[dpdk-dev] [PATCH] doc: two typos in documentation

[dpdk-dev] [PATCH] doc: two typos in documentation

[Henry Nadeau]

Corrected two typos that got added in the most recent merge.


Signed-off-by: Henry Nadeau <hnadeau@iol.unh.edu>
---
 doc/guides/sample_app_ug/ioat.rst            | 2 +-
 doc/guides/sample_app_ug/vmdq_forwarding.rst | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/doc/guides/sample_app_ug/ioat.rst b/doc/guides/sample_app_ug/ioat.rst
index ee0a627b06..b364be3b5d 100644
--- a/doc/guides/sample_app_ug/ioat.rst
+++ b/doc/guides/sample_app_ug/ioat.rst
@@ -236,7 +236,7 @@ function in order to start processing for each lcore:
 .. literalinclude:: ../../../examples/ioat/ioatfwd.c
     :language: c
     :start-after: Start processing for each lcore. 8<
-    :end-before: >8 End of starting to processfor each lcore.
+    :end-before: >8 End of starting to process for each lcore.
     :dedent: 0
 
 The function launches Rx/Tx processing functions on configured lcores
diff --git a/doc/guides/sample_app_ug/vmdq_forwarding.rst b/doc/guides/sample_app_ug/vmdq_forwarding.rst
index ae1b5660df..ed28525a15 100644
--- a/doc/guides/sample_app_ug/vmdq_forwarding.rst
+++ b/doc/guides/sample_app_ug/vmdq_forwarding.rst
@@ -103,7 +103,7 @@ the MAC of VMDq pool 2 on port 1 is 52:54:00:12:01:02.
 
 .. literalinclude:: ../../../examples/vmdq/main.c
     :language: c
-    :start-after: Building correct configruration for vdmq. 8<
+    :start-after: Building correct configuration for vdmq. 8<
     :end-before: >8 End of get_eth_conf.
 
 Once the network port has been initialized using the correct VMDq values,
-- 
2.25.1

Re: [dpdk-dev] [PATCH] doc: two typos in documentation

[Thomas Monjalon]

04/08/2021 20:26, Henry Nadeau:
> -    :start-after: Building correct configruration for vdmq. 8<
> +    :start-after: Building correct configuration for vdmq. 8<

While at it, "vmdq" should be "VMDq" I think (to be checked).

Re: [dpdk-dev] [PATCH] doc: two typos in documentation

[Walsh, Conor]

Hi Henry,

When correcting these tags the corresponding tags within the code must also be updated to match
or it will break the literalinclude link and cause the warnings shown below.

doc/guides/sample_app_ug/dma.rst:240: WARNING: end-before pattern not found: >8 End of starting to process for each lcore.
doc/guides/sample_app_ug/vmdq_forwarding.rst:104: WARNING: start-after pattern not found: Building correct configuration for vdmq. 8<

Thanks,
Conor.

> From: dev <dev-bounces@dpdk.org> On Behalf Of Henry Nadeau
> Sent: Wednesday 4 August 2021 19:27
> To: dev@dpdk.org
> Cc: thomas@monjalon.net
> Subject: [dpdk-dev] [PATCH] doc: two typos in documentation
> 
> Corrected two typos that got added in the most recent merge.
> 
> 
> Signed-off-by: Henry Nadeau <hnadeau@iol.unh.edu>
> ---
>  doc/guides/sample_app_ug/ioat.rst            | 2 +-
>  doc/guides/sample_app_ug/vmdq_forwarding.rst | 2 +-
>  2 files changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/doc/guides/sample_app_ug/ioat.rst
> b/doc/guides/sample_app_ug/ioat.rst
> index ee0a627b06..b364be3b5d 100644
> --- a/doc/guides/sample_app_ug/ioat.rst
> +++ b/doc/guides/sample_app_ug/ioat.rst
> @@ -236,7 +236,7 @@ function in order to start processing for each lcore:
>  .. literalinclude:: ../../../examples/ioat/ioatfwd.c
>      :language: c
>      :start-after: Start processing for each lcore. 8<
> -    :end-before: >8 End of starting to processfor each lcore.
> +    :end-before: >8 End of starting to process for each lcore.

This one is within ../../../examples/ioat/ioatfwd.c now ../../../examples/dma/dmafwd.c

>      :dedent: 0
> 
>  The function launches Rx/Tx processing functions on configured lcores
> diff --git a/doc/guides/sample_app_ug/vmdq_forwarding.rst
> b/doc/guides/sample_app_ug/vmdq_forwarding.rst
> index ae1b5660df..ed28525a15 100644
> --- a/doc/guides/sample_app_ug/vmdq_forwarding.rst
> +++ b/doc/guides/sample_app_ug/vmdq_forwarding.rst
> @@ -103,7 +103,7 @@ the MAC of VMDq pool 2 on port 1 is
> 52:54:00:12:01:02.
> 
>  .. literalinclude:: ../../../examples/vmdq/main.c
>      :language: c
> -    :start-after: Building correct configruration for vdmq. 8<
> +    :start-after: Building correct configuration for vdmq. 8<

And this one is within ../../../examples/vmdq/main.c

>      :end-before: >8 End of get_eth_conf.
> 
>  Once the network port has been initialized using the correct VMDq values,
> --
> 2.25.1