* [dpdk-dev] [PATCH v1] net/i40e: fix qinq flow pattern to allow non full mask
@ 2020-10-13 13:57 Padraig Connolly
2020-10-14 10:34 ` Iremonger, Bernard
0 siblings, 1 reply; 2+ messages in thread
From: Padraig Connolly @ 2020-10-13 13:57 UTC (permalink / raw)
To: beilei.xing; +Cc: dev, Padraig Connolly, bernard.iremonger
Issue reported by customer that only full mask was allowed on inner and outer
VLAN tag, thus not allowing mask to set VLAN ID filter only. Removed check that
enforces inner vlan and outer vlan equal I40E_TCI_MASK (full mask 0xffff).
Fixes: c2be7f9b232f ("net/i40e: fix parsing QinQ pattern")
Fixes: d37705068ee8 ("net/i40e: parse QinQ pattern")
Cc: bernard.iremonger@intel.com
Cc:stable@dpdk.org
Signed-off-by: Padraig Connolly <padraig.j.connolly@intel.com>
---
drivers/net/i40e/i40e_flow.c | 7 +------
1 file changed, 1 insertion(+), 6 deletions(-)
diff --git a/drivers/net/i40e/i40e_flow.c b/drivers/net/i40e/i40e_flow.c
index adc5da1c5..509c18c45 100644
--- a/drivers/net/i40e/i40e_flow.c
+++ b/drivers/net/i40e/i40e_flow.c
@@ -4649,14 +4649,9 @@ i40e_flow_parse_qinq_pattern(__rte_unused struct rte_eth_dev *dev,
}
/* Get filter specification */
- if ((o_vlan_mask != NULL) && (o_vlan_mask->tci ==
- rte_cpu_to_be_16(I40E_TCI_MASK)) &&
- (i_vlan_mask != NULL) &&
- (i_vlan_mask->tci == rte_cpu_to_be_16(I40E_TCI_MASK))) {
+ if ((o_vlan_mask != NULL) && (i_vlan_mask != NULL)) {
filter->outer_vlan = rte_be_to_cpu_16(o_vlan_spec->tci)
- & I40E_TCI_MASK;
filter->inner_vlan = rte_be_to_cpu_16(i_vlan_spec->tci)
- & I40E_TCI_MASK;
} else {
rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ITEM,
--
2.17.1
--------------------------------------------------------------
Intel Research and Development Ireland Limited
Registered in Ireland
Registered Office: Collinstown Industrial Park, Leixlip, County Kildare
Registered Number: 308263
This e-mail and any attachments may contain confidential material for the sole
use of the intended recipient(s). Any review or distribution by others is
strictly prohibited. If you are not the intended recipient, please contact the
sender and delete all copies.
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [dpdk-dev] [PATCH v1] net/i40e: fix qinq flow pattern to allow non full mask
2020-10-13 13:57 [dpdk-dev] [PATCH v1] net/i40e: fix qinq flow pattern to allow non full mask Padraig Connolly
@ 2020-10-14 10:34 ` Iremonger, Bernard
0 siblings, 0 replies; 2+ messages in thread
From: Iremonger, Bernard @ 2020-10-14 10:34 UTC (permalink / raw)
To: Connolly, Padraig J; +Cc: dev, Xing, Beilei
Hi Padraig,
> -----Original Message-----
> From: Connolly, Padraig J <padraig.j.connolly@intel.com>
> Sent: Tuesday, October 13, 2020 2:58 PM
> To: Xing, Beilei <beilei.xing@intel.com>
> Cc: dev@dpdk.org; Connolly, Padraig J <padraig.j.connolly@intel.com>;
> Iremonger, Bernard <bernard.iremonger@intel.com>
> Subject: [PATCH v1] net/i40e: fix qinq flow pattern to allow non full mask
>
> Issue reported by customer that only full mask was allowed on inner and
> outer VLAN tag, thus not allowing mask to set VLAN ID filter only. Removed
> check that enforces inner vlan and outer vlan equal I40E_TCI_MASK (full
> mask 0xffff).
>
> Fixes: c2be7f9b232f ("net/i40e: fix parsing QinQ pattern")
> Fixes: d37705068ee8 ("net/i40e: parse QinQ pattern")
>
> Cc: bernard.iremonger@intel.com
> Cc:stable@dpdk.org
>
> Signed-off-by: Padraig Connolly <padraig.j.connolly@intel.com>
> ---
> drivers/net/i40e/i40e_flow.c | 7 +------
> 1 file changed, 1 insertion(+), 6 deletions(-)
>
> diff --git a/drivers/net/i40e/i40e_flow.c b/drivers/net/i40e/i40e_flow.c
> index adc5da1c5..509c18c45 100644
> --- a/drivers/net/i40e/i40e_flow.c
> +++ b/drivers/net/i40e/i40e_flow.c
> @@ -4649,14 +4649,9 @@ i40e_flow_parse_qinq_pattern(__rte_unused
> struct rte_eth_dev *dev,
> }
>
> /* Get filter specification */
> - if ((o_vlan_mask != NULL) && (o_vlan_mask->tci ==
> - rte_cpu_to_be_16(I40E_TCI_MASK)) &&
> - (i_vlan_mask != NULL) &&
> - (i_vlan_mask->tci ==
> rte_cpu_to_be_16(I40E_TCI_MASK))) {
> + if ((o_vlan_mask != NULL) && (i_vlan_mask != NULL)) {
> filter->outer_vlan = rte_be_to_cpu_16(o_vlan_spec->tci)
> - & I40E_TCI_MASK;
> filter->inner_vlan = rte_be_to_cpu_16(i_vlan_spec->tci)
> - & I40E_TCI_MASK;
> } else {
> rte_flow_error_set(error, EINVAL,
> RTE_FLOW_ERROR_TYPE_ITEM,
> --
> 2.17.1
Checkpatch is showing the following warnings which should be fixed.
:~/dpdk_20_11/devtools# ./checkpatches.sh /home/bairemon/patches_patchwork_20_11/v1-net-i40e-fix-qinq-flow-pattern-to-allow-non-full-mask.patch
### [dpdk-dev] [PATCH v1] net/i40e: fix qinq flow pattern to allow non full mask
WARNING:COMMIT_LOG_LONG_LINE: Possible unwrapped commit description (prefer a maximum 75 chars per line)
#60:
Issue reported by customer that only full mask was allowed on inner and outer
WARNING:BAD_SIGN_OFF: Use a single space after Cc:
#68:
Cc:stable@dpdk.org
CHECK:UNNECESSARY_PARENTHESES: Unnecessary parentheses around 'o_vlan_mask != NULL'
#87: FILE: drivers/net/i40e/i40e_flow.c:4652:
+ if ((o_vlan_mask != NULL) && (i_vlan_mask != NULL)) {
CHECK:UNNECESSARY_PARENTHESES: Unnecessary parentheses around 'i_vlan_mask != NULL'
#87: FILE: drivers/net/i40e/i40e_flow.c:4652:
+ if ((o_vlan_mask != NULL) && (i_vlan_mask != NULL)) {
total: 0 errors, 2 warnings, 2 checks, 15 lines checked
0/1 valid patch
The check-git-log tool is also showing an issue with the commit message.
:~/dpdk_20_11/devtools# ./check-git-log.sh -1
cat: VERSION: No such file or directory
Line too long:
Issue reported by customer that only full mask was allowed on inner and outer
VLAN tag, thus not allowing mask to set VLAN ID filter only. Removed check that
Invalid patch(es) found - checked 1 patch
Regards,
Bernard.
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2020-10-14 10:34 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-10-13 13:57 [dpdk-dev] [PATCH v1] net/i40e: fix qinq flow pattern to allow non full mask Padraig Connolly
2020-10-14 10:34 ` Iremonger, Bernard
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).