From: Muhammad Bilal <m.bilal@emumba.com>
To: bruce.richardson@intel.com
Cc: dev@dpdk.org, Muhammad Bilal <m.bilal@emumba.com>,
stable@dpdk.org, vipin.varghese@intel.com, jgrajcia@cisco.com
Subject: [dpdk-dev] [PATCH] examples/l2fwd/main.c: free resources in case of error
Date: Mon, 11 May 2020 16:28:31 +0500 [thread overview]
Message-ID: <20200511112831.25549-1-m.bilal@emumba.com> (raw)
Bugzilla ID: 437
Cc: dev@dpdk.org
Cc: stable@dpdk.org
Cc: bruce.richardson@intel.com
Cc: vipin.varghese@intel.com
Cc: jgrajcia@cisco.com
Signed-off-by: Muhammad Bilal <m.bilal@emumba.com>
---
examples/l2fwd/main.c | 72 ++++++++++++++++++++++++++++++++++---------
1 file changed, 57 insertions(+), 15 deletions(-)
diff --git a/examples/l2fwd/main.c b/examples/l2fwd/main.c
index 88ddfe589..dbaa457e2 100644
--- a/examples/l2fwd/main.c
+++ b/examples/l2fwd/main.c
@@ -517,6 +517,17 @@ signal_handler(int signum)
}
}
+static void
+stop_and_close_eth_dev(uint16_t portid)
+{
+ RTE_ETH_FOREACH_DEV(portid) {
+ printf("Closing port %d...", portid);
+ rte_eth_dev_stop(portid);
+ rte_eth_dev_close(portid);
+ printf(" Done\n");
+ }
+}
+
int
main(int argc, char **argv)
{
@@ -543,8 +554,10 @@ main(int argc, char **argv)
/* parse application arguments (after the EAL ones) */
ret = l2fwd_parse_args(argc, argv);
- if (ret < 0)
+ if (ret < 0) {
+ stop_and_close_eth_dev(portid);
rte_exit(EXIT_FAILURE, "Invalid L2FWD arguments\n");
+ }
printf("MAC updating %s\n", mac_updating ? "enabled" : "disabled");
@@ -552,13 +565,17 @@ main(int argc, char **argv)
timer_period *= rte_get_timer_hz();
nb_ports = rte_eth_dev_count_avail();
- if (nb_ports == 0)
+ if (nb_ports == 0) {
+ stop_and_close_eth_dev(portid);
rte_exit(EXIT_FAILURE, "No Ethernet ports - bye\n");
+ }
/* check port mask to possible port mask */
- if (l2fwd_enabled_port_mask & ~((1 << nb_ports) - 1))
+ if (l2fwd_enabled_port_mask & ~((1 << nb_ports) - 1)) {
+ stop_and_close_eth_dev(portid);
rte_exit(EXIT_FAILURE, "Invalid portmask; possible (0x%x)\n",
(1 << nb_ports) - 1);
+ }
/* reset l2fwd_dst_ports */
for (portid = 0; portid < RTE_MAX_ETHPORTS; portid++)
@@ -601,8 +618,10 @@ main(int argc, char **argv)
lcore_queue_conf[rx_lcore_id].n_rx_port ==
l2fwd_rx_queue_per_lcore) {
rx_lcore_id++;
- if (rx_lcore_id >= RTE_MAX_LCORE)
+ if (rx_lcore_id >= RTE_MAX_LCORE) {
+ stop_and_close_eth_dev(portid);
rte_exit(EXIT_FAILURE, "Not enough cores\n");
+ }
}
if (qconf != &lcore_queue_conf[rx_lcore_id]) {
@@ -623,8 +642,10 @@ main(int argc, char **argv)
l2fwd_pktmbuf_pool = rte_pktmbuf_pool_create("mbuf_pool", nb_mbufs,
MEMPOOL_CACHE_SIZE, 0, RTE_MBUF_DEFAULT_BUF_SIZE,
rte_socket_id());
- if (l2fwd_pktmbuf_pool == NULL)
+ if (l2fwd_pktmbuf_pool == NULL) {
+ stop_and_close_eth_dev(portid);
rte_exit(EXIT_FAILURE, "Cannot init mbuf pool\n");
+ }
/* Initialise each port */
RTE_ETH_FOREACH_DEV(portid) {
@@ -645,32 +666,40 @@ main(int argc, char **argv)
fflush(stdout);
ret = rte_eth_dev_info_get(portid, &dev_info);
- if (ret != 0)
+ if (ret != 0) {
+ stop_and_close_eth_dev(portid);
rte_exit(EXIT_FAILURE,
"Error during getting device (port %u) info: %s\n",
portid, strerror(-ret));
+ }
if (dev_info.tx_offload_capa & DEV_TX_OFFLOAD_MBUF_FAST_FREE)
local_port_conf.txmode.offloads |=
DEV_TX_OFFLOAD_MBUF_FAST_FREE;
ret = rte_eth_dev_configure(portid, 1, 1, &local_port_conf);
- if (ret < 0)
+ if (ret < 0) {
+ stop_and_close_eth_dev(portid);
rte_exit(EXIT_FAILURE, "Cannot configure device: err=%d, port=%u\n",
ret, portid);
+ }
ret = rte_eth_dev_adjust_nb_rx_tx_desc(portid, &nb_rxd,
&nb_txd);
- if (ret < 0)
+ if (ret < 0) {
+ stop_and_close_eth_dev(portid);
rte_exit(EXIT_FAILURE,
"Cannot adjust number of descriptors: err=%d, port=%u\n",
ret, portid);
+ }
ret = rte_eth_macaddr_get(portid,
&l2fwd_ports_eth_addr[portid]);
- if (ret < 0)
+ if (ret < 0) {
+ stop_and_close_eth_dev(portid);
rte_exit(EXIT_FAILURE,
"Cannot get MAC address: err=%d, port=%u\n",
ret, portid);
+ }
/* init one RX queue */
fflush(stdout);
@@ -680,9 +709,11 @@ main(int argc, char **argv)
rte_eth_dev_socket_id(portid),
&rxq_conf,
l2fwd_pktmbuf_pool);
- if (ret < 0)
+ if (ret < 0) {
+ stop_and_close_eth_dev(portid);
rte_exit(EXIT_FAILURE, "rte_eth_rx_queue_setup:err=%d, port=%u\n",
ret, portid);
+ }
/* init one TX queue on each port */
fflush(stdout);
@@ -691,27 +722,33 @@ main(int argc, char **argv)
ret = rte_eth_tx_queue_setup(portid, 0, nb_txd,
rte_eth_dev_socket_id(portid),
&txq_conf);
- if (ret < 0)
+ if (ret < 0) {
+ stop_and_close_eth_dev(portid);
rte_exit(EXIT_FAILURE, "rte_eth_tx_queue_setup:err=%d, port=%u\n",
ret, portid);
+ }
/* Initialize TX buffers */
tx_buffer[portid] = rte_zmalloc_socket("tx_buffer",
RTE_ETH_TX_BUFFER_SIZE(MAX_PKT_BURST), 0,
rte_eth_dev_socket_id(portid));
- if (tx_buffer[portid] == NULL)
+ if (tx_buffer[portid] == NULL) {
+ stop_and_close_eth_dev(portid);
rte_exit(EXIT_FAILURE, "Cannot allocate buffer for tx on port %u\n",
portid);
+ }
rte_eth_tx_buffer_init(tx_buffer[portid], MAX_PKT_BURST);
ret = rte_eth_tx_buffer_set_err_callback(tx_buffer[portid],
rte_eth_tx_buffer_count_callback,
&port_statistics[portid].dropped);
- if (ret < 0)
+ if (ret < 0) {
+ stop_and_close_eth_dev(portid);
rte_exit(EXIT_FAILURE,
"Cannot set error callback for tx buffer on port %u\n",
portid);
+ }
ret = rte_eth_dev_set_ptypes(portid, RTE_PTYPE_UNKNOWN, NULL,
0);
@@ -720,17 +757,21 @@ main(int argc, char **argv)
portid);
/* Start device */
ret = rte_eth_dev_start(portid);
- if (ret < 0)
+ if (ret < 0) {
+ stop_and_close_eth_dev(portid);
rte_exit(EXIT_FAILURE, "rte_eth_dev_start:err=%d, port=%u\n",
ret, portid);
+ }
printf("done: \n");
ret = rte_eth_promiscuous_enable(portid);
- if (ret != 0)
+ if (ret != 0) {
+ stop_and_close_eth_dev(portid);
rte_exit(EXIT_FAILURE,
"rte_eth_promiscuous_enable:err=%s, port=%u\n",
rte_strerror(-ret), portid);
+ }
printf("Port %u, MAC address: %02X:%02X:%02X:%02X:%02X:%02X\n\n",
portid,
@@ -746,6 +787,7 @@ main(int argc, char **argv)
}
if (!nb_ports_available) {
+ stop_and_close_eth_dev(portid);
rte_exit(EXIT_FAILURE,
"All available ports are disabled. Please set portmask.\n");
}
--
2.17.1
next reply other threads:[~2020-05-11 11:33 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-11 11:28 Muhammad Bilal [this message]
2020-05-12 4:49 ` Varghese, Vipin
2020-05-12 5:44 ` Jerin Jacob
2020-05-12 13:56 ` [dpdk-dev] [PATCH v2] examples/l2fwd: " Muhammad Bilal
2020-06-05 12:01 ` Muhammad Bilal
2023-06-12 21:18 ` Stephen Hemminger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200511112831.25549-1-m.bilal@emumba.com \
--to=m.bilal@emumba.com \
--cc=bruce.richardson@intel.com \
--cc=dev@dpdk.org \
--cc=jgrajcia@cisco.com \
--cc=stable@dpdk.org \
--cc=vipin.varghese@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).