From: Jiawen Wu <jiawenwu@trustnetic.com>
To: dev@dpdk.org
Cc: Jiawen Wu <jiawenwu@trustnetic.com>
Subject: [dpdk-dev] [PATCH v7 09/19] net/ngbe: store MAC address
Date: Tue, 6 Jul 2021 17:55:35 +0800 [thread overview]
Message-ID: <20210706095545.10776-10-jiawenwu@trustnetic.com> (raw)
In-Reply-To: <20210706095545.10776-1-jiawenwu@trustnetic.com>
Store MAC addresses and init receive address filters.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
---
drivers/net/ngbe/base/ngbe_dummy.h | 33 +++
drivers/net/ngbe/base/ngbe_hw.c | 323 +++++++++++++++++++++++++++++
drivers/net/ngbe/base/ngbe_hw.h | 13 ++
drivers/net/ngbe/base/ngbe_type.h | 19 ++
drivers/net/ngbe/ngbe_ethdev.c | 26 +++
drivers/net/ngbe/ngbe_ethdev.h | 2 +
6 files changed, 416 insertions(+)
diff --git a/drivers/net/ngbe/base/ngbe_dummy.h b/drivers/net/ngbe/base/ngbe_dummy.h
index 51ae0acd2c..e5b5bbb5f7 100644
--- a/drivers/net/ngbe/base/ngbe_dummy.h
+++ b/drivers/net/ngbe/base/ngbe_dummy.h
@@ -51,6 +51,10 @@ static inline s32 ngbe_mac_stop_hw_dummy(struct ngbe_hw *TUP0)
{
return NGBE_ERR_OPS_DUMMY;
}
+static inline s32 ngbe_mac_get_mac_addr_dummy(struct ngbe_hw *TUP0, u8 *TUP1)
+{
+ return NGBE_ERR_OPS_DUMMY;
+}
static inline s32 ngbe_mac_acquire_swfw_sync_dummy(struct ngbe_hw *TUP0,
u32 TUP1)
{
@@ -60,6 +64,29 @@ static inline void ngbe_mac_release_swfw_sync_dummy(struct ngbe_hw *TUP0,
u32 TUP1)
{
}
+static inline s32 ngbe_mac_set_rar_dummy(struct ngbe_hw *TUP0, u32 TUP1,
+ u8 *TUP2, u32 TUP3, u32 TUP4)
+{
+ return NGBE_ERR_OPS_DUMMY;
+}
+static inline s32 ngbe_mac_clear_rar_dummy(struct ngbe_hw *TUP0, u32 TUP1)
+{
+ return NGBE_ERR_OPS_DUMMY;
+}
+static inline s32 ngbe_mac_set_vmdq_dummy(struct ngbe_hw *TUP0, u32 TUP1,
+ u32 TUP2)
+{
+ return NGBE_ERR_OPS_DUMMY;
+}
+static inline s32 ngbe_mac_clear_vmdq_dummy(struct ngbe_hw *TUP0, u32 TUP1,
+ u32 TUP2)
+{
+ return NGBE_ERR_OPS_DUMMY;
+}
+static inline s32 ngbe_mac_init_rx_addrs_dummy(struct ngbe_hw *TUP0)
+{
+ return NGBE_ERR_OPS_DUMMY;
+}
static inline s32 ngbe_mac_init_thermal_ssth_dummy(struct ngbe_hw *TUP0)
{
return NGBE_ERR_OPS_DUMMY;
@@ -105,8 +132,14 @@ static inline void ngbe_init_ops_dummy(struct ngbe_hw *hw)
hw->mac.init_hw = ngbe_mac_init_hw_dummy;
hw->mac.reset_hw = ngbe_mac_reset_hw_dummy;
hw->mac.stop_hw = ngbe_mac_stop_hw_dummy;
+ hw->mac.get_mac_addr = ngbe_mac_get_mac_addr_dummy;
hw->mac.acquire_swfw_sync = ngbe_mac_acquire_swfw_sync_dummy;
hw->mac.release_swfw_sync = ngbe_mac_release_swfw_sync_dummy;
+ hw->mac.set_rar = ngbe_mac_set_rar_dummy;
+ hw->mac.clear_rar = ngbe_mac_clear_rar_dummy;
+ hw->mac.set_vmdq = ngbe_mac_set_vmdq_dummy;
+ hw->mac.clear_vmdq = ngbe_mac_clear_vmdq_dummy;
+ hw->mac.init_rx_addrs = ngbe_mac_init_rx_addrs_dummy;
hw->mac.init_thermal_sensor_thresh = ngbe_mac_init_thermal_ssth_dummy;
hw->mac.check_overtemp = ngbe_mac_check_overtemp_dummy;
hw->phy.identify = ngbe_phy_identify_dummy;
diff --git a/drivers/net/ngbe/base/ngbe_hw.c b/drivers/net/ngbe/base/ngbe_hw.c
index 662fb17532..2daddaaf05 100644
--- a/drivers/net/ngbe/base/ngbe_hw.c
+++ b/drivers/net/ngbe/base/ngbe_hw.c
@@ -142,9 +142,49 @@ s32 ngbe_reset_hw_em(struct ngbe_hw *hw)
msec_delay(50);
+ /* Store the permanent mac address */
+ hw->mac.get_mac_addr(hw, hw->mac.perm_addr);
+
+ /*
+ * Store MAC address from RAR0, clear receive address registers, and
+ * clear the multicast table.
+ */
+ hw->mac.num_rar_entries = NGBE_EM_RAR_ENTRIES;
+ hw->mac.init_rx_addrs(hw);
+
return status;
}
+/**
+ * ngbe_get_mac_addr - Generic get MAC address
+ * @hw: pointer to hardware structure
+ * @mac_addr: Adapter MAC address
+ *
+ * Reads the adapter's MAC address from first Receive Address Register (RAR0)
+ * A reset of the adapter must be performed prior to calling this function
+ * in order for the MAC address to have been loaded from the EEPROM into RAR0
+ **/
+s32 ngbe_get_mac_addr(struct ngbe_hw *hw, u8 *mac_addr)
+{
+ u32 rar_high;
+ u32 rar_low;
+ u16 i;
+
+ DEBUGFUNC("ngbe_get_mac_addr");
+
+ wr32(hw, NGBE_ETHADDRIDX, 0);
+ rar_high = rd32(hw, NGBE_ETHADDRH);
+ rar_low = rd32(hw, NGBE_ETHADDRL);
+
+ for (i = 0; i < 2; i++)
+ mac_addr[i] = (u8)(rar_high >> (1 - i) * 8);
+
+ for (i = 0; i < 4; i++)
+ mac_addr[i + 2] = (u8)(rar_low >> (3 - i) * 8);
+
+ return 0;
+}
+
/**
* ngbe_set_lan_id_multi_port - Set LAN id for PCIe multiple port devices
* @hw: pointer to the HW structure
@@ -215,6 +255,196 @@ s32 ngbe_stop_hw(struct ngbe_hw *hw)
return 0;
}
+/**
+ * ngbe_validate_mac_addr - Validate MAC address
+ * @mac_addr: pointer to MAC address.
+ *
+ * Tests a MAC address to ensure it is a valid Individual Address.
+ **/
+s32 ngbe_validate_mac_addr(u8 *mac_addr)
+{
+ s32 status = 0;
+
+ DEBUGFUNC("ngbe_validate_mac_addr");
+
+ /* Make sure it is not a multicast address */
+ if (NGBE_IS_MULTICAST((struct rte_ether_addr *)mac_addr)) {
+ status = NGBE_ERR_INVALID_MAC_ADDR;
+ /* Not a broadcast address */
+ } else if (NGBE_IS_BROADCAST((struct rte_ether_addr *)mac_addr)) {
+ status = NGBE_ERR_INVALID_MAC_ADDR;
+ /* Reject the zero address */
+ } else if (mac_addr[0] == 0 && mac_addr[1] == 0 && mac_addr[2] == 0 &&
+ mac_addr[3] == 0 && mac_addr[4] == 0 && mac_addr[5] == 0) {
+ status = NGBE_ERR_INVALID_MAC_ADDR;
+ }
+ return status;
+}
+
+/**
+ * ngbe_set_rar - Set Rx address register
+ * @hw: pointer to hardware structure
+ * @index: Receive address register to write
+ * @addr: Address to put into receive address register
+ * @vmdq: VMDq "set" or "pool" index
+ * @enable_addr: set flag that address is active
+ *
+ * Puts an ethernet address into a receive address register.
+ **/
+s32 ngbe_set_rar(struct ngbe_hw *hw, u32 index, u8 *addr, u32 vmdq,
+ u32 enable_addr)
+{
+ u32 rar_low, rar_high;
+ u32 rar_entries = hw->mac.num_rar_entries;
+
+ DEBUGFUNC("ngbe_set_rar");
+
+ /* Make sure we are using a valid rar index range */
+ if (index >= rar_entries) {
+ DEBUGOUT("RAR index %d is out of range.\n", index);
+ return NGBE_ERR_INVALID_ARGUMENT;
+ }
+
+ /* setup VMDq pool selection before this RAR gets enabled */
+ hw->mac.set_vmdq(hw, index, vmdq);
+
+ /*
+ * HW expects these in little endian so we reverse the byte
+ * order from network order (big endian) to little endian
+ */
+ rar_low = NGBE_ETHADDRL_AD0(addr[5]) |
+ NGBE_ETHADDRL_AD1(addr[4]) |
+ NGBE_ETHADDRL_AD2(addr[3]) |
+ NGBE_ETHADDRL_AD3(addr[2]);
+ /*
+ * Some parts put the VMDq setting in the extra RAH bits,
+ * so save everything except the lower 16 bits that hold part
+ * of the address and the address valid bit.
+ */
+ rar_high = rd32(hw, NGBE_ETHADDRH);
+ rar_high &= ~NGBE_ETHADDRH_AD_MASK;
+ rar_high |= (NGBE_ETHADDRH_AD4(addr[1]) |
+ NGBE_ETHADDRH_AD5(addr[0]));
+
+ rar_high &= ~NGBE_ETHADDRH_VLD;
+ if (enable_addr != 0)
+ rar_high |= NGBE_ETHADDRH_VLD;
+
+ wr32(hw, NGBE_ETHADDRIDX, index);
+ wr32(hw, NGBE_ETHADDRL, rar_low);
+ wr32(hw, NGBE_ETHADDRH, rar_high);
+
+ return 0;
+}
+
+/**
+ * ngbe_clear_rar - Remove Rx address register
+ * @hw: pointer to hardware structure
+ * @index: Receive address register to write
+ *
+ * Clears an ethernet address from a receive address register.
+ **/
+s32 ngbe_clear_rar(struct ngbe_hw *hw, u32 index)
+{
+ u32 rar_high;
+ u32 rar_entries = hw->mac.num_rar_entries;
+
+ DEBUGFUNC("ngbe_clear_rar");
+
+ /* Make sure we are using a valid rar index range */
+ if (index >= rar_entries) {
+ DEBUGOUT("RAR index %d is out of range.\n", index);
+ return NGBE_ERR_INVALID_ARGUMENT;
+ }
+
+ /*
+ * Some parts put the VMDq setting in the extra RAH bits,
+ * so save everything except the lower 16 bits that hold part
+ * of the address and the address valid bit.
+ */
+ wr32(hw, NGBE_ETHADDRIDX, index);
+ rar_high = rd32(hw, NGBE_ETHADDRH);
+ rar_high &= ~(NGBE_ETHADDRH_AD_MASK | NGBE_ETHADDRH_VLD);
+
+ wr32(hw, NGBE_ETHADDRL, 0);
+ wr32(hw, NGBE_ETHADDRH, rar_high);
+
+ /* clear VMDq pool/queue selection for this RAR */
+ hw->mac.clear_vmdq(hw, index, BIT_MASK32);
+
+ return 0;
+}
+
+/**
+ * ngbe_init_rx_addrs - Initializes receive address filters.
+ * @hw: pointer to hardware structure
+ *
+ * Places the MAC address in receive address register 0 and clears the rest
+ * of the receive address registers. Clears the multicast table. Assumes
+ * the receiver is in reset when the routine is called.
+ **/
+s32 ngbe_init_rx_addrs(struct ngbe_hw *hw)
+{
+ u32 i;
+ u32 psrctl;
+ u32 rar_entries = hw->mac.num_rar_entries;
+
+ DEBUGFUNC("ngbe_init_rx_addrs");
+
+ /*
+ * If the current mac address is valid, assume it is a software override
+ * to the permanent address.
+ * Otherwise, use the permanent address from the eeprom.
+ */
+ if (ngbe_validate_mac_addr(hw->mac.addr) ==
+ NGBE_ERR_INVALID_MAC_ADDR) {
+ /* Get the MAC address from the RAR0 for later reference */
+ hw->mac.get_mac_addr(hw, hw->mac.addr);
+
+ DEBUGOUT(" Keeping Current RAR0 Addr =%.2X %.2X %.2X ",
+ hw->mac.addr[0], hw->mac.addr[1],
+ hw->mac.addr[2]);
+ DEBUGOUT("%.2X %.2X %.2X\n", hw->mac.addr[3],
+ hw->mac.addr[4], hw->mac.addr[5]);
+ } else {
+ /* Setup the receive address. */
+ DEBUGOUT("Overriding MAC Address in RAR[0]\n");
+ DEBUGOUT(" New MAC Addr =%.2X %.2X %.2X ",
+ hw->mac.addr[0], hw->mac.addr[1],
+ hw->mac.addr[2]);
+ DEBUGOUT("%.2X %.2X %.2X\n", hw->mac.addr[3],
+ hw->mac.addr[4], hw->mac.addr[5]);
+
+ hw->mac.set_rar(hw, 0, hw->mac.addr, 0, true);
+ }
+
+ /* clear VMDq pool/queue selection for RAR 0 */
+ hw->mac.clear_vmdq(hw, 0, BIT_MASK32);
+
+ /* Zero out the other receive addresses. */
+ DEBUGOUT("Clearing RAR[1-%d]\n", rar_entries - 1);
+ for (i = 1; i < rar_entries; i++) {
+ wr32(hw, NGBE_ETHADDRIDX, i);
+ wr32(hw, NGBE_ETHADDRL, 0);
+ wr32(hw, NGBE_ETHADDRH, 0);
+ }
+
+ /* Clear the MTA */
+ hw->addr_ctrl.mta_in_use = 0;
+ psrctl = rd32(hw, NGBE_PSRCTL);
+ psrctl &= ~(NGBE_PSRCTL_ADHF12_MASK | NGBE_PSRCTL_MCHFENA);
+ psrctl |= NGBE_PSRCTL_ADHF12(hw->mac.mc_filter_type);
+ wr32(hw, NGBE_PSRCTL, psrctl);
+
+ DEBUGOUT(" Clearing MTA\n");
+ for (i = 0; i < hw->mac.mcft_size; i++)
+ wr32(hw, NGBE_MCADDRTBL(i), 0);
+
+ ngbe_init_uta_tables(hw);
+
+ return 0;
+}
+
/**
* ngbe_acquire_swfw_sync - Acquire SWFW semaphore
* @hw: pointer to hardware structure
@@ -286,6 +516,89 @@ void ngbe_release_swfw_sync(struct ngbe_hw *hw, u32 mask)
ngbe_release_eeprom_semaphore(hw);
}
+/**
+ * ngbe_clear_vmdq - Disassociate a VMDq pool index from a rx address
+ * @hw: pointer to hardware struct
+ * @rar: receive address register index to disassociate
+ * @vmdq: VMDq pool index to remove from the rar
+ **/
+s32 ngbe_clear_vmdq(struct ngbe_hw *hw, u32 rar, u32 vmdq)
+{
+ u32 mpsar;
+ u32 rar_entries = hw->mac.num_rar_entries;
+
+ DEBUGFUNC("ngbe_clear_vmdq");
+
+ /* Make sure we are using a valid rar index range */
+ if (rar >= rar_entries) {
+ DEBUGOUT("RAR index %d is out of range.\n", rar);
+ return NGBE_ERR_INVALID_ARGUMENT;
+ }
+
+ wr32(hw, NGBE_ETHADDRIDX, rar);
+ mpsar = rd32(hw, NGBE_ETHADDRASS);
+
+ if (NGBE_REMOVED(hw->hw_addr))
+ goto done;
+
+ if (!mpsar)
+ goto done;
+
+ mpsar &= ~(1 << vmdq);
+ wr32(hw, NGBE_ETHADDRASS, mpsar);
+
+ /* was that the last pool using this rar? */
+ if (mpsar == 0 && rar != 0)
+ hw->mac.clear_rar(hw, rar);
+done:
+ return 0;
+}
+
+/**
+ * ngbe_set_vmdq - Associate a VMDq pool index with a rx address
+ * @hw: pointer to hardware struct
+ * @rar: receive address register index to associate with a VMDq index
+ * @vmdq: VMDq pool index
+ **/
+s32 ngbe_set_vmdq(struct ngbe_hw *hw, u32 rar, u32 vmdq)
+{
+ u32 mpsar;
+ u32 rar_entries = hw->mac.num_rar_entries;
+
+ DEBUGFUNC("ngbe_set_vmdq");
+
+ /* Make sure we are using a valid rar index range */
+ if (rar >= rar_entries) {
+ DEBUGOUT("RAR index %d is out of range.\n", rar);
+ return NGBE_ERR_INVALID_ARGUMENT;
+ }
+
+ wr32(hw, NGBE_ETHADDRIDX, rar);
+
+ mpsar = rd32(hw, NGBE_ETHADDRASS);
+ mpsar |= 1 << vmdq;
+ wr32(hw, NGBE_ETHADDRASS, mpsar);
+
+ return 0;
+}
+
+/**
+ * ngbe_init_uta_tables - Initialize the Unicast Table Array
+ * @hw: pointer to hardware structure
+ **/
+s32 ngbe_init_uta_tables(struct ngbe_hw *hw)
+{
+ int i;
+
+ DEBUGFUNC("ngbe_init_uta_tables");
+ DEBUGOUT(" Clearing UTA\n");
+
+ for (i = 0; i < 128; i++)
+ wr32(hw, NGBE_UCADDRTBL(i), 0);
+
+ return 0;
+}
+
/**
* ngbe_init_thermal_sensor_thresh - Inits thermal sensor thresholds
* @hw: pointer to hardware structure
@@ -481,10 +794,18 @@ s32 ngbe_init_ops_pf(struct ngbe_hw *hw)
/* MAC */
mac->init_hw = ngbe_init_hw;
mac->reset_hw = ngbe_reset_hw_em;
+ mac->get_mac_addr = ngbe_get_mac_addr;
mac->stop_hw = ngbe_stop_hw;
mac->acquire_swfw_sync = ngbe_acquire_swfw_sync;
mac->release_swfw_sync = ngbe_release_swfw_sync;
+ /* RAR */
+ mac->set_rar = ngbe_set_rar;
+ mac->clear_rar = ngbe_clear_rar;
+ mac->init_rx_addrs = ngbe_init_rx_addrs;
+ mac->set_vmdq = ngbe_set_vmdq;
+ mac->clear_vmdq = ngbe_clear_vmdq;
+
/* Manageability interface */
mac->init_thermal_sensor_thresh = ngbe_init_thermal_sensor_thresh;
mac->check_overtemp = ngbe_mac_check_overtemp;
@@ -493,6 +814,8 @@ s32 ngbe_init_ops_pf(struct ngbe_hw *hw)
rom->init_params = ngbe_init_eeprom_params;
rom->validate_checksum = ngbe_validate_eeprom_checksum_em;
+ mac->mcft_size = NGBE_EM_MC_TBL_SIZE;
+ mac->num_rar_entries = NGBE_EM_RAR_ENTRIES;
mac->max_rx_queues = NGBE_EM_MAX_RX_QUEUES;
mac->max_tx_queues = NGBE_EM_MAX_TX_QUEUES;
diff --git a/drivers/net/ngbe/base/ngbe_hw.h b/drivers/net/ngbe/base/ngbe_hw.h
index 2205156eb9..875bfa1add 100644
--- a/drivers/net/ngbe/base/ngbe_hw.h
+++ b/drivers/net/ngbe/base/ngbe_hw.h
@@ -10,16 +10,29 @@
#define NGBE_EM_MAX_TX_QUEUES 8
#define NGBE_EM_MAX_RX_QUEUES 8
+#define NGBE_EM_RAR_ENTRIES 32
+#define NGBE_EM_MC_TBL_SIZE 32
s32 ngbe_init_hw(struct ngbe_hw *hw);
s32 ngbe_reset_hw_em(struct ngbe_hw *hw);
s32 ngbe_stop_hw(struct ngbe_hw *hw);
+s32 ngbe_get_mac_addr(struct ngbe_hw *hw, u8 *mac_addr);
void ngbe_set_lan_id_multi_port(struct ngbe_hw *hw);
+s32 ngbe_set_rar(struct ngbe_hw *hw, u32 index, u8 *addr, u32 vmdq,
+ u32 enable_addr);
+s32 ngbe_clear_rar(struct ngbe_hw *hw, u32 index);
+s32 ngbe_init_rx_addrs(struct ngbe_hw *hw);
+
+s32 ngbe_validate_mac_addr(u8 *mac_addr);
s32 ngbe_acquire_swfw_sync(struct ngbe_hw *hw, u32 mask);
void ngbe_release_swfw_sync(struct ngbe_hw *hw, u32 mask);
+s32 ngbe_set_vmdq(struct ngbe_hw *hw, u32 rar, u32 vmdq);
+s32 ngbe_clear_vmdq(struct ngbe_hw *hw, u32 rar, u32 vmdq);
+s32 ngbe_init_uta_tables(struct ngbe_hw *hw);
+
s32 ngbe_init_thermal_sensor_thresh(struct ngbe_hw *hw);
s32 ngbe_mac_check_overtemp(struct ngbe_hw *hw);
void ngbe_disable_rx(struct ngbe_hw *hw);
diff --git a/drivers/net/ngbe/base/ngbe_type.h b/drivers/net/ngbe/base/ngbe_type.h
index 0eabc21b2b..dbf0654db3 100644
--- a/drivers/net/ngbe/base/ngbe_type.h
+++ b/drivers/net/ngbe/base/ngbe_type.h
@@ -63,6 +63,10 @@ enum ngbe_media_type {
struct ngbe_hw;
+struct ngbe_addr_filter_info {
+ u32 mta_in_use;
+};
+
/* Bus parameters */
struct ngbe_bus_info {
void (*set_lan_id)(struct ngbe_hw *hw);
@@ -89,14 +93,28 @@ struct ngbe_mac_info {
s32 (*init_hw)(struct ngbe_hw *hw);
s32 (*reset_hw)(struct ngbe_hw *hw);
s32 (*stop_hw)(struct ngbe_hw *hw);
+ s32 (*get_mac_addr)(struct ngbe_hw *hw, u8 *mac_addr);
s32 (*acquire_swfw_sync)(struct ngbe_hw *hw, u32 mask);
void (*release_swfw_sync)(struct ngbe_hw *hw, u32 mask);
+ /* RAR */
+ s32 (*set_rar)(struct ngbe_hw *hw, u32 index, u8 *addr, u32 vmdq,
+ u32 enable_addr);
+ s32 (*clear_rar)(struct ngbe_hw *hw, u32 index);
+ s32 (*set_vmdq)(struct ngbe_hw *hw, u32 rar, u32 vmdq);
+ s32 (*clear_vmdq)(struct ngbe_hw *hw, u32 rar, u32 vmdq);
+ s32 (*init_rx_addrs)(struct ngbe_hw *hw);
+
/* Manageability interface */
s32 (*init_thermal_sensor_thresh)(struct ngbe_hw *hw);
s32 (*check_overtemp)(struct ngbe_hw *hw);
enum ngbe_mac_type type;
+ u8 addr[ETH_ADDR_LEN];
+ u8 perm_addr[ETH_ADDR_LEN];
+ s32 mc_filter_type;
+ u32 mcft_size;
+ u32 num_rar_entries;
u32 max_tx_queues;
u32 max_rx_queues;
struct ngbe_thermal_sensor_data thermal_sensor_data;
@@ -128,6 +146,7 @@ struct ngbe_hw {
void IOMEM *hw_addr;
void *back;
struct ngbe_mac_info mac;
+ struct ngbe_addr_filter_info addr_ctrl;
struct ngbe_phy_info phy;
struct ngbe_rom_info rom;
struct ngbe_bus_info bus;
diff --git a/drivers/net/ngbe/ngbe_ethdev.c b/drivers/net/ngbe/ngbe_ethdev.c
index db929ac99b..77a5584fbd 100644
--- a/drivers/net/ngbe/ngbe_ethdev.c
+++ b/drivers/net/ngbe/ngbe_ethdev.c
@@ -115,6 +115,32 @@ eth_ngbe_dev_init(struct rte_eth_dev *eth_dev, void *init_params __rte_unused)
return -EIO;
}
+ /* Allocate memory for storing MAC addresses */
+ eth_dev->data->mac_addrs = rte_zmalloc("ngbe", RTE_ETHER_ADDR_LEN *
+ hw->mac.num_rar_entries, 0);
+ if (eth_dev->data->mac_addrs == NULL) {
+ PMD_INIT_LOG(ERR,
+ "Failed to allocate %u bytes needed to store MAC addresses",
+ RTE_ETHER_ADDR_LEN * hw->mac.num_rar_entries);
+ return -ENOMEM;
+ }
+
+ /* Copy the permanent MAC address */
+ rte_ether_addr_copy((struct rte_ether_addr *)hw->mac.perm_addr,
+ ð_dev->data->mac_addrs[0]);
+
+ /* Allocate memory for storing hash filter MAC addresses */
+ eth_dev->data->hash_mac_addrs = rte_zmalloc("ngbe",
+ RTE_ETHER_ADDR_LEN * NGBE_VMDQ_NUM_UC_MAC, 0);
+ if (eth_dev->data->hash_mac_addrs == NULL) {
+ PMD_INIT_LOG(ERR,
+ "Failed to allocate %d bytes needed to store MAC addresses",
+ RTE_ETHER_ADDR_LEN * NGBE_VMDQ_NUM_UC_MAC);
+ rte_free(eth_dev->data->mac_addrs);
+ eth_dev->data->mac_addrs = NULL;
+ return -ENOMEM;
+ }
+
return 0;
}
diff --git a/drivers/net/ngbe/ngbe_ethdev.h b/drivers/net/ngbe/ngbe_ethdev.h
index 20ab896f97..c8878b8563 100644
--- a/drivers/net/ngbe/ngbe_ethdev.h
+++ b/drivers/net/ngbe/ngbe_ethdev.h
@@ -30,4 +30,6 @@ ngbe_dev_hw(struct rte_eth_dev *dev)
return hw;
}
+#define NGBE_VMDQ_NUM_UC_MAC 4096 /* Maximum nb. of UC MAC addr. */
+
#endif /* _NGBE_ETHDEV_H_ */
--
2.21.0.windows.1
next prev parent reply other threads:[~2021-07-06 9:57 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-06 9:55 [dpdk-dev] [PATCH v7 00/19] net: ngbe PMD Jiawen Wu
2021-07-06 9:55 ` [dpdk-dev] [PATCH v7 01/19] net/ngbe: add build and doc infrastructure Jiawen Wu
2021-07-06 9:55 ` [dpdk-dev] [PATCH v7 02/19] net/ngbe: support probe and remove Jiawen Wu
2021-07-07 13:48 ` Andrew Rybchenko
2021-07-06 9:55 ` [dpdk-dev] [PATCH v7 03/19] net/ngbe: add log type and error type Jiawen Wu
2021-07-06 9:55 ` [dpdk-dev] [PATCH v7 04/19] net/ngbe: define registers Jiawen Wu
2021-07-06 9:55 ` [dpdk-dev] [PATCH v7 05/19] net/ngbe: set MAC type and LAN ID with device initialization Jiawen Wu
2021-07-06 9:55 ` [dpdk-dev] [PATCH v7 06/19] net/ngbe: init and validate EEPROM Jiawen Wu
2021-07-06 9:55 ` [dpdk-dev] [PATCH v7 07/19] net/ngbe: add HW initialization Jiawen Wu
2021-07-06 9:55 ` [dpdk-dev] [PATCH v7 08/19] net/ngbe: identify PHY and reset PHY Jiawen Wu
2021-07-06 9:55 ` Jiawen Wu [this message]
2021-07-06 9:55 ` [dpdk-dev] [PATCH v7 10/19] net/ngbe: support link update Jiawen Wu
2021-07-07 13:50 ` Andrew Rybchenko
2021-07-06 9:55 ` [dpdk-dev] [PATCH v7 11/19] net/ngbe: setup the check PHY link Jiawen Wu
2021-07-06 9:55 ` [dpdk-dev] [PATCH v7 12/19] net/ngbe: add Rx queue setup and release Jiawen Wu
2021-07-07 13:56 ` Andrew Rybchenko
2021-07-06 9:55 ` [dpdk-dev] [PATCH v7 13/19] net/ngbe: add Tx " Jiawen Wu
2021-07-07 14:00 ` Andrew Rybchenko
2021-07-06 9:55 ` [dpdk-dev] [PATCH v7 14/19] net/ngbe: add device start and stop operations Jiawen Wu
2021-07-07 14:04 ` Andrew Rybchenko
2021-07-08 6:09 ` Jiawen Wu
2021-07-08 7:36 ` Andrew Rybchenko
2021-07-08 7:50 ` Jiawen Wu
2021-07-08 8:07 ` Andrew Rybchenko
2021-07-06 9:55 ` [dpdk-dev] [PATCH v7 15/19] net/ngbe: add Tx queue start and stop Jiawen Wu
2021-07-06 9:55 ` [dpdk-dev] [PATCH v7 16/19] net/ngbe: add Rx " Jiawen Wu
2021-07-06 9:55 ` [dpdk-dev] [PATCH v7 17/19] net/ngbe: add simple Rx flow Jiawen Wu
2021-07-06 9:55 ` [dpdk-dev] [PATCH v7 18/19] net/ngbe: add simple Tx flow Jiawen Wu
2021-07-06 9:55 ` [dpdk-dev] [PATCH v7 19/19] net/ngbe: support to close and reset device Jiawen Wu
2021-07-07 14:12 ` Andrew Rybchenko
2021-07-08 8:56 ` Jiawen Wu
2021-07-07 14:13 ` [dpdk-dev] [PATCH v7 00/19] net: ngbe PMD Andrew Rybchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210706095545.10776-10-jiawenwu@trustnetic.com \
--to=jiawenwu@trustnetic.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).