From: Arek Kusztal <arkadiuszx.kusztal@intel.com>
To: dev@dpdk.org
Cc: akhil.goyal@nxp.com, fiona.trahe@intel.com,
Arek Kusztal <arkadiuszx.kusztal@intel.com>
Subject: [dpdk-dev] [PATCH v3 2/2] test/cryptodev: add chacha poly test cases to cryptodev
Date: Fri, 17 Apr 2020 19:30:10 +0200 [thread overview]
Message-ID: <20200417173010.11572-2-arkadiuszx.kusztal@intel.com> (raw)
In-Reply-To: <20200417173010.11572-1-arkadiuszx.kusztal@intel.com>
This patch adds Chacha20-Poly1305 implementation to
cryptodev tests.
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
---
v3:
- rebased against 20.05
app/test/test_cryptodev.c | 18 ++++++-
app/test/test_cryptodev_aead_test_vectors.h | 75 +++++++++++++++++++++++++++++
2 files changed, 92 insertions(+), 1 deletion(-)
diff --git a/app/test/test_cryptodev.c b/app/test/test_cryptodev.c
index 3df63eb..5520ba3 100644
--- a/app/test/test_cryptodev.c
+++ b/app/test/test_cryptodev.c
@@ -11447,6 +11447,18 @@ auth_decrypt_AES128CBC_HMAC_SHA1_esn_check(void)
&aes128cbc_hmac_sha1_aad_test_vector);
}
+static int
+test_chacha20_poly1305_encrypt_test_case_rfc8439(void)
+{
+ return test_authenticated_encryption(&chacha20_poly1305_case_rfc8439);
+}
+
+static int
+test_chacha20_poly1305_decrypt_test_case_rfc8439(void)
+{
+ return test_authenticated_decryption(&chacha20_poly1305_case_rfc8439);
+}
+
#ifdef RTE_LIBRTE_PMD_CRYPTO_SCHEDULER
/* global AESNI slave IDs for the scheduler test */
@@ -11901,7 +11913,11 @@ static struct unit_test_suite cryptodev_testsuite = {
test_AES_GMAC_authentication_test_case_4),
TEST_CASE_ST(ut_setup, ut_teardown,
test_AES_GMAC_authentication_verify_test_case_4),
-
+ /** Chacha20-Poly1305 */
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_chacha20_poly1305_encrypt_test_case_rfc8439),
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_chacha20_poly1305_decrypt_test_case_rfc8439),
/** SNOW 3G encrypt only (UEA2) */
TEST_CASE_ST(ut_setup, ut_teardown,
test_snow3g_encryption_test_case_1),
diff --git a/app/test/test_cryptodev_aead_test_vectors.h b/app/test/test_cryptodev_aead_test_vectors.h
index e62fdb2..140f253 100644
--- a/app/test/test_cryptodev_aead_test_vectors.h
+++ b/app/test/test_cryptodev_aead_test_vectors.h
@@ -3823,4 +3823,79 @@ static const struct aead_test_data ccm_test_case_256_3 = {
.len = 8
}
};
+static uint8_t chacha_aad_rfc8439[] = {
+ 0x50, 0x51, 0x52, 0x53, 0xc0, 0xc1, 0xc2, 0xc3,
+ 0xc4, 0xc5, 0xc6, 0xc7
+};
+
+static const struct aead_test_data chacha20_poly1305_case_rfc8439 = {
+ .algo = RTE_CRYPTO_AEAD_CHACHA20_POLY1305,
+ .key = {
+ .data = {
+ 0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87,
+ 0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f,
+ 0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97,
+ 0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f
+ },
+ .len = 32
+ },
+ .iv = {
+ .data = {
+ 0x07, 0x00, 0x00, 0x00, 0x40, 0x41, 0x42, 0x43,
+ 0x44, 0x45, 0x46, 0x47
+ },
+ .len = 12
+ },
+ .aad = {
+ .data = chacha_aad_rfc8439,
+ .len = 12
+ },
+ .plaintext = {
+ .data = {
+ 0x4c, 0x61, 0x64, 0x69, 0x65, 0x73, 0x20, 0x61,
+ 0x6e, 0x64, 0x20, 0x47, 0x65, 0x6e, 0x74, 0x6c,
+ 0x65, 0x6d, 0x65, 0x6e, 0x20, 0x6f, 0x66, 0x20,
+ 0x74, 0x68, 0x65, 0x20, 0x63, 0x6c, 0x61, 0x73,
+ 0x73, 0x20, 0x6f, 0x66, 0x20, 0x27, 0x39, 0x39,
+ 0x3a, 0x20, 0x49, 0x66, 0x20, 0x49, 0x20, 0x63,
+ 0x6f, 0x75, 0x6c, 0x64, 0x20, 0x6f, 0x66, 0x66,
+ 0x65, 0x72, 0x20, 0x79, 0x6f, 0x75, 0x20, 0x6f,
+ 0x6e, 0x6c, 0x79, 0x20, 0x6f, 0x6e, 0x65, 0x20,
+ 0x74, 0x69, 0x70, 0x20, 0x66, 0x6f, 0x72, 0x20,
+ 0x74, 0x68, 0x65, 0x20, 0x66, 0x75, 0x74, 0x75,
+ 0x72, 0x65, 0x2c, 0x20, 0x73, 0x75, 0x6e, 0x73,
+ 0x63, 0x72, 0x65, 0x65, 0x6e, 0x20, 0x77, 0x6f,
+ 0x75, 0x6c, 0x64, 0x20, 0x62, 0x65, 0x20, 0x69,
+ 0x74, 0x2e
+ },
+ .len = 114
+ },
+ .ciphertext = {
+ .data = {
+ 0xd3, 0x1a, 0x8d, 0x34, 0x64, 0x8e, 0x60, 0xdb,
+ 0x7b, 0x86, 0xaf, 0xbc, 0x53, 0xef, 0x7e, 0xc2,
+ 0xa4, 0xad, 0xed, 0x51, 0x29, 0x6e, 0x08, 0xfe,
+ 0xa9, 0xe2, 0xb5, 0xa7, 0x36, 0xee, 0x62, 0xd6,
+ 0x3d, 0xbe, 0xa4, 0x5e, 0x8c, 0xa9, 0x67, 0x12,
+ 0x82, 0xfa, 0xfb, 0x69, 0xda, 0x92, 0x72, 0x8b,
+ 0x1a, 0x71, 0xde, 0x0a, 0x9e, 0x06, 0x0b, 0x29,
+ 0x05, 0xd6, 0xa5, 0xb6, 0x7e, 0xcd, 0x3b, 0x36,
+ 0x92, 0xdd, 0xbd, 0x7f, 0x2d, 0x77, 0x8b, 0x8c,
+ 0x98, 0x03, 0xae, 0xe3, 0x28, 0x09, 0x1b, 0x58,
+ 0xfa, 0xb3, 0x24, 0xe4, 0xfa, 0xd6, 0x75, 0x94,
+ 0x55, 0x85, 0x80, 0x8b, 0x48, 0x31, 0xd7, 0xbc,
+ 0x3f, 0xf4, 0xde, 0xf0, 0x8e, 0x4b, 0x7a, 0x9d,
+ 0xe5, 0x76, 0xd2, 0x65, 0x86, 0xce, 0xc6, 0x4b,
+ 0x61, 0x16
+ },
+ .len = 114
+ },
+ .auth_tag = {
+ .data = {
+ 0x1a, 0xe1, 0x0b, 0x59, 0x4f, 0x09, 0xe2, 0x6a,
+ 0x7e, 0x90, 0x2e, 0xcb, 0xd0, 0x60, 0x06, 0x91
+ },
+ .len = 16
+ }
+};
#endif /* TEST_CRYPTODEV_AEAD_TEST_VECTORS_H_ */
--
2.1.0
prev parent reply other threads:[~2020-04-17 17:30 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-17 17:30 [dpdk-dev] [PATCH v3 1/2] crypto/qat: add chacha poly implementation Arek Kusztal
2020-04-17 17:30 ` Arek Kusztal [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200417173010.11572-2-arkadiuszx.kusztal@intel.com \
--to=arkadiuszx.kusztal@intel.com \
--cc=akhil.goyal@nxp.com \
--cc=dev@dpdk.org \
--cc=fiona.trahe@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).