From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mails.dpdk.org (mails.dpdk.org [217.70.189.124]) by inbox.dpdk.org (Postfix) with ESMTP id C54CCA0C4D; Thu, 17 Jun 2021 12:59:25 +0200 (CEST) Received: from [217.70.189.124] (localhost [127.0.0.1]) by mails.dpdk.org (Postfix) with ESMTP id 99A2D4114A; Thu, 17 Jun 2021 12:58:29 +0200 (CEST) Received: from smtpbg511.qq.com (smtpbg511.qq.com [203.205.250.109]) by mails.dpdk.org (Postfix) with ESMTP id 9A8D9410E7 for ; Thu, 17 Jun 2021 12:58:26 +0200 (CEST) X-QQ-mid: bizesmtp46t1623927503t0ef9w95 Received: from wxdbg.localdomain.com (unknown [183.129.236.74]) by esmtp6.qq.com (ESMTP) with id ; Thu, 17 Jun 2021 18:58:22 +0800 (CST) X-QQ-SSF: 01400000000000D0E000B00A0000000 X-QQ-FEAT: O02On8uoBFMh3K2p5VxQh9S9yhszNy/17Z4nY7u3b5GyN70Nj7TYAIclU+fQz TYKqi/pjIkVhrW1fKtkcnjdUptGV+3ZQsS9pzjgqlELnypHMeuq8DMHG5bqIAUzmupiYp23 kGjM8AD16iKCYwD4rXIhOv3VYx5MD+PiNfHW6ibQ3D0G7Rh9DOmlv5PRMCrykBWzDqsZp0N 2/VcNIjKIEYY8L8I/2YxeRKbec28PAwKDEtoAK/KGPJ7A4/0yzPM+VR+3BPJVeke5R1f0V9 gAql9E0HUr1XbVTIc0Rau5okOAeDK6cy+CXur8tXGaoj20gjx14JSRvgD8W0pYoKlBd1NTj +TeTDcuQd/GMjZpbGk4Q5qBij5DpA== X-QQ-GoodBg: 2 From: Jiawen Wu To: dev@dpdk.org Cc: Jiawen Wu Date: Thu, 17 Jun 2021 18:59:56 +0800 Message-Id: <20210617110005.4132926-11-jiawenwu@trustnetic.com> X-Mailer: git-send-email 2.27.0 In-Reply-To: <20210617110005.4132926-1-jiawenwu@trustnetic.com> References: <20210617110005.4132926-1-jiawenwu@trustnetic.com> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-QQ-SENDSIZE: 520 Feedback-ID: bizesmtp:trustnetic.com:qybgforeign:qybgforeign2 X-QQ-Bgrelay: 1 Subject: [dpdk-dev] [PATCH v6 10/19] net/ngbe: support link update X-BeenThere: dev@dpdk.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: DPDK patches and discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: dev-bounces@dpdk.org Sender: "dev" Register to handle device interrupt. Signed-off-by: Jiawen Wu --- doc/guides/nics/features/ngbe.ini | 3 + doc/guides/nics/ngbe.rst | 5 + drivers/net/ngbe/base/ngbe_dummy.h | 6 + drivers/net/ngbe/base/ngbe_type.h | 11 + drivers/net/ngbe/ngbe_ethdev.c | 376 ++++++++++++++++++++++++++++- drivers/net/ngbe/ngbe_ethdev.h | 34 +++ 6 files changed, 434 insertions(+), 1 deletion(-) diff --git a/doc/guides/nics/features/ngbe.ini b/doc/guides/nics/features/ngbe.ini index 977286ac04..291a542a42 100644 --- a/doc/guides/nics/features/ngbe.ini +++ b/doc/guides/nics/features/ngbe.ini @@ -4,6 +4,9 @@ ; Refer to default.ini for the full list of available PMD features. ; [Features] +Speed capabilities = Y +Link status = Y +Link status event = Y Multiprocess aware = Y Linux = Y ARMv8 = Y diff --git a/doc/guides/nics/ngbe.rst b/doc/guides/nics/ngbe.rst index 54d0665db9..0918cc2918 100644 --- a/doc/guides/nics/ngbe.rst +++ b/doc/guides/nics/ngbe.rst @@ -8,6 +8,11 @@ The NGBE PMD (librte_pmd_ngbe) provides poll mode driver support for Wangxun 1 Gigabit Ethernet NICs. +Features +-------- + +- Link state information + Prerequisites ------------- diff --git a/drivers/net/ngbe/base/ngbe_dummy.h b/drivers/net/ngbe/base/ngbe_dummy.h index 8462d6d1cb..4273e5af36 100644 --- a/drivers/net/ngbe/base/ngbe_dummy.h +++ b/drivers/net/ngbe/base/ngbe_dummy.h @@ -64,6 +64,11 @@ static inline void ngbe_mac_release_swfw_sync_dummy(struct ngbe_hw *TUP0, u32 TUP1) { } +static inline s32 ngbe_mac_check_link_dummy(struct ngbe_hw *TUP0, u32 *TUP1, + bool *TUP3, bool TUP4) +{ + return NGBE_ERR_OPS_DUMMY; +} static inline s32 ngbe_mac_set_rar_dummy(struct ngbe_hw *TUP0, u32 TUP1, u8 *TUP2, u32 TUP3, u32 TUP4) { @@ -135,6 +140,7 @@ static inline void ngbe_init_ops_dummy(struct ngbe_hw *hw) hw->mac.get_mac_addr = ngbe_mac_get_mac_addr_dummy; hw->mac.acquire_swfw_sync = ngbe_mac_acquire_swfw_sync_dummy; hw->mac.release_swfw_sync = ngbe_mac_release_swfw_sync_dummy; + hw->mac.check_link = ngbe_mac_check_link_dummy; hw->mac.set_rar = ngbe_mac_set_rar_dummy; hw->mac.clear_rar = ngbe_mac_clear_rar_dummy; hw->mac.set_vmdq = ngbe_mac_set_vmdq_dummy; diff --git a/drivers/net/ngbe/base/ngbe_type.h b/drivers/net/ngbe/base/ngbe_type.h index 517db3380d..04c1cac422 100644 --- a/drivers/net/ngbe/base/ngbe_type.h +++ b/drivers/net/ngbe/base/ngbe_type.h @@ -97,6 +97,8 @@ struct ngbe_mac_info { s32 (*acquire_swfw_sync)(struct ngbe_hw *hw, u32 mask); void (*release_swfw_sync)(struct ngbe_hw *hw, u32 mask); + s32 (*check_link)(struct ngbe_hw *hw, u32 *speed, + bool *link_up, bool link_up_wait_to_complete); /* RAR */ s32 (*set_rar)(struct ngbe_hw *hw, u32 index, u8 *addr, u32 vmdq, u32 enable_addr); @@ -117,6 +119,7 @@ struct ngbe_mac_info { u32 num_rar_entries; u32 max_tx_queues; u32 max_rx_queues; + bool get_link_status; struct ngbe_thermal_sensor_data thermal_sensor_data; bool set_lben; }; @@ -142,6 +145,14 @@ struct ngbe_phy_info { bool reset_disable; }; +enum ngbe_isb_idx { + NGBE_ISB_HEADER, + NGBE_ISB_MISC, + NGBE_ISB_VEC0, + NGBE_ISB_VEC1, + NGBE_ISB_MAX +}; + struct ngbe_hw { void IOMEM *hw_addr; void *back; diff --git a/drivers/net/ngbe/ngbe_ethdev.c b/drivers/net/ngbe/ngbe_ethdev.c index deca64137d..c952023e8b 100644 --- a/drivers/net/ngbe/ngbe_ethdev.c +++ b/drivers/net/ngbe/ngbe_ethdev.c @@ -7,12 +7,17 @@ #include #include +#include + #include "ngbe_logs.h" #include "base/ngbe.h" #include "ngbe_ethdev.h" static int ngbe_dev_close(struct rte_eth_dev *dev); +static void ngbe_dev_interrupt_handler(void *param); +static void ngbe_dev_interrupt_delayed_handler(void *param); + /* * The set of PCI devices this driver supports */ @@ -32,6 +37,28 @@ static const struct rte_pci_id pci_id_ngbe_map[] = { { .vendor_id = 0, /* sentinel */ }, }; +static const struct eth_dev_ops ngbe_eth_dev_ops; + +static inline void +ngbe_enable_intr(struct rte_eth_dev *dev) +{ + struct ngbe_interrupt *intr = ngbe_dev_intr(dev); + struct ngbe_hw *hw = ngbe_dev_hw(dev); + + wr32(hw, NGBE_IENMISC, intr->mask_misc); + wr32(hw, NGBE_IMC(0), intr->mask & BIT_MASK32); + ngbe_flush(hw); +} + +static void +ngbe_disable_intr(struct ngbe_hw *hw) +{ + PMD_INIT_FUNC_TRACE(); + + wr32(hw, NGBE_IMS(0), NGBE_IMS_MASK); + ngbe_flush(hw); +} + /* * Ensure that all locks are released before first NVM or PHY access */ @@ -60,11 +87,15 @@ eth_ngbe_dev_init(struct rte_eth_dev *eth_dev, void *init_params __rte_unused) { struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(eth_dev); struct ngbe_hw *hw = ngbe_dev_hw(eth_dev); + struct rte_intr_handle *intr_handle = &pci_dev->intr_handle; const struct rte_memzone *mz; + uint32_t ctrl_ext; int err; PMD_INIT_FUNC_TRACE(); + eth_dev->dev_ops = &ngbe_eth_dev_ops; + if (rte_eal_process_type() != RTE_PROC_PRIMARY) return 0; @@ -116,6 +147,9 @@ eth_ngbe_dev_init(struct rte_eth_dev *eth_dev, void *init_params __rte_unused) return -EIO; } + /* disable interrupt */ + ngbe_disable_intr(hw); + /* Allocate memory for storing MAC addresses */ eth_dev->data->mac_addrs = rte_zmalloc("ngbe", RTE_ETHER_ADDR_LEN * hw->mac.num_rar_entries, 0); @@ -141,6 +175,23 @@ eth_ngbe_dev_init(struct rte_eth_dev *eth_dev, void *init_params __rte_unused) return -ENOMEM; } + ctrl_ext = rd32(hw, NGBE_PORTCTL); + /* let hardware know driver is loaded */ + ctrl_ext |= NGBE_PORTCTL_DRVLOAD; + /* Set PF Reset Done bit so PF/VF Mail Ops can work */ + ctrl_ext |= NGBE_PORTCTL_RSTDONE; + wr32(hw, NGBE_PORTCTL, ctrl_ext); + ngbe_flush(hw); + + rte_intr_callback_register(intr_handle, + ngbe_dev_interrupt_handler, eth_dev); + + /* enable uio/vfio intr/eventfd mapping */ + rte_intr_enable(intr_handle); + + /* enable support intr */ + ngbe_enable_intr(eth_dev); + return 0; } @@ -180,11 +231,25 @@ static int eth_ngbe_pci_remove(struct rte_pci_device *pci_dev) static struct rte_pci_driver rte_ngbe_pmd = { .id_table = pci_id_ngbe_map, - .drv_flags = RTE_PCI_DRV_NEED_MAPPING, + .drv_flags = RTE_PCI_DRV_NEED_MAPPING | + RTE_PCI_DRV_INTR_LSC, .probe = eth_ngbe_pci_probe, .remove = eth_ngbe_pci_remove, }; +static int +ngbe_dev_configure(struct rte_eth_dev *dev) +{ + struct ngbe_interrupt *intr = ngbe_dev_intr(dev); + + PMD_INIT_FUNC_TRACE(); + + /* set flag to update link status after init */ + intr->flags |= NGBE_FLAG_NEED_LINK_UPDATE; + + return 0; +} + /* * Reset and stop device. */ @@ -198,6 +263,315 @@ ngbe_dev_close(struct rte_eth_dev *dev) return -EINVAL; } +static int +ngbe_dev_info_get(struct rte_eth_dev *dev, struct rte_eth_dev_info *dev_info) +{ + RTE_SET_USED(dev); + + dev_info->speed_capa = ETH_LINK_SPEED_1G | ETH_LINK_SPEED_100M | + ETH_LINK_SPEED_10M; + + return 0; +} + +/* return 0 means link status changed, -1 means not changed */ +int +ngbe_dev_link_update_share(struct rte_eth_dev *dev, + int wait_to_complete) +{ + struct ngbe_hw *hw = ngbe_dev_hw(dev); + struct rte_eth_link link; + u32 link_speed = NGBE_LINK_SPEED_UNKNOWN; + u32 lan_speed = 0; + struct ngbe_interrupt *intr = ngbe_dev_intr(dev); + bool link_up; + int err; + int wait = 1; + + memset(&link, 0, sizeof(link)); + link.link_status = ETH_LINK_DOWN; + link.link_speed = ETH_SPEED_NUM_NONE; + link.link_duplex = ETH_LINK_HALF_DUPLEX; + link.link_autoneg = !(dev->data->dev_conf.link_speeds & + ~ETH_LINK_SPEED_AUTONEG); + + hw->mac.get_link_status = true; + + if (intr->flags & NGBE_FLAG_NEED_LINK_CONFIG) + return rte_eth_linkstatus_set(dev, &link); + + /* check if it needs to wait to complete, if lsc interrupt is enabled */ + if (wait_to_complete == 0 || dev->data->dev_conf.intr_conf.lsc != 0) + wait = 0; + + err = hw->mac.check_link(hw, &link_speed, &link_up, wait); + + if (err != 0) { + link.link_speed = ETH_SPEED_NUM_100M; + link.link_duplex = ETH_LINK_FULL_DUPLEX; + return rte_eth_linkstatus_set(dev, &link); + } + + if (!link_up) + return rte_eth_linkstatus_set(dev, &link); + + intr->flags &= ~NGBE_FLAG_NEED_LINK_CONFIG; + link.link_status = ETH_LINK_UP; + link.link_duplex = ETH_LINK_FULL_DUPLEX; + + switch (link_speed) { + default: + case NGBE_LINK_SPEED_UNKNOWN: + link.link_duplex = ETH_LINK_FULL_DUPLEX; + link.link_speed = ETH_SPEED_NUM_100M; + break; + + case NGBE_LINK_SPEED_10M_FULL: + link.link_speed = ETH_SPEED_NUM_10M; + lan_speed = 0; + break; + + case NGBE_LINK_SPEED_100M_FULL: + link.link_speed = ETH_SPEED_NUM_100M; + lan_speed = 1; + break; + + case NGBE_LINK_SPEED_1GB_FULL: + link.link_speed = ETH_SPEED_NUM_1G; + lan_speed = 2; + break; + } + + if (hw->is_pf) { + wr32m(hw, NGBE_LAN_SPEED, NGBE_LAN_SPEED_MASK, lan_speed); + if (link_speed & (NGBE_LINK_SPEED_1GB_FULL | + NGBE_LINK_SPEED_100M_FULL | NGBE_LINK_SPEED_10M_FULL)) { + wr32m(hw, NGBE_MACTXCFG, NGBE_MACTXCFG_SPEED_MASK, + NGBE_MACTXCFG_SPEED_1G | NGBE_MACTXCFG_TE); + } + } + + return rte_eth_linkstatus_set(dev, &link); +} + +static int +ngbe_dev_link_update(struct rte_eth_dev *dev, int wait_to_complete) +{ + return ngbe_dev_link_update_share(dev, wait_to_complete); +} + +/* + * It reads ICR and sets flag for the link_update. + * + * @param dev + * Pointer to struct rte_eth_dev. + * + * @return + * - On success, zero. + * - On failure, a negative value. + */ +static int +ngbe_dev_interrupt_get_status(struct rte_eth_dev *dev) +{ + uint32_t eicr; + struct ngbe_hw *hw = ngbe_dev_hw(dev); + struct ngbe_interrupt *intr = ngbe_dev_intr(dev); + + /* clear all cause mask */ + ngbe_disable_intr(hw); + + /* read-on-clear nic registers here */ + eicr = ((u32 *)hw->isb_mem)[NGBE_ISB_MISC]; + PMD_DRV_LOG(DEBUG, "eicr %x", eicr); + + intr->flags = 0; + + /* set flag for async link update */ + if (eicr & NGBE_ICRMISC_PHY) + intr->flags |= NGBE_FLAG_NEED_LINK_UPDATE; + + if (eicr & NGBE_ICRMISC_VFMBX) + intr->flags |= NGBE_FLAG_MAILBOX; + + if (eicr & NGBE_ICRMISC_LNKSEC) + intr->flags |= NGBE_FLAG_MACSEC; + + if (eicr & NGBE_ICRMISC_GPIO) + intr->flags |= NGBE_FLAG_NEED_LINK_UPDATE; + + return 0; +} + +/** + * It gets and then prints the link status. + * + * @param dev + * Pointer to struct rte_eth_dev. + * + * @return + * - On success, zero. + * - On failure, a negative value. + */ +static void +ngbe_dev_link_status_print(struct rte_eth_dev *dev) +{ + struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(dev); + struct rte_eth_link link; + + rte_eth_linkstatus_get(dev, &link); + + if (link.link_status == ETH_LINK_UP) { + PMD_INIT_LOG(INFO, "Port %d: Link Up - speed %u Mbps - %s", + (int)(dev->data->port_id), + (unsigned int)link.link_speed, + link.link_duplex == ETH_LINK_FULL_DUPLEX ? + "full-duplex" : "half-duplex"); + } else { + PMD_INIT_LOG(INFO, " Port %d: Link Down", + (int)(dev->data->port_id)); + } + PMD_INIT_LOG(DEBUG, "PCI Address: " PCI_PRI_FMT, + pci_dev->addr.domain, + pci_dev->addr.bus, + pci_dev->addr.devid, + pci_dev->addr.function); +} + +/* + * It executes link_update after knowing an interrupt occurred. + * + * @param dev + * Pointer to struct rte_eth_dev. + * + * @return + * - On success, zero. + * - On failure, a negative value. + */ +static int +ngbe_dev_interrupt_action(struct rte_eth_dev *dev) +{ + struct ngbe_interrupt *intr = ngbe_dev_intr(dev); + int64_t timeout; + + PMD_DRV_LOG(DEBUG, "intr action type %d", intr->flags); + + if (intr->flags & NGBE_FLAG_NEED_LINK_UPDATE) { + struct rte_eth_link link; + + /*get the link status before link update, for predicting later*/ + rte_eth_linkstatus_get(dev, &link); + + ngbe_dev_link_update(dev, 0); + + /* likely to up */ + if (link.link_status != ETH_LINK_UP) + /* handle it 1 sec later, wait it being stable */ + timeout = NGBE_LINK_UP_CHECK_TIMEOUT; + /* likely to down */ + else + /* handle it 4 sec later, wait it being stable */ + timeout = NGBE_LINK_DOWN_CHECK_TIMEOUT; + + ngbe_dev_link_status_print(dev); + if (rte_eal_alarm_set(timeout * 1000, + ngbe_dev_interrupt_delayed_handler, + (void *)dev) < 0) { + PMD_DRV_LOG(ERR, "Error setting alarm"); + } else { + /* remember original mask */ + intr->mask_misc_orig = intr->mask_misc; + /* only disable lsc interrupt */ + intr->mask_misc &= ~NGBE_ICRMISC_PHY; + + intr->mask_orig = intr->mask; + /* only disable all misc interrupts */ + intr->mask &= ~(1ULL << NGBE_MISC_VEC_ID); + } + } + + PMD_DRV_LOG(DEBUG, "enable intr immediately"); + ngbe_enable_intr(dev); + + return 0; +} + +/** + * Interrupt handler which shall be registered for alarm callback for delayed + * handling specific interrupt to wait for the stable nic state. As the + * NIC interrupt state is not stable for ngbe after link is just down, + * it needs to wait 4 seconds to get the stable status. + * + * @param handle + * Pointer to interrupt handle. + * @param param + * The address of parameter (struct rte_eth_dev *) registered before. + * + * @return + * void + */ +static void +ngbe_dev_interrupt_delayed_handler(void *param) +{ + struct rte_eth_dev *dev = (struct rte_eth_dev *)param; + struct ngbe_interrupt *intr = ngbe_dev_intr(dev); + struct ngbe_hw *hw = ngbe_dev_hw(dev); + uint32_t eicr; + + ngbe_disable_intr(hw); + + eicr = ((u32 *)hw->isb_mem)[NGBE_ISB_MISC]; + + if (intr->flags & NGBE_FLAG_NEED_LINK_UPDATE) { + ngbe_dev_link_update(dev, 0); + intr->flags &= ~NGBE_FLAG_NEED_LINK_UPDATE; + ngbe_dev_link_status_print(dev); + rte_eth_dev_callback_process(dev, RTE_ETH_EVENT_INTR_LSC, + NULL); + } + + if (intr->flags & NGBE_FLAG_MACSEC) { + rte_eth_dev_callback_process(dev, RTE_ETH_EVENT_MACSEC, + NULL); + intr->flags &= ~NGBE_FLAG_MACSEC; + } + + /* restore original mask */ + intr->mask_misc = intr->mask_misc_orig; + intr->mask_misc_orig = 0; + intr->mask = intr->mask_orig; + intr->mask_orig = 0; + + PMD_DRV_LOG(DEBUG, "enable intr in delayed handler S[%08x]", eicr); + ngbe_enable_intr(dev); +} + +/** + * Interrupt handler triggered by NIC for handling + * specific interrupt. + * + * @param handle + * Pointer to interrupt handle. + * @param param + * The address of parameter (struct rte_eth_dev *) registered before. + * + * @return + * void + */ +static void +ngbe_dev_interrupt_handler(void *param) +{ + struct rte_eth_dev *dev = (struct rte_eth_dev *)param; + + ngbe_dev_interrupt_get_status(dev); + ngbe_dev_interrupt_action(dev); +} + +static const struct eth_dev_ops ngbe_eth_dev_ops = { + .dev_configure = ngbe_dev_configure, + .dev_infos_get = ngbe_dev_info_get, + .link_update = ngbe_dev_link_update, +}; + RTE_PMD_REGISTER_PCI(net_ngbe, rte_ngbe_pmd); RTE_PMD_REGISTER_PCI_TABLE(net_ngbe, pci_id_ngbe_map); RTE_PMD_REGISTER_KMOD_DEP(net_ngbe, "* igb_uio | uio_pci_generic | vfio-pci"); diff --git a/drivers/net/ngbe/ngbe_ethdev.h b/drivers/net/ngbe/ngbe_ethdev.h index 87cc1cff6b..b67508a3de 100644 --- a/drivers/net/ngbe/ngbe_ethdev.h +++ b/drivers/net/ngbe/ngbe_ethdev.h @@ -6,11 +6,30 @@ #ifndef _NGBE_ETHDEV_H_ #define _NGBE_ETHDEV_H_ +/* need update link, bit flag */ +#define NGBE_FLAG_NEED_LINK_UPDATE (uint32_t)(1 << 0) +#define NGBE_FLAG_MAILBOX (uint32_t)(1 << 1) +#define NGBE_FLAG_PHY_INTERRUPT (uint32_t)(1 << 2) +#define NGBE_FLAG_MACSEC (uint32_t)(1 << 3) +#define NGBE_FLAG_NEED_LINK_CONFIG (uint32_t)(1 << 4) + +#define NGBE_MISC_VEC_ID RTE_INTR_VEC_ZERO_OFFSET + +/* structure for interrupt relative data */ +struct ngbe_interrupt { + uint32_t flags; + uint32_t mask_misc; + uint32_t mask_misc_orig; /* save mask during delayed handler */ + uint64_t mask; + uint64_t mask_orig; /* save mask during delayed handler */ +}; + /* * Structure to store private data for each driver instance (for each port). */ struct ngbe_adapter { struct ngbe_hw hw; + struct ngbe_interrupt intr; }; static inline struct ngbe_adapter * @@ -30,6 +49,21 @@ ngbe_dev_hw(struct rte_eth_dev *dev) return hw; } +static inline struct ngbe_interrupt * +ngbe_dev_intr(struct rte_eth_dev *dev) +{ + struct ngbe_adapter *ad = ngbe_dev_adapter(dev); + struct ngbe_interrupt *intr = &ad->intr; + + return intr; +} + +int +ngbe_dev_link_update_share(struct rte_eth_dev *dev, + int wait_to_complete); + +#define NGBE_LINK_DOWN_CHECK_TIMEOUT 4000 /* ms */ +#define NGBE_LINK_UP_CHECK_TIMEOUT 1000 /* ms */ #define NGBE_VMDQ_NUM_UC_MAC 4096 /* Maximum nb. of UC MAC addr. */ #endif /* _NGBE_ETHDEV_H_ */ -- 2.21.0.windows.1