss hash works and the packets will go to difference queue for load balance.
This patchset depends on below patch sets.
(1)http://patches.dpdk.org/project/dpdk/list/?series=8950
add generic filter support for iavf
(2)http://patches.dpdk.org/project/dpdk/list/?series=9280
iavf share code update
(3)http://patches.dpdk.org/project/dpdk/list/?series=9244
framework for advanced iAVF PMD
v6:
1.rename some struct and type
2.use pattern hint to distingush different layer for hash
3.add some missing part and refine commit log
v5:
1.rename ETH_XXX to L2_XXX.
2.NULL checking and commit log refine.
v4:
1.refine the rss type checking
2.delete unnecessary pdu type item.
v3:
1.refince rss offload types.
2.add doc in release note
3.refine some naming base on virtchnl definition.
4.move gtp pdu index from normal to special.
v2:
1.refine some rte eth rss offload types.
2.add NAT T ESP and refine gtpu down/up
3.reference some fixing patch from pf side.
Jeff Guo (3):
ethdev: add new RSS offload types
net/iavf: add RSS configuration for VFs
app/testpmd: add new types to RSS hash commands
app/test-pmd/cmdline.c | 28 +-
app/test-pmd/config.c | 9 +
doc/guides/rel_notes/release_20_05.rst | 2 +
drivers/net/iavf/Makefile | 1 +
drivers/net/iavf/iavf.h | 2 +
drivers/net/iavf/iavf_hash.c | 1053 ++++++++++++++++++++++++
drivers/net/iavf/iavf_vchnl.c | 33 +-
drivers/net/iavf/meson.build | 1 +
lib/librte_ethdev/rte_ethdev.h | 11 +-
9 files changed, 1131 insertions(+), 9 deletions(-)
create mode 100644 drivers/net/iavf/iavf_hash.c
--
2.20.1
next prev parent reply other threads:[~2020-04-16 10:23 UTC|newest]
Thread overview: 79+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-18 17:03 [dpdk-dev] [dpdk-dev 0/4] " Jeff Guo
2020-03-18 17:03 ` [dpdk-dev] [dpdk-dev 1/4] ethdev: add new RSS offload types Jeff Guo
2020-03-18 17:03 ` [dpdk-dev] [dpdk-dev 2/4] net/iavf: add RSS configuration for VFs Jeff Guo
2020-03-18 17:04 ` [dpdk-dev] [dpdk-dev 3/4] app/testpmd: support GTP PDU type Jeff Guo
2020-03-18 17:04 ` [dpdk-dev] [dpdk-dev 4/4] app/testpmd: add new types to RSS hash commands Jeff Guo
2020-03-26 16:40 ` [dpdk-dev] [dpdk-dev v2 0/4] add RSS configuration for iavf Jeff Guo
2020-03-26 16:40 ` [dpdk-dev] [dpdk-dev v2 1/4] ethdev: add new RSS offload types Jeff Guo
2020-04-07 17:02 ` Iremonger, Bernard
2020-04-08 0:15 ` Zhang, Qi Z
2020-04-09 2:04 ` Jeff Guo
2020-03-26 16:40 ` [dpdk-dev] [dpdk-dev v2 2/4] net/iavf: add RSS configuration for VFs Jeff Guo
2020-03-26 16:40 ` [dpdk-dev] [dpdk-dev v2 3/4] app/testpmd: support GTP PDU type Jeff Guo
2020-03-29 8:44 ` Ori Kam
2020-03-30 8:29 ` Jeff Guo
2020-03-30 10:18 ` Ori Kam
2020-03-31 8:50 ` Jeff Guo
2020-04-05 15:56 ` Ori Kam
2020-04-07 5:37 ` Jeff Guo
2020-04-12 9:58 ` Ori Kam
2020-04-14 3:05 ` Jeff Guo
2020-04-14 5:57 ` Ori Kam
2020-03-26 16:40 ` [dpdk-dev] [dpdk-dev v2 4/4] app/testpmd: add new types to RSS hash commands Jeff Guo
2020-04-11 0:09 ` [dpdk-dev] [dpdk-dev v3 0/4] add RSS configuration for iavf Jeff Guo
2020-04-11 0:09 ` [dpdk-dev] [dpdk-dev v3 1/4] ethdev: add new RSS offload types Jeff Guo
2020-04-13 0:13 ` Zhang, Qi Z
2020-04-11 0:09 ` [dpdk-dev] [dpdk-dev v3 2/4] net/iavf: add RSS configuration for VFs Jeff Guo
2020-04-13 2:02 ` Zhang, Qi Z
2020-04-14 3:42 ` Jeff Guo
2020-04-11 0:09 ` [dpdk-dev] [dpdk-dev v3 3/4] app/testpmd: support GTP PDU type Jeff Guo
2020-04-11 0:09 ` [dpdk-dev] [dpdk-dev v3 4/4] app/testpmd: add new types to RSS hash commands Jeff Guo
2020-04-14 17:42 ` [dpdk-dev] [dpdk-dev v4 0/3] add RSS configuration for iavf Jeff Guo
2020-04-14 17:42 ` [dpdk-dev] [dpdk-dev v4 1/3] ethdev: add new RSS offload types Jeff Guo
2020-04-14 9:42 ` Ori Kam
2020-04-15 2:31 ` Zhang, Qi Z
2020-04-15 3:11 ` Jeff Guo
2020-04-14 17:42 ` [dpdk-dev] [dpdk-dev v4 2/3] net/iavf: add RSS configuration for VFs Jeff Guo
2020-04-15 2:29 ` Zhang, Qi Z
2020-04-14 17:42 ` [dpdk-dev] [dpdk-dev v4 3/3] app/testpmd: add new types to RSS hash commands Jeff Guo
2020-04-14 9:48 ` Ori Kam
2020-04-15 8:08 ` Jeff Guo
2020-04-15 16:31 ` Stephen Hemminger
2020-04-16 8:55 ` Jeff Guo
2020-04-15 17:11 ` [dpdk-dev] [dpdk-dev v5 0/3] add RSS configuration for iavf Jeff Guo
2020-04-15 17:11 ` [dpdk-dev] [dpdk-dev v5 1/3] ethdev: add new RSS offload types Jeff Guo
2020-04-15 15:38 ` Iremonger, Bernard
2020-04-15 22:13 ` Ferruh Yigit
2020-04-16 3:22 ` Jeff Guo
2020-04-16 6:57 ` Ori Kam
2020-04-15 17:11 ` [dpdk-dev] [dpdk-dev v5 2/3] net/iavf: add RSS configuration for VFs Jeff Guo
2020-04-15 17:11 ` [dpdk-dev] [dpdk-dev v5 3/3] app/testpmd: add new types to RSS hash commands Jeff Guo
2020-04-15 15:01 ` Iremonger, Bernard
2020-04-16 7:51 ` Jeff Guo
2020-04-16 9:14 ` Iremonger, Bernard
2020-04-16 10:22 ` Jeff Guo
2020-04-16 19:19 ` Jeff Guo [this message]
2020-04-16 19:19 ` [dpdk-dev] [dpdk-dev v6 1/3] ethdev: add new RSS offload types Jeff Guo
2020-04-16 19:19 ` [dpdk-dev] [dpdk-dev v6 2/3] net/iavf: add RSS configuration for VFs Jeff Guo
2020-04-16 19:19 ` [dpdk-dev] [dpdk-dev v6 3/3] app/testpmd: add new types to RSS hash commands Jeff Guo
2020-04-16 10:40 ` Ori Kam
2020-04-16 15:16 ` Jeff Guo
2020-04-16 11:16 ` Iremonger, Bernard
2020-04-16 15:15 ` Jeff Guo
2020-04-16 15:52 ` Ferruh Yigit
2020-04-17 1:50 ` Jeff Guo
2020-04-17 18:31 ` [dpdk-dev] [dpdk-dev v7 0/3] add RSS configuration for iavf Jeff Guo
2020-04-17 18:31 ` [dpdk-dev] [dpdk-dev v7 1/3] ethdev: add new RSS offload types Jeff Guo
2020-04-21 10:14 ` Iremonger, Bernard
2020-04-17 18:31 ` [dpdk-dev] [dpdk-dev v7 2/3] net/iavf: add RSS configuration for VFs Jeff Guo
2020-04-17 18:31 ` [dpdk-dev] [dpdk-dev v7 3/3] app/testpmd: add new types to RSS hash commands Jeff Guo
2020-04-19 6:53 ` Ori Kam
2020-04-21 9:44 ` Iremonger, Bernard
2020-04-21 12:37 ` Jeff Guo
2020-04-22 1:02 ` [dpdk-dev] [dpdk-dev v8 0/3] add RSS configuration for iavf Jeff Guo
2020-04-21 17:15 ` Ferruh Yigit
2020-04-22 1:02 ` [dpdk-dev] [dpdk-dev v8 1/3] ethdev: add new RSS offload types Jeff Guo
2020-04-21 17:15 ` Ferruh Yigit
2020-04-22 1:02 ` [dpdk-dev] [dpdk-dev v8 2/3] net/iavf: add RSS configuration for VFs Jeff Guo
2020-04-22 1:02 ` [dpdk-dev] [dpdk-dev v8 3/3] app/testpmd: add new types to RSS hash commands Jeff Guo
2020-04-21 14:29 ` Iremonger, Bernard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200416191944.23284-1-jia.guo@intel.com \
--to=jia.guo@intel.com \
--cc=bernard.iremonger@intel.com \
--cc=dev@dpdk.org \
--cc=jingjing.wu@intel.com \
--cc=orika@mellanox.com \
--cc=qi.z.zhang@intel.com \
--cc=simei.su@intel.com \
--cc=xiaolong.ye@intel.com \
--cc=yahui.cao@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).