From: Jiawen Wu <jiawenwu@trustnetic.com>
To: dev@dpdk.org
Cc: Jiawen Wu <jiawenwu@trustnetic.com>
Subject: [dpdk-dev] [PATCH v6 14/19] net/ngbe: add simple Rx flow
Date: Thu, 17 Jun 2021 19:00:00 +0800 [thread overview]
Message-ID: <20210617110005.4132926-15-jiawenwu@trustnetic.com> (raw)
In-Reply-To: <20210617110005.4132926-1-jiawenwu@trustnetic.com>
Initialize device with the simplest receive function.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
---
drivers/net/ngbe/ngbe_ethdev.c | 1 +
drivers/net/ngbe/ngbe_ethdev.h | 3 +
drivers/net/ngbe/ngbe_rxtx.c | 168 +++++++++++++++++++++++++++++++++
drivers/net/ngbe/ngbe_rxtx.h | 81 ++++++++++++++++
4 files changed, 253 insertions(+)
diff --git a/drivers/net/ngbe/ngbe_ethdev.c b/drivers/net/ngbe/ngbe_ethdev.c
index d6f93cfe46..269186acc0 100644
--- a/drivers/net/ngbe/ngbe_ethdev.c
+++ b/drivers/net/ngbe/ngbe_ethdev.c
@@ -110,6 +110,7 @@ eth_ngbe_dev_init(struct rte_eth_dev *eth_dev, void *init_params __rte_unused)
PMD_INIT_FUNC_TRACE();
eth_dev->dev_ops = &ngbe_eth_dev_ops;
+ eth_dev->rx_pkt_burst = &ngbe_recv_pkts;
if (rte_eal_process_type() != RTE_PROC_PRIMARY)
return 0;
diff --git a/drivers/net/ngbe/ngbe_ethdev.h b/drivers/net/ngbe/ngbe_ethdev.h
index 131671c313..8fb7c8a19b 100644
--- a/drivers/net/ngbe/ngbe_ethdev.h
+++ b/drivers/net/ngbe/ngbe_ethdev.h
@@ -72,6 +72,9 @@ int ngbe_dev_tx_queue_setup(struct rte_eth_dev *dev, uint16_t tx_queue_id,
uint16_t nb_tx_desc, unsigned int socket_id,
const struct rte_eth_txconf *tx_conf);
+uint16_t ngbe_recv_pkts(void *rx_queue, struct rte_mbuf **rx_pkts,
+ uint16_t nb_pkts);
+
int
ngbe_dev_link_update_share(struct rte_eth_dev *dev,
int wait_to_complete);
diff --git a/drivers/net/ngbe/ngbe_rxtx.c b/drivers/net/ngbe/ngbe_rxtx.c
index da9150b2f1..f97fceaf7c 100644
--- a/drivers/net/ngbe/ngbe_rxtx.c
+++ b/drivers/net/ngbe/ngbe_rxtx.c
@@ -15,6 +15,174 @@
#include "ngbe_ethdev.h"
#include "ngbe_rxtx.h"
+/*
+ * Prefetch a cache line into all cache levels.
+ */
+#define rte_ngbe_prefetch(p) rte_prefetch0(p)
+
+/*********************************************************************
+ *
+ * Rx functions
+ *
+ **********************************************************************/
+uint16_t
+ngbe_recv_pkts(void *rx_queue, struct rte_mbuf **rx_pkts,
+ uint16_t nb_pkts)
+{
+ struct ngbe_rx_queue *rxq;
+ volatile struct ngbe_rx_desc *rx_ring;
+ volatile struct ngbe_rx_desc *rxdp;
+ struct ngbe_rx_entry *sw_ring;
+ struct ngbe_rx_entry *rxe;
+ struct rte_mbuf *rxm;
+ struct rte_mbuf *nmb;
+ struct ngbe_rx_desc rxd;
+ uint64_t dma_addr;
+ uint32_t staterr;
+ uint16_t pkt_len;
+ uint16_t rx_id;
+ uint16_t nb_rx;
+ uint16_t nb_hold;
+
+ nb_rx = 0;
+ nb_hold = 0;
+ rxq = rx_queue;
+ rx_id = rxq->rx_tail;
+ rx_ring = rxq->rx_ring;
+ sw_ring = rxq->sw_ring;
+ struct rte_eth_dev *dev = &rte_eth_devices[rxq->port_id];
+ while (nb_rx < nb_pkts) {
+ /*
+ * The order of operations here is important as the DD status
+ * bit must not be read after any other descriptor fields.
+ * rx_ring and rxdp are pointing to volatile data so the order
+ * of accesses cannot be reordered by the compiler. If they were
+ * not volatile, they could be reordered which could lead to
+ * using invalid descriptor fields when read from rxd.
+ */
+ rxdp = &rx_ring[rx_id];
+ staterr = rxdp->qw1.lo.status;
+ if (!(staterr & rte_cpu_to_le_32(NGBE_RXD_STAT_DD)))
+ break;
+ rxd = *rxdp;
+
+ /*
+ * End of packet.
+ *
+ * If the NGBE_RXD_STAT_EOP flag is not set, the Rx packet
+ * is likely to be invalid and to be dropped by the various
+ * validation checks performed by the network stack.
+ *
+ * Allocate a new mbuf to replenish the RX ring descriptor.
+ * If the allocation fails:
+ * - arrange for that Rx descriptor to be the first one
+ * being parsed the next time the receive function is
+ * invoked [on the same queue].
+ *
+ * - Stop parsing the Rx ring and return immediately.
+ *
+ * This policy do not drop the packet received in the Rx
+ * descriptor for which the allocation of a new mbuf failed.
+ * Thus, it allows that packet to be later retrieved if
+ * mbuf have been freed in the mean time.
+ * As a side effect, holding Rx descriptors instead of
+ * systematically giving them back to the NIC may lead to
+ * Rx ring exhaustion situations.
+ * However, the NIC can gracefully prevent such situations
+ * to happen by sending specific "back-pressure" flow control
+ * frames to its peer(s).
+ */
+ PMD_RX_LOG(DEBUG, "port_id=%u queue_id=%u rx_id=%u "
+ "ext_err_stat=0x%08x pkt_len=%u",
+ (uint16_t)rxq->port_id, (uint16_t)rxq->queue_id,
+ (uint16_t)rx_id, (uint32_t)staterr,
+ (uint16_t)rte_le_to_cpu_16(rxd.qw1.hi.len));
+
+ nmb = rte_mbuf_raw_alloc(rxq->mb_pool);
+ if (nmb == NULL) {
+ PMD_RX_LOG(DEBUG, "Rx mbuf alloc failed port_id=%u "
+ "queue_id=%u", (uint16_t)rxq->port_id,
+ (uint16_t)rxq->queue_id);
+ dev->data->rx_mbuf_alloc_failed++;
+ break;
+ }
+
+ nb_hold++;
+ rxe = &sw_ring[rx_id];
+ rx_id++;
+ if (rx_id == rxq->nb_rx_desc)
+ rx_id = 0;
+
+ /* Prefetch next mbuf while processing current one. */
+ rte_ngbe_prefetch(sw_ring[rx_id].mbuf);
+
+ /*
+ * When next Rx descriptor is on a cache-line boundary,
+ * prefetch the next 4 Rx descriptors and the next 8 pointers
+ * to mbufs.
+ */
+ if ((rx_id & 0x3) == 0) {
+ rte_ngbe_prefetch(&rx_ring[rx_id]);
+ rte_ngbe_prefetch(&sw_ring[rx_id]);
+ }
+
+ rxm = rxe->mbuf;
+ rxe->mbuf = nmb;
+ dma_addr = rte_cpu_to_le_64(rte_mbuf_data_iova_default(nmb));
+ NGBE_RXD_HDRADDR(rxdp, 0);
+ NGBE_RXD_PKTADDR(rxdp, dma_addr);
+
+ /*
+ * Initialize the returned mbuf.
+ * setup generic mbuf fields:
+ * - number of segments,
+ * - next segment,
+ * - packet length,
+ * - Rx port identifier.
+ */
+ pkt_len = (uint16_t)(rte_le_to_cpu_16(rxd.qw1.hi.len));
+ rxm->data_off = RTE_PKTMBUF_HEADROOM;
+ rte_packet_prefetch((char *)rxm->buf_addr + rxm->data_off);
+ rxm->nb_segs = 1;
+ rxm->next = NULL;
+ rxm->pkt_len = pkt_len;
+ rxm->data_len = pkt_len;
+ rxm->port = rxq->port_id;
+
+ /*
+ * Store the mbuf address into the next entry of the array
+ * of returned packets.
+ */
+ rx_pkts[nb_rx++] = rxm;
+ }
+ rxq->rx_tail = rx_id;
+
+ /*
+ * If the number of free Rx descriptors is greater than the Rx free
+ * threshold of the queue, advance the Receive Descriptor Tail (RDT)
+ * register.
+ * Update the RDT with the value of the last processed Rx descriptor
+ * minus 1, to guarantee that the RDT register is never equal to the
+ * RDH register, which creates a "full" ring situation from the
+ * hardware point of view...
+ */
+ nb_hold = (uint16_t)(nb_hold + rxq->nb_rx_hold);
+ if (nb_hold > rxq->rx_free_thresh) {
+ PMD_RX_LOG(DEBUG, "port_id=%u queue_id=%u rx_tail=%u "
+ "nb_hold=%u nb_rx=%u",
+ (uint16_t)rxq->port_id, (uint16_t)rxq->queue_id,
+ (uint16_t)rx_id, (uint16_t)nb_hold,
+ (uint16_t)nb_rx);
+ rx_id = (uint16_t)((rx_id == 0) ?
+ (rxq->nb_rx_desc - 1) : (rx_id - 1));
+ ngbe_set32(rxq->rdt_reg_addr, rx_id);
+ nb_hold = 0;
+ }
+ rxq->nb_rx_hold = nb_hold;
+ return nb_rx;
+}
+
+
/*********************************************************************
*
* Queue management functions
diff --git a/drivers/net/ngbe/ngbe_rxtx.h b/drivers/net/ngbe/ngbe_rxtx.h
index 0f2c185dbf..1c8fd76f12 100644
--- a/drivers/net/ngbe/ngbe_rxtx.h
+++ b/drivers/net/ngbe/ngbe_rxtx.h
@@ -43,6 +43,85 @@ struct ngbe_rx_desc {
} qw1; /* also as r.hdr_addr */
};
+/* @ngbe_rx_desc.qw0 */
+#define NGBE_RXD_PKTADDR(rxd, v) \
+ (((volatile __le64 *)(rxd))[0] = cpu_to_le64(v))
+
+/* @ngbe_rx_desc.qw1 */
+#define NGBE_RXD_HDRADDR(rxd, v) \
+ (((volatile __le64 *)(rxd))[1] = cpu_to_le64(v))
+
+/* @ngbe_rx_desc.dw0 */
+#define NGBE_RXD_RSSTYPE(dw) RS(dw, 0, 0xF)
+#define NGBE_RSSTYPE_NONE 0
+#define NGBE_RSSTYPE_IPV4TCP 1
+#define NGBE_RSSTYPE_IPV4 2
+#define NGBE_RSSTYPE_IPV6TCP 3
+#define NGBE_RSSTYPE_IPV4SCTP 4
+#define NGBE_RSSTYPE_IPV6 5
+#define NGBE_RSSTYPE_IPV6SCTP 6
+#define NGBE_RSSTYPE_IPV4UDP 7
+#define NGBE_RSSTYPE_IPV6UDP 8
+#define NGBE_RSSTYPE_FDIR 15
+#define NGBE_RXD_SECTYPE(dw) RS(dw, 4, 0x3)
+#define NGBE_RXD_SECTYPE_NONE LS(0, 4, 0x3)
+#define NGBE_RXD_SECTYPE_IPSECESP LS(2, 4, 0x3)
+#define NGBE_RXD_SECTYPE_IPSECAH LS(3, 4, 0x3)
+#define NGBE_RXD_TPIDSEL(dw) RS(dw, 6, 0x7)
+#define NGBE_RXD_PTID(dw) RS(dw, 9, 0xFF)
+#define NGBE_RXD_RSCCNT(dw) RS(dw, 17, 0xF)
+#define NGBE_RXD_HDRLEN(dw) RS(dw, 21, 0x3FF)
+#define NGBE_RXD_SPH MS(31, 0x1)
+
+/* @ngbe_rx_desc.dw1 */
+/** bit 0-31, as rss hash when **/
+#define NGBE_RXD_RSSHASH(rxd) ((rxd)->qw0.dw1)
+
+/** bit 0-31, as ip csum when **/
+#define NGBE_RXD_IPID(rxd) ((rxd)->qw0.hi.ipid)
+#define NGBE_RXD_CSUM(rxd) ((rxd)->qw0.hi.csum)
+
+/* @ngbe_rx_desc.dw2 */
+#define NGBE_RXD_STATUS(rxd) ((rxd)->qw1.lo.status)
+/** bit 0-1 **/
+#define NGBE_RXD_STAT_DD MS(0, 0x1) /* Descriptor Done */
+#define NGBE_RXD_STAT_EOP MS(1, 0x1) /* End of Packet */
+/** bit 2-31, when EOP=0 **/
+#define NGBE_RXD_NEXTP_RESV(v) LS(v, 2, 0x3)
+#define NGBE_RXD_NEXTP(dw) RS(dw, 4, 0xFFFF) /* Next Descriptor */
+/** bit 2-31, when EOP=1 **/
+#define NGBE_RXD_PKT_CLS_MASK MS(2, 0x7) /* Packet Class */
+#define NGBE_RXD_PKT_CLS_TC_RSS LS(0, 2, 0x7) /* RSS Hash */
+#define NGBE_RXD_PKT_CLS_FLM LS(1, 2, 0x7) /* FDir Match */
+#define NGBE_RXD_PKT_CLS_SYN LS(2, 2, 0x7) /* TCP Sync */
+#define NGBE_RXD_PKT_CLS_5TUPLE LS(3, 2, 0x7) /* 5 Tuple */
+#define NGBE_RXD_PKT_CLS_ETF LS(4, 2, 0x7) /* Ethertype Filter */
+#define NGBE_RXD_STAT_VLAN MS(5, 0x1) /* IEEE VLAN Packet */
+#define NGBE_RXD_STAT_UDPCS MS(6, 0x1) /* UDP xsum calculated */
+#define NGBE_RXD_STAT_L4CS MS(7, 0x1) /* L4 xsum calculated */
+#define NGBE_RXD_STAT_IPCS MS(8, 0x1) /* IP xsum calculated */
+#define NGBE_RXD_STAT_PIF MS(9, 0x1) /* Non-unicast address */
+#define NGBE_RXD_STAT_EIPCS MS(10, 0x1) /* Encap IP xsum calculated */
+#define NGBE_RXD_STAT_VEXT MS(11, 0x1) /* Multi-VLAN */
+#define NGBE_RXD_STAT_IPV6EX MS(12, 0x1) /* IPv6 with option header */
+#define NGBE_RXD_STAT_LLINT MS(13, 0x1) /* Pkt caused LLI */
+#define NGBE_RXD_STAT_1588 MS(14, 0x1) /* IEEE1588 Time Stamp */
+#define NGBE_RXD_STAT_SECP MS(15, 0x1) /* Security Processing */
+#define NGBE_RXD_STAT_LB MS(16, 0x1) /* Loopback Status */
+/*** bit 17-30, when PTYPE=IP ***/
+#define NGBE_RXD_STAT_BMC MS(17, 0x1) /* PTYPE=IP, BMC status */
+#define NGBE_RXD_ERR_HBO MS(23, 0x1) /* Header Buffer Overflow */
+#define NGBE_RXD_ERR_EIPCS MS(26, 0x1) /* Encap IP header error */
+#define NGBE_RXD_ERR_SECERR MS(27, 0x1) /* macsec or ipsec error */
+#define NGBE_RXD_ERR_RXE MS(29, 0x1) /* Any MAC Error */
+#define NGBE_RXD_ERR_L4CS MS(30, 0x1) /* TCP/UDP xsum error */
+#define NGBE_RXD_ERR_IPCS MS(31, 0x1) /* IP xsum error */
+#define NGBE_RXD_ERR_CSUM(dw) RS(dw, 30, 0x3)
+
+/* @ngbe_rx_desc.dw3 */
+#define NGBE_RXD_LENGTH(rxd) ((rxd)->qw1.hi.len)
+#define NGBE_RXD_VLAN(rxd) ((rxd)->qw1.hi.tag)
+
/*****************************************************************************
* Transmit Descriptor
*****************************************************************************/
@@ -73,6 +152,8 @@ struct ngbe_tx_desc {
#define RX_RING_SZ ((NGBE_RING_DESC_MAX + RTE_PMD_NGBE_RX_MAX_BURST) * \
sizeof(struct ngbe_rx_desc))
+#define rte_packet_prefetch(p) rte_prefetch1(p)
+
#define NGBE_TX_MAX_SEG 40
#ifndef DEFAULT_TX_FREE_THRESH
--
2.21.0.windows.1
next prev parent reply other threads:[~2021-06-17 10:59 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-17 10:59 [dpdk-dev] [PATCH v6 00/19] net: ngbe PMD Jiawen Wu
2021-06-17 10:59 ` [dpdk-dev] [PATCH v6 01/19] net/ngbe: add build and doc infrastructure Jiawen Wu
2021-07-02 13:07 ` Andrew Rybchenko
2021-07-05 2:52 ` Jiawen Wu
2021-07-05 8:54 ` Andrew Rybchenko
2021-06-17 10:59 ` [dpdk-dev] [PATCH v6 02/19] net/ngbe: support probe and remove Jiawen Wu
2021-07-02 13:22 ` Andrew Rybchenko
2021-06-17 10:59 ` [dpdk-dev] [PATCH v6 03/19] net/ngbe: add log type and error type Jiawen Wu
2021-07-02 13:22 ` Andrew Rybchenko
2021-06-17 10:59 ` [dpdk-dev] [PATCH v6 04/19] net/ngbe: define registers Jiawen Wu
2021-06-17 10:59 ` [dpdk-dev] [PATCH v6 05/19] net/ngbe: set MAC type and LAN ID with device initialization Jiawen Wu
2021-07-02 16:05 ` Andrew Rybchenko
2021-06-17 10:59 ` [dpdk-dev] [PATCH v6 06/19] net/ngbe: init and validate EEPROM Jiawen Wu
2021-06-17 10:59 ` [dpdk-dev] [PATCH v6 07/19] net/ngbe: add HW initialization Jiawen Wu
2021-07-02 16:08 ` Andrew Rybchenko
2021-06-17 10:59 ` [dpdk-dev] [PATCH v6 08/19] net/ngbe: identify PHY and reset PHY Jiawen Wu
2021-06-17 10:59 ` [dpdk-dev] [PATCH v6 09/19] net/ngbe: store MAC address Jiawen Wu
2021-07-02 16:12 ` Andrew Rybchenko
2021-06-17 10:59 ` [dpdk-dev] [PATCH v6 10/19] net/ngbe: support link update Jiawen Wu
2021-07-02 16:24 ` Andrew Rybchenko
2021-07-05 7:10 ` Jiawen Wu
2021-07-05 8:58 ` Andrew Rybchenko
2021-06-17 10:59 ` [dpdk-dev] [PATCH v6 11/19] net/ngbe: setup the check PHY link Jiawen Wu
2021-06-17 10:59 ` [dpdk-dev] [PATCH v6 12/19] net/ngbe: add Rx queue setup and release Jiawen Wu
2021-07-02 16:35 ` Andrew Rybchenko
2021-07-05 8:36 ` Jiawen Wu
2021-07-05 9:08 ` Andrew Rybchenko
2021-07-06 7:53 ` Jiawen Wu
2021-07-06 8:06 ` Andrew Rybchenko
2021-07-06 8:33 ` Jiawen Wu
2021-06-17 10:59 ` [dpdk-dev] [PATCH v6 13/19] net/ngbe: add Tx " Jiawen Wu
2021-07-02 16:39 ` Andrew Rybchenko
2021-06-17 11:00 ` Jiawen Wu [this message]
2021-07-02 16:42 ` [dpdk-dev] [PATCH v6 14/19] net/ngbe: add simple Rx flow Andrew Rybchenko
2021-06-17 11:00 ` [dpdk-dev] [PATCH v6 15/19] net/ngbe: add simple Tx flow Jiawen Wu
2021-07-02 16:45 ` Andrew Rybchenko
2021-06-17 11:00 ` [dpdk-dev] [PATCH v6 16/19] net/ngbe: add device start and stop operations Jiawen Wu
2021-07-02 16:52 ` Andrew Rybchenko
2021-06-17 11:00 ` [dpdk-dev] [PATCH v6 17/19] net/ngbe: add Tx queue start and stop Jiawen Wu
2021-07-02 16:55 ` Andrew Rybchenko
2021-06-17 11:00 ` [dpdk-dev] [PATCH v6 18/19] net/ngbe: add Rx " Jiawen Wu
2021-06-17 11:00 ` [dpdk-dev] [PATCH v6 19/19] net/ngbe: support to close and reset device Jiawen Wu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210617110005.4132926-15-jiawenwu@trustnetic.com \
--to=jiawenwu@trustnetic.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).