From: Jiawen Wu <jiawenwu@trustnetic.com>
To: dev@dpdk.org
Cc: Jiawen Wu <jiawenwu@trustnetic.com>
Subject: [dpdk-dev] [PATCH v4 5/6] net/ngbe: add log type and error type
Date: Tue, 6 Apr 2021 17:30:47 +0800 [thread overview]
Message-ID: <20210406093048.2923172-6-jiawenwu@trustnetic.com> (raw)
In-Reply-To: <20210406093048.2923172-1-jiawenwu@trustnetic.com>
Add log type and error type to trace functions.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
---
doc/guides/nics/ngbe.rst | 20 +++++
drivers/net/ngbe/base/ngbe_status.h | 124 ++++++++++++++++++++++++++++
drivers/net/ngbe/base/ngbe_type.h | 1 +
drivers/net/ngbe/ngbe_ethdev.c | 16 ++++
drivers/net/ngbe/ngbe_logs.h | 45 ++++++++++
5 files changed, 206 insertions(+)
create mode 100644 drivers/net/ngbe/base/ngbe_status.h
create mode 100644 drivers/net/ngbe/ngbe_logs.h
diff --git a/doc/guides/nics/ngbe.rst b/doc/guides/nics/ngbe.rst
index 007d8e80e..1be045f48 100644
--- a/doc/guides/nics/ngbe.rst
+++ b/doc/guides/nics/ngbe.rst
@@ -15,6 +15,26 @@ Prerequisites
- Follow the DPDK :ref:`Getting Started Guide for Linux <linux_gsg>` to setup the basic DPDK environment.
+Pre-Installation Configuration
+------------------------------
+
+Dynamic Logging Parameters
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+One may leverage EAL option "--log-level" to change default levels
+for the log types supported by the driver. The option is used with
+an argument typically consisting of two parts separated by a colon.
+
+NGBE PMD provides the following log types available for control:
+
+- ``pmd.net.ngbe.driver`` (default level is **notice**)
+
+ Affects driver-wide messages unrelated to any particular devices.
+
+- ``pmd.net.ngbe.init`` (default level is **notice**)
+
+ Extra logging of the messages during PMD initialization.
+
Driver compilation and testing
------------------------------
diff --git a/drivers/net/ngbe/base/ngbe_status.h b/drivers/net/ngbe/base/ngbe_status.h
new file mode 100644
index 000000000..b2e7cfb29
--- /dev/null
+++ b/drivers/net/ngbe/base/ngbe_status.h
@@ -0,0 +1,124 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2018-2020
+ */
+
+#ifndef _NGBE_STATUS_H_
+#define _NGBE_STATUS_H_
+
+/* Error Codes:
+ * common error
+ * module error(simple)
+ * module error(detailed)
+ *
+ * (-256, 256): reserved for non-ngbe defined error code
+ */
+#define TERR_BASE (0x100)
+enum ngbe_error {
+ TERR_NULL = TERR_BASE,
+ TERR_ANY,
+ TERR_NOSUPP,
+ TERR_NOIMPL,
+ TERR_NOMEM,
+ TERR_NOSPACE,
+ TERR_NOENTRY,
+ TERR_CONFIG,
+ TERR_ARGS,
+ TERR_PARAM,
+ TERR_INVALID,
+ TERR_TIMEOUT,
+ TERR_VERSION,
+ TERR_REGISTER,
+ TERR_FEATURE,
+ TERR_RESET,
+ TERR_AUTONEG,
+ TERR_MBX,
+ TERR_I2C,
+ TERR_FC,
+ TERR_FLASH,
+ TERR_DEVICE,
+ TERR_HOSTIF,
+ TERR_SRAM,
+ TERR_EEPROM,
+ TERR_EEPROM_CHECKSUM,
+ TERR_EEPROM_PROTECT,
+ TERR_EEPROM_VERSION,
+ TERR_MAC,
+ TERR_MAC_ADDR,
+ TERR_SFP,
+ TERR_SFP_INITSEQ,
+ TERR_SFP_PRESENT,
+ TERR_SFP_SUPPORT,
+ TERR_SFP_SETUP,
+ TERR_PHY,
+ TERR_PHY_ADDR,
+ TERR_PHY_INIT,
+ TERR_FDIR_CMD,
+ TERR_FDIR_REINIT,
+ TERR_SWFW_SYNC,
+ TERR_SWFW_COMMAND,
+ TERR_FC_CFG,
+ TERR_FC_NEGO,
+ TERR_LINK_SETUP,
+ TERR_PCIE_PENDING,
+ TERR_PBA_SECTION,
+ TERR_OVERTEMP,
+ TERR_UNDERTEMP,
+ TERR_XPCS_POWERUP,
+};
+
+/* WARNING: just for legacy compatibility */
+#define NGBE_NOT_IMPLEMENTED 0x7FFFFFFF
+#define NGBE_ERR_OPS_DUMMY 0x3FFFFFFF
+
+/* Error Codes */
+#define NGBE_ERR_EEPROM -(TERR_BASE + 1)
+#define NGBE_ERR_EEPROM_CHECKSUM -(TERR_BASE + 2)
+#define NGBE_ERR_PHY -(TERR_BASE + 3)
+#define NGBE_ERR_CONFIG -(TERR_BASE + 4)
+#define NGBE_ERR_PARAM -(TERR_BASE + 5)
+#define NGBE_ERR_MAC_TYPE -(TERR_BASE + 6)
+#define NGBE_ERR_UNKNOWN_PHY -(TERR_BASE + 7)
+#define NGBE_ERR_LINK_SETUP -(TERR_BASE + 8)
+#define NGBE_ERR_ADAPTER_STOPPED -(TERR_BASE + 9)
+#define NGBE_ERR_INVALID_MAC_ADDR -(TERR_BASE + 10)
+#define NGBE_ERR_DEVICE_NOT_SUPPORTED -(TERR_BASE + 11)
+#define NGBE_ERR_MASTER_REQUESTS_PENDING -(TERR_BASE + 12)
+#define NGBE_ERR_INVALID_LINK_SETTINGS -(TERR_BASE + 13)
+#define NGBE_ERR_AUTONEG_NOT_COMPLETE -(TERR_BASE + 14)
+#define NGBE_ERR_RESET_FAILED -(TERR_BASE + 15)
+#define NGBE_ERR_SWFW_SYNC -(TERR_BASE + 16)
+#define NGBE_ERR_PHY_ADDR_INVALID -(TERR_BASE + 17)
+#define NGBE_ERR_I2C -(TERR_BASE + 18)
+#define NGBE_ERR_SFP_NOT_SUPPORTED -(TERR_BASE + 19)
+#define NGBE_ERR_SFP_NOT_PRESENT -(TERR_BASE + 20)
+#define NGBE_ERR_SFP_NO_INIT_SEQ_PRESENT -(TERR_BASE + 21)
+#define NGBE_ERR_NO_SAN_ADDR_PTR -(TERR_BASE + 22)
+#define NGBE_ERR_FDIR_REINIT_FAILED -(TERR_BASE + 23)
+#define NGBE_ERR_EEPROM_VERSION -(TERR_BASE + 24)
+#define NGBE_ERR_NO_SPACE -(TERR_BASE + 25)
+#define NGBE_ERR_OVERTEMP -(TERR_BASE + 26)
+#define NGBE_ERR_FC_NOT_NEGOTIATED -(TERR_BASE + 27)
+#define NGBE_ERR_FC_NOT_SUPPORTED -(TERR_BASE + 28)
+#define NGBE_ERR_SFP_SETUP_NOT_COMPLETE -(TERR_BASE + 30)
+#define NGBE_ERR_PBA_SECTION -(TERR_BASE + 31)
+#define NGBE_ERR_INVALID_ARGUMENT -(TERR_BASE + 32)
+#define NGBE_ERR_HOST_INTERFACE_COMMAND -(TERR_BASE + 33)
+#define NGBE_ERR_OUT_OF_MEM -(TERR_BASE + 34)
+#define NGBE_ERR_FEATURE_NOT_SUPPORTED -(TERR_BASE + 36)
+#define NGBE_ERR_EEPROM_PROTECTED_REGION -(TERR_BASE + 37)
+#define NGBE_ERR_FDIR_CMD_INCOMPLETE -(TERR_BASE + 38)
+#define NGBE_ERR_FW_RESP_INVALID -(TERR_BASE + 39)
+#define NGBE_ERR_TOKEN_RETRY -(TERR_BASE + 40)
+#define NGBE_ERR_FLASH_LOADING_FAILED -(TERR_BASE + 41)
+
+#define NGBE_ERR_NOSUPP -(TERR_BASE + 42)
+#define NGBE_ERR_UNDERTEMP -(TERR_BASE + 43)
+#define NGBE_ERR_XPCS_POWER_UP_FAILED -(TERR_BASE + 44)
+#define NGBE_ERR_PHY_INIT_NOT_DONE -(TERR_BASE + 45)
+#define NGBE_ERR_TIMEOUT -(TERR_BASE + 46)
+#define NGBE_ERR_REGISTER -(TERR_BASE + 47)
+#define NGBE_ERR_MNG_ACCESS_FAILED -(TERR_BASE + 49)
+#define NGBE_ERR_PHY_TYPE -(TERR_BASE + 50)
+#define NGBE_ERR_PHY_TIMEOUT -(TERR_BASE + 51)
+
+#endif /* _NGBE_STATUS_H_ */
diff --git a/drivers/net/ngbe/base/ngbe_type.h b/drivers/net/ngbe/base/ngbe_type.h
index f143ecfd0..30d66f109 100644
--- a/drivers/net/ngbe/base/ngbe_type.h
+++ b/drivers/net/ngbe/base/ngbe_type.h
@@ -7,6 +7,7 @@
#define NGBE_ALIGN 128 /* as intel did */
+#include "ngbe_status.h"
#include "ngbe_osdep.h"
#include "ngbe_devids.h"
diff --git a/drivers/net/ngbe/ngbe_ethdev.c b/drivers/net/ngbe/ngbe_ethdev.c
index 8c1accbbc..4608b1063 100644
--- a/drivers/net/ngbe/ngbe_ethdev.c
+++ b/drivers/net/ngbe/ngbe_ethdev.c
@@ -5,6 +5,7 @@
#include <rte_common.h>
#include <ethdev_pci.h>
+#include "ngbe_logs.h"
#include "base/ngbe.h"
#include "ngbe_ethdev.h"
@@ -36,6 +37,8 @@ eth_ngbe_dev_init(struct rte_eth_dev *eth_dev, void *init_params __rte_unused)
struct ngbe_hw *hw = NGBE_DEV_HW(eth_dev);
const struct rte_memzone *mz;
+ PMD_INIT_FUNC_TRACE();
+
if (rte_eal_process_type() != RTE_PROC_PRIMARY)
return 0;
@@ -64,6 +67,8 @@ eth_ngbe_dev_init(struct rte_eth_dev *eth_dev, void *init_params __rte_unused)
static int
eth_ngbe_dev_uninit(struct rte_eth_dev *eth_dev)
{
+ PMD_INIT_FUNC_TRACE();
+
if (rte_eal_process_type() != RTE_PROC_PRIMARY)
return 0;
@@ -129,6 +134,8 @@ static struct rte_pci_driver rte_ngbe_pmd = {
static int
ngbe_dev_close(struct rte_eth_dev *dev)
{
+ PMD_INIT_FUNC_TRACE();
+
RTE_SET_USED(dev);
return 0;
@@ -138,3 +145,12 @@ RTE_PMD_REGISTER_PCI(net_ngbe, rte_ngbe_pmd);
RTE_PMD_REGISTER_PCI_TABLE(net_ngbe, pci_id_ngbe_map);
RTE_PMD_REGISTER_KMOD_DEP(net_ngbe, "* igb_uio | uio_pci_generic | vfio-pci");
+RTE_LOG_REGISTER(ngbe_logtype_init, pmd.net.ngbe.init, NOTICE);
+RTE_LOG_REGISTER(ngbe_logtype_driver, pmd.net.ngbe.driver, NOTICE);
+
+#ifdef RTE_ETHDEV_DEBUG_RX
+ RTE_LOG_REGISTER(ngbe_logtype_rx, pmd.net.ngbe.rx, DEBUG);
+#endif
+#ifdef RTE_ETHDEV_DEBUG_TX
+ RTE_LOG_REGISTER(ngbe_logtype_tx, pmd.net.ngbe.tx, DEBUG);
+#endif
diff --git a/drivers/net/ngbe/ngbe_logs.h b/drivers/net/ngbe/ngbe_logs.h
new file mode 100644
index 000000000..c72095ae7
--- /dev/null
+++ b/drivers/net/ngbe/ngbe_logs.h
@@ -0,0 +1,45 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2018-2020
+ */
+
+#ifndef _NGBE_LOGS_H_
+#define _NGBE_LOGS_H_
+
+/*
+ * PMD_USER_LOG: for user
+ */
+extern int ngbe_logtype_init;
+#define PMD_INIT_LOG(level, fmt, args...) \
+ rte_log(RTE_LOG_ ## level, ngbe_logtype_init, \
+ "%s(): " fmt "\n", __func__, ##args)
+
+extern int ngbe_logtype_driver;
+#define PMD_DRV_LOG(level, fmt, args...) \
+ rte_log(RTE_LOG_ ## level, ngbe_logtype_driver, \
+ "%s(): " fmt "\n", __func__, ##args)
+
+#ifdef RTE_ETHDEV_DEBUG_RX
+extern int ngbe_logtype_rx;
+#define PMD_RX_LOG(level, fmt, args...) \
+ rte_log(RTE_LOG_ ## level, ngbe_logtype_rx, \
+ "%s(): " fmt "\n", __func__, ##args)
+#else
+#define PMD_RX_LOG(level, fmt, args...) do { } while (0)
+#endif
+
+#ifdef RTE_ETHDEV_DEBUG_TX
+extern int ngbe_logtype_tx;
+#define PMD_TX_LOG(level, fmt, args...) \
+ rte_log(RTE_LOG_ ## level, ngbe_logtype_tx, \
+ "%s(): " fmt "\n", __func__, ##args)
+#else
+#define PMD_TX_LOG(level, fmt, args...) do { } while (0)
+#endif
+
+#define TLOG_DEBUG(fmt, args...) PMD_DRV_LOG(DEBUG, fmt, ##args)
+
+#define DEBUGOUT(fmt, args...) TLOG_DEBUG(fmt, ##args)
+#define PMD_INIT_FUNC_TRACE() TLOG_DEBUG(" >>")
+#define DEBUGFUNC(fmt) TLOG_DEBUG(fmt)
+
+#endif /* _NGBE_LOGS_H_ */
--
2.21.0.windows.1
next prev parent reply other threads:[~2021-04-06 9:31 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-06 9:30 [dpdk-dev] [PATCH v4 0/6] net: ngbe PMD Jiawen Wu
2021-04-06 9:30 ` [dpdk-dev] [PATCH v4 1/6] net/ngbe: add build and doc infrastructure Jiawen Wu
2021-04-09 14:37 ` Ferruh Yigit
2021-04-12 6:33 ` Jiawen Wu
2021-04-06 9:30 ` [dpdk-dev] [PATCH v4 2/6] net/ngbe: add device IDs Jiawen Wu
2021-04-09 14:37 ` Ferruh Yigit
2021-04-06 9:30 ` [dpdk-dev] [PATCH v4 3/6] net/ngbe: support probe and remove Jiawen Wu
2021-04-09 14:40 ` Ferruh Yigit
2021-04-06 9:30 ` [dpdk-dev] [PATCH v4 4/6] net/ngbe: add device init and uninit Jiawen Wu
2021-04-06 9:30 ` Jiawen Wu [this message]
2021-04-06 9:30 ` [dpdk-dev] [PATCH v4 6/6] net/ngbe: define registers Jiawen Wu
2021-04-09 14:47 ` [dpdk-dev] [PATCH v4 0/6] net: ngbe PMD Ferruh Yigit
2021-04-29 10:52 ` Jiawen Wu
2021-04-29 11:21 ` Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210406093048.2923172-6-jiawenwu@trustnetic.com \
--to=jiawenwu@trustnetic.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).