From: Hemant Agrawal <hemant.agrawal@nxp.com>
To: dev@dpdk.org
Cc: ferruh.yigit@intel.com, Apeksha Gupta <apeksha.gupta@nxp.com>
Subject: [dpdk-dev] [PATCH 3/9] net/dpaa: add Tx/Rx burst mode info
Date: Fri, 10 Jul 2020 21:51:31 +0530 [thread overview]
Message-ID: <20200710162137.22973-3-hemant.agrawal@nxp.com> (raw)
In-Reply-To: <20200710162137.22973-1-hemant.agrawal@nxp.com>
From: Apeksha Gupta <apeksha.gupta@nxp.com>
Retrieve burst mode information according to the selected Rx/Tx mode
and offloads.
Signed-off-by: Apeksha Gupta <apeksha.gupta@nxp.com>
---
doc/guides/nics/features/dpaa.ini | 1 +
drivers/net/dpaa/dpaa_ethdev.c | 70 ++++++++++++++++++++++++++++++-
2 files changed, 70 insertions(+), 1 deletion(-)
diff --git a/doc/guides/nics/features/dpaa.ini b/doc/guides/nics/features/dpaa.ini
index 816a6e08e..e0ed3e868 100644
--- a/doc/guides/nics/features/dpaa.ini
+++ b/doc/guides/nics/features/dpaa.ini
@@ -7,6 +7,7 @@
Speed capabilities = Y
Link status = Y
Link status event = Y
+Burst mode info = Y
Jumbo frame = Y
MTU update = Y
Scattered Rx = Y
diff --git a/drivers/net/dpaa/dpaa_ethdev.c b/drivers/net/dpaa/dpaa_ethdev.c
index 3a5b319d4..62ecb112f 100644
--- a/drivers/net/dpaa/dpaa_ethdev.c
+++ b/drivers/net/dpaa/dpaa_ethdev.c
@@ -457,6 +457,73 @@ static int dpaa_eth_dev_info(struct rte_eth_dev *dev,
return 0;
}
+static int
+dpaa_dev_rx_burst_mode_get(struct rte_eth_dev *dev,
+ __rte_unused uint16_t queue_id,
+ struct rte_eth_burst_mode *mode)
+{
+ struct rte_eth_conf *eth_conf = &dev->data->dev_conf;
+ int ret = -EINVAL;
+ unsigned int i;
+ const struct burst_info {
+ uint64_t flags;
+ const char *output;
+ } rx_offload_map[] = {
+ {DEV_RX_OFFLOAD_JUMBO_FRAME, " Jumbo frame,"},
+ {DEV_RX_OFFLOAD_SCATTER, " Scattered,"},
+ {DEV_RX_OFFLOAD_IPV4_CKSUM, " IPV4 csum,"},
+ {DEV_RX_OFFLOAD_UDP_CKSUM, " UDP csum,"},
+ {DEV_RX_OFFLOAD_TCP_CKSUM, " TCP csum,"},
+ {DEV_RX_OFFLOAD_OUTER_IPV4_CKSUM, " Outer IPV4 csum,"},
+ {DEV_RX_OFFLOAD_RSS_HASH, " RSS,"}
+ };
+
+ /* Update Rx offload info */
+ for (i = 0; i < RTE_DIM(rx_offload_map); i++) {
+ if (eth_conf->rxmode.offloads & rx_offload_map[i].flags) {
+ snprintf(mode->info, sizeof(mode->info), "%s",
+ rx_offload_map[i].output);
+ ret = 0;
+ break;
+ }
+ }
+ return ret;
+}
+
+static int
+dpaa_dev_tx_burst_mode_get(struct rte_eth_dev *dev,
+ __rte_unused uint16_t queue_id,
+ struct rte_eth_burst_mode *mode)
+{
+ struct rte_eth_conf *eth_conf = &dev->data->dev_conf;
+ int ret = -EINVAL;
+ unsigned int i;
+ const struct burst_info {
+ uint64_t flags;
+ const char *output;
+ } tx_offload_map[] = {
+ {DEV_TX_OFFLOAD_MT_LOCKFREE, " MT lockfree,"},
+ {DEV_TX_OFFLOAD_MBUF_FAST_FREE, " MBUF free disable,"},
+ {DEV_TX_OFFLOAD_IPV4_CKSUM, " IPV4 csum,"},
+ {DEV_TX_OFFLOAD_UDP_CKSUM, " UDP csum,"},
+ {DEV_TX_OFFLOAD_TCP_CKSUM, " TCP csum,"},
+ {DEV_TX_OFFLOAD_SCTP_CKSUM, " SCTP csum,"},
+ {DEV_TX_OFFLOAD_OUTER_IPV4_CKSUM, " Outer IPV4 csum,"},
+ {DEV_TX_OFFLOAD_MULTI_SEGS, " Scattered,"}
+ };
+
+ /* Update Tx offload info */
+ for (i = 0; i < RTE_DIM(tx_offload_map); i++) {
+ if (eth_conf->txmode.offloads & tx_offload_map[i].flags) {
+ snprintf(mode->info, sizeof(mode->info), "%s",
+ tx_offload_map[i].output);
+ ret = 0;
+ break;
+ }
+ }
+ return ret;
+}
+
static int dpaa_eth_link_update(struct rte_eth_dev *dev,
int wait_to_complete __rte_unused)
{
@@ -1182,7 +1249,8 @@ static struct eth_dev_ops dpaa_devops = {
.rx_queue_release = dpaa_eth_rx_queue_release,
.tx_queue_release = dpaa_eth_tx_queue_release,
.rx_queue_count = dpaa_dev_rx_queue_count,
-
+ .rx_burst_mode_get = dpaa_dev_rx_burst_mode_get,
+ .tx_burst_mode_get = dpaa_dev_tx_burst_mode_get,
.flow_ctrl_get = dpaa_flow_ctrl_get,
.flow_ctrl_set = dpaa_flow_ctrl_set,
--
2.17.1
next prev parent reply other threads:[~2020-07-10 16:26 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-10 16:21 [dpdk-dev] [PATCH 1/9] net/dpaa2: remove Rx timestamp enable PMD API Hemant Agrawal
2020-07-10 16:21 ` [dpdk-dev] [PATCH 2/9] net/dpaa2: support per port Rx mbuf timestamp Hemant Agrawal
2020-07-10 16:21 ` Hemant Agrawal [this message]
2020-07-10 16:21 ` [dpdk-dev] [PATCH 4/9] net/dpaa2: add Tx/Rx burst mode info Hemant Agrawal
2020-07-10 16:21 ` [dpdk-dev] [PATCH 5/9] net/dpaa: report error on using deferred start Hemant Agrawal
2020-07-10 16:21 ` [dpdk-dev] [PATCH 6/9] net/dpaa2: report error on queue " Hemant Agrawal
2020-07-10 16:21 ` [dpdk-dev] [PATCH 7/9] net/dpaa2: add support to use Tx Queue desc size Hemant Agrawal
2020-07-10 16:21 ` [dpdk-dev] [PATCH 8/9] net/dpaa2: support Rxq and Txq info routines Hemant Agrawal
2020-07-10 16:21 ` [dpdk-dev] [PATCH 9/9] net/dpaa: " Hemant Agrawal
2020-07-21 1:32 ` [dpdk-dev] [PATCH 1/9] net/dpaa2: remove Rx timestamp enable PMD API Ferruh Yigit
2020-07-21 3:26 ` Hemant Agrawal
2020-07-21 8:56 ` Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200710162137.22973-3-hemant.agrawal@nxp.com \
--to=hemant.agrawal@nxp.com \
--cc=apeksha.gupta@nxp.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).