From: Jiawen Wu <jiawenwu@trustnetic.com>
To: dev@dpdk.org
Cc: Jiawen Wu <jiawenwu@trustnetic.com>
Subject: [dpdk-dev] [PATCH v5 00/24] net: ngbe PMD
Date: Wed, 2 Jun 2021 17:40:44 +0800 [thread overview]
Message-ID: <20210602094108.1575640-1-jiawenwu@trustnetic.com> (raw)
This patch set provides a skeleton of ngbe PMD,
which adapted to Wangxun WX1860 series NICs.
v5:
- Extend patches with device initialization and RxTx functions.
v4:
- Fix compile error.
v3:
- Use rte_ether functions to define marcos.
v2:
- Correct some clerical errors.
- Use ethdev debug flags instead of driver own.
Jiawen Wu (24):
net/ngbe: add build and doc infrastructure
net/ngbe: add device IDs
net/ngbe: support probe and remove
net/ngbe: add device init and uninit
net/ngbe: add log type and error type
net/ngbe: define registers
net/ngbe: set MAC type and LAN id
net/ngbe: init and validate EEPROM
net/ngbe: add HW initialization
net/ngbe: identify PHY and reset PHY
net/ngbe: store MAC address
net/ngbe: add info get operation
net/ngbe: support link update
net/ngbe: setup the check PHY link
net/ngbe: add Rx queue setup and release
net/ngbe: add Tx queue setup and release
net/ngbe: add Rx and Tx init
net/ngbe: add packet type
net/ngbe: add simple Rx and Tx flow
net/ngbe: support bulk and scatter Rx
net/ngbe: support full-featured Tx path
net/ngbe: add device start operation
net/ngbe: start and stop RxTx
net/ngbe: add device stop operation
MAINTAINERS | 6 +
doc/guides/nics/features/ngbe.ini | 25 +
doc/guides/nics/index.rst | 1 +
doc/guides/nics/ngbe.rst | 58 +
doc/guides/rel_notes/release_21_08.rst | 6 +
drivers/net/meson.build | 1 +
drivers/net/ngbe/base/meson.build | 26 +
drivers/net/ngbe/base/ngbe.h | 11 +
drivers/net/ngbe/base/ngbe_devids.h | 84 +
drivers/net/ngbe/base/ngbe_dummy.h | 209 ++
drivers/net/ngbe/base/ngbe_eeprom.c | 203 ++
drivers/net/ngbe/base/ngbe_eeprom.h | 17 +
drivers/net/ngbe/base/ngbe_hw.c | 1069 +++++++++
drivers/net/ngbe/base/ngbe_hw.h | 59 +
drivers/net/ngbe/base/ngbe_mng.c | 198 ++
drivers/net/ngbe/base/ngbe_mng.h | 65 +
drivers/net/ngbe/base/ngbe_osdep.h | 178 ++
drivers/net/ngbe/base/ngbe_phy.c | 451 ++++
drivers/net/ngbe/base/ngbe_phy.h | 62 +
drivers/net/ngbe/base/ngbe_phy_mvl.c | 251 +++
drivers/net/ngbe/base/ngbe_phy_mvl.h | 97 +
drivers/net/ngbe/base/ngbe_phy_rtl.c | 240 ++
drivers/net/ngbe/base/ngbe_phy_rtl.h | 89 +
drivers/net/ngbe/base/ngbe_phy_yt.c | 272 +++
drivers/net/ngbe/base/ngbe_phy_yt.h | 76 +
drivers/net/ngbe/base/ngbe_regs.h | 1490 +++++++++++++
drivers/net/ngbe/base/ngbe_status.h | 125 ++
drivers/net/ngbe/base/ngbe_type.h | 210 ++
drivers/net/ngbe/meson.build | 22 +
drivers/net/ngbe/ngbe_ethdev.c | 1266 +++++++++++
drivers/net/ngbe/ngbe_ethdev.h | 146 ++
drivers/net/ngbe/ngbe_logs.h | 46 +
drivers/net/ngbe/ngbe_ptypes.c | 640 ++++++
drivers/net/ngbe/ngbe_ptypes.h | 351 +++
drivers/net/ngbe/ngbe_rxtx.c | 2829 ++++++++++++++++++++++++
drivers/net/ngbe/ngbe_rxtx.h | 366 +++
drivers/net/ngbe/version.map | 3 +
37 files changed, 11248 insertions(+)
create mode 100644 doc/guides/nics/features/ngbe.ini
create mode 100644 doc/guides/nics/ngbe.rst
create mode 100644 drivers/net/ngbe/base/meson.build
create mode 100644 drivers/net/ngbe/base/ngbe.h
create mode 100644 drivers/net/ngbe/base/ngbe_devids.h
create mode 100644 drivers/net/ngbe/base/ngbe_dummy.h
create mode 100644 drivers/net/ngbe/base/ngbe_eeprom.c
create mode 100644 drivers/net/ngbe/base/ngbe_eeprom.h
create mode 100644 drivers/net/ngbe/base/ngbe_hw.c
create mode 100644 drivers/net/ngbe/base/ngbe_hw.h
create mode 100644 drivers/net/ngbe/base/ngbe_mng.c
create mode 100644 drivers/net/ngbe/base/ngbe_mng.h
create mode 100644 drivers/net/ngbe/base/ngbe_osdep.h
create mode 100644 drivers/net/ngbe/base/ngbe_phy.c
create mode 100644 drivers/net/ngbe/base/ngbe_phy.h
create mode 100644 drivers/net/ngbe/base/ngbe_phy_mvl.c
create mode 100644 drivers/net/ngbe/base/ngbe_phy_mvl.h
create mode 100644 drivers/net/ngbe/base/ngbe_phy_rtl.c
create mode 100644 drivers/net/ngbe/base/ngbe_phy_rtl.h
create mode 100644 drivers/net/ngbe/base/ngbe_phy_yt.c
create mode 100644 drivers/net/ngbe/base/ngbe_phy_yt.h
create mode 100644 drivers/net/ngbe/base/ngbe_regs.h
create mode 100644 drivers/net/ngbe/base/ngbe_status.h
create mode 100644 drivers/net/ngbe/base/ngbe_type.h
create mode 100644 drivers/net/ngbe/meson.build
create mode 100644 drivers/net/ngbe/ngbe_ethdev.c
create mode 100644 drivers/net/ngbe/ngbe_ethdev.h
create mode 100644 drivers/net/ngbe/ngbe_logs.h
create mode 100644 drivers/net/ngbe/ngbe_ptypes.c
create mode 100644 drivers/net/ngbe/ngbe_ptypes.h
create mode 100644 drivers/net/ngbe/ngbe_rxtx.c
create mode 100644 drivers/net/ngbe/ngbe_rxtx.h
create mode 100644 drivers/net/ngbe/version.map
--
2.27.0
next reply other threads:[~2021-06-02 9:39 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-02 9:40 Jiawen Wu [this message]
2021-06-02 9:40 ` [dpdk-dev] [PATCH v5 01/24] net/ngbe: add build and doc infrastructure Jiawen Wu
2021-06-14 17:05 ` Andrew Rybchenko
2021-06-02 9:40 ` [dpdk-dev] [PATCH v5 02/24] net/ngbe: add device IDs Jiawen Wu
2021-06-14 17:08 ` Andrew Rybchenko
2021-06-15 2:52 ` Jiawen Wu
2021-06-02 9:40 ` [dpdk-dev] [PATCH v5 03/24] net/ngbe: support probe and remove Jiawen Wu
2021-06-14 17:27 ` Andrew Rybchenko
2021-06-02 9:40 ` [dpdk-dev] [PATCH v5 04/24] net/ngbe: add device init and uninit Jiawen Wu
2021-06-14 17:36 ` Andrew Rybchenko
2021-06-02 9:40 ` [dpdk-dev] [PATCH v5 05/24] net/ngbe: add log type and error type Jiawen Wu
2021-06-14 17:54 ` Andrew Rybchenko
2021-06-15 7:13 ` Jiawen Wu
2021-07-01 13:57 ` David Marchand
2021-07-02 2:08 ` Jiawen Wu
2021-06-02 9:40 ` [dpdk-dev] [PATCH v5 06/24] net/ngbe: define registers Jiawen Wu
2021-06-02 9:40 ` [dpdk-dev] [PATCH v5 07/24] net/ngbe: set MAC type and LAN id Jiawen Wu
2021-06-02 9:40 ` [dpdk-dev] [PATCH v5 08/24] net/ngbe: init and validate EEPROM Jiawen Wu
2021-06-02 9:40 ` [dpdk-dev] [PATCH v5 09/24] net/ngbe: add HW initialization Jiawen Wu
2021-06-14 18:01 ` Andrew Rybchenko
2021-06-02 9:40 ` [dpdk-dev] [PATCH v5 10/24] net/ngbe: identify PHY and reset PHY Jiawen Wu
2021-06-02 9:40 ` [dpdk-dev] [PATCH v5 11/24] net/ngbe: store MAC address Jiawen Wu
2021-06-02 9:40 ` [dpdk-dev] [PATCH v5 12/24] net/ngbe: add info get operation Jiawen Wu
2021-06-14 18:13 ` Andrew Rybchenko
2021-06-02 9:40 ` [dpdk-dev] [PATCH v5 13/24] net/ngbe: support link update Jiawen Wu
2021-06-14 18:45 ` Andrew Rybchenko
2021-06-02 9:40 ` [dpdk-dev] [PATCH v5 14/24] net/ngbe: setup the check PHY link Jiawen Wu
2021-06-02 9:40 ` [dpdk-dev] [PATCH v5 15/24] net/ngbe: add Rx queue setup and release Jiawen Wu
2021-06-14 18:53 ` Andrew Rybchenko
2021-06-15 7:50 ` Jiawen Wu
2021-06-15 8:06 ` Andrew Rybchenko
2021-06-02 9:41 ` [dpdk-dev] [PATCH v5 16/24] net/ngbe: add Tx " Jiawen Wu
2021-06-14 18:59 ` Andrew Rybchenko
2021-06-02 9:41 ` [dpdk-dev] [PATCH v5 17/24] net/ngbe: add Rx and Tx init Jiawen Wu
2021-06-14 19:01 ` Andrew Rybchenko
2021-06-02 9:41 ` [dpdk-dev] [PATCH v5 18/24] net/ngbe: add packet type Jiawen Wu
2021-06-14 19:06 ` Andrew Rybchenko
2021-06-02 9:41 ` [dpdk-dev] [PATCH v5 19/24] net/ngbe: add simple Rx and Tx flow Jiawen Wu
2021-06-14 19:10 ` Andrew Rybchenko
2021-06-02 9:41 ` [dpdk-dev] [PATCH v5 20/24] net/ngbe: support bulk and scatter Rx Jiawen Wu
2021-06-14 19:17 ` Andrew Rybchenko
2021-06-02 9:41 ` [dpdk-dev] [PATCH v5 21/24] net/ngbe: support full-featured Tx path Jiawen Wu
2021-06-14 19:22 ` Andrew Rybchenko
2021-06-14 19:23 ` Andrew Rybchenko
2021-06-02 9:41 ` [dpdk-dev] [PATCH v5 22/24] net/ngbe: add device start operation Jiawen Wu
2021-06-14 19:33 ` Andrew Rybchenko
2021-06-02 9:41 ` [dpdk-dev] [PATCH v5 23/24] net/ngbe: start and stop RxTx Jiawen Wu
2021-06-14 20:44 ` Andrew Rybchenko
2021-06-02 9:41 ` [dpdk-dev] [PATCH v5 24/24] net/ngbe: add device stop operation Jiawen Wu
2021-06-11 1:38 ` [dpdk-dev] [PATCH v5 00/24] net: ngbe PMD Jiawen Wu
2021-06-14 20:56 ` Andrew Rybchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210602094108.1575640-1-jiawenwu@trustnetic.com \
--to=jiawenwu@trustnetic.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).