DPDK patches and discussions
 help / color / mirror / Atom feed
From: Jiawen Wu <jiawenwu@trustnetic.com>
To: dev@dpdk.org
Cc: Jiawen Wu <jiawenwu@trustnetic.com>
Subject: [dpdk-dev] [PATCH v5 05/24] net/ngbe: add log type and error type
Date: Wed,  2 Jun 2021 17:40:49 +0800	[thread overview]
Message-ID: <20210602094108.1575640-6-jiawenwu@trustnetic.com> (raw)
In-Reply-To: <20210602094108.1575640-1-jiawenwu@trustnetic.com>

Add log type and error type to trace functions.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
---
 doc/guides/nics/ngbe.rst            |  20 +++++
 drivers/net/ngbe/base/ngbe_status.h | 125 ++++++++++++++++++++++++++++
 drivers/net/ngbe/base/ngbe_type.h   |   1 +
 drivers/net/ngbe/ngbe_ethdev.c      |  16 ++++
 drivers/net/ngbe/ngbe_logs.h        |  46 ++++++++++
 5 files changed, 208 insertions(+)
 create mode 100644 drivers/net/ngbe/base/ngbe_status.h
 create mode 100644 drivers/net/ngbe/ngbe_logs.h

diff --git a/doc/guides/nics/ngbe.rst b/doc/guides/nics/ngbe.rst
index 4ec2623a05..c274a15aab 100644
--- a/doc/guides/nics/ngbe.rst
+++ b/doc/guides/nics/ngbe.rst
@@ -15,6 +15,26 @@ Prerequisites
 
 - Follow the DPDK :ref:`Getting Started Guide for Linux <linux_gsg>` to setup the basic DPDK environment.
 
+Pre-Installation Configuration
+------------------------------
+
+Dynamic Logging Parameters
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+One may leverage EAL option "--log-level" to change default levels
+for the log types supported by the driver. The option is used with
+an argument typically consisting of two parts separated by a colon.
+
+NGBE PMD provides the following log types available for control:
+
+- ``pmd.net.ngbe.driver`` (default level is **notice**)
+
+  Affects driver-wide messages unrelated to any particular devices.
+
+- ``pmd.net.ngbe.init`` (default level is **notice**)
+
+  Extra logging of the messages during PMD initialization.
+
 Driver compilation and testing
 ------------------------------
 
diff --git a/drivers/net/ngbe/base/ngbe_status.h b/drivers/net/ngbe/base/ngbe_status.h
new file mode 100644
index 0000000000..b1836c6479
--- /dev/null
+++ b/drivers/net/ngbe/base/ngbe_status.h
@@ -0,0 +1,125 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2018-2020 Beijing WangXun Technology Co., Ltd.
+ * Copyright(c) 2010-2017 Intel Corporation
+ */
+
+#ifndef _NGBE_STATUS_H_
+#define _NGBE_STATUS_H_
+
+/* Error Codes:
+ * common error
+ * module error(simple)
+ * module error(detailed)
+ *
+ * (-256, 256): reserved for non-ngbe defined error code
+ */
+#define TERR_BASE (0x100)
+enum ngbe_error {
+	TERR_NULL = TERR_BASE,
+	TERR_ANY,
+	TERR_NOSUPP,
+	TERR_NOIMPL,
+	TERR_NOMEM,
+	TERR_NOSPACE,
+	TERR_NOENTRY,
+	TERR_CONFIG,
+	TERR_ARGS,
+	TERR_PARAM,
+	TERR_INVALID,
+	TERR_TIMEOUT,
+	TERR_VERSION,
+	TERR_REGISTER,
+	TERR_FEATURE,
+	TERR_RESET,
+	TERR_AUTONEG,
+	TERR_MBX,
+	TERR_I2C,
+	TERR_FC,
+	TERR_FLASH,
+	TERR_DEVICE,
+	TERR_HOSTIF,
+	TERR_SRAM,
+	TERR_EEPROM,
+	TERR_EEPROM_CHECKSUM,
+	TERR_EEPROM_PROTECT,
+	TERR_EEPROM_VERSION,
+	TERR_MAC,
+	TERR_MAC_ADDR,
+	TERR_SFP,
+	TERR_SFP_INITSEQ,
+	TERR_SFP_PRESENT,
+	TERR_SFP_SUPPORT,
+	TERR_SFP_SETUP,
+	TERR_PHY,
+	TERR_PHY_ADDR,
+	TERR_PHY_INIT,
+	TERR_FDIR_CMD,
+	TERR_FDIR_REINIT,
+	TERR_SWFW_SYNC,
+	TERR_SWFW_COMMAND,
+	TERR_FC_CFG,
+	TERR_FC_NEGO,
+	TERR_LINK_SETUP,
+	TERR_PCIE_PENDING,
+	TERR_PBA_SECTION,
+	TERR_OVERTEMP,
+	TERR_UNDERTEMP,
+	TERR_XPCS_POWERUP,
+};
+
+/* WARNING: just for legacy compatibility */
+#define NGBE_NOT_IMPLEMENTED 0x7FFFFFFF
+#define NGBE_ERR_OPS_DUMMY   0x3FFFFFFF
+
+/* Error Codes */
+#define NGBE_ERR_EEPROM				-(TERR_BASE + 1)
+#define NGBE_ERR_EEPROM_CHECKSUM		-(TERR_BASE + 2)
+#define NGBE_ERR_PHY				-(TERR_BASE + 3)
+#define NGBE_ERR_CONFIG				-(TERR_BASE + 4)
+#define NGBE_ERR_PARAM				-(TERR_BASE + 5)
+#define NGBE_ERR_MAC_TYPE			-(TERR_BASE + 6)
+#define NGBE_ERR_UNKNOWN_PHY			-(TERR_BASE + 7)
+#define NGBE_ERR_LINK_SETUP			-(TERR_BASE + 8)
+#define NGBE_ERR_ADAPTER_STOPPED		-(TERR_BASE + 9)
+#define NGBE_ERR_INVALID_MAC_ADDR		-(TERR_BASE + 10)
+#define NGBE_ERR_DEVICE_NOT_SUPPORTED		-(TERR_BASE + 11)
+#define NGBE_ERR_MASTER_REQUESTS_PENDING	-(TERR_BASE + 12)
+#define NGBE_ERR_INVALID_LINK_SETTINGS		-(TERR_BASE + 13)
+#define NGBE_ERR_AUTONEG_NOT_COMPLETE		-(TERR_BASE + 14)
+#define NGBE_ERR_RESET_FAILED			-(TERR_BASE + 15)
+#define NGBE_ERR_SWFW_SYNC			-(TERR_BASE + 16)
+#define NGBE_ERR_PHY_ADDR_INVALID		-(TERR_BASE + 17)
+#define NGBE_ERR_I2C				-(TERR_BASE + 18)
+#define NGBE_ERR_SFP_NOT_SUPPORTED		-(TERR_BASE + 19)
+#define NGBE_ERR_SFP_NOT_PRESENT		-(TERR_BASE + 20)
+#define NGBE_ERR_SFP_NO_INIT_SEQ_PRESENT	-(TERR_BASE + 21)
+#define NGBE_ERR_NO_SAN_ADDR_PTR		-(TERR_BASE + 22)
+#define NGBE_ERR_FDIR_REINIT_FAILED		-(TERR_BASE + 23)
+#define NGBE_ERR_EEPROM_VERSION			-(TERR_BASE + 24)
+#define NGBE_ERR_NO_SPACE			-(TERR_BASE + 25)
+#define NGBE_ERR_OVERTEMP			-(TERR_BASE + 26)
+#define NGBE_ERR_FC_NOT_NEGOTIATED		-(TERR_BASE + 27)
+#define NGBE_ERR_FC_NOT_SUPPORTED		-(TERR_BASE + 28)
+#define NGBE_ERR_SFP_SETUP_NOT_COMPLETE		-(TERR_BASE + 30)
+#define NGBE_ERR_PBA_SECTION			-(TERR_BASE + 31)
+#define NGBE_ERR_INVALID_ARGUMENT		-(TERR_BASE + 32)
+#define NGBE_ERR_HOST_INTERFACE_COMMAND		-(TERR_BASE + 33)
+#define NGBE_ERR_OUT_OF_MEM			-(TERR_BASE + 34)
+#define NGBE_ERR_FEATURE_NOT_SUPPORTED		-(TERR_BASE + 36)
+#define NGBE_ERR_EEPROM_PROTECTED_REGION	-(TERR_BASE + 37)
+#define NGBE_ERR_FDIR_CMD_INCOMPLETE		-(TERR_BASE + 38)
+#define NGBE_ERR_FW_RESP_INVALID		-(TERR_BASE + 39)
+#define NGBE_ERR_TOKEN_RETRY			-(TERR_BASE + 40)
+#define NGBE_ERR_FLASH_LOADING_FAILED		-(TERR_BASE + 41)
+
+#define NGBE_ERR_NOSUPP                        -(TERR_BASE + 42)
+#define NGBE_ERR_UNDERTEMP                     -(TERR_BASE + 43)
+#define NGBE_ERR_XPCS_POWER_UP_FAILED          -(TERR_BASE + 44)
+#define NGBE_ERR_PHY_INIT_NOT_DONE             -(TERR_BASE + 45)
+#define NGBE_ERR_TIMEOUT                       -(TERR_BASE + 46)
+#define NGBE_ERR_REGISTER                      -(TERR_BASE + 47)
+#define NGBE_ERR_MNG_ACCESS_FAILED             -(TERR_BASE + 49)
+#define NGBE_ERR_PHY_TYPE                      -(TERR_BASE + 50)
+#define NGBE_ERR_PHY_TIMEOUT                   -(TERR_BASE + 51)
+
+#endif /* _NGBE_STATUS_H_ */
diff --git a/drivers/net/ngbe/base/ngbe_type.h b/drivers/net/ngbe/base/ngbe_type.h
index b6bde11dcd..bcc9f74216 100644
--- a/drivers/net/ngbe/base/ngbe_type.h
+++ b/drivers/net/ngbe/base/ngbe_type.h
@@ -8,6 +8,7 @@
 
 #define NGBE_ALIGN		128 /* as intel did */
 
+#include "ngbe_status.h"
 #include "ngbe_osdep.h"
 #include "ngbe_devids.h"
 
diff --git a/drivers/net/ngbe/ngbe_ethdev.c b/drivers/net/ngbe/ngbe_ethdev.c
index 3431a9a9a7..f24c3e173e 100644
--- a/drivers/net/ngbe/ngbe_ethdev.c
+++ b/drivers/net/ngbe/ngbe_ethdev.c
@@ -6,6 +6,7 @@
 #include <rte_common.h>
 #include <ethdev_pci.h>
 
+#include "ngbe_logs.h"
 #include "base/ngbe.h"
 #include "ngbe_ethdev.h"
 
@@ -37,6 +38,8 @@ eth_ngbe_dev_init(struct rte_eth_dev *eth_dev, void *init_params __rte_unused)
 	struct ngbe_hw *hw = NGBE_DEV_HW(eth_dev);
 	const struct rte_memzone *mz;
 
+	PMD_INIT_FUNC_TRACE();
+
 	if (rte_eal_process_type() != RTE_PROC_PRIMARY)
 		return 0;
 
@@ -65,6 +68,8 @@ eth_ngbe_dev_init(struct rte_eth_dev *eth_dev, void *init_params __rte_unused)
 static int
 eth_ngbe_dev_uninit(struct rte_eth_dev *eth_dev)
 {
+	PMD_INIT_FUNC_TRACE();
+
 	if (rte_eal_process_type() != RTE_PROC_PRIMARY)
 		return 0;
 
@@ -115,6 +120,8 @@ static struct rte_pci_driver rte_ngbe_pmd = {
 static int
 ngbe_dev_close(struct rte_eth_dev *dev)
 {
+	PMD_INIT_FUNC_TRACE();
+
 	RTE_SET_USED(dev);
 
 	return 0;
@@ -124,3 +131,12 @@ RTE_PMD_REGISTER_PCI(net_ngbe, rte_ngbe_pmd);
 RTE_PMD_REGISTER_PCI_TABLE(net_ngbe, pci_id_ngbe_map);
 RTE_PMD_REGISTER_KMOD_DEP(net_ngbe, "* igb_uio | uio_pci_generic | vfio-pci");
 
+RTE_LOG_REGISTER(ngbe_logtype_init, pmd.net.ngbe.init, NOTICE);
+RTE_LOG_REGISTER(ngbe_logtype_driver, pmd.net.ngbe.driver, NOTICE);
+
+#ifdef RTE_ETHDEV_DEBUG_RX
+	RTE_LOG_REGISTER(ngbe_logtype_rx, pmd.net.ngbe.rx, DEBUG);
+#endif
+#ifdef RTE_ETHDEV_DEBUG_TX
+	RTE_LOG_REGISTER(ngbe_logtype_tx, pmd.net.ngbe.tx, DEBUG);
+#endif
diff --git a/drivers/net/ngbe/ngbe_logs.h b/drivers/net/ngbe/ngbe_logs.h
new file mode 100644
index 0000000000..c5d1ab0930
--- /dev/null
+++ b/drivers/net/ngbe/ngbe_logs.h
@@ -0,0 +1,46 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2018-2020 Beijing WangXun Technology Co., Ltd.
+ * Copyright(c) 2010-2017 Intel Corporation
+ */
+
+#ifndef _NGBE_LOGS_H_
+#define _NGBE_LOGS_H_
+
+/*
+ * PMD_USER_LOG: for user
+ */
+extern int ngbe_logtype_init;
+#define PMD_INIT_LOG(level, fmt, args...) \
+	rte_log(RTE_LOG_ ## level, ngbe_logtype_init, \
+		"%s(): " fmt "\n", __func__, ##args)
+
+extern int ngbe_logtype_driver;
+#define PMD_DRV_LOG(level, fmt, args...) \
+	rte_log(RTE_LOG_ ## level, ngbe_logtype_driver, \
+		"%s(): " fmt "\n", __func__, ##args)
+
+#ifdef RTE_ETHDEV_DEBUG_RX
+extern int ngbe_logtype_rx;
+#define PMD_RX_LOG(level, fmt, args...) \
+	rte_log(RTE_LOG_ ## level, ngbe_logtype_rx,	\
+		"%s(): " fmt "\n", __func__, ##args)
+#else
+#define PMD_RX_LOG(level, fmt, args...) do { } while (0)
+#endif
+
+#ifdef RTE_ETHDEV_DEBUG_TX
+extern int ngbe_logtype_tx;
+#define PMD_TX_LOG(level, fmt, args...) \
+	rte_log(RTE_LOG_ ## level, ngbe_logtype_tx,	\
+		"%s(): " fmt "\n", __func__, ##args)
+#else
+#define PMD_TX_LOG(level, fmt, args...) do { } while (0)
+#endif
+
+#define TLOG_DEBUG(fmt, args...)  PMD_DRV_LOG(DEBUG, fmt, ##args)
+
+#define DEBUGOUT(fmt, args...)    TLOG_DEBUG(fmt, ##args)
+#define PMD_INIT_FUNC_TRACE()     TLOG_DEBUG(" >>")
+#define DEBUGFUNC(fmt)            TLOG_DEBUG(fmt)
+
+#endif /* _NGBE_LOGS_H_ */
-- 
2.27.0




  parent reply	other threads:[~2021-06-02  9:40 UTC|newest]

Thread overview: 51+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-02  9:40 [dpdk-dev] [PATCH v5 00/24] net: ngbe PMD Jiawen Wu
2021-06-02  9:40 ` [dpdk-dev] [PATCH v5 01/24] net/ngbe: add build and doc infrastructure Jiawen Wu
2021-06-14 17:05   ` Andrew Rybchenko
2021-06-02  9:40 ` [dpdk-dev] [PATCH v5 02/24] net/ngbe: add device IDs Jiawen Wu
2021-06-14 17:08   ` Andrew Rybchenko
2021-06-15  2:52     ` Jiawen Wu
2021-06-02  9:40 ` [dpdk-dev] [PATCH v5 03/24] net/ngbe: support probe and remove Jiawen Wu
2021-06-14 17:27   ` Andrew Rybchenko
2021-06-02  9:40 ` [dpdk-dev] [PATCH v5 04/24] net/ngbe: add device init and uninit Jiawen Wu
2021-06-14 17:36   ` Andrew Rybchenko
2021-06-02  9:40 ` Jiawen Wu [this message]
2021-06-14 17:54   ` [dpdk-dev] [PATCH v5 05/24] net/ngbe: add log type and error type Andrew Rybchenko
2021-06-15  7:13     ` Jiawen Wu
2021-07-01 13:57   ` David Marchand
2021-07-02  2:08     ` Jiawen Wu
2021-06-02  9:40 ` [dpdk-dev] [PATCH v5 06/24] net/ngbe: define registers Jiawen Wu
2021-06-02  9:40 ` [dpdk-dev] [PATCH v5 07/24] net/ngbe: set MAC type and LAN id Jiawen Wu
2021-06-02  9:40 ` [dpdk-dev] [PATCH v5 08/24] net/ngbe: init and validate EEPROM Jiawen Wu
2021-06-02  9:40 ` [dpdk-dev] [PATCH v5 09/24] net/ngbe: add HW initialization Jiawen Wu
2021-06-14 18:01   ` Andrew Rybchenko
2021-06-02  9:40 ` [dpdk-dev] [PATCH v5 10/24] net/ngbe: identify PHY and reset PHY Jiawen Wu
2021-06-02  9:40 ` [dpdk-dev] [PATCH v5 11/24] net/ngbe: store MAC address Jiawen Wu
2021-06-02  9:40 ` [dpdk-dev] [PATCH v5 12/24] net/ngbe: add info get operation Jiawen Wu
2021-06-14 18:13   ` Andrew Rybchenko
2021-06-02  9:40 ` [dpdk-dev] [PATCH v5 13/24] net/ngbe: support link update Jiawen Wu
2021-06-14 18:45   ` Andrew Rybchenko
2021-06-02  9:40 ` [dpdk-dev] [PATCH v5 14/24] net/ngbe: setup the check PHY link Jiawen Wu
2021-06-02  9:40 ` [dpdk-dev] [PATCH v5 15/24] net/ngbe: add Rx queue setup and release Jiawen Wu
2021-06-14 18:53   ` Andrew Rybchenko
2021-06-15  7:50     ` Jiawen Wu
2021-06-15  8:06       ` Andrew Rybchenko
2021-06-02  9:41 ` [dpdk-dev] [PATCH v5 16/24] net/ngbe: add Tx " Jiawen Wu
2021-06-14 18:59   ` Andrew Rybchenko
2021-06-02  9:41 ` [dpdk-dev] [PATCH v5 17/24] net/ngbe: add Rx and Tx init Jiawen Wu
2021-06-14 19:01   ` Andrew Rybchenko
2021-06-02  9:41 ` [dpdk-dev] [PATCH v5 18/24] net/ngbe: add packet type Jiawen Wu
2021-06-14 19:06   ` Andrew Rybchenko
2021-06-02  9:41 ` [dpdk-dev] [PATCH v5 19/24] net/ngbe: add simple Rx and Tx flow Jiawen Wu
2021-06-14 19:10   ` Andrew Rybchenko
2021-06-02  9:41 ` [dpdk-dev] [PATCH v5 20/24] net/ngbe: support bulk and scatter Rx Jiawen Wu
2021-06-14 19:17   ` Andrew Rybchenko
2021-06-02  9:41 ` [dpdk-dev] [PATCH v5 21/24] net/ngbe: support full-featured Tx path Jiawen Wu
2021-06-14 19:22   ` Andrew Rybchenko
2021-06-14 19:23     ` Andrew Rybchenko
2021-06-02  9:41 ` [dpdk-dev] [PATCH v5 22/24] net/ngbe: add device start operation Jiawen Wu
2021-06-14 19:33   ` Andrew Rybchenko
2021-06-02  9:41 ` [dpdk-dev] [PATCH v5 23/24] net/ngbe: start and stop RxTx Jiawen Wu
2021-06-14 20:44   ` Andrew Rybchenko
2021-06-02  9:41 ` [dpdk-dev] [PATCH v5 24/24] net/ngbe: add device stop operation Jiawen Wu
2021-06-11  1:38 ` [dpdk-dev] [PATCH v5 00/24] net: ngbe PMD Jiawen Wu
2021-06-14 20:56 ` Andrew Rybchenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210602094108.1575640-6-jiawenwu@trustnetic.com \
    --to=jiawenwu@trustnetic.com \
    --cc=dev@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).