DPDK patches and discussions
 help / color / mirror / Atom feed
From: Jiawen Wu <jiawenwu@trustnetic.com>
To: dev@dpdk.org
Cc: Jiawen Wu <jiawenwu@trustnetic.com>
Subject: [dpdk-dev] [PATCH v5 11/24] net/ngbe: store MAC address
Date: Wed,  2 Jun 2021 17:40:55 +0800	[thread overview]
Message-ID: <20210602094108.1575640-12-jiawenwu@trustnetic.com> (raw)
In-Reply-To: <20210602094108.1575640-1-jiawenwu@trustnetic.com>

Store MAC addresses and init receive address filters.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
---
 drivers/net/ngbe/base/ngbe_dummy.h |  33 +++
 drivers/net/ngbe/base/ngbe_hw.c    | 323 +++++++++++++++++++++++++++++
 drivers/net/ngbe/base/ngbe_hw.h    |  13 ++
 drivers/net/ngbe/base/ngbe_osdep.h |   1 +
 drivers/net/ngbe/base/ngbe_type.h  |  19 ++
 drivers/net/ngbe/ngbe_ethdev.c     |  25 +++
 drivers/net/ngbe/ngbe_ethdev.h     |   2 +
 7 files changed, 416 insertions(+)

diff --git a/drivers/net/ngbe/base/ngbe_dummy.h b/drivers/net/ngbe/base/ngbe_dummy.h
index 15017cfd82..8462d6d1cb 100644
--- a/drivers/net/ngbe/base/ngbe_dummy.h
+++ b/drivers/net/ngbe/base/ngbe_dummy.h
@@ -51,6 +51,10 @@ static inline s32 ngbe_mac_stop_hw_dummy(struct ngbe_hw *TUP0)
 {
 	return NGBE_ERR_OPS_DUMMY;
 }
+static inline s32 ngbe_mac_get_mac_addr_dummy(struct ngbe_hw *TUP0, u8 *TUP1)
+{
+	return NGBE_ERR_OPS_DUMMY;
+}
 static inline s32 ngbe_mac_acquire_swfw_sync_dummy(struct ngbe_hw *TUP0,
 					u32 TUP1)
 {
@@ -60,6 +64,29 @@ static inline void ngbe_mac_release_swfw_sync_dummy(struct ngbe_hw *TUP0,
 					u32 TUP1)
 {
 }
+static inline s32 ngbe_mac_set_rar_dummy(struct ngbe_hw *TUP0, u32 TUP1,
+					u8 *TUP2, u32 TUP3, u32 TUP4)
+{
+	return NGBE_ERR_OPS_DUMMY;
+}
+static inline s32 ngbe_mac_clear_rar_dummy(struct ngbe_hw *TUP0, u32 TUP1)
+{
+	return NGBE_ERR_OPS_DUMMY;
+}
+static inline s32 ngbe_mac_set_vmdq_dummy(struct ngbe_hw *TUP0, u32 TUP1,
+					u32 TUP2)
+{
+	return NGBE_ERR_OPS_DUMMY;
+}
+static inline s32 ngbe_mac_clear_vmdq_dummy(struct ngbe_hw *TUP0, u32 TUP1,
+					u32 TUP2)
+{
+	return NGBE_ERR_OPS_DUMMY;
+}
+static inline s32 ngbe_mac_init_rx_addrs_dummy(struct ngbe_hw *TUP0)
+{
+	return NGBE_ERR_OPS_DUMMY;
+}
 static inline s32 ngbe_mac_init_thermal_ssth_dummy(struct ngbe_hw *TUP0)
 {
 	return NGBE_ERR_OPS_DUMMY;
@@ -105,8 +132,14 @@ static inline void ngbe_init_ops_dummy(struct ngbe_hw *hw)
 	hw->mac.init_hw = ngbe_mac_init_hw_dummy;
 	hw->mac.reset_hw = ngbe_mac_reset_hw_dummy;
 	hw->mac.stop_hw = ngbe_mac_stop_hw_dummy;
+	hw->mac.get_mac_addr = ngbe_mac_get_mac_addr_dummy;
 	hw->mac.acquire_swfw_sync = ngbe_mac_acquire_swfw_sync_dummy;
 	hw->mac.release_swfw_sync = ngbe_mac_release_swfw_sync_dummy;
+	hw->mac.set_rar = ngbe_mac_set_rar_dummy;
+	hw->mac.clear_rar = ngbe_mac_clear_rar_dummy;
+	hw->mac.set_vmdq = ngbe_mac_set_vmdq_dummy;
+	hw->mac.clear_vmdq = ngbe_mac_clear_vmdq_dummy;
+	hw->mac.init_rx_addrs = ngbe_mac_init_rx_addrs_dummy;
 	hw->mac.init_thermal_sensor_thresh = ngbe_mac_init_thermal_ssth_dummy;
 	hw->mac.check_overtemp = ngbe_mac_check_overtemp_dummy;
 	hw->phy.identify = ngbe_phy_identify_dummy;
diff --git a/drivers/net/ngbe/base/ngbe_hw.c b/drivers/net/ngbe/base/ngbe_hw.c
index ebd163d9e6..386557f468 100644
--- a/drivers/net/ngbe/base/ngbe_hw.c
+++ b/drivers/net/ngbe/base/ngbe_hw.c
@@ -142,9 +142,49 @@ s32 ngbe_reset_hw_em(struct ngbe_hw *hw)
 
 	msec_delay(50);
 
+	/* Store the permanent mac address */
+	hw->mac.get_mac_addr(hw, hw->mac.perm_addr);
+
+	/*
+	 * Store MAC address from RAR0, clear receive address registers, and
+	 * clear the multicast table.
+	 */
+	hw->mac.num_rar_entries = NGBE_EM_RAR_ENTRIES;
+	hw->mac.init_rx_addrs(hw);
+
 	return status;
 }
 
+/**
+ *  ngbe_get_mac_addr - Generic get MAC address
+ *  @hw: pointer to hardware structure
+ *  @mac_addr: Adapter MAC address
+ *
+ *  Reads the adapter's MAC address from first Receive Address Register (RAR0)
+ *  A reset of the adapter must be performed prior to calling this function
+ *  in order for the MAC address to have been loaded from the EEPROM into RAR0
+ **/
+s32 ngbe_get_mac_addr(struct ngbe_hw *hw, u8 *mac_addr)
+{
+	u32 rar_high;
+	u32 rar_low;
+	u16 i;
+
+	DEBUGFUNC("ngbe_get_mac_addr");
+
+	wr32(hw, NGBE_ETHADDRIDX, 0);
+	rar_high = rd32(hw, NGBE_ETHADDRH);
+	rar_low = rd32(hw, NGBE_ETHADDRL);
+
+	for (i = 0; i < 2; i++)
+		mac_addr[i] = (u8)(rar_high >> (1 - i) * 8);
+
+	for (i = 0; i < 4; i++)
+		mac_addr[i + 2] = (u8)(rar_low >> (3 - i) * 8);
+
+	return 0;
+}
+
 /**
  *  ngbe_set_lan_id_multi_port - Set LAN id for PCIe multiple port devices
  *  @hw: pointer to the HW structure
@@ -215,6 +255,196 @@ s32 ngbe_stop_hw(struct ngbe_hw *hw)
 	return 0;
 }
 
+/**
+ *  ngbe_validate_mac_addr - Validate MAC address
+ *  @mac_addr: pointer to MAC address.
+ *
+ *  Tests a MAC address to ensure it is a valid Individual Address.
+ **/
+s32 ngbe_validate_mac_addr(u8 *mac_addr)
+{
+	s32 status = 0;
+
+	DEBUGFUNC("ngbe_validate_mac_addr");
+
+	/* Make sure it is not a multicast address */
+	if (NGBE_IS_MULTICAST((struct rte_ether_addr *)mac_addr)) {
+		status = NGBE_ERR_INVALID_MAC_ADDR;
+	/* Not a broadcast address */
+	} else if (NGBE_IS_BROADCAST((struct rte_ether_addr *)mac_addr)) {
+		status = NGBE_ERR_INVALID_MAC_ADDR;
+	/* Reject the zero address */
+	} else if (mac_addr[0] == 0 && mac_addr[1] == 0 && mac_addr[2] == 0 &&
+		   mac_addr[3] == 0 && mac_addr[4] == 0 && mac_addr[5] == 0) {
+		status = NGBE_ERR_INVALID_MAC_ADDR;
+	}
+	return status;
+}
+
+/**
+ *  ngbe_set_rar - Set Rx address register
+ *  @hw: pointer to hardware structure
+ *  @index: Receive address register to write
+ *  @addr: Address to put into receive address register
+ *  @vmdq: VMDq "set" or "pool" index
+ *  @enable_addr: set flag that address is active
+ *
+ *  Puts an ethernet address into a receive address register.
+ **/
+s32 ngbe_set_rar(struct ngbe_hw *hw, u32 index, u8 *addr, u32 vmdq,
+			  u32 enable_addr)
+{
+	u32 rar_low, rar_high;
+	u32 rar_entries = hw->mac.num_rar_entries;
+
+	DEBUGFUNC("ngbe_set_rar");
+
+	/* Make sure we are using a valid rar index range */
+	if (index >= rar_entries) {
+		DEBUGOUT("RAR index %d is out of range.\n", index);
+		return NGBE_ERR_INVALID_ARGUMENT;
+	}
+
+	/* setup VMDq pool selection before this RAR gets enabled */
+	hw->mac.set_vmdq(hw, index, vmdq);
+
+	/*
+	 * HW expects these in little endian so we reverse the byte
+	 * order from network order (big endian) to little endian
+	 */
+	rar_low = NGBE_ETHADDRL_AD0(addr[5]) |
+		  NGBE_ETHADDRL_AD1(addr[4]) |
+		  NGBE_ETHADDRL_AD2(addr[3]) |
+		  NGBE_ETHADDRL_AD3(addr[2]);
+	/*
+	 * Some parts put the VMDq setting in the extra RAH bits,
+	 * so save everything except the lower 16 bits that hold part
+	 * of the address and the address valid bit.
+	 */
+	rar_high = rd32(hw, NGBE_ETHADDRH);
+	rar_high &= ~NGBE_ETHADDRH_AD_MASK;
+	rar_high |= (NGBE_ETHADDRH_AD4(addr[1]) |
+		     NGBE_ETHADDRH_AD5(addr[0]));
+
+	rar_high &= ~NGBE_ETHADDRH_VLD;
+	if (enable_addr != 0)
+		rar_high |= NGBE_ETHADDRH_VLD;
+
+	wr32(hw, NGBE_ETHADDRIDX, index);
+	wr32(hw, NGBE_ETHADDRL, rar_low);
+	wr32(hw, NGBE_ETHADDRH, rar_high);
+
+	return 0;
+}
+
+/**
+ *  ngbe_clear_rar - Remove Rx address register
+ *  @hw: pointer to hardware structure
+ *  @index: Receive address register to write
+ *
+ *  Clears an ethernet address from a receive address register.
+ **/
+s32 ngbe_clear_rar(struct ngbe_hw *hw, u32 index)
+{
+	u32 rar_high;
+	u32 rar_entries = hw->mac.num_rar_entries;
+
+	DEBUGFUNC("ngbe_clear_rar");
+
+	/* Make sure we are using a valid rar index range */
+	if (index >= rar_entries) {
+		DEBUGOUT("RAR index %d is out of range.\n", index);
+		return NGBE_ERR_INVALID_ARGUMENT;
+	}
+
+	/*
+	 * Some parts put the VMDq setting in the extra RAH bits,
+	 * so save everything except the lower 16 bits that hold part
+	 * of the address and the address valid bit.
+	 */
+	wr32(hw, NGBE_ETHADDRIDX, index);
+	rar_high = rd32(hw, NGBE_ETHADDRH);
+	rar_high &= ~(NGBE_ETHADDRH_AD_MASK | NGBE_ETHADDRH_VLD);
+
+	wr32(hw, NGBE_ETHADDRL, 0);
+	wr32(hw, NGBE_ETHADDRH, rar_high);
+
+	/* clear VMDq pool/queue selection for this RAR */
+	hw->mac.clear_vmdq(hw, index, BIT_MASK32);
+
+	return 0;
+}
+
+/**
+ *  ngbe_init_rx_addrs - Initializes receive address filters.
+ *  @hw: pointer to hardware structure
+ *
+ *  Places the MAC address in receive address register 0 and clears the rest
+ *  of the receive address registers. Clears the multicast table. Assumes
+ *  the receiver is in reset when the routine is called.
+ **/
+s32 ngbe_init_rx_addrs(struct ngbe_hw *hw)
+{
+	u32 i;
+	u32 psrctl;
+	u32 rar_entries = hw->mac.num_rar_entries;
+
+	DEBUGFUNC("ngbe_init_rx_addrs");
+
+	/*
+	 * If the current mac address is valid, assume it is a software override
+	 * to the permanent address.
+	 * Otherwise, use the permanent address from the eeprom.
+	 */
+	if (ngbe_validate_mac_addr(hw->mac.addr) ==
+	    NGBE_ERR_INVALID_MAC_ADDR) {
+		/* Get the MAC address from the RAR0 for later reference */
+		hw->mac.get_mac_addr(hw, hw->mac.addr);
+
+		DEBUGOUT(" Keeping Current RAR0 Addr =%.2X %.2X %.2X ",
+			  hw->mac.addr[0], hw->mac.addr[1],
+			  hw->mac.addr[2]);
+		DEBUGOUT("%.2X %.2X %.2X\n", hw->mac.addr[3],
+			  hw->mac.addr[4], hw->mac.addr[5]);
+	} else {
+		/* Setup the receive address. */
+		DEBUGOUT("Overriding MAC Address in RAR[0]\n");
+		DEBUGOUT(" New MAC Addr =%.2X %.2X %.2X ",
+			  hw->mac.addr[0], hw->mac.addr[1],
+			  hw->mac.addr[2]);
+		DEBUGOUT("%.2X %.2X %.2X\n", hw->mac.addr[3],
+			  hw->mac.addr[4], hw->mac.addr[5]);
+
+		hw->mac.set_rar(hw, 0, hw->mac.addr, 0, true);
+	}
+
+	/* clear VMDq pool/queue selection for RAR 0 */
+	hw->mac.clear_vmdq(hw, 0, BIT_MASK32);
+
+	/* Zero out the other receive addresses. */
+	DEBUGOUT("Clearing RAR[1-%d]\n", rar_entries - 1);
+	for (i = 1; i < rar_entries; i++) {
+		wr32(hw, NGBE_ETHADDRIDX, i);
+		wr32(hw, NGBE_ETHADDRL, 0);
+		wr32(hw, NGBE_ETHADDRH, 0);
+	}
+
+	/* Clear the MTA */
+	hw->addr_ctrl.mta_in_use = 0;
+	psrctl = rd32(hw, NGBE_PSRCTL);
+	psrctl &= ~(NGBE_PSRCTL_ADHF12_MASK | NGBE_PSRCTL_MCHFENA);
+	psrctl |= NGBE_PSRCTL_ADHF12(hw->mac.mc_filter_type);
+	wr32(hw, NGBE_PSRCTL, psrctl);
+
+	DEBUGOUT(" Clearing MTA\n");
+	for (i = 0; i < hw->mac.mcft_size; i++)
+		wr32(hw, NGBE_MCADDRTBL(i), 0);
+
+	ngbe_init_uta_tables(hw);
+
+	return 0;
+}
+
 /**
  *  ngbe_acquire_swfw_sync - Acquire SWFW semaphore
  *  @hw: pointer to hardware structure
@@ -286,6 +516,89 @@ void ngbe_release_swfw_sync(struct ngbe_hw *hw, u32 mask)
 	ngbe_release_eeprom_semaphore(hw);
 }
 
+/**
+ *  ngbe_clear_vmdq - Disassociate a VMDq pool index from a rx address
+ *  @hw: pointer to hardware struct
+ *  @rar: receive address register index to disassociate
+ *  @vmdq: VMDq pool index to remove from the rar
+ **/
+s32 ngbe_clear_vmdq(struct ngbe_hw *hw, u32 rar, u32 vmdq)
+{
+	u32 mpsar;
+	u32 rar_entries = hw->mac.num_rar_entries;
+
+	DEBUGFUNC("ngbe_clear_vmdq");
+
+	/* Make sure we are using a valid rar index range */
+	if (rar >= rar_entries) {
+		DEBUGOUT("RAR index %d is out of range.\n", rar);
+		return NGBE_ERR_INVALID_ARGUMENT;
+	}
+
+	wr32(hw, NGBE_ETHADDRIDX, rar);
+	mpsar = rd32(hw, NGBE_ETHADDRASS);
+
+	if (NGBE_REMOVED(hw->hw_addr))
+		goto done;
+
+	if (!mpsar)
+		goto done;
+
+	mpsar &= ~(1 << vmdq);
+	wr32(hw, NGBE_ETHADDRASS, mpsar);
+
+	/* was that the last pool using this rar? */
+	if (mpsar == 0 && rar != 0)
+		hw->mac.clear_rar(hw, rar);
+done:
+	return 0;
+}
+
+/**
+ *  ngbe_set_vmdq - Associate a VMDq pool index with a rx address
+ *  @hw: pointer to hardware struct
+ *  @rar: receive address register index to associate with a VMDq index
+ *  @vmdq: VMDq pool index
+ **/
+s32 ngbe_set_vmdq(struct ngbe_hw *hw, u32 rar, u32 vmdq)
+{
+	u32 mpsar;
+	u32 rar_entries = hw->mac.num_rar_entries;
+
+	DEBUGFUNC("ngbe_set_vmdq");
+
+	/* Make sure we are using a valid rar index range */
+	if (rar >= rar_entries) {
+		DEBUGOUT("RAR index %d is out of range.\n", rar);
+		return NGBE_ERR_INVALID_ARGUMENT;
+	}
+
+	wr32(hw, NGBE_ETHADDRIDX, rar);
+
+	mpsar = rd32(hw, NGBE_ETHADDRASS);
+	mpsar |= 1 << vmdq;
+	wr32(hw, NGBE_ETHADDRASS, mpsar);
+
+	return 0;
+}
+
+/**
+ *  ngbe_init_uta_tables - Initialize the Unicast Table Array
+ *  @hw: pointer to hardware structure
+ **/
+s32 ngbe_init_uta_tables(struct ngbe_hw *hw)
+{
+	int i;
+
+	DEBUGFUNC("ngbe_init_uta_tables");
+	DEBUGOUT(" Clearing UTA\n");
+
+	for (i = 0; i < 128; i++)
+		wr32(hw, NGBE_UCADDRTBL(i), 0);
+
+	return 0;
+}
+
 /**
  *  ngbe_init_thermal_sensor_thresh - Inits thermal sensor thresholds
  *  @hw: pointer to hardware structure
@@ -481,10 +794,18 @@ s32 ngbe_init_ops_pf(struct ngbe_hw *hw)
 	/* MAC */
 	mac->init_hw = ngbe_init_hw;
 	mac->reset_hw = ngbe_reset_hw_em;
+	mac->get_mac_addr = ngbe_get_mac_addr;
 	mac->stop_hw = ngbe_stop_hw;
 	mac->acquire_swfw_sync = ngbe_acquire_swfw_sync;
 	mac->release_swfw_sync = ngbe_release_swfw_sync;
 
+	/* RAR */
+	mac->set_rar = ngbe_set_rar;
+	mac->clear_rar = ngbe_clear_rar;
+	mac->init_rx_addrs = ngbe_init_rx_addrs;
+	mac->set_vmdq = ngbe_set_vmdq;
+	mac->clear_vmdq = ngbe_clear_vmdq;
+
 	/* Manageability interface */
 	mac->init_thermal_sensor_thresh = ngbe_init_thermal_sensor_thresh;
 	mac->check_overtemp = ngbe_mac_check_overtemp;
@@ -493,6 +814,8 @@ s32 ngbe_init_ops_pf(struct ngbe_hw *hw)
 	rom->init_params = ngbe_init_eeprom_params;
 	rom->validate_checksum = ngbe_validate_eeprom_checksum_em;
 
+	mac->mcft_size		= NGBE_EM_MC_TBL_SIZE;
+	mac->num_rar_entries	= NGBE_EM_RAR_ENTRIES;
 	mac->max_rx_queues	= NGBE_EM_MAX_RX_QUEUES;
 	mac->max_tx_queues	= NGBE_EM_MAX_TX_QUEUES;
 
diff --git a/drivers/net/ngbe/base/ngbe_hw.h b/drivers/net/ngbe/base/ngbe_hw.h
index 3c8e646bb7..0b3d60ae29 100644
--- a/drivers/net/ngbe/base/ngbe_hw.h
+++ b/drivers/net/ngbe/base/ngbe_hw.h
@@ -10,16 +10,29 @@
 
 #define NGBE_EM_MAX_TX_QUEUES 8
 #define NGBE_EM_MAX_RX_QUEUES 8
+#define NGBE_EM_RAR_ENTRIES   32
+#define NGBE_EM_MC_TBL_SIZE   32
 
 s32 ngbe_init_hw(struct ngbe_hw *hw);
 s32 ngbe_reset_hw_em(struct ngbe_hw *hw);
 s32 ngbe_stop_hw(struct ngbe_hw *hw);
+s32 ngbe_get_mac_addr(struct ngbe_hw *hw, u8 *mac_addr);
 
 void ngbe_set_lan_id_multi_port(struct ngbe_hw *hw);
 
+s32 ngbe_set_rar(struct ngbe_hw *hw, u32 index, u8 *addr, u32 vmdq,
+			  u32 enable_addr);
+s32 ngbe_clear_rar(struct ngbe_hw *hw, u32 index);
+s32 ngbe_init_rx_addrs(struct ngbe_hw *hw);
+
+s32 ngbe_validate_mac_addr(u8 *mac_addr);
 s32 ngbe_acquire_swfw_sync(struct ngbe_hw *hw, u32 mask);
 void ngbe_release_swfw_sync(struct ngbe_hw *hw, u32 mask);
 
+s32 ngbe_set_vmdq(struct ngbe_hw *hw, u32 rar, u32 vmdq);
+s32 ngbe_clear_vmdq(struct ngbe_hw *hw, u32 rar, u32 vmdq);
+s32 ngbe_init_uta_tables(struct ngbe_hw *hw);
+
 s32 ngbe_init_thermal_sensor_thresh(struct ngbe_hw *hw);
 s32 ngbe_mac_check_overtemp(struct ngbe_hw *hw);
 void ngbe_disable_rx(struct ngbe_hw *hw);
diff --git a/drivers/net/ngbe/base/ngbe_osdep.h b/drivers/net/ngbe/base/ngbe_osdep.h
index 94cc10315e..8c2a1271cb 100644
--- a/drivers/net/ngbe/base/ngbe_osdep.h
+++ b/drivers/net/ngbe/base/ngbe_osdep.h
@@ -18,6 +18,7 @@
 #include <rte_byteorder.h>
 #include <rte_config.h>
 #include <rte_io.h>
+#include <rte_ether.h>
 
 #include "../ngbe_logs.h"
 
diff --git a/drivers/net/ngbe/base/ngbe_type.h b/drivers/net/ngbe/base/ngbe_type.h
index b5c05e0f2f..5add9ec2a3 100644
--- a/drivers/net/ngbe/base/ngbe_type.h
+++ b/drivers/net/ngbe/base/ngbe_type.h
@@ -62,6 +62,10 @@ enum ngbe_media_type {
 
 struct ngbe_hw;
 
+struct ngbe_addr_filter_info {
+	u32 mta_in_use;
+};
+
 /* Bus parameters */
 struct ngbe_bus_info {
 	void (*set_lan_id)(struct ngbe_hw *hw);
@@ -88,14 +92,28 @@ struct ngbe_mac_info {
 	s32 (*init_hw)(struct ngbe_hw *hw);
 	s32 (*reset_hw)(struct ngbe_hw *hw);
 	s32 (*stop_hw)(struct ngbe_hw *hw);
+	s32 (*get_mac_addr)(struct ngbe_hw *hw, u8 *mac_addr);
 	s32 (*acquire_swfw_sync)(struct ngbe_hw *hw, u32 mask);
 	void (*release_swfw_sync)(struct ngbe_hw *hw, u32 mask);
 
+	/* RAR */
+	s32 (*set_rar)(struct ngbe_hw *hw, u32 index, u8 *addr, u32 vmdq,
+			  u32 enable_addr);
+	s32 (*clear_rar)(struct ngbe_hw *hw, u32 index);
+	s32 (*set_vmdq)(struct ngbe_hw *hw, u32 rar, u32 vmdq);
+	s32 (*clear_vmdq)(struct ngbe_hw *hw, u32 rar, u32 vmdq);
+	s32 (*init_rx_addrs)(struct ngbe_hw *hw);
+
 	/* Manageability interface */
 	s32 (*init_thermal_sensor_thresh)(struct ngbe_hw *hw);
 	s32 (*check_overtemp)(struct ngbe_hw *hw);
 
 	enum ngbe_mac_type type;
+	u8 addr[ETH_ADDR_LEN];
+	u8 perm_addr[ETH_ADDR_LEN];
+	s32 mc_filter_type;
+	u32 mcft_size;
+	u32 num_rar_entries;
 	u32 max_tx_queues;
 	u32 max_rx_queues;
 	struct ngbe_thermal_sensor_data  thermal_sensor_data;
@@ -127,6 +145,7 @@ struct ngbe_hw {
 	void IOMEM *hw_addr;
 	void *back;
 	struct ngbe_mac_info mac;
+	struct ngbe_addr_filter_info addr_ctrl;
 	struct ngbe_phy_info phy;
 	struct ngbe_rom_info rom;
 	struct ngbe_bus_info bus;
diff --git a/drivers/net/ngbe/ngbe_ethdev.c b/drivers/net/ngbe/ngbe_ethdev.c
index bb5923c485..e9ddbe9753 100644
--- a/drivers/net/ngbe/ngbe_ethdev.c
+++ b/drivers/net/ngbe/ngbe_ethdev.c
@@ -116,6 +116,31 @@ eth_ngbe_dev_init(struct rte_eth_dev *eth_dev, void *init_params __rte_unused)
 		return -EIO;
 	}
 
+	/* Allocate memory for storing MAC addresses */
+	eth_dev->data->mac_addrs = rte_zmalloc("ngbe", RTE_ETHER_ADDR_LEN *
+					       hw->mac.num_rar_entries, 0);
+	if (eth_dev->data->mac_addrs == NULL) {
+		PMD_INIT_LOG(ERR,
+			     "Failed to allocate %u bytes needed to store "
+			     "MAC addresses",
+			     RTE_ETHER_ADDR_LEN * hw->mac.num_rar_entries);
+		return -ENOMEM;
+	}
+
+	/* Copy the permanent MAC address */
+	rte_ether_addr_copy((struct rte_ether_addr *)hw->mac.perm_addr,
+			&eth_dev->data->mac_addrs[0]);
+
+	/* Allocate memory for storing hash filter MAC addresses */
+	eth_dev->data->hash_mac_addrs = rte_zmalloc("ngbe",
+			RTE_ETHER_ADDR_LEN * NGBE_VMDQ_NUM_UC_MAC, 0);
+	if (eth_dev->data->hash_mac_addrs == NULL) {
+		PMD_INIT_LOG(ERR,
+			     "Failed to allocate %d bytes needed to store MAC addresses",
+			     RTE_ETHER_ADDR_LEN * NGBE_VMDQ_NUM_UC_MAC);
+		return -ENOMEM;
+	}
+
 	return 0;
 }
 
diff --git a/drivers/net/ngbe/ngbe_ethdev.h b/drivers/net/ngbe/ngbe_ethdev.h
index f6cee4a4a9..5917ff02aa 100644
--- a/drivers/net/ngbe/ngbe_ethdev.h
+++ b/drivers/net/ngbe/ngbe_ethdev.h
@@ -19,4 +19,6 @@ struct ngbe_adapter {
 #define NGBE_DEV_HW(dev) \
 	(&((struct ngbe_adapter *)(dev)->data->dev_private)->hw)
 
+#define NGBE_VMDQ_NUM_UC_MAC         4096 /* Maximum nb. of UC MAC addr. */
+
 #endif /* _NGBE_ETHDEV_H_ */
-- 
2.27.0




  parent reply	other threads:[~2021-06-02  9:41 UTC|newest]

Thread overview: 51+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-02  9:40 [dpdk-dev] [PATCH v5 00/24] net: ngbe PMD Jiawen Wu
2021-06-02  9:40 ` [dpdk-dev] [PATCH v5 01/24] net/ngbe: add build and doc infrastructure Jiawen Wu
2021-06-14 17:05   ` Andrew Rybchenko
2021-06-02  9:40 ` [dpdk-dev] [PATCH v5 02/24] net/ngbe: add device IDs Jiawen Wu
2021-06-14 17:08   ` Andrew Rybchenko
2021-06-15  2:52     ` Jiawen Wu
2021-06-02  9:40 ` [dpdk-dev] [PATCH v5 03/24] net/ngbe: support probe and remove Jiawen Wu
2021-06-14 17:27   ` Andrew Rybchenko
2021-06-02  9:40 ` [dpdk-dev] [PATCH v5 04/24] net/ngbe: add device init and uninit Jiawen Wu
2021-06-14 17:36   ` Andrew Rybchenko
2021-06-02  9:40 ` [dpdk-dev] [PATCH v5 05/24] net/ngbe: add log type and error type Jiawen Wu
2021-06-14 17:54   ` Andrew Rybchenko
2021-06-15  7:13     ` Jiawen Wu
2021-07-01 13:57   ` David Marchand
2021-07-02  2:08     ` Jiawen Wu
2021-06-02  9:40 ` [dpdk-dev] [PATCH v5 06/24] net/ngbe: define registers Jiawen Wu
2021-06-02  9:40 ` [dpdk-dev] [PATCH v5 07/24] net/ngbe: set MAC type and LAN id Jiawen Wu
2021-06-02  9:40 ` [dpdk-dev] [PATCH v5 08/24] net/ngbe: init and validate EEPROM Jiawen Wu
2021-06-02  9:40 ` [dpdk-dev] [PATCH v5 09/24] net/ngbe: add HW initialization Jiawen Wu
2021-06-14 18:01   ` Andrew Rybchenko
2021-06-02  9:40 ` [dpdk-dev] [PATCH v5 10/24] net/ngbe: identify PHY and reset PHY Jiawen Wu
2021-06-02  9:40 ` Jiawen Wu [this message]
2021-06-02  9:40 ` [dpdk-dev] [PATCH v5 12/24] net/ngbe: add info get operation Jiawen Wu
2021-06-14 18:13   ` Andrew Rybchenko
2021-06-02  9:40 ` [dpdk-dev] [PATCH v5 13/24] net/ngbe: support link update Jiawen Wu
2021-06-14 18:45   ` Andrew Rybchenko
2021-06-02  9:40 ` [dpdk-dev] [PATCH v5 14/24] net/ngbe: setup the check PHY link Jiawen Wu
2021-06-02  9:40 ` [dpdk-dev] [PATCH v5 15/24] net/ngbe: add Rx queue setup and release Jiawen Wu
2021-06-14 18:53   ` Andrew Rybchenko
2021-06-15  7:50     ` Jiawen Wu
2021-06-15  8:06       ` Andrew Rybchenko
2021-06-02  9:41 ` [dpdk-dev] [PATCH v5 16/24] net/ngbe: add Tx " Jiawen Wu
2021-06-14 18:59   ` Andrew Rybchenko
2021-06-02  9:41 ` [dpdk-dev] [PATCH v5 17/24] net/ngbe: add Rx and Tx init Jiawen Wu
2021-06-14 19:01   ` Andrew Rybchenko
2021-06-02  9:41 ` [dpdk-dev] [PATCH v5 18/24] net/ngbe: add packet type Jiawen Wu
2021-06-14 19:06   ` Andrew Rybchenko
2021-06-02  9:41 ` [dpdk-dev] [PATCH v5 19/24] net/ngbe: add simple Rx and Tx flow Jiawen Wu
2021-06-14 19:10   ` Andrew Rybchenko
2021-06-02  9:41 ` [dpdk-dev] [PATCH v5 20/24] net/ngbe: support bulk and scatter Rx Jiawen Wu
2021-06-14 19:17   ` Andrew Rybchenko
2021-06-02  9:41 ` [dpdk-dev] [PATCH v5 21/24] net/ngbe: support full-featured Tx path Jiawen Wu
2021-06-14 19:22   ` Andrew Rybchenko
2021-06-14 19:23     ` Andrew Rybchenko
2021-06-02  9:41 ` [dpdk-dev] [PATCH v5 22/24] net/ngbe: add device start operation Jiawen Wu
2021-06-14 19:33   ` Andrew Rybchenko
2021-06-02  9:41 ` [dpdk-dev] [PATCH v5 23/24] net/ngbe: start and stop RxTx Jiawen Wu
2021-06-14 20:44   ` Andrew Rybchenko
2021-06-02  9:41 ` [dpdk-dev] [PATCH v5 24/24] net/ngbe: add device stop operation Jiawen Wu
2021-06-11  1:38 ` [dpdk-dev] [PATCH v5 00/24] net: ngbe PMD Jiawen Wu
2021-06-14 20:56 ` Andrew Rybchenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210602094108.1575640-12-jiawenwu@trustnetic.com \
    --to=jiawenwu@trustnetic.com \
    --cc=dev@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).