From: Rasesh Mody <rmody@marvell.com>
To: <dev@dpdk.org>, <jerinj@marvell.com>, <ferruh.yigit@intel.com>
Cc: Rasesh Mody <rmody@marvell.com>,
<GR-Everest-DPDK-Dev@marvell.com>,
"Igor Russkikh" <irusskikh@marvell.com>
Subject: [dpdk-dev] [PATCH 2/2] net/qede: restore Tx queue setup
Date: Mon, 4 May 2020 20:09:43 -0700 [thread overview]
Message-ID: <20200505030943.1091-2-rmody@marvell.com> (raw)
In-Reply-To: <20200505030943.1091-1-rmody@marvell.com>
Some applications do not explicitly restore Tx queues setup during
port re-configuration. This patch adds changes to check for
released Tx queues and restore the setup if application doesn't
explicitly does that.
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
---
drivers/net/qede/qede_ethdev.h | 3 +++
drivers/net/qede/qede_rxtx.c | 25 ++++++++++++++++++++++++-
2 files changed, 27 insertions(+), 1 deletion(-)
diff --git a/drivers/net/qede/qede_ethdev.h b/drivers/net/qede/qede_ethdev.h
index b988a73f2..2e8e5febc 100644
--- a/drivers/net/qede/qede_ethdev.h
+++ b/drivers/net/qede/qede_ethdev.h
@@ -235,6 +235,9 @@ struct qede_dev {
bool enable_lro;
uint8_t num_rx_queues;
uint8_t num_tx_queues;
+ uint16_t num_rx_desc;
+ uint16_t num_tx_desc;
+ const struct rte_eth_txconf *tx_conf;
SLIST_HEAD(vlan_list_head, qede_vlan_entry)vlan_list_head;
uint16_t configured_vlans;
bool accept_any_vlan;
diff --git a/drivers/net/qede/qede_rxtx.c b/drivers/net/qede/qede_rxtx.c
index b81788ca4..1b212a4fb 100644
--- a/drivers/net/qede/qede_rxtx.c
+++ b/drivers/net/qede/qede_rxtx.c
@@ -151,6 +151,7 @@ qede_alloc_rx_queue_mem(struct rte_eth_dev *dev,
rxq->qdev = qdev;
rxq->mb_pool = mp;
rxq->nb_rx_desc = nb_desc;
+ qdev->num_rx_desc = rxq->nb_rx_desc;
rxq->queue_id = queue_idx;
rxq->port_id = dev->data->port_id;
@@ -405,6 +406,7 @@ qede_alloc_tx_queue_mem(struct rte_eth_dev *dev,
}
txq->nb_tx_desc = nb_desc;
+ qdev->num_tx_desc = txq->nb_tx_desc;
txq->qdev = qdev;
txq->port_id = dev->data->port_id;
@@ -443,6 +445,7 @@ qede_alloc_tx_queue_mem(struct rte_eth_dev *dev,
txq->nb_tx_avail = txq->nb_tx_desc;
+ qdev->tx_conf = tx_conf;
txq->tx_free_thresh =
tx_conf->tx_free_thresh ? tx_conf->tx_free_thresh :
(txq->nb_tx_desc - QEDE_DEFAULT_TX_FREE_THRESH);
@@ -593,7 +596,7 @@ qede_alloc_mem_sb(struct qede_dev *qdev, struct ecore_sb_info *sb_info,
int qede_alloc_fp_resc(struct qede_dev *qdev)
{
- struct ecore_dev *edev = &qdev->edev;
+ struct ecore_dev *edev = QEDE_INIT_EDEV(qdev);
struct qede_fastpath *fp;
uint32_t num_sbs;
uint16_t sb_idx;
@@ -1005,9 +1008,29 @@ static int qede_tx_queue_stop(struct rte_eth_dev *eth_dev, uint16_t tx_queue_id)
int qede_start_queues(struct rte_eth_dev *eth_dev)
{
struct qede_dev *qdev = QEDE_INIT_QDEV(eth_dev);
+ struct ecore_dev *edev = QEDE_INIT_EDEV(qdev);
+ struct qede_tx_queue *txq;
+ struct qede_fastpath *fp;
uint8_t id;
int rc = -1;
+ /* Restore setup of Tx queues */
+ for (id = 0; id < qdev->num_tx_queues; id++) {
+ fp = &qdev->fp_array[id];
+ txq = fp->txq;
+
+ if (!txq) {
+ rc = qede_tx_queue_setup(eth_dev, id, qdev->num_tx_desc,
+ eth_dev->data->numa_node,
+ qdev->tx_conf);
+ if (rc != ECORE_SUCCESS) {
+ DP_ERR(edev, "TX queue %u not setup rc=%d\n",
+ id, rc);
+ return -1;
+ }
+ }
+ }
+
for (id = 0; id < qdev->num_rx_queues; id++) {
rc = qede_rx_queue_start(eth_dev, id);
if (rc != ECORE_SUCCESS)
--
2.18.0
next prev parent reply other threads:[~2020-05-05 3:09 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-05 3:09 [dpdk-dev] [PATCH 1/2] net/qede: fix assignment of Rx/Tx handlers Rasesh Mody
2020-05-05 3:09 ` Rasesh Mody [this message]
2020-05-05 6:44 ` [dpdk-dev] [PATCH 2/2] net/qede: restore Tx queue setup Jerin Jacob
2020-05-05 8:59 ` Ferruh Yigit
2020-05-05 9:15 ` Thomas Monjalon
2020-05-06 2:43 ` [dpdk-dev] [EXT] " Rasesh Mody
2020-05-10 7:04 ` Jerin Jacob
2020-05-14 4:10 ` Rasesh Mody
2020-05-14 7:56 ` Jerin Jacob
2020-05-14 14:32 ` Ferruh Yigit
2020-05-14 22:43 ` Rasesh Mody
2020-05-15 10:39 ` Ferruh Yigit
2020-05-05 9:01 ` [dpdk-dev] [PATCH 1/2] net/qede: fix assignment of Rx/Tx handlers Ferruh Yigit
2020-05-06 2:34 ` [dpdk-dev] [EXT] " Rasesh Mody
2020-05-14 4:09 ` [dpdk-dev] [PATCH v2 " Rasesh Mody
2020-05-14 4:09 ` [dpdk-dev] [PATCH v2 2/2] examples/kni: fix MTU change to setup Tx queue Rasesh Mody
2020-05-14 15:33 ` Ferruh Yigit
2020-05-15 11:29 ` Ferruh Yigit
2020-05-19 16:31 ` Thomas Monjalon
2020-05-15 6:34 ` [dpdk-dev] [PATCH v3 1/2] net/qede: fix assignment of Rx/Tx handlers Rasesh Mody
2020-05-15 12:26 ` Jerin Jacob
2020-05-15 6:34 ` [dpdk-dev] [PATCH v3 2/2] net/qede: fix port reconfiguration Rasesh Mody
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200505030943.1091-2-rmody@marvell.com \
--to=rmody@marvell.com \
--cc=GR-Everest-DPDK-Dev@marvell.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
--cc=irusskikh@marvell.com \
--cc=jerinj@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).