DPDK patches and discussions
 help / color / mirror / Atom feed
From: Hemant Agrawal <hemant.agrawal@nxp.com>
To: dev@dpdk.org
Cc: gakhil@marvell.com, Gagandeep Singh <g.singh@nxp.com>
Subject: [dpdk-dev] [PATCH 3/5] crypto/dpaa_sec: support non-HMAC auth algos
Date: Wed, 21 Jul 2021 13:09:18 +0530	[thread overview]
Message-ID: <20210721073920.21893-3-hemant.agrawal@nxp.com> (raw)
In-Reply-To: <20210721073920.21893-1-hemant.agrawal@nxp.com>

From: Gagandeep Singh <g.singh@nxp.com>

This patch add support for non-HMAC, md5, shax algos.

Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
---
 doc/guides/cryptodevs/features/dpaa_sec.ini |   8 +-
 drivers/crypto/dpaa_sec/dpaa_sec.c          |  55 +++++++--
 drivers/crypto/dpaa_sec/dpaa_sec.h          | 126 ++++++++++++++++++++
 3 files changed, 180 insertions(+), 9 deletions(-)

diff --git a/doc/guides/cryptodevs/features/dpaa_sec.ini b/doc/guides/cryptodevs/features/dpaa_sec.ini
index 5d0d04d601..eab14da96c 100644
--- a/doc/guides/cryptodevs/features/dpaa_sec.ini
+++ b/doc/guides/cryptodevs/features/dpaa_sec.ini
@@ -33,11 +33,17 @@ ZUC EEA3      = Y
 ; Supported authentication algorithms of the 'dpaa_sec' crypto driver.
 ;
 [Auth]
+MD5          = Y
 MD5 HMAC     = Y
+SHA1         = Y
 SHA1 HMAC    = Y
+SHA224       = Y
 SHA224 HMAC  = Y
+SHA256       = Y
 SHA256 HMAC  = Y
+SHA384       = Y
 SHA384 HMAC  = Y
+SHA512       = Y
 SHA512 HMAC  = Y
 SNOW3G UIA2  = Y
 ZUC EIA3     = Y
@@ -53,4 +59,4 @@ AES GCM (256) = Y
 ;
 ; Supported Asymmetric algorithms of the 'dpaa_sec' crypto driver.
 ;
-[Asymmetric]
\ No newline at end of file
+[Asymmetric]
diff --git a/drivers/crypto/dpaa_sec/dpaa_sec.c b/drivers/crypto/dpaa_sec/dpaa_sec.c
index af5c7c499c..95b9d7414f 100644
--- a/drivers/crypto/dpaa_sec/dpaa_sec.c
+++ b/drivers/crypto/dpaa_sec/dpaa_sec.c
@@ -489,6 +489,18 @@ dpaa_sec_prep_cdb(dpaa_sec_session *ses)
 		alginfo_a.algtype = ses->auth_key.alg;
 		alginfo_a.algmode = ses->auth_key.algmode;
 		switch (ses->auth_alg) {
+		case RTE_CRYPTO_AUTH_MD5:
+		case RTE_CRYPTO_AUTH_SHA1:
+		case RTE_CRYPTO_AUTH_SHA224:
+		case RTE_CRYPTO_AUTH_SHA256:
+		case RTE_CRYPTO_AUTH_SHA384:
+		case RTE_CRYPTO_AUTH_SHA512:
+			shared_desc_len = cnstr_shdsc_hash(
+						cdb->sh_desc, true,
+						swap, SHR_NEVER, &alginfo_a,
+						!ses->dir,
+						ses->digest_length);
+			break;
 		case RTE_CRYPTO_AUTH_MD5_HMAC:
 		case RTE_CRYPTO_AUTH_SHA1_HMAC:
 		case RTE_CRYPTO_AUTH_SHA224_HMAC:
@@ -2080,43 +2092,70 @@ dpaa_sec_auth_init(struct rte_cryptodev *dev __rte_unused,
 {
 	session->ctxt = DPAA_SEC_AUTH;
 	session->auth_alg = xform->auth.algo;
-	session->auth_key.data = rte_zmalloc(NULL, xform->auth.key.length,
+	session->auth_key.length = xform->auth.key.length;
+	if (xform->auth.key.length) {
+		session->auth_key.data =
+				rte_zmalloc(NULL, xform->auth.key.length,
 					     RTE_CACHE_LINE_SIZE);
-	if (session->auth_key.data == NULL && xform->auth.key.length > 0) {
-		DPAA_SEC_ERR("No Memory for auth key");
-		return -ENOMEM;
+		if (session->auth_key.data == NULL) {
+			DPAA_SEC_ERR("No Memory for auth key");
+			return -ENOMEM;
+		}
+		memcpy(session->auth_key.data, xform->auth.key.data,
+				xform->auth.key.length);
+
 	}
-	session->auth_key.length = xform->auth.key.length;
 	session->digest_length = xform->auth.digest_length;
 	if (session->cipher_alg == RTE_CRYPTO_CIPHER_NULL) {
 		session->iv.offset = xform->auth.iv.offset;
 		session->iv.length = xform->auth.iv.length;
 	}
 
-	memcpy(session->auth_key.data, xform->auth.key.data,
-	       xform->auth.key.length);
-
 	switch (xform->auth.algo) {
+	case RTE_CRYPTO_AUTH_SHA1:
+		session->auth_key.alg = OP_ALG_ALGSEL_SHA1;
+		session->auth_key.algmode = OP_ALG_AAI_HASH;
+		break;
 	case RTE_CRYPTO_AUTH_SHA1_HMAC:
 		session->auth_key.alg = OP_ALG_ALGSEL_SHA1;
 		session->auth_key.algmode = OP_ALG_AAI_HMAC;
 		break;
+	case RTE_CRYPTO_AUTH_MD5:
+		session->auth_key.alg = OP_ALG_ALGSEL_MD5;
+		session->auth_key.algmode = OP_ALG_AAI_HASH;
+		break;
 	case RTE_CRYPTO_AUTH_MD5_HMAC:
 		session->auth_key.alg = OP_ALG_ALGSEL_MD5;
 		session->auth_key.algmode = OP_ALG_AAI_HMAC;
 		break;
+	case RTE_CRYPTO_AUTH_SHA224:
+		session->auth_key.alg = OP_ALG_ALGSEL_SHA224;
+		session->auth_key.algmode = OP_ALG_AAI_HASH;
+		break;
 	case RTE_CRYPTO_AUTH_SHA224_HMAC:
 		session->auth_key.alg = OP_ALG_ALGSEL_SHA224;
 		session->auth_key.algmode = OP_ALG_AAI_HMAC;
 		break;
+	case RTE_CRYPTO_AUTH_SHA256:
+		session->auth_key.alg = OP_ALG_ALGSEL_SHA256;
+		session->auth_key.algmode = OP_ALG_AAI_HASH;
+		break;
 	case RTE_CRYPTO_AUTH_SHA256_HMAC:
 		session->auth_key.alg = OP_ALG_ALGSEL_SHA256;
 		session->auth_key.algmode = OP_ALG_AAI_HMAC;
 		break;
+	case RTE_CRYPTO_AUTH_SHA384:
+		session->auth_key.alg = OP_ALG_ALGSEL_SHA384;
+		session->auth_key.algmode = OP_ALG_AAI_HASH;
+		break;
 	case RTE_CRYPTO_AUTH_SHA384_HMAC:
 		session->auth_key.alg = OP_ALG_ALGSEL_SHA384;
 		session->auth_key.algmode = OP_ALG_AAI_HMAC;
 		break;
+	case RTE_CRYPTO_AUTH_SHA512:
+		session->auth_key.alg = OP_ALG_ALGSEL_SHA512;
+		session->auth_key.algmode = OP_ALG_AAI_HASH;
+		break;
 	case RTE_CRYPTO_AUTH_SHA512_HMAC:
 		session->auth_key.alg = OP_ALG_ALGSEL_SHA512;
 		session->auth_key.algmode = OP_ALG_AAI_HMAC;
diff --git a/drivers/crypto/dpaa_sec/dpaa_sec.h b/drivers/crypto/dpaa_sec/dpaa_sec.h
index 216e8c8b6f..d500a4c246 100644
--- a/drivers/crypto/dpaa_sec/dpaa_sec.h
+++ b/drivers/crypto/dpaa_sec/dpaa_sec.h
@@ -240,6 +240,27 @@ static const struct rte_cryptodev_capabilities dpaa_sec_capabilities[] = {
 			}, },
 		}, },
 	},
+	{       /* MD5 */
+		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+		{.sym = {
+			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+			{.auth = {
+				.algo = RTE_CRYPTO_AUTH_MD5,
+				.block_size = 64,
+				.key_size = {
+					.min = 0,
+					.max = 0,
+					.increment = 0
+				},
+				.digest_size = {
+					.min = 16,
+					.max = 16,
+					.increment = 0
+				},
+				.iv_size = { 0 }
+			}, }
+		}, }
+	},
 	{	/* MD5 HMAC */
 		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
 		{.sym = {
@@ -261,6 +282,27 @@ static const struct rte_cryptodev_capabilities dpaa_sec_capabilities[] = {
 			}, }
 		}, }
 	},
+	{	/* SHA1 */
+		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+		{.sym = {
+			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+			{.auth = {
+				.algo = RTE_CRYPTO_AUTH_SHA1,
+				.block_size = 64,
+				.key_size = {
+					.min = 0,
+					.max = 0,
+					.increment = 0
+				},
+				.digest_size = {
+					.min = 20,
+					.max = 20,
+					.increment = 0
+				},
+				.iv_size = { 0 }
+			}, }
+		}, }
+	},
 	{	/* SHA1 HMAC */
 		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
 		{.sym = {
@@ -282,6 +324,27 @@ static const struct rte_cryptodev_capabilities dpaa_sec_capabilities[] = {
 			}, }
 		}, }
 	},
+	{	/* SHA224 */
+		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+		{.sym = {
+			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+			{.auth = {
+				.algo = RTE_CRYPTO_AUTH_SHA224,
+				.block_size = 64,
+					.key_size = {
+					.min = 0,
+					.max = 0,
+					.increment = 0
+				},
+				.digest_size = {
+					.min = 28,
+					.max = 28,
+					.increment = 0
+				},
+				.iv_size = { 0 }
+			}, }
+		}, }
+	},
 	{	/* SHA224 HMAC */
 		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
 		{.sym = {
@@ -303,6 +366,27 @@ static const struct rte_cryptodev_capabilities dpaa_sec_capabilities[] = {
 			}, }
 		}, }
 	},
+	{	/* SHA256 */
+		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+		{.sym = {
+			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+			{.auth = {
+				.algo = RTE_CRYPTO_AUTH_SHA256,
+				.block_size = 64,
+				.key_size = {
+					.min = 0,
+					.max = 0,
+					.increment = 0
+				},
+				.digest_size = {
+					.min = 32,
+					.max = 32,
+					.increment = 0
+				},
+				.iv_size = { 0 }
+			}, }
+		}, }
+	},
 	{	/* SHA256 HMAC */
 		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
 		{.sym = {
@@ -324,6 +408,27 @@ static const struct rte_cryptodev_capabilities dpaa_sec_capabilities[] = {
 			}, }
 		}, }
 	},
+	{	/* SHA384 */
+		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+		{.sym = {
+			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+			{.auth = {
+				.algo = RTE_CRYPTO_AUTH_SHA384,
+				.block_size = 64,
+				.key_size = {
+					.min = 0,
+					.max = 0,
+					.increment = 0
+				},
+				.digest_size = {
+					.min = 48,
+					.max = 48,
+					.increment = 0
+					},
+				.iv_size = { 0 }
+			}, }
+		}, }
+	},
 	{	/* SHA384 HMAC */
 		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
 		{.sym = {
@@ -345,6 +450,27 @@ static const struct rte_cryptodev_capabilities dpaa_sec_capabilities[] = {
 			}, }
 		}, }
 	},
+	{	/* SHA512 */
+		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+		{.sym = {
+			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+			{.auth = {
+				.algo = RTE_CRYPTO_AUTH_SHA512,
+				.block_size = 128,
+				.key_size = {
+					.min = 0,
+					.max = 0,
+					.increment = 0
+				},
+				.digest_size = {
+					.min = 64,
+					.max = 64,
+					.increment = 0
+				},
+				.iv_size = { 0 }
+			}, }
+		}, }
+	},
 	{	/* SHA512 HMAC */
 		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
 		{.sym = {
-- 
2.17.1


  parent reply	other threads:[~2021-07-21  7:42 UTC|newest]

Thread overview: 41+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-21  7:39 [dpdk-dev] [PATCH 1/5] crypto/dpaa2_sec: fix to check next null for auth only case Hemant Agrawal
2021-07-21  7:39 ` [dpdk-dev] [PATCH 2/5] crypto/dpaa_sec: support DES-CBC Hemant Agrawal
2021-07-21  7:39 ` Hemant Agrawal [this message]
2021-07-21  7:39 ` [dpdk-dev] [PATCH 4/5] crypto/dpaa_sec: support AES-XCBC-MAC Hemant Agrawal
2021-07-21  7:39 ` [dpdk-dev] [PATCH 5/5] crypto/dpaa_sec: add support for AES CMAC integrity check Hemant Agrawal
2021-08-25  8:18 ` [dpdk-dev] [PATCH v2 01/11] crypto/dpaa2_sec: fix to check next null for auth only case Hemant Agrawal
2021-08-25  8:18   ` [dpdk-dev] [PATCH v2 02/11] crypto/dpaa_sec: support DES-CBC Hemant Agrawal
2021-08-25  8:18   ` [dpdk-dev] [PATCH v2 03/11] crypto/dpaa_sec: support non-HMAC auth algos Hemant Agrawal
2021-08-25  8:18   ` [dpdk-dev] [PATCH v2 04/11] crypto/dpaa_sec: support AES-XCBC-MAC Hemant Agrawal
2021-08-25  8:18   ` [dpdk-dev] [PATCH v2 05/11] crypto/dpaa_sec: add support for AES CMAC integrity check Hemant Agrawal
2021-09-02 13:46     ` [dpdk-dev] [EXT] " Akhil Goyal
2021-08-25  8:18   ` [dpdk-dev] [PATCH v2 06/11] common/dpaax: caamflib load correct HFN from DESCBUF Hemant Agrawal
2021-08-25  8:18   ` [dpdk-dev] [PATCH v2 07/11] common/dpaax: caamflib do not clear DPOVRD Hemant Agrawal
2021-08-25  8:18   ` [dpdk-dev] [PATCH v2 08/11] common/dpaax: enhance caamflib with inline keys Hemant Agrawal
2021-08-25  8:18   ` [dpdk-dev] [PATCH v2 09/11] common/dpaax: fix IV value for shortMAC-I for SNOW algo Hemant Agrawal
2021-08-25  8:18   ` [dpdk-dev] [PATCH v2 10/11] crypto/dpaa_sec: force inline of the keys to save space Hemant Agrawal
2021-08-25  8:18   ` [dpdk-dev] [PATCH v2 11/11] crypto/dpaa2_sec: add error packet counters Hemant Agrawal
2021-09-02 12:46   ` [dpdk-dev] [EXT] [PATCH v2 01/11] crypto/dpaa2_sec: fix to check next null for auth only case Akhil Goyal
2021-09-02 13:48     ` Hemant Agrawal
2021-09-07  8:39   ` [dpdk-dev] [PATCH v3 01/10] crypto/dpaa_sec: support DES-CBC Hemant Agrawal
2021-09-07  8:39     ` [dpdk-dev] [PATCH v3 02/10] crypto/dpaa_sec: support non-HMAC auth algos Hemant Agrawal
2021-09-07  8:39     ` [dpdk-dev] [PATCH v3 03/10] crypto/dpaa_sec: support AES-XCBC-MAC Hemant Agrawal
2021-09-07  8:39     ` [dpdk-dev] [PATCH v3 04/10] crypto/dpaa_sec: add support for AES CMAC integrity check Hemant Agrawal
2021-09-07  8:39     ` [dpdk-dev] [PATCH v3 05/10] common/dpaax: caamflib load correct HFN from DESCBUF Hemant Agrawal
2021-09-07  8:39     ` [dpdk-dev] [PATCH v3 06/10] common/dpaax: caamflib do not clear DPOVRD Hemant Agrawal
2021-09-07  8:39     ` [dpdk-dev] [PATCH v3 07/10] common/dpaax: enhance caamflib with inline keys Hemant Agrawal
2021-09-07  8:39     ` [dpdk-dev] [PATCH v3 08/10] common/dpaax: fix IV value for shortMAC-I for SNOW algo Hemant Agrawal
2021-09-07  8:39     ` [dpdk-dev] [PATCH v3 09/10] crypto/dpaa_sec: force inline of the keys to save space Hemant Agrawal
2021-09-07  8:39     ` [dpdk-dev] [PATCH v3 10/10] crypto/dpaa2_sec: add error packet counters Hemant Agrawal
2021-09-07 11:47     ` [dpdk-dev] [EXT] [PATCH v3 01/10] crypto/dpaa_sec: support DES-CBC Akhil Goyal
2021-09-08  6:59     ` [dpdk-dev] [PATCH v4 " Hemant Agrawal
2021-09-08  6:59       ` [dpdk-dev] [PATCH v4 02/10] crypto/dpaa_sec: support non-HMAC auth algos Hemant Agrawal
2021-09-08  6:59       ` [dpdk-dev] [PATCH v4 03/10] crypto/dpaa_sec: support AES-XCBC-MAC Hemant Agrawal
2021-09-08  6:59       ` [dpdk-dev] [PATCH v4 04/10] crypto/dpaa_sec: add support for AES CMAC integrity check Hemant Agrawal
2021-09-08  6:59       ` [dpdk-dev] [PATCH v4 05/10] common/dpaax: caamflib load correct HFN from DESCBUF Hemant Agrawal
2021-09-08  6:59       ` [dpdk-dev] [PATCH v4 06/10] common/dpaax: caamflib do not clear DPOVRD Hemant Agrawal
2021-09-08  6:59       ` [dpdk-dev] [PATCH v4 07/10] common/dpaax: enhance caamflib with inline keys Hemant Agrawal
2021-09-08  6:59       ` [dpdk-dev] [PATCH v4 08/10] common/dpaax: fix IV value for shortMAC-I for SNOW algo Hemant Agrawal
2021-09-08  6:59       ` [dpdk-dev] [PATCH v4 09/10] crypto/dpaa_sec: force inline of the keys to save space Hemant Agrawal
2021-09-08  6:59       ` [dpdk-dev] [PATCH v4 10/10] crypto/dpaa2_sec: add error packet counters Hemant Agrawal
2021-09-08 10:13       ` [dpdk-dev] [EXT] [PATCH v4 01/10] crypto/dpaa_sec: support DES-CBC Akhil Goyal

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210721073920.21893-3-hemant.agrawal@nxp.com \
    --to=hemant.agrawal@nxp.com \
    --cc=dev@dpdk.org \
    --cc=g.singh@nxp.com \
    --cc=gakhil@marvell.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).