DPDK patches and discussions
 help / color / mirror / Atom feed
From: nipun.gupta@nxp.com
To: dev@dpdk.org
Cc: thomas@monjalon.net, ferruh.yigit@intel.com,
	arybchenko@solarflare.com, hemant.agrawal@nxp.com,
	sachin.saxena@nxp.com, rohit.raj@nxp.com, jerinjacobk@gmail.com,
	stephen@networkplumber.org, asafp@nvidia.com,
	Nipun Gupta <nipun.gupta@nxp.com>
Subject: [dpdk-dev] [PATCH 3/3 v3] app/testpmd: support hardware offload to drop error packets
Date: Fri,  9 Oct 2020 18:43:31 +0530	[thread overview]
Message-ID: <20201009131331.5897-3-nipun.gupta@nxp.com> (raw)
In-Reply-To: <20201009131331.5897-1-nipun.gupta@nxp.com>

From: Nipun Gupta <nipun.gupta@nxp.com>

With DEV_RX_OFFLOAD_ERR_PKT_DROP now defined as an offload
capability, and separate DEV_RX_ERR_PKT_DROP_OFFLOAD_ALL capability
to drop all error packets in hardware, testpmd showcases this
with a new added configuration option 'enable-hw-drop-err-all'.

Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
---
 app/test-pmd/parameters.c             | 7 +++++++
 app/test-pmd/testpmd.c                | 8 ++++++++
 app/test-pmd/testpmd.h                | 1 +
 doc/guides/testpmd_app_ug/run_app.rst | 4 ++++
 4 files changed, 20 insertions(+)

diff --git a/app/test-pmd/parameters.c b/app/test-pmd/parameters.c
index 1ead59579..508612426 100644
--- a/app/test-pmd/parameters.c
+++ b/app/test-pmd/parameters.c
@@ -142,6 +142,7 @@ usage(char* progname)
 	printf("  --enable-hw-vlan-strip: enable hardware vlan strip.\n");
 	printf("  --enable-hw-vlan-extend: enable hardware vlan extend.\n");
 	printf("  --enable-hw-qinq-strip: enable hardware qinq strip.\n");
+	printf("  --enable-hw-drop-err-all: enable hardware packet drop for all error packets.\n");
 	printf("  --enable-drop-en: enable per queue packet drop.\n");
 	printf("  --disable-rss: disable rss.\n");
 	printf("  --port-topology=<paired|chained|loop>: set port topology (paired "
@@ -631,6 +632,7 @@ launch_args_parse(int argc, char** argv)
 		{ "enable-hw-vlan-strip",       0, 0, 0 },
 		{ "enable-hw-vlan-extend",      0, 0, 0 },
 		{ "enable-hw-qinq-strip",       0, 0, 0 },
+		{ "enable-hw-drop-err-all",     0, 0, 0 },
 		{ "enable-drop-en",            0, 0, 0 },
 		{ "disable-rss",                0, 0, 0 },
 		{ "port-topology",              1, 0, 0 },
@@ -1283,6 +1285,11 @@ launch_args_parse(int argc, char** argv)
 				rmv_interrupt = 0;
 			if (!strcmp(lgopts[opt_idx].name, "flow-isolate-all"))
 				flow_isolate_all = 1;
+			if (!strcmp(lgopts[opt_idx].name,
+					"enable-hw-drop-err-all")) {
+				rx_err_pkt_drop_all = 1;
+			}
+
 			if (!strcmp(lgopts[opt_idx].name, "tx-offloads")) {
 				char *end = NULL;
 				n = strtoull(optarg, &end, 16);
diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c
index ccba71c07..c9e7397e6 100644
--- a/app/test-pmd/testpmd.c
+++ b/app/test-pmd/testpmd.c
@@ -359,6 +359,11 @@ uint8_t lsc_interrupt = 1; /* enabled by default */
  */
 uint8_t rmv_interrupt = 1; /* enabled by default */
 
+/*
+ * Drop all RX error packets on HW itself.
+ */
+uint8_t rx_err_pkt_drop_all = 0; /* disabled by default */
+
 uint8_t hot_plug = 0; /**< hotplug disabled by default. */
 
 /* After attach, port setup is called on event or by iterator */
@@ -3359,6 +3364,9 @@ init_port_config(void)
 		    (rte_eth_devices[pid].data->dev_flags &
 		     RTE_ETH_DEV_INTR_RMV))
 			port->dev_conf.intr_conf.rmv = 1;
+
+		if (rx_err_pkt_drop_all)
+			port->dev_conf.err_pkt_drop_conf.all = 1;
 	}
 }
 
diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
index c7e7e41a9..eab154ed4 100644
--- a/app/test-pmd/testpmd.h
+++ b/app/test-pmd/testpmd.h
@@ -314,6 +314,7 @@ extern uint8_t no_device_start; /**<set by "--disable-device-start" parameter */
 extern volatile int test_done; /* stop packet forwarding when set to 1. */
 extern uint8_t lsc_interrupt; /**< disabled by "--no-lsc-interrupt" parameter */
 extern uint8_t rmv_interrupt; /**< disabled by "--no-rmv-interrupt" parameter */
+extern uint8_t rx_err_pkt_drop_all; /**< enabled by "--enable-hw-drop-err-all" parameter */
 extern uint32_t event_print_mask;
 /**< set by "--print-event xxxx" and "--mask-event xxxx parameters */
 extern bool setup_on_probe_event; /**< disabled by port setup-on iterator */
diff --git a/doc/guides/testpmd_app_ug/run_app.rst b/doc/guides/testpmd_app_ug/run_app.rst
index e2539f693..20f2f8083 100644
--- a/doc/guides/testpmd_app_ug/run_app.rst
+++ b/doc/guides/testpmd_app_ug/run_app.rst
@@ -213,6 +213,10 @@ The command line options are:
 
     Enable hardware QINQ strip.
 
+*  ``--enable-hw-drop-err-all``
+
+    Enable hardware packet drop for any error packets
+
 *   ``--enable-drop-en``
 
     Enable per-queue packet drop for packets with no descriptors.
-- 
2.17.1


  parent reply	other threads:[~2020-10-09 13:14 UTC|newest]

Thread overview: 46+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-08-31  7:53 [dpdk-dev] [PATCH] ethdev: add rx " Nipun Gupta
2020-08-31 12:58 ` Ferruh Yigit
2020-08-31 16:04   ` Nipun Gupta
2020-08-31 17:00 ` Stephen Hemminger
2020-09-01  8:09   ` Thomas Monjalon
2020-09-01 10:56     ` Nipun Gupta
2020-09-21  7:29     ` Ori Kam
2020-10-05  7:15 ` [dpdk-dev] [PATCH 1/3 v2] " nipun.gupta
2020-10-05  7:15   ` [dpdk-dev] [PATCH 2/3 v2] net/dpaa: support RX offload for error packet drop nipun.gupta
2020-10-05  7:15   ` [dpdk-dev] [PATCH 3/3 v2] testpmd: support hardware offload to drop error packets nipun.gupta
2020-10-08 15:06     ` Asaf Penso
2020-10-08 15:45       ` Nipun Gupta
2020-10-05 15:34   ` [dpdk-dev] [PATCH 1/3 v2] ethdev: add rx " Stephen Hemminger
2020-10-05 16:10     ` Jerin Jacob
2020-10-06 10:37       ` Nipun Gupta
2020-10-06 12:01         ` Jerin Jacob
2020-10-06 13:10           ` Nipun Gupta
2020-10-06 13:13             ` Jerin Jacob
2020-10-08  8:53               ` Nipun Gupta
2020-10-08  8:55                 ` Jerin Jacob
2020-10-08 15:13                   ` Asaf Penso
2020-10-09 13:13 ` [dpdk-dev] [PATCH 1/3 v3] " nipun.gupta
2020-10-09 13:13   ` [dpdk-dev] [PATCH 2/3 v3] net/dpaa: support RX offload for error packet drop nipun.gupta
2020-10-09 13:13   ` nipun.gupta [this message]
2020-10-11  7:22     ` [dpdk-dev] [PATCH 3/3 v3] app/testpmd: support hardware offload to drop error packets Asaf Penso
2020-10-11 10:13   ` [dpdk-dev] [PATCH 1/3 v3] ethdev: add rx " Jerin Jacob
2020-10-11 21:41   ` Thomas Monjalon
2020-10-12  5:40     ` Nipun Gupta
2020-10-13  7:22       ` Nipun Gupta
2020-10-12  8:01   ` Andrew Rybchenko
2020-10-12 11:30     ` Nipun Gupta
2020-10-12 12:22       ` Andrew Rybchenko
2020-10-12 12:53         ` Nipun Gupta
2020-10-13  7:21         ` Andrew Rybchenko
2020-10-13  7:36           ` Nipun Gupta
2020-10-13  7:51             ` Andrew Rybchenko
2020-10-13  8:12               ` Nipun Gupta
2020-10-15 13:23 ` [dpdk-dev] [PATCH 1/3 v4] ethdev: add Rx " nipun.gupta
2020-10-15 13:23   ` [dpdk-dev] [PATCH 2/3 v4] net/dpaa: support Rx offload for error packet drop nipun.gupta
2020-10-15 13:23   ` [dpdk-dev] [PATCH 3/3 v4] app/testpmd: support hardware offload to drop error packets nipun.gupta
2020-10-29 17:22     ` Dharmik Thakkar
2020-10-31 18:16       ` Nipun Gupta
2020-10-19  3:30   ` [dpdk-dev] [PATCH 1/3 v4] ethdev: add Rx " Ajit Khaparde
2021-02-18 20:32   ` Ferruh Yigit
2021-02-18 20:37     ` Thomas Monjalon
2021-04-20  1:11       ` Ferruh Yigit

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201009131331.5897-3-nipun.gupta@nxp.com \
    --to=nipun.gupta@nxp.com \
    --cc=arybchenko@solarflare.com \
    --cc=asafp@nvidia.com \
    --cc=dev@dpdk.org \
    --cc=ferruh.yigit@intel.com \
    --cc=hemant.agrawal@nxp.com \
    --cc=jerinjacobk@gmail.com \
    --cc=rohit.raj@nxp.com \
    --cc=sachin.saxena@nxp.com \
    --cc=stephen@networkplumber.org \
    --cc=thomas@monjalon.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).