DPDK patches and discussions
 help / color / mirror / Atom feed
From: Jeff Guo <jia.guo@intel.com>
To: bernard.iremonger@intel.com, orika@mellanox.com,
	wenzhuo.lu@intel.com, stephen@networkplumber.org,
	qi.z.zhang@intel.com, jingjing.wu@intel.com
Cc: beilei.xing@intel.com, xiaolong.ye@intel.com, dev@dpdk.org,
	yahui.cao@intel.com, simei.su@intel.com, jia.guo@intel.com
Subject: [dpdk-dev] [dpdk-dev v8 3/3] app/testpmd: add new types to RSS hash commands
Date: Tue, 21 Apr 2020 21:02:55 -0400	[thread overview]
Message-ID: <20200422010255.76137-4-jia.guo@intel.com> (raw)
In-Reply-To: <20200422010255.76137-1-jia.guo@intel.com>

Add some new types, such as eth/l2-src-only/l2-dst-only/svlan/cvlan/
l2tpv3/esp/ah/pfcp types into RSS hash commands, it could be used
to configure these rss input set by cmdline.

Example flow commands was:
testpmd>flow create 0 ingress pattern eth / ipv4 / l2tpv3oip / end \
	actions rss types l2tpv3 end key_len 0 queues end / end

port config commands was:
testpmd>port config all rss l2tpv3

Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Ori Kam <orika@mellanox.com>
---
v8->v7:
refine guide doc.
---
 app/test-pmd/cmdline.c                      | 34 +++++++++++++++++----
 app/test-pmd/config.c                       | 14 +++++++--
 doc/guides/testpmd_app_ug/testpmd_funcs.rst |  6 ++--
 3 files changed, 43 insertions(+), 11 deletions(-)

diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
index a36c505c5..96fe7c818 100644
--- a/app/test-pmd/cmdline.c
+++ b/app/test-pmd/cmdline.c
@@ -2270,9 +2270,14 @@ cmd_config_rss_parsed(void *parsed_result,
 	int ret;
 
 	if (!strcmp(res->value, "all"))
-		rss_conf.rss_hf = ETH_RSS_IP | ETH_RSS_TCP |
-				ETH_RSS_UDP | ETH_RSS_SCTP |
-					ETH_RSS_L2_PAYLOAD;
+		rss_conf.rss_hf = ETH_RSS_ETH | ETH_RSS_VLAN | ETH_RSS_IP |
+			ETH_RSS_TCP | ETH_RSS_UDP | ETH_RSS_SCTP |
+			ETH_RSS_L2_PAYLOAD | ETH_RSS_L2TPV3 | ETH_RSS_ESP |
+			ETH_RSS_AH | ETH_RSS_PFCP;
+	else if (!strcmp(res->value, "eth"))
+		rss_conf.rss_hf = ETH_RSS_ETH;
+	else if (!strcmp(res->value, "vlan"))
+		rss_conf.rss_hf = ETH_RSS_VLAN;
 	else if (!strcmp(res->value, "ip"))
 		rss_conf.rss_hf = ETH_RSS_IP;
 	else if (!strcmp(res->value, "udp"))
@@ -2299,6 +2304,18 @@ cmd_config_rss_parsed(void *parsed_result,
 		rss_conf.rss_hf = ETH_RSS_L4_SRC_ONLY;
 	else if (!strcmp(res->value, "l4-dst-only"))
 		rss_conf.rss_hf = ETH_RSS_L4_DST_ONLY;
+	else if (!strcmp(res->value, "l2-src-only"))
+		rss_conf.rss_hf = ETH_RSS_L2_SRC_ONLY;
+	else if (!strcmp(res->value, "l2-dst-only"))
+		rss_conf.rss_hf = ETH_RSS_L2_DST_ONLY;
+	else if (!strcmp(res->value, "l2tpv3"))
+		rss_conf.rss_hf = ETH_RSS_L2TPV3;
+	else if (!strcmp(res->value, "esp"))
+		rss_conf.rss_hf = ETH_RSS_ESP;
+	else if (!strcmp(res->value, "ah"))
+		rss_conf.rss_hf = ETH_RSS_AH;
+	else if (!strcmp(res->value, "pfcp"))
+		rss_conf.rss_hf = ETH_RSS_PFCP;
 	else if (!strcmp(res->value, "none"))
 		rss_conf.rss_hf = 0;
 	else if (!strcmp(res->value, "default"))
@@ -2359,7 +2376,8 @@ cmdline_parse_inst_t cmd_config_rss = {
 	.f = cmd_config_rss_parsed,
 	.data = NULL,
 	.help_str = "port config all rss "
-		"all|default|ip|tcp|udp|sctp|ether|port|vxlan|geneve|nvgre|vxlan-gpe|none|<flowtype_id>",
+		"all|default|eth|vlan|ip|tcp|udp|sctp|ether|port|vxlan|geneve|"
+		"nvgre|vxlan-gpe|l2tpv3|esp|ah|pfcp|none|<flowtype_id>",
 	.tokens = {
 		(void *)&cmd_config_rss_port,
 		(void *)&cmd_config_rss_keyword,
@@ -2469,7 +2487,9 @@ cmdline_parse_token_string_t cmd_config_rss_hash_key_rss_type =
 				 "ipv4-other#ipv6#ipv6-frag#ipv6-tcp#ipv6-udp#"
 				 "ipv6-sctp#ipv6-other#l2-payload#ipv6-ex#"
 				 "ipv6-tcp-ex#ipv6-udp-ex#"
-				 "l3-src-only#l3-dst-only#l4-src-only#l4-dst-only");
+				 "l3-src-only#l3-dst-only#l4-src-only#l4-dst-only#"
+				 "l2-src-only#l2-dst-only#s-vlan#c-vlan#"
+				 "l2tpv3#esp#ah#pfcp");
 cmdline_parse_token_string_t cmd_config_rss_hash_key_value =
 	TOKEN_STRING_INITIALIZER(struct cmd_config_rss_hash_key, key, NULL);
 
@@ -2480,7 +2500,9 @@ cmdline_parse_inst_t cmd_config_rss_hash_key = {
 		"ipv4|ipv4-frag|ipv4-tcp|ipv4-udp|ipv4-sctp|ipv4-other|"
 		"ipv6|ipv6-frag|ipv6-tcp|ipv6-udp|ipv6-sctp|ipv6-other|"
 		"l2-payload|ipv6-ex|ipv6-tcp-ex|ipv6-udp-ex|"
-		"l3-src-only|l3-dst-only|l4-src-only|l4-dst-only "
+		"l3-src-only|l3-dst-only|l4-src-only|l4-dst-only|"
+		"l2-src-only|l2-dst-only|s-vlan|c-vlan|"
+		"l2tpv3|esp|ah|pfcp "
 		"<string of hex digits (variable length, NIC dependent)>",
 	.tokens = {
 		(void *)&cmd_config_rss_hash_key_port,
diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c
index 69c5633e8..72f25d152 100644
--- a/app/test-pmd/config.c
+++ b/app/test-pmd/config.c
@@ -75,10 +75,16 @@ static const struct {
 };
 
 const struct rss_type_info rss_type_table[] = {
-	{ "all", ETH_RSS_IP | ETH_RSS_TCP |
-			ETH_RSS_UDP | ETH_RSS_SCTP |
-			ETH_RSS_L2_PAYLOAD },
+	{ "all", ETH_RSS_ETH | ETH_RSS_VLAN | ETH_RSS_IP | ETH_RSS_TCP |
+		ETH_RSS_UDP | ETH_RSS_SCTP | ETH_RSS_L2_PAYLOAD |
+		ETH_RSS_L2TPV3 | ETH_RSS_ESP | ETH_RSS_AH | ETH_RSS_PFCP},
 	{ "none", 0 },
+	{ "eth", ETH_RSS_ETH },
+	{ "l2-src-only", ETH_RSS_L2_SRC_ONLY },
+	{ "l2-dst-only", ETH_RSS_L2_DST_ONLY },
+	{ "vlan", ETH_RSS_VLAN },
+	{ "s-vlan", ETH_RSS_S_VLAN },
+	{ "c-vlan", ETH_RSS_C_VLAN },
 	{ "ipv4", ETH_RSS_IPV4 },
 	{ "ipv4-frag", ETH_RSS_FRAG_IPV4 },
 	{ "ipv4-tcp", ETH_RSS_NONFRAG_IPV4_TCP },
@@ -110,6 +116,8 @@ const struct rss_type_info rss_type_table[] = {
 	{ "l4-dst-only", ETH_RSS_L4_DST_ONLY },
 	{ "esp", ETH_RSS_ESP },
 	{ "ah", ETH_RSS_AH },
+	{ "l2tpv3", ETH_RSS_L2TPV3 },
+	{ "pfcp", ETH_RSS_PFCP },
 	{ NULL, 0 },
 };
 
diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index dcee5de45..a360ecccf 100644
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -2199,12 +2199,14 @@ port config - RSS
 
 Set the RSS (Receive Side Scaling) mode on or off::
 
-   testpmd> port config all rss (all|default|ip|tcp|udp|sctp|ether|port|vxlan|geneve|nvgre|vxlan-gpe|none)
+   testpmd> port config all rss (all|default|eth|vlan|ip|tcp|udp|sctp|ether|port|vxlan|geneve|nvgre|vxlan-gpe|l2tpv3|esp|ah|pfcp|none)
 
 RSS is on by default.
 
-The ``all`` option is equivalent to ip|tcp|udp|sctp|ether.
+The ``all`` option is equivalent to eth|vlan|ip|tcp|udp|sctp|ether|l2tpv3|esp|ah|pfcp.
+
 The ``default`` option enables all supported RSS types reported by device info.
+
 The ``none`` option is equivalent to the ``--disable-rss`` command-line option.
 
 port config - RSS Reta
-- 
2.20.1


  parent reply	other threads:[~2020-04-21 13:05 UTC|newest]

Thread overview: 79+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-18 17:03 [dpdk-dev] [dpdk-dev 0/4] add RSS configuration for iavf Jeff Guo
2020-03-18 17:03 ` [dpdk-dev] [dpdk-dev 1/4] ethdev: add new RSS offload types Jeff Guo
2020-03-18 17:03 ` [dpdk-dev] [dpdk-dev 2/4] net/iavf: add RSS configuration for VFs Jeff Guo
2020-03-18 17:04 ` [dpdk-dev] [dpdk-dev 3/4] app/testpmd: support GTP PDU type Jeff Guo
2020-03-18 17:04 ` [dpdk-dev] [dpdk-dev 4/4] app/testpmd: add new types to RSS hash commands Jeff Guo
2020-03-26 16:40   ` [dpdk-dev] [dpdk-dev v2 0/4] add RSS configuration for iavf Jeff Guo
2020-03-26 16:40     ` [dpdk-dev] [dpdk-dev v2 1/4] ethdev: add new RSS offload types Jeff Guo
2020-04-07 17:02       ` Iremonger, Bernard
2020-04-08  0:15         ` Zhang, Qi Z
2020-04-09  2:04           ` Jeff Guo
2020-03-26 16:40     ` [dpdk-dev] [dpdk-dev v2 2/4] net/iavf: add RSS configuration for VFs Jeff Guo
2020-03-26 16:40     ` [dpdk-dev] [dpdk-dev v2 3/4] app/testpmd: support GTP PDU type Jeff Guo
2020-03-29  8:44       ` Ori Kam
2020-03-30  8:29         ` Jeff Guo
2020-03-30 10:18           ` Ori Kam
2020-03-31  8:50             ` Jeff Guo
2020-04-05 15:56               ` Ori Kam
2020-04-07  5:37                 ` Jeff Guo
2020-04-12  9:58                   ` Ori Kam
2020-04-14  3:05                     ` Jeff Guo
2020-04-14  5:57                       ` Ori Kam
2020-03-26 16:40     ` [dpdk-dev] [dpdk-dev v2 4/4] app/testpmd: add new types to RSS hash commands Jeff Guo
2020-04-11  0:09   ` [dpdk-dev] [dpdk-dev v3 0/4] add RSS configuration for iavf Jeff Guo
2020-04-11  0:09     ` [dpdk-dev] [dpdk-dev v3 1/4] ethdev: add new RSS offload types Jeff Guo
2020-04-13  0:13       ` Zhang, Qi Z
2020-04-11  0:09     ` [dpdk-dev] [dpdk-dev v3 2/4] net/iavf: add RSS configuration for VFs Jeff Guo
2020-04-13  2:02       ` Zhang, Qi Z
2020-04-14  3:42         ` Jeff Guo
2020-04-11  0:09     ` [dpdk-dev] [dpdk-dev v3 3/4] app/testpmd: support GTP PDU type Jeff Guo
2020-04-11  0:09     ` [dpdk-dev] [dpdk-dev v3 4/4] app/testpmd: add new types to RSS hash commands Jeff Guo
2020-04-14 17:42   ` [dpdk-dev] [dpdk-dev v4 0/3] add RSS configuration for iavf Jeff Guo
2020-04-14 17:42     ` [dpdk-dev] [dpdk-dev v4 1/3] ethdev: add new RSS offload types Jeff Guo
2020-04-14  9:42       ` Ori Kam
2020-04-15  2:31         ` Zhang, Qi Z
2020-04-15  3:11           ` Jeff Guo
2020-04-14 17:42     ` [dpdk-dev] [dpdk-dev v4 2/3] net/iavf: add RSS configuration for VFs Jeff Guo
2020-04-15  2:29       ` Zhang, Qi Z
2020-04-14 17:42     ` [dpdk-dev] [dpdk-dev v4 3/3] app/testpmd: add new types to RSS hash commands Jeff Guo
2020-04-14  9:48       ` Ori Kam
2020-04-15  8:08         ` Jeff Guo
2020-04-15 16:31         ` Stephen Hemminger
2020-04-16  8:55           ` Jeff Guo
2020-04-15 17:11   ` [dpdk-dev] [dpdk-dev v5 0/3] add RSS configuration for iavf Jeff Guo
2020-04-15 17:11     ` [dpdk-dev] [dpdk-dev v5 1/3] ethdev: add new RSS offload types Jeff Guo
2020-04-15 15:38       ` Iremonger, Bernard
2020-04-15 22:13         ` Ferruh Yigit
2020-04-16  3:22           ` Jeff Guo
2020-04-16  6:57       ` Ori Kam
2020-04-15 17:11     ` [dpdk-dev] [dpdk-dev v5 2/3] net/iavf: add RSS configuration for VFs Jeff Guo
2020-04-15 17:11     ` [dpdk-dev] [dpdk-dev v5 3/3] app/testpmd: add new types to RSS hash commands Jeff Guo
2020-04-15 15:01       ` Iremonger, Bernard
2020-04-16  7:51         ` Jeff Guo
2020-04-16  9:14           ` Iremonger, Bernard
2020-04-16 10:22             ` Jeff Guo
2020-04-16 19:19   ` [dpdk-dev] [dpdk-dev v6 0/3] add RSS configuration for iavf Jeff Guo
2020-04-16 19:19     ` [dpdk-dev] [dpdk-dev v6 1/3] ethdev: add new RSS offload types Jeff Guo
2020-04-16 19:19     ` [dpdk-dev] [dpdk-dev v6 2/3] net/iavf: add RSS configuration for VFs Jeff Guo
2020-04-16 19:19     ` [dpdk-dev] [dpdk-dev v6 3/3] app/testpmd: add new types to RSS hash commands Jeff Guo
2020-04-16 10:40       ` Ori Kam
2020-04-16 15:16         ` Jeff Guo
2020-04-16 11:16       ` Iremonger, Bernard
2020-04-16 15:15         ` Jeff Guo
2020-04-16 15:52           ` Ferruh Yigit
2020-04-17  1:50             ` Jeff Guo
2020-04-17 18:31   ` [dpdk-dev] [dpdk-dev v7 0/3] add RSS configuration for iavf Jeff Guo
2020-04-17 18:31     ` [dpdk-dev] [dpdk-dev v7 1/3] ethdev: add new RSS offload types Jeff Guo
2020-04-21 10:14       ` Iremonger, Bernard
2020-04-17 18:31     ` [dpdk-dev] [dpdk-dev v7 2/3] net/iavf: add RSS configuration for VFs Jeff Guo
2020-04-17 18:31     ` [dpdk-dev] [dpdk-dev v7 3/3] app/testpmd: add new types to RSS hash commands Jeff Guo
2020-04-19  6:53       ` Ori Kam
2020-04-21  9:44       ` Iremonger, Bernard
2020-04-21 12:37         ` Jeff Guo
2020-04-22  1:02   ` [dpdk-dev] [dpdk-dev v8 0/3] add RSS configuration for iavf Jeff Guo
2020-04-21 17:15     ` Ferruh Yigit
2020-04-22  1:02     ` [dpdk-dev] [dpdk-dev v8 1/3] ethdev: add new RSS offload types Jeff Guo
2020-04-21 17:15       ` Ferruh Yigit
2020-04-22  1:02     ` [dpdk-dev] [dpdk-dev v8 2/3] net/iavf: add RSS configuration for VFs Jeff Guo
2020-04-22  1:02     ` Jeff Guo [this message]
2020-04-21 14:29       ` [dpdk-dev] [dpdk-dev v8 3/3] app/testpmd: add new types to RSS hash commands Iremonger, Bernard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200422010255.76137-4-jia.guo@intel.com \
    --to=jia.guo@intel.com \
    --cc=beilei.xing@intel.com \
    --cc=bernard.iremonger@intel.com \
    --cc=dev@dpdk.org \
    --cc=jingjing.wu@intel.com \
    --cc=orika@mellanox.com \
    --cc=qi.z.zhang@intel.com \
    --cc=simei.su@intel.com \
    --cc=stephen@networkplumber.org \
    --cc=wenzhuo.lu@intel.com \
    --cc=xiaolong.ye@intel.com \
    --cc=yahui.cao@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).