From: Heinrich Kuhn <heinrich.kuhn@netronome.com>
To: dev@dpdk.org
Cc: Heinrich Kuhn <heinrich.kuhn@netronome.com>,
Simon Horman <simon.horman@corigine.com>
Subject: [dpdk-dev] [PATCH v2 3/7] net/nfp: move CPP bridge to a separate file
Date: Fri, 16 Jul 2021 10:35:42 +0200 [thread overview]
Message-ID: <20210716083545.34444-4-heinrich.kuhn@netronome.com> (raw)
In-Reply-To: <20210716083545.34444-1-heinrich.kuhn@netronome.com>
This commit moves the CPP bridge logic to a separate file. A new
corresponding header file is also created.
Signed-off-by: Heinrich Kuhn <heinrich.kuhn@netronome.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
---
drivers/net/nfp/meson.build | 1 +
drivers/net/nfp/nfp_cpp_bridge.c | 392 +++++++++++++++++++++++++++++++
drivers/net/nfp/nfp_cpp_bridge.h | 36 +++
drivers/net/nfp/nfp_net.c | 367 +----------------------------
4 files changed, 430 insertions(+), 366 deletions(-)
create mode 100644 drivers/net/nfp/nfp_cpp_bridge.c
create mode 100644 drivers/net/nfp/nfp_cpp_bridge.h
diff --git a/drivers/net/nfp/meson.build b/drivers/net/nfp/meson.build
index 1b289e2354..b46ac2d40f 100644
--- a/drivers/net/nfp/meson.build
+++ b/drivers/net/nfp/meson.build
@@ -20,4 +20,5 @@ sources = files(
'nfpcore/nfp_hwinfo.c',
'nfp_net.c',
'nfp_rxtx.c',
+ 'nfp_cpp_bridge.c',
)
diff --git a/drivers/net/nfp/nfp_cpp_bridge.c b/drivers/net/nfp/nfp_cpp_bridge.c
new file mode 100644
index 0000000000..d916793338
--- /dev/null
+++ b/drivers/net/nfp/nfp_cpp_bridge.c
@@ -0,0 +1,392 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright (c) 2014-2021 Netronome Systems, Inc.
+ * All rights reserved.
+ *
+ * Small portions derived from code Copyright(c) 2010-2015 Intel Corporation.
+ */
+
+/*
+ * vim:shiftwidth=8:noexpandtab
+ *
+ * @file dpdk/pmd/nfp_cpp_bridge.c
+ *
+ * Netronome vNIC DPDK Poll-Mode Driver: CPP Bridge
+ */
+
+#include <rte_service_component.h>
+
+#include "nfpcore/nfp_cpp.h"
+#include "nfpcore/nfp_mip.h"
+#include "nfpcore/nfp_nsp.h"
+
+#include "nfp_net_logs.h"
+#include "nfp_cpp_bridge.h"
+
+#include <sys/ioctl.h>
+
+/* Prototypes */
+static int nfp_cpp_bridge_serve_write(int sockfd, struct nfp_cpp *cpp);
+static int nfp_cpp_bridge_serve_read(int sockfd, struct nfp_cpp *cpp);
+static int nfp_cpp_bridge_serve_ioctl(int sockfd, struct nfp_cpp *cpp);
+
+void nfp_register_cpp_service(struct nfp_cpp *cpp)
+{
+ uint32_t *cpp_service_id = NULL;
+ struct rte_service_spec service;
+
+ memset(&service, 0, sizeof(struct rte_service_spec));
+ snprintf(service.name, sizeof(service.name), "nfp_cpp_service");
+ service.callback = nfp_cpp_bridge_service_func;
+ service.callback_userdata = (void *)cpp;
+
+ if (rte_service_component_register(&service,
+ cpp_service_id))
+ RTE_LOG(WARNING, PMD, "NFP CPP bridge service register() failed");
+ else
+ RTE_LOG(DEBUG, PMD, "NFP CPP bridge service registered");
+}
+
+/*
+ * Serving a write request to NFP from host programs. The request
+ * sends the write size and the CPP target. The bridge makes use
+ * of CPP interface handler configured by the PMD setup.
+ */
+static int
+nfp_cpp_bridge_serve_write(int sockfd, struct nfp_cpp *cpp)
+{
+ struct nfp_cpp_area *area;
+ off_t offset, nfp_offset;
+ uint32_t cpp_id, pos, len;
+ uint32_t tmpbuf[16];
+ size_t count, curlen, totlen = 0;
+ int err = 0;
+
+ PMD_CPP_LOG(DEBUG, "%s: offset size %zu, count_size: %zu\n", __func__,
+ sizeof(off_t), sizeof(size_t));
+
+ /* Reading the count param */
+ err = recv(sockfd, &count, sizeof(off_t), 0);
+ if (err != sizeof(off_t))
+ return -EINVAL;
+
+ curlen = count;
+
+ /* Reading the offset param */
+ err = recv(sockfd, &offset, sizeof(off_t), 0);
+ if (err != sizeof(off_t))
+ return -EINVAL;
+
+ /* Obtain target's CPP ID and offset in target */
+ cpp_id = (offset >> 40) << 8;
+ nfp_offset = offset & ((1ull << 40) - 1);
+
+ PMD_CPP_LOG(DEBUG, "%s: count %zu and offset %jd\n", __func__, count,
+ offset);
+ PMD_CPP_LOG(DEBUG, "%s: cpp_id %08x and nfp_offset %jd\n", __func__,
+ cpp_id, nfp_offset);
+
+ /* Adjust length if not aligned */
+ if (((nfp_offset + (off_t)count - 1) & ~(NFP_CPP_MEMIO_BOUNDARY - 1)) !=
+ (nfp_offset & ~(NFP_CPP_MEMIO_BOUNDARY - 1))) {
+ curlen = NFP_CPP_MEMIO_BOUNDARY -
+ (nfp_offset & (NFP_CPP_MEMIO_BOUNDARY - 1));
+ }
+
+ while (count > 0) {
+ /* configure a CPP PCIe2CPP BAR for mapping the CPP target */
+ area = nfp_cpp_area_alloc_with_name(cpp, cpp_id, "nfp.cdev",
+ nfp_offset, curlen);
+ if (!area) {
+ RTE_LOG(ERR, PMD, "%s: area alloc fail\n", __func__);
+ return -EIO;
+ }
+
+ /* mapping the target */
+ err = nfp_cpp_area_acquire(area);
+ if (err < 0) {
+ RTE_LOG(ERR, PMD, "area acquire failed\n");
+ nfp_cpp_area_free(area);
+ return -EIO;
+ }
+
+ for (pos = 0; pos < curlen; pos += len) {
+ len = curlen - pos;
+ if (len > sizeof(tmpbuf))
+ len = sizeof(tmpbuf);
+
+ PMD_CPP_LOG(DEBUG, "%s: Receive %u of %zu\n", __func__,
+ len, count);
+ err = recv(sockfd, tmpbuf, len, MSG_WAITALL);
+ if (err != (int)len) {
+ RTE_LOG(ERR, PMD,
+ "%s: error when receiving, %d of %zu\n",
+ __func__, err, count);
+ nfp_cpp_area_release(area);
+ nfp_cpp_area_free(area);
+ return -EIO;
+ }
+ err = nfp_cpp_area_write(area, pos, tmpbuf, len);
+ if (err < 0) {
+ RTE_LOG(ERR, PMD, "nfp_cpp_area_write error\n");
+ nfp_cpp_area_release(area);
+ nfp_cpp_area_free(area);
+ return -EIO;
+ }
+ }
+
+ nfp_offset += pos;
+ totlen += pos;
+ nfp_cpp_area_release(area);
+ nfp_cpp_area_free(area);
+
+ count -= pos;
+ curlen = (count > NFP_CPP_MEMIO_BOUNDARY) ?
+ NFP_CPP_MEMIO_BOUNDARY : count;
+ }
+
+ return 0;
+}
+
+/*
+ * Serving a read request to NFP from host programs. The request
+ * sends the read size and the CPP target. The bridge makes use
+ * of CPP interface handler configured by the PMD setup. The read
+ * data is sent to the requester using the same socket.
+ */
+static int
+nfp_cpp_bridge_serve_read(int sockfd, struct nfp_cpp *cpp)
+{
+ struct nfp_cpp_area *area;
+ off_t offset, nfp_offset;
+ uint32_t cpp_id, pos, len;
+ uint32_t tmpbuf[16];
+ size_t count, curlen, totlen = 0;
+ int err = 0;
+
+ PMD_CPP_LOG(DEBUG, "%s: offset size %zu, count_size: %zu\n", __func__,
+ sizeof(off_t), sizeof(size_t));
+
+ /* Reading the count param */
+ err = recv(sockfd, &count, sizeof(off_t), 0);
+ if (err != sizeof(off_t))
+ return -EINVAL;
+
+ curlen = count;
+
+ /* Reading the offset param */
+ err = recv(sockfd, &offset, sizeof(off_t), 0);
+ if (err != sizeof(off_t))
+ return -EINVAL;
+
+ /* Obtain target's CPP ID and offset in target */
+ cpp_id = (offset >> 40) << 8;
+ nfp_offset = offset & ((1ull << 40) - 1);
+
+ PMD_CPP_LOG(DEBUG, "%s: count %zu and offset %jd\n", __func__, count,
+ offset);
+ PMD_CPP_LOG(DEBUG, "%s: cpp_id %08x and nfp_offset %jd\n", __func__,
+ cpp_id, nfp_offset);
+
+ /* Adjust length if not aligned */
+ if (((nfp_offset + (off_t)count - 1) & ~(NFP_CPP_MEMIO_BOUNDARY - 1)) !=
+ (nfp_offset & ~(NFP_CPP_MEMIO_BOUNDARY - 1))) {
+ curlen = NFP_CPP_MEMIO_BOUNDARY -
+ (nfp_offset & (NFP_CPP_MEMIO_BOUNDARY - 1));
+ }
+
+ while (count > 0) {
+ area = nfp_cpp_area_alloc_with_name(cpp, cpp_id, "nfp.cdev",
+ nfp_offset, curlen);
+ if (!area) {
+ RTE_LOG(ERR, PMD, "%s: area alloc failed\n", __func__);
+ return -EIO;
+ }
+
+ err = nfp_cpp_area_acquire(area);
+ if (err < 0) {
+ RTE_LOG(ERR, PMD, "area acquire failed\n");
+ nfp_cpp_area_free(area);
+ return -EIO;
+ }
+
+ for (pos = 0; pos < curlen; pos += len) {
+ len = curlen - pos;
+ if (len > sizeof(tmpbuf))
+ len = sizeof(tmpbuf);
+
+ err = nfp_cpp_area_read(area, pos, tmpbuf, len);
+ if (err < 0) {
+ RTE_LOG(ERR, PMD, "nfp_cpp_area_read error\n");
+ nfp_cpp_area_release(area);
+ nfp_cpp_area_free(area);
+ return -EIO;
+ }
+ PMD_CPP_LOG(DEBUG, "%s: sending %u of %zu\n", __func__,
+ len, count);
+
+ err = send(sockfd, tmpbuf, len, 0);
+ if (err != (int)len) {
+ RTE_LOG(ERR, PMD,
+ "%s: error when sending: %d of %zu\n",
+ __func__, err, count);
+ nfp_cpp_area_release(area);
+ nfp_cpp_area_free(area);
+ return -EIO;
+ }
+ }
+
+ nfp_offset += pos;
+ totlen += pos;
+ nfp_cpp_area_release(area);
+ nfp_cpp_area_free(area);
+
+ count -= pos;
+ curlen = (count > NFP_CPP_MEMIO_BOUNDARY) ?
+ NFP_CPP_MEMIO_BOUNDARY : count;
+ }
+ return 0;
+}
+
+/*
+ * Serving a ioctl command from host NFP tools. This usually goes to
+ * a kernel driver char driver but it is not available when the PF is
+ * bound to the PMD. Currently just one ioctl command is served and it
+ * does not require any CPP access at all.
+ */
+static int
+nfp_cpp_bridge_serve_ioctl(int sockfd, struct nfp_cpp *cpp)
+{
+ uint32_t cmd, ident_size, tmp;
+ int err;
+
+ /* Reading now the IOCTL command */
+ err = recv(sockfd, &cmd, 4, 0);
+ if (err != 4) {
+ RTE_LOG(ERR, PMD, "%s: read error from socket\n", __func__);
+ return -EIO;
+ }
+
+ /* Only supporting NFP_IOCTL_CPP_IDENTIFICATION */
+ if (cmd != NFP_IOCTL_CPP_IDENTIFICATION) {
+ RTE_LOG(ERR, PMD, "%s: unknown cmd %d\n", __func__, cmd);
+ return -EINVAL;
+ }
+
+ err = recv(sockfd, &ident_size, 4, 0);
+ if (err != 4) {
+ RTE_LOG(ERR, PMD, "%s: read error from socket\n", __func__);
+ return -EIO;
+ }
+
+ tmp = nfp_cpp_model(cpp);
+
+ PMD_CPP_LOG(DEBUG, "%s: sending NFP model %08x\n", __func__, tmp);
+
+ err = send(sockfd, &tmp, 4, 0);
+ if (err != 4) {
+ RTE_LOG(ERR, PMD, "%s: error writing to socket\n", __func__);
+ return -EIO;
+ }
+
+ tmp = cpp->interface;
+
+ PMD_CPP_LOG(DEBUG, "%s: sending NFP interface %08x\n", __func__, tmp);
+
+ err = send(sockfd, &tmp, 4, 0);
+ if (err != 4) {
+ RTE_LOG(ERR, PMD, "%s: error writing to socket\n", __func__);
+ return -EIO;
+ }
+
+ return 0;
+}
+
+/*
+ * This is the code to be executed by a service core. The CPP bridge interface
+ * is based on a unix socket and requests usually received by a kernel char
+ * driver, read, write and ioctl, are handled by the CPP bridge. NFP host tools
+ * can be executed with a wrapper library and LD_LIBRARY being completely
+ * unaware of the CPP bridge performing the NFP kernel char driver for CPP
+ * accesses.
+ */
+int32_t
+nfp_cpp_bridge_service_func(void *args)
+{
+ struct sockaddr address;
+ struct nfp_cpp *cpp = args;
+ int sockfd, datafd, op, ret;
+
+ unlink("/tmp/nfp_cpp");
+ sockfd = socket(AF_UNIX, SOCK_STREAM, 0);
+ if (sockfd < 0) {
+ RTE_LOG(ERR, PMD, "%s: socket creation error. Service failed\n",
+ __func__);
+ return -EIO;
+ }
+
+ memset(&address, 0, sizeof(struct sockaddr));
+
+ address.sa_family = AF_UNIX;
+ strcpy(address.sa_data, "/tmp/nfp_cpp");
+
+ ret = bind(sockfd, (const struct sockaddr *)&address,
+ sizeof(struct sockaddr));
+ if (ret < 0) {
+ RTE_LOG(ERR, PMD, "%s: bind error (%d). Service failed\n",
+ __func__, errno);
+ close(sockfd);
+ return ret;
+ }
+
+ ret = listen(sockfd, 20);
+ if (ret < 0) {
+ RTE_LOG(ERR, PMD, "%s: listen error(%d). Service failed\n",
+ __func__, errno);
+ close(sockfd);
+ return ret;
+ }
+
+ for (;;) {
+ datafd = accept(sockfd, NULL, NULL);
+ if (datafd < 0) {
+ RTE_LOG(ERR, PMD, "%s: accept call error (%d)\n",
+ __func__, errno);
+ RTE_LOG(ERR, PMD, "%s: service failed\n", __func__);
+ close(sockfd);
+ return -EIO;
+ }
+
+ while (1) {
+ ret = recv(datafd, &op, 4, 0);
+ if (ret <= 0) {
+ PMD_CPP_LOG(DEBUG, "%s: socket close\n",
+ __func__);
+ break;
+ }
+
+ PMD_CPP_LOG(DEBUG, "%s: getting op %u\n", __func__, op);
+
+ if (op == NFP_BRIDGE_OP_READ)
+ nfp_cpp_bridge_serve_read(datafd, cpp);
+
+ if (op == NFP_BRIDGE_OP_WRITE)
+ nfp_cpp_bridge_serve_write(datafd, cpp);
+
+ if (op == NFP_BRIDGE_OP_IOCTL)
+ nfp_cpp_bridge_serve_ioctl(datafd, cpp);
+
+ if (op == 0)
+ break;
+ }
+ close(datafd);
+ }
+ close(sockfd);
+
+ return 0;
+}
+/*
+ * Local variables:
+ * c-file-style: "Linux"
+ * indent-tabs-mode: t
+ * End:
+ */
diff --git a/drivers/net/nfp/nfp_cpp_bridge.h b/drivers/net/nfp/nfp_cpp_bridge.h
new file mode 100644
index 0000000000..aea5fdc784
--- /dev/null
+++ b/drivers/net/nfp/nfp_cpp_bridge.h
@@ -0,0 +1,36 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright (c) 2014-2021 Netronome Systems, Inc.
+ * All rights reserved.
+ *
+ * Small portions derived from code Copyright(c) 2010-2015 Intel Corporation.
+ */
+
+/*
+ * vim:shiftwidth=8:noexpandtab
+ *
+ * @file dpdk/pmd/nfp_cpp_bridge.h
+ *
+ * Netronome vNIC DPDK Poll-Mode Driver: CPP Bridge header file
+ */
+
+#ifndef _NFP_CPP_BRIDGE_H_
+#define _NFP_CPP_BRIDGE_H_
+
+#define NFP_CPP_MEMIO_BOUNDARY (1 << 20)
+#define NFP_BRIDGE_OP_READ 20
+#define NFP_BRIDGE_OP_WRITE 30
+#define NFP_BRIDGE_OP_IOCTL 40
+
+#define NFP_IOCTL 'n'
+#define NFP_IOCTL_CPP_IDENTIFICATION _IOW(NFP_IOCTL, 0x8f, uint32_t)
+
+void nfp_register_cpp_service(struct nfp_cpp *cpp);
+int32_t nfp_cpp_bridge_service_func(void *args);
+
+#endif /* _NFP_CPP_BRIDGE_H_ */
+/*
+ * Local variables:
+ * c-file-style: "Linux"
+ * indent-tabs-mode: t
+ * End:
+ */
diff --git a/drivers/net/nfp/nfp_net.c b/drivers/net/nfp/nfp_net.c
index 5bfc23ba04..d79c70c5b7 100644
--- a/drivers/net/nfp/nfp_net.c
+++ b/drivers/net/nfp/nfp_net.c
@@ -41,6 +41,7 @@
#include "nfp_rxtx.h"
#include "nfp_net_logs.h"
#include "nfp_net_ctrl.h"
+#include "nfp_cpp_bridge.h"
#include <sys/types.h>
#include <sys/socket.h>
@@ -81,8 +82,6 @@ static int nfp_net_rss_hash_write(struct rte_eth_dev *dev,
struct rte_eth_rss_conf *rss_conf);
static int nfp_set_mac_addr(struct rte_eth_dev *dev,
struct rte_ether_addr *mac_addr);
-static int32_t nfp_cpp_bridge_service_func(void *args);
-static void nfp_register_cpp_service(struct nfp_cpp *cpp);
static int nfp_fw_setup(struct rte_pci_device *dev,
struct nfp_cpp *cpp,
struct nfp_eth_table *nfp_eth_table,
@@ -1926,353 +1925,6 @@ nfp_net_init(struct rte_eth_dev *eth_dev)
return err;
}
-#define NFP_CPP_MEMIO_BOUNDARY (1 << 20)
-
-/*
- * Serving a write request to NFP from host programs. The request
- * sends the write size and the CPP target. The bridge makes use
- * of CPP interface handler configured by the PMD setup.
- */
-static int
-nfp_cpp_bridge_serve_write(int sockfd, struct nfp_cpp *cpp)
-{
- struct nfp_cpp_area *area;
- off_t offset, nfp_offset;
- uint32_t cpp_id, pos, len;
- uint32_t tmpbuf[16];
- size_t count, curlen, totlen = 0;
- int err = 0;
-
- PMD_CPP_LOG(DEBUG, "%s: offset size %zu, count_size: %zu\n", __func__,
- sizeof(off_t), sizeof(size_t));
-
- /* Reading the count param */
- err = recv(sockfd, &count, sizeof(off_t), 0);
- if (err != sizeof(off_t))
- return -EINVAL;
-
- curlen = count;
-
- /* Reading the offset param */
- err = recv(sockfd, &offset, sizeof(off_t), 0);
- if (err != sizeof(off_t))
- return -EINVAL;
-
- /* Obtain target's CPP ID and offset in target */
- cpp_id = (offset >> 40) << 8;
- nfp_offset = offset & ((1ull << 40) - 1);
-
- PMD_CPP_LOG(DEBUG, "%s: count %zu and offset %jd\n", __func__, count,
- offset);
- PMD_CPP_LOG(DEBUG, "%s: cpp_id %08x and nfp_offset %jd\n", __func__,
- cpp_id, nfp_offset);
-
- /* Adjust length if not aligned */
- if (((nfp_offset + (off_t)count - 1) & ~(NFP_CPP_MEMIO_BOUNDARY - 1)) !=
- (nfp_offset & ~(NFP_CPP_MEMIO_BOUNDARY - 1))) {
- curlen = NFP_CPP_MEMIO_BOUNDARY -
- (nfp_offset & (NFP_CPP_MEMIO_BOUNDARY - 1));
- }
-
- while (count > 0) {
- /* configure a CPP PCIe2CPP BAR for mapping the CPP target */
- area = nfp_cpp_area_alloc_with_name(cpp, cpp_id, "nfp.cdev",
- nfp_offset, curlen);
- if (!area) {
- RTE_LOG(ERR, PMD, "%s: area alloc fail\n", __func__);
- return -EIO;
- }
-
- /* mapping the target */
- err = nfp_cpp_area_acquire(area);
- if (err < 0) {
- RTE_LOG(ERR, PMD, "area acquire failed\n");
- nfp_cpp_area_free(area);
- return -EIO;
- }
-
- for (pos = 0; pos < curlen; pos += len) {
- len = curlen - pos;
- if (len > sizeof(tmpbuf))
- len = sizeof(tmpbuf);
-
- PMD_CPP_LOG(DEBUG, "%s: Receive %u of %zu\n", __func__,
- len, count);
- err = recv(sockfd, tmpbuf, len, MSG_WAITALL);
- if (err != (int)len) {
- RTE_LOG(ERR, PMD,
- "%s: error when receiving, %d of %zu\n",
- __func__, err, count);
- nfp_cpp_area_release(area);
- nfp_cpp_area_free(area);
- return -EIO;
- }
- err = nfp_cpp_area_write(area, pos, tmpbuf, len);
- if (err < 0) {
- RTE_LOG(ERR, PMD, "nfp_cpp_area_write error\n");
- nfp_cpp_area_release(area);
- nfp_cpp_area_free(area);
- return -EIO;
- }
- }
-
- nfp_offset += pos;
- totlen += pos;
- nfp_cpp_area_release(area);
- nfp_cpp_area_free(area);
-
- count -= pos;
- curlen = (count > NFP_CPP_MEMIO_BOUNDARY) ?
- NFP_CPP_MEMIO_BOUNDARY : count;
- }
-
- return 0;
-}
-
-/*
- * Serving a read request to NFP from host programs. The request
- * sends the read size and the CPP target. The bridge makes use
- * of CPP interface handler configured by the PMD setup. The read
- * data is sent to the requester using the same socket.
- */
-static int
-nfp_cpp_bridge_serve_read(int sockfd, struct nfp_cpp *cpp)
-{
- struct nfp_cpp_area *area;
- off_t offset, nfp_offset;
- uint32_t cpp_id, pos, len;
- uint32_t tmpbuf[16];
- size_t count, curlen, totlen = 0;
- int err = 0;
-
- PMD_CPP_LOG(DEBUG, "%s: offset size %zu, count_size: %zu\n", __func__,
- sizeof(off_t), sizeof(size_t));
-
- /* Reading the count param */
- err = recv(sockfd, &count, sizeof(off_t), 0);
- if (err != sizeof(off_t))
- return -EINVAL;
-
- curlen = count;
-
- /* Reading the offset param */
- err = recv(sockfd, &offset, sizeof(off_t), 0);
- if (err != sizeof(off_t))
- return -EINVAL;
-
- /* Obtain target's CPP ID and offset in target */
- cpp_id = (offset >> 40) << 8;
- nfp_offset = offset & ((1ull << 40) - 1);
-
- PMD_CPP_LOG(DEBUG, "%s: count %zu and offset %jd\n", __func__, count,
- offset);
- PMD_CPP_LOG(DEBUG, "%s: cpp_id %08x and nfp_offset %jd\n", __func__,
- cpp_id, nfp_offset);
-
- /* Adjust length if not aligned */
- if (((nfp_offset + (off_t)count - 1) & ~(NFP_CPP_MEMIO_BOUNDARY - 1)) !=
- (nfp_offset & ~(NFP_CPP_MEMIO_BOUNDARY - 1))) {
- curlen = NFP_CPP_MEMIO_BOUNDARY -
- (nfp_offset & (NFP_CPP_MEMIO_BOUNDARY - 1));
- }
-
- while (count > 0) {
- area = nfp_cpp_area_alloc_with_name(cpp, cpp_id, "nfp.cdev",
- nfp_offset, curlen);
- if (!area) {
- RTE_LOG(ERR, PMD, "%s: area alloc failed\n", __func__);
- return -EIO;
- }
-
- err = nfp_cpp_area_acquire(area);
- if (err < 0) {
- RTE_LOG(ERR, PMD, "area acquire failed\n");
- nfp_cpp_area_free(area);
- return -EIO;
- }
-
- for (pos = 0; pos < curlen; pos += len) {
- len = curlen - pos;
- if (len > sizeof(tmpbuf))
- len = sizeof(tmpbuf);
-
- err = nfp_cpp_area_read(area, pos, tmpbuf, len);
- if (err < 0) {
- RTE_LOG(ERR, PMD, "nfp_cpp_area_read error\n");
- nfp_cpp_area_release(area);
- nfp_cpp_area_free(area);
- return -EIO;
- }
- PMD_CPP_LOG(DEBUG, "%s: sending %u of %zu\n", __func__,
- len, count);
-
- err = send(sockfd, tmpbuf, len, 0);
- if (err != (int)len) {
- RTE_LOG(ERR, PMD,
- "%s: error when sending: %d of %zu\n",
- __func__, err, count);
- nfp_cpp_area_release(area);
- nfp_cpp_area_free(area);
- return -EIO;
- }
- }
-
- nfp_offset += pos;
- totlen += pos;
- nfp_cpp_area_release(area);
- nfp_cpp_area_free(area);
-
- count -= pos;
- curlen = (count > NFP_CPP_MEMIO_BOUNDARY) ?
- NFP_CPP_MEMIO_BOUNDARY : count;
- }
- return 0;
-}
-
-#define NFP_IOCTL 'n'
-#define NFP_IOCTL_CPP_IDENTIFICATION _IOW(NFP_IOCTL, 0x8f, uint32_t)
-/*
- * Serving a ioctl command from host NFP tools. This usually goes to
- * a kernel driver char driver but it is not available when the PF is
- * bound to the PMD. Currently just one ioctl command is served and it
- * does not require any CPP access at all.
- */
-static int
-nfp_cpp_bridge_serve_ioctl(int sockfd, struct nfp_cpp *cpp)
-{
- uint32_t cmd, ident_size, tmp;
- int err;
-
- /* Reading now the IOCTL command */
- err = recv(sockfd, &cmd, 4, 0);
- if (err != 4) {
- RTE_LOG(ERR, PMD, "%s: read error from socket\n", __func__);
- return -EIO;
- }
-
- /* Only supporting NFP_IOCTL_CPP_IDENTIFICATION */
- if (cmd != NFP_IOCTL_CPP_IDENTIFICATION) {
- RTE_LOG(ERR, PMD, "%s: unknown cmd %d\n", __func__, cmd);
- return -EINVAL;
- }
-
- err = recv(sockfd, &ident_size, 4, 0);
- if (err != 4) {
- RTE_LOG(ERR, PMD, "%s: read error from socket\n", __func__);
- return -EIO;
- }
-
- tmp = nfp_cpp_model(cpp);
-
- PMD_CPP_LOG(DEBUG, "%s: sending NFP model %08x\n", __func__, tmp);
-
- err = send(sockfd, &tmp, 4, 0);
- if (err != 4) {
- RTE_LOG(ERR, PMD, "%s: error writing to socket\n", __func__);
- return -EIO;
- }
-
- tmp = cpp->interface;
-
- PMD_CPP_LOG(DEBUG, "%s: sending NFP interface %08x\n", __func__, tmp);
-
- err = send(sockfd, &tmp, 4, 0);
- if (err != 4) {
- RTE_LOG(ERR, PMD, "%s: error writing to socket\n", __func__);
- return -EIO;
- }
-
- return 0;
-}
-
-#define NFP_BRIDGE_OP_READ 20
-#define NFP_BRIDGE_OP_WRITE 30
-#define NFP_BRIDGE_OP_IOCTL 40
-
-/*
- * This is the code to be executed by a service core. The CPP bridge interface
- * is based on a unix socket and requests usually received by a kernel char
- * driver, read, write and ioctl, are handled by the CPP bridge. NFP host tools
- * can be executed with a wrapper library and LD_LIBRARY being completely
- * unaware of the CPP bridge performing the NFP kernel char driver for CPP
- * accesses.
- */
-static int32_t
-nfp_cpp_bridge_service_func(void *args)
-{
- struct sockaddr address;
- struct nfp_cpp *cpp = args;
- int sockfd, datafd, op, ret;
-
- unlink("/tmp/nfp_cpp");
- sockfd = socket(AF_UNIX, SOCK_STREAM, 0);
- if (sockfd < 0) {
- RTE_LOG(ERR, PMD, "%s: socket creation error. Service failed\n",
- __func__);
- return -EIO;
- }
-
- memset(&address, 0, sizeof(struct sockaddr));
-
- address.sa_family = AF_UNIX;
- strcpy(address.sa_data, "/tmp/nfp_cpp");
-
- ret = bind(sockfd, (const struct sockaddr *)&address,
- sizeof(struct sockaddr));
- if (ret < 0) {
- RTE_LOG(ERR, PMD, "%s: bind error (%d). Service failed\n",
- __func__, errno);
- close(sockfd);
- return ret;
- }
-
- ret = listen(sockfd, 20);
- if (ret < 0) {
- RTE_LOG(ERR, PMD, "%s: listen error(%d). Service failed\n",
- __func__, errno);
- close(sockfd);
- return ret;
- }
-
- for (;;) {
- datafd = accept(sockfd, NULL, NULL);
- if (datafd < 0) {
- RTE_LOG(ERR, PMD, "%s: accept call error (%d)\n",
- __func__, errno);
- RTE_LOG(ERR, PMD, "%s: service failed\n", __func__);
- close(sockfd);
- return -EIO;
- }
-
- while (1) {
- ret = recv(datafd, &op, 4, 0);
- if (ret <= 0) {
- PMD_CPP_LOG(DEBUG, "%s: socket close\n",
- __func__);
- break;
- }
-
- PMD_CPP_LOG(DEBUG, "%s: getting op %u\n", __func__, op);
-
- if (op == NFP_BRIDGE_OP_READ)
- nfp_cpp_bridge_serve_read(datafd, cpp);
-
- if (op == NFP_BRIDGE_OP_WRITE)
- nfp_cpp_bridge_serve_write(datafd, cpp);
-
- if (op == NFP_BRIDGE_OP_IOCTL)
- nfp_cpp_bridge_serve_ioctl(datafd, cpp);
-
- if (op == 0)
- break;
- }
- close(datafd);
- }
- close(sockfd);
-
- return 0;
-}
-
#define DEFAULT_FW_PATH "/lib/firmware/netronome"
static int
@@ -2491,23 +2143,6 @@ static int nfp_init_phyports(struct nfp_pf_dev *pf_dev)
return ret;
}
-static void nfp_register_cpp_service(struct nfp_cpp *cpp)
-{
- uint32_t *cpp_service_id = NULL;
- struct rte_service_spec service;
-
- memset(&service, 0, sizeof(struct rte_service_spec));
- snprintf(service.name, sizeof(service.name), "nfp_cpp_service");
- service.callback = nfp_cpp_bridge_service_func;
- service.callback_userdata = (void *)cpp;
-
- if (rte_service_component_register(&service,
- cpp_service_id))
- RTE_LOG(WARNING, PMD, "NFP CPP bridge service register() failed");
- else
- RTE_LOG(DEBUG, PMD, "NFP CPP bridge service registered");
-}
-
static int nfp_pf_init(struct rte_pci_device *pci_dev)
{
struct nfp_pf_dev *pf_dev = NULL;
--
2.30.1 (Apple Git-130)
next prev parent reply other threads:[~2021-07-16 8:37 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-16 8:23 [dpdk-dev] [PATCH 0/7] Refactor the NFP PMD Heinrich Kuhn
2021-07-16 8:23 ` [dpdk-dev] [PATCH 1/7] net/nfp: split rxtx headers into separate file Heinrich Kuhn
2021-07-16 8:23 ` [dpdk-dev] [PATCH 2/7] net/nfp: move rxtx functions to their own file Heinrich Kuhn
2021-07-16 8:23 ` [dpdk-dev] [PATCH 3/7] net/nfp: move CPP bridge to a separate file Heinrich Kuhn
2021-07-16 8:23 ` [dpdk-dev] [PATCH 4/7] net/nfp: prototype common functions in header file Heinrich Kuhn
2021-07-16 8:23 ` [dpdk-dev] [PATCH 5/7] net/nfp: move VF functions into new file Heinrich Kuhn
2021-07-16 8:23 ` [dpdk-dev] [PATCH 6/7] net/nfp: move PF " Heinrich Kuhn
2021-07-16 8:23 ` [dpdk-dev] [PATCH 7/7] net/nfp: batch file rename for consistency Heinrich Kuhn
2021-07-16 8:35 ` [dpdk-dev] [PATCH v2 0/7] Refactor the NFP PMD Heinrich Kuhn
2021-07-16 8:35 ` [dpdk-dev] [PATCH v2 1/7] net/nfp: split rxtx headers into separate file Heinrich Kuhn
2021-07-16 8:35 ` [dpdk-dev] [PATCH v2 2/7] net/nfp: move rxtx functions to their own file Heinrich Kuhn
2021-07-16 8:35 ` Heinrich Kuhn [this message]
2021-07-16 8:35 ` [dpdk-dev] [PATCH v2 4/7] net/nfp: prototype common functions in header file Heinrich Kuhn
2021-07-16 8:35 ` [dpdk-dev] [PATCH v2 5/7] net/nfp: move VF functions into new file Heinrich Kuhn
2021-07-16 8:35 ` [dpdk-dev] [PATCH v2 6/7] net/nfp: move PF " Heinrich Kuhn
2021-07-16 8:35 ` [dpdk-dev] [PATCH v2 7/7] net/nfp: batch file rename for consistency Heinrich Kuhn
2021-07-23 9:18 ` [dpdk-dev] [PATCH v2 0/7] Refactor the NFP PMD Thomas Monjalon
2021-07-29 13:48 ` Heinrich Kuhn
2021-07-29 13:47 ` [dpdk-dev] [PATCH v3 " Heinrich Kuhn
2021-07-29 13:47 ` [dpdk-dev] [PATCH v3 1/7] net/nfp: split rxtx headers into separate file Heinrich Kuhn
2021-07-29 13:47 ` [dpdk-dev] [PATCH v3 2/7] net/nfp: move rxtx functions to their own file Heinrich Kuhn
2021-07-29 13:47 ` [dpdk-dev] [PATCH v3 3/7] net/nfp: move CPP bridge to a separate file Heinrich Kuhn
2021-07-29 13:47 ` [dpdk-dev] [PATCH v3 4/7] net/nfp: prototype common functions in header file Heinrich Kuhn
2021-08-17 14:44 ` Ferruh Yigit
2021-08-17 16:29 ` Ferruh Yigit
2021-07-29 13:47 ` [dpdk-dev] [PATCH v3 5/7] net/nfp: move VF functions into new file Heinrich Kuhn
2021-07-29 13:47 ` [dpdk-dev] [PATCH v3 6/7] net/nfp: move PF " Heinrich Kuhn
2021-07-29 13:47 ` [dpdk-dev] [PATCH v3 7/7] net/nfp: batch file rename for consistency Heinrich Kuhn
2021-08-13 12:46 ` [dpdk-dev] [PATCH v3 0/7] Refactor the NFP PMD Heinrich Kuhn
2021-08-13 14:47 ` Ferruh Yigit
2021-08-17 16:29 ` Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210716083545.34444-4-heinrich.kuhn@netronome.com \
--to=heinrich.kuhn@netronome.com \
--cc=dev@dpdk.org \
--cc=simon.horman@corigine.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).