[dpdk-dev] [PATCH 06/28] net/ice/base: add clock initialization function

[Qi Zhang <qi.z.zhang@intel.com>]

Before the device PTP hardware clock can be initialized, some steps must
be taken by the driver. This includes writing some registers and
initializing the PHY.

Some of these steps are distinct depending on the device type (E810 or
E822). Additionally, a future change will introduce more steps for E822
devices to program the Clock Generation Unit.

Introduce ice_ptp_init_phc as well as device-specific sub-functions for
e810 and e822 devices.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
---
 drivers/net/ice/base/ice_cgu_regs.h   | 117 +++++++++
 drivers/net/ice/base/ice_ptp_consts.h |  74 ++++++
 drivers/net/ice/base/ice_ptp_hw.c     | 348 +++++++++++++++++++++++++-
 drivers/net/ice/base/ice_ptp_hw.h     |  24 ++
 4 files changed, 562 insertions(+), 1 deletion(-)
 create mode 100644 drivers/net/ice/base/ice_cgu_regs.h

diff --git a/drivers/net/ice/base/ice_cgu_regs.h b/drivers/net/ice/base/ice_cgu_regs.h
new file mode 100644
index 0000000000..6751481e83
--- /dev/null
+++ b/drivers/net/ice/base/ice_cgu_regs.h
@@ -0,0 +1,117 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2001-2021 Intel Corporation
+ */
+
+#ifndef _ICE_CGU_REGS_H_
+#define _ICE_CGU_REGS_H_
+
+#define NAC_CGU_DWORD9 0x24
+union nac_cgu_dword9 {
+	struct {
+		u32 time_ref_freq_sel : 3;
+		u32 clk_eref1_en : 1;
+		u32 clk_eref0_en : 1;
+		u32 time_ref_en : 1;
+		u32 time_sync_en : 1;
+		u32 one_pps_out_en : 1;
+		u32 clk_ref_synce_en : 1;
+		u32 clk_synce1_en : 1;
+		u32 clk_synce0_en : 1;
+		u32 net_clk_ref1_en : 1;
+		u32 net_clk_ref0_en : 1;
+		u32 clk_synce1_amp : 2;
+		u32 misc6 : 1;
+		u32 clk_synce0_amp : 2;
+		u32 one_pps_out_amp : 2;
+		u32 misc24 : 12;
+	} field;
+	u32 val;
+};
+
+#define NAC_CGU_DWORD19 0x4c
+union nac_cgu_dword19 {
+	struct {
+		u32 tspll_fbdiv_intgr : 8;
+		u32 fdpll_ulck_thr : 5;
+		u32 misc15 : 3;
+		u32 tspll_ndivratio : 4;
+		u32 tspll_iref_ndivratio : 3;
+		u32 misc19 : 1;
+		u32 japll_ndivratio : 4;
+		u32 japll_iref_ndivratio : 3;
+		u32 misc27 : 1;
+	} field;
+	u32 val;
+};
+
+#define NAC_CGU_DWORD22 0x58
+union nac_cgu_dword22 {
+	struct {
+		u32 fdpll_frac_div_out_nc : 2;
+		u32 fdpll_lock_int_for : 1;
+		u32 synce_hdov_int_for : 1;
+		u32 synce_lock_int_for : 1;
+		u32 fdpll_phlead_slip_nc : 1;
+		u32 fdpll_acc1_ovfl_nc : 1;
+		u32 fdpll_acc2_ovfl_nc : 1;
+		u32 synce_status_nc : 6;
+		u32 fdpll_acc1f_ovfl : 1;
+		u32 misc18 : 1;
+		u32 fdpllclk_div : 4;
+		u32 time1588clk_div : 4;
+		u32 synceclk_div : 4;
+		u32 synceclk_sel_div2 : 1;
+		u32 fdpllclk_sel_div2 : 1;
+		u32 time1588clk_sel_div2 : 1;
+		u32 misc3 : 1;
+	} field;
+	u32 val;
+};
+
+#define NAC_CGU_DWORD24 0x60
+union nac_cgu_dword24 {
+	struct {
+		u32 tspll_fbdiv_frac : 22;
+		u32 misc20 : 2;
+		u32 ts_pll_enable : 1;
+		u32 time_sync_tspll_align_sel : 1;
+		u32 ext_synce_sel : 1;
+		u32 ref1588_ck_div : 4;
+		u32 time_ref_sel : 1;
+	} field;
+	u32 val;
+};
+
+#define TSPLL_CNTR_BIST_SETTINGS 0x344
+union tspll_cntr_bist_settings {
+	struct {
+		u32 i_irefgen_settling_time_cntr_7_0 : 8;
+		u32 i_irefgen_settling_time_ro_standby_1_0 : 2;
+		u32 reserved195 : 5;
+		u32 i_plllock_sel_0 : 1;
+		u32 i_plllock_sel_1 : 1;
+		u32 i_plllock_cnt_6_0 : 7;
+		u32 i_plllock_cnt_10_7 : 4;
+		u32 reserved200 : 4;
+	} field;
+	u32 val;
+};
+
+#define TSPLL_RO_BWM_LF 0x370
+union tspll_ro_bwm_lf {
+	struct {
+		u32 bw_freqov_high_cri_7_0 : 8;
+		u32 bw_freqov_high_cri_9_8 : 2;
+		u32 biascaldone_cri : 1;
+		u32 plllock_gain_tran_cri : 1;
+		u32 plllock_true_lock_cri : 1;
+		u32 pllunlock_flag_cri : 1;
+		u32 afcerr_cri : 1;
+		u32 afcdone_cri : 1;
+		u32 feedfwrdgain_cal_cri_7_0 : 8;
+		u32 m2fbdivmod_cri_7_0 : 8;
+	} field;
+	u32 val;
+};
+
+#endif /* _ICE_CGU_REGS_H_ */
diff --git a/drivers/net/ice/base/ice_ptp_consts.h b/drivers/net/ice/base/ice_ptp_consts.h
index 2bd338c88c..4583dd42ff 100644
--- a/drivers/net/ice/base/ice_ptp_consts.h
+++ b/drivers/net/ice/base/ice_ptp_consts.h
@@ -83,4 +83,78 @@ const struct ice_time_ref_info_e822 e822_time_ref[NUM_ICE_TIME_REF_FREQ] = {
 	},
 };
 
+const struct ice_cgu_pll_params_e822 e822_cgu_params[NUM_ICE_TIME_REF_FREQ] = {
+	/* ICE_TIME_REF_FREQ_25_000 -> 25 MHz */
+	{
+		/* refclk_pre_div */
+		1,
+		/* feedback_div */
+		197,
+		/* frac_n_div */
+		2621440,
+		/* post_pll_div */
+		6,
+	},
+
+	/* ICE_TIME_REF_FREQ_122_880 -> 122.88 MHz */
+	{
+		/* refclk_pre_div */
+		5,
+		/* feedback_div */
+		223,
+		/* frac_n_div */
+		524288,
+		/* post_pll_div */
+		7,
+	},
+
+	/* ICE_TIME_REF_FREQ_125_000 -> 125 MHz */
+	{
+		/* refclk_pre_div */
+		5,
+		/* feedback_div */
+		223,
+		/* frac_n_div */
+		524288,
+		/* post_pll_div */
+		7,
+	},
+
+	/* ICE_TIME_REF_FREQ_153_600 -> 153.6 MHz */
+	{
+		/* refclk_pre_div */
+		5,
+		/* feedback_div */
+		159,
+		/* frac_n_div */
+		1572864,
+		/* post_pll_div */
+		6,
+	},
+
+	/* ICE_TIME_REF_FREQ_156_250 -> 156.25 MHz */
+	{
+		/* refclk_pre_div */
+		5,
+		/* feedback_div */
+		159,
+		/* frac_n_div */
+		1572864,
+		/* post_pll_div */
+		6,
+	},
+
+	/* ICE_TIME_REF_FREQ_245_760 -> 245.76 MHz */
+	{
+		/* refclk_pre_div */
+		10,
+		/* feedback_div */
+		223,
+		/* frac_n_div */
+		524288,
+		/* post_pll_div */
+		7,
+	},
+};
+
 #endif /* _ICE_PTP_CONSTS_H_ */
diff --git a/drivers/net/ice/base/ice_ptp_hw.c b/drivers/net/ice/base/ice_ptp_hw.c
index 8aefcf93fd..cb32a4fb48 100644
--- a/drivers/net/ice/base/ice_ptp_hw.c
+++ b/drivers/net/ice/base/ice_ptp_hw.c
@@ -6,7 +6,7 @@
 #include "ice_common.h"
 #include "ice_ptp_hw.h"
 #include "ice_ptp_consts.h"
-
+#include "ice_cgu_regs.h"
 
 /* Low level functions for interacting with and managing the device clock used
  * for the Precision Time Protocol.
@@ -699,6 +699,315 @@ ice_clear_phy_tstamp_e822(struct ice_hw *hw, u8 quad, u8 idx)
 	return ICE_SUCCESS;
 }
 
+/**
+ * ice_read_cgu_reg_e822 - Read a CGU register
+ * @hw: pointer to the HW struct
+ * @addr: Register address to read
+ * @val: storage for register value read
+ *
+ * Read the contents of a register of the Clock Generation Unit. Only
+ * applicable to E822 devices.
+ */
+static enum ice_status
+ice_read_cgu_reg_e822(struct ice_hw *hw, u32 addr, u32 *val)
+{
+	struct ice_sbq_msg_input cgu_msg;
+	enum ice_status status;
+
+	cgu_msg.opcode = ice_sbq_msg_rd;
+	cgu_msg.dest_dev = cgu;
+	cgu_msg.msg_addr_low = addr;
+	cgu_msg.msg_addr_high = 0x0;
+
+	status = ice_sbq_rw_reg_lp(hw, &cgu_msg, true);
+	if (status) {
+		ice_debug(hw, ICE_DBG_PTP, "Failed to read CGU register 0x%04x, status %d\n",
+			  addr, status);
+		return status;
+	}
+
+	*val = cgu_msg.data;
+
+	return status;
+}
+
+/**
+ * ice_write_cgu_reg_e822 - Write a CGU register
+ * @hw: pointer to the HW struct
+ * @addr: Register address to write
+ * @val: value to write into the register
+ *
+ * Write the specified value to a register of the Clock Generation Unit. Only
+ * applicable to E822 devices.
+ */
+static enum ice_status
+ice_write_cgu_reg_e822(struct ice_hw *hw, u32 addr, u32 val)
+{
+	struct ice_sbq_msg_input cgu_msg;
+	enum ice_status status;
+
+	cgu_msg.opcode = ice_sbq_msg_wr;
+	cgu_msg.dest_dev = cgu;
+	cgu_msg.msg_addr_low = addr;
+	cgu_msg.msg_addr_high = 0x0;
+	cgu_msg.data = val;
+
+	status = ice_sbq_rw_reg_lp(hw, &cgu_msg, true);
+	if (status) {
+		ice_debug(hw, ICE_DBG_PTP, "Failed to write CGU register 0x%04x, status %d\n",
+			  addr, status);
+		return status;
+	}
+
+	return status;
+}
+
+/**
+ * ice_clk_freq_str - Convert time_ref_freq to string
+ * @clk_freq: Clock frequency
+ *
+ * Convert the specified TIME_REF clock frequency to a string.
+ */
+static const char *ice_clk_freq_str(u8 clk_freq)
+{
+	switch ((enum ice_time_ref_freq)clk_freq) {
+	case ICE_TIME_REF_FREQ_25_000:
+		return "25 MHz";
+	case ICE_TIME_REF_FREQ_122_880:
+		return "122.88 MHz";
+	case ICE_TIME_REF_FREQ_125_000:
+		return "125 MHz";
+	case ICE_TIME_REF_FREQ_153_600:
+		return "153.6 MHz";
+	case ICE_TIME_REF_FREQ_156_250:
+		return "156.25 MHz";
+	case ICE_TIME_REF_FREQ_245_760:
+		return "245.76 MHz";
+	default:
+		return "Unknown";
+	}
+}
+
+/**
+ * ice_clk_src_str - Convert time_ref_src to string
+ * @clk_src: Clock source
+ *
+ * Convert the specified clock source to its string name.
+ */
+static const char *ice_clk_src_str(u8 clk_src)
+{
+	switch ((enum ice_clk_src)clk_src) {
+	case ICE_CLK_SRC_TCX0:
+		return "TCX0";
+	case ICE_CLK_SRC_TIME_REF:
+		return "TIME_REF";
+	default:
+		return "Unknown";
+	}
+}
+
+/**
+ * ice_cfg_cgu_pll_e822 - Configure the Clock Generation Unit
+ * @hw: pointer to the HW struct
+ * @clk_freq: Clock frequency to program
+ * @clk_src: Clock source to select (TIME_REF, or TCX0)
+ *
+ * Configure the Clock Generation Unit with the desired clock frequency and
+ * time reference, enabling the PLL which drives the PTP hardware clock.
+ */
+enum ice_status
+ice_cfg_cgu_pll_e822(struct ice_hw *hw, enum ice_time_ref_freq clk_freq,
+		     enum ice_clk_src clk_src)
+{
+	union tspll_ro_bwm_lf bwm_lf;
+	union nac_cgu_dword19 dw19;
+	union nac_cgu_dword22 dw22;
+	union nac_cgu_dword24 dw24;
+	union nac_cgu_dword9 dw9;
+	enum ice_status status;
+
+	if (clk_freq >= NUM_ICE_TIME_REF_FREQ) {
+		ice_warn(hw, "Invalid TIME_REF frequency %u\n", clk_freq);
+		return ICE_ERR_PARAM;
+	}
+
+	if (clk_src >= NUM_ICE_CLK_SRC) {
+		ice_warn(hw, "Invalid clock source %u\n", clk_src);
+		return ICE_ERR_PARAM;
+	}
+
+	if (clk_src == ICE_CLK_SRC_TCX0 &&
+	    clk_freq != ICE_TIME_REF_FREQ_25_000) {
+		ice_warn(hw, "TCX0 only supports 25 MHz frequency\n");
+		return ICE_ERR_PARAM;
+	}
+
+	status = ice_read_cgu_reg_e822(hw, NAC_CGU_DWORD9, &dw9.val);
+	if (status)
+		return status;
+
+	status = ice_read_cgu_reg_e822(hw, NAC_CGU_DWORD24, &dw24.val);
+	if (status)
+		return status;
+
+	status = ice_read_cgu_reg_e822(hw, TSPLL_RO_BWM_LF, &bwm_lf.val);
+	if (status)
+		return status;
+
+	/* Log the current clock configuration */
+	ice_debug(hw, ICE_DBG_PTP, "Current CGU configuration -- %s, clk_src %s, clk_freq %s, PLL %s\n",
+		  dw24.field.ts_pll_enable ? "enabled" : "disabled",
+		  ice_clk_src_str(dw24.field.time_ref_sel),
+		  ice_clk_freq_str(dw9.field.time_ref_freq_sel),
+		  bwm_lf.field.plllock_true_lock_cri ? "locked" : "unlocked");
+
+	/* Disable the PLL before changing the clock source or frequency */
+	if (dw24.field.ts_pll_enable) {
+		dw24.field.ts_pll_enable = 0;
+
+		status = ice_write_cgu_reg_e822(hw, NAC_CGU_DWORD24, dw24.val);
+		if (status)
+			return status;
+	}
+
+	/* Set the frequency */
+	dw9.field.time_ref_freq_sel = clk_freq;
+	status = ice_write_cgu_reg_e822(hw, NAC_CGU_DWORD9, dw9.val);
+	if (status)
+		return status;
+
+	/* Configure the TS PLL feedback divisor */
+	status = ice_read_cgu_reg_e822(hw, NAC_CGU_DWORD19, &dw19.val);
+	if (status)
+		return status;
+
+	dw19.field.tspll_fbdiv_intgr = e822_cgu_params[clk_freq].feedback_div;
+	dw19.field.tspll_ndivratio = 1;
+
+	status = ice_write_cgu_reg_e822(hw, NAC_CGU_DWORD19, dw19.val);
+	if (status)
+		return status;
+
+	/* Configure the TS PLL post divisor */
+	status = ice_read_cgu_reg_e822(hw, NAC_CGU_DWORD22, &dw22.val);
+	if (status)
+		return status;
+
+	dw22.field.time1588clk_div = e822_cgu_params[clk_freq].post_pll_div;
+	dw22.field.time1588clk_sel_div2 = 0;
+
+	status = ice_write_cgu_reg_e822(hw, NAC_CGU_DWORD22, dw22.val);
+	if (status)
+		return status;
+
+	/* Configure the TS PLL pre divisor and clock source */
+	status = ice_read_cgu_reg_e822(hw, NAC_CGU_DWORD24, &dw24.val);
+	if (status)
+		return status;
+
+	dw24.field.ref1588_ck_div = e822_cgu_params[clk_freq].refclk_pre_div;
+	dw24.field.tspll_fbdiv_frac = e822_cgu_params[clk_freq].frac_n_div;
+	dw24.field.time_ref_sel = clk_src;
+
+	status = ice_write_cgu_reg_e822(hw, NAC_CGU_DWORD24, dw24.val);
+	if (status)
+		return status;
+
+	/* Finally, enable the PLL */
+	dw24.field.ts_pll_enable = 1;
+
+	status = ice_write_cgu_reg_e822(hw, NAC_CGU_DWORD24, dw24.val);
+	if (status)
+		return status;
+
+	/* Wait to verify if the PLL locks */
+	ice_msec_delay(1, true);
+
+	status = ice_read_cgu_reg_e822(hw, TSPLL_RO_BWM_LF, &bwm_lf.val);
+	if (status)
+		return status;
+
+	if (!bwm_lf.field.plllock_true_lock_cri) {
+		ice_warn(hw, "CGU PLL failed to lock\n");
+		return ICE_ERR_NOT_READY;
+	}
+
+	/* Log the current clock configuration */
+	ice_debug(hw, ICE_DBG_PTP, "New CGU configuration -- %s, clk_src %s, clk_freq %s, PLL %s\n",
+		  dw24.field.ts_pll_enable ? "enabled" : "disabled",
+		  ice_clk_src_str(dw24.field.time_ref_sel),
+		  ice_clk_freq_str(dw9.field.time_ref_freq_sel),
+		  bwm_lf.field.plllock_true_lock_cri ? "locked" : "unlocked");
+
+
+	return ICE_SUCCESS;
+}
+
+/**
+ * ice_init_cgu_e822 - Initialize CGU with settings from firmware
+ * @hw: pointer to the HW structure
+ *
+ * Initialize the Clock Generation Unit of the E822 device.
+ */
+static enum ice_status ice_init_cgu_e822(struct ice_hw *hw)
+{
+	struct ice_ts_func_info *ts_info = &hw->func_caps.ts_func_info;
+	union tspll_cntr_bist_settings cntr_bist;
+	enum ice_status status;
+
+	status = ice_read_cgu_reg_e822(hw, TSPLL_CNTR_BIST_SETTINGS,
+				       &cntr_bist.val);
+	if (status)
+		return status;
+
+	/* Disable sticky lock detection so lock status reported is accurate */
+	cntr_bist.field.i_plllock_sel_0 = 0;
+	cntr_bist.field.i_plllock_sel_1 = 0;
+
+	status = ice_write_cgu_reg_e822(hw, TSPLL_CNTR_BIST_SETTINGS,
+					cntr_bist.val);
+	if (status)
+		return status;
+
+	/* Configure the CGU PLL using the parameters from the function
+	 * capabilities.
+	 */
+	status = ice_cfg_cgu_pll_e822(hw, ts_info->time_ref,
+				      (enum ice_clk_src)ts_info->clk_src);
+	if (status)
+		return status;
+
+	return ICE_SUCCESS;
+}
+
+/**
+ * ice_ptp_init_phc_e822 - Perform E822 specific PHC initialization
+ * @hw: pointer to HW struct
+ *
+ * Perform PHC initialization steps specific to E822 devices.
+ */
+static enum ice_status ice_ptp_init_phc_e822(struct ice_hw *hw)
+{
+	enum ice_status status;
+	u32 regval;
+
+	/* Enable reading switch and PHY registers over the sideband queue */
+#define PF_SB_REM_DEV_CTL_SWITCH_READ BIT(1)
+#define PF_SB_REM_DEV_CTL_PHY0 BIT(2)
+	regval = rd32(hw, PF_SB_REM_DEV_CTL);
+	regval |= (PF_SB_REM_DEV_CTL_SWITCH_READ |
+		   PF_SB_REM_DEV_CTL_PHY0);
+	wr32(hw, PF_SB_REM_DEV_CTL, regval);
+
+	/* Initialize the Clock Generation Unit */
+	status = ice_init_cgu_e822(hw);
+	if (status)
+		return status;
+
+	/* Set window length for all the ports */
+	return ice_ptp_set_vernier_wl(hw);
+}
+
 /**
  * ice_ptp_prep_phy_time_e822 - Prepare PHY port with initial time
  * @hw: pointer to the HW struct
@@ -1445,6 +1754,21 @@ enum ice_status ice_ptp_init_phy_e810(struct ice_hw *hw)
 	return status;
 }
 
+/**
+ * ice_ptp_init_phc_e810 - Perform E810 specific PHC initialization
+ * @hw: pointer to HW struct
+ *
+ * Perform E810-specific PTP hardware clock initialization steps.
+ */
+static enum ice_status ice_ptp_init_phc_e810(struct ice_hw *hw)
+{
+	/* Ensure synchronization delay is zero */
+	wr32(hw, GLTSYN_SYNC_DLAY, 0);
+
+	/* Initialize the PHY */
+	return ice_ptp_init_phy_e810(hw);
+}
+
 /**
  * ice_ptp_prep_phy_time_e810 - Prepare PHY port with initial time
  * @hw: Board private structure
@@ -2021,3 +2345,25 @@ ice_clear_phy_tstamp(struct ice_hw *hw, u8 block, u8 idx)
 	else
 		return ice_clear_phy_tstamp_e822(hw, block, idx);
 }
+
+/**
+ * ice_ptp_init_phc - Initialize PTP hardware clock
+ * @hw: pointer to the HW struct
+ *
+ * Perform the steps required to initialize the PTP hardware clock.
+ */
+enum ice_status ice_ptp_init_phc(struct ice_hw *hw)
+{
+	u8 src_idx = hw->func_caps.ts_func_info.tmr_index_owned;
+
+	/* Enable source clocks */
+	wr32(hw, GLTSYN_ENA(src_idx), GLTSYN_ENA_TSYN_ENA_M);
+
+	/* Clear event status indications for auxiliary pins */
+	(void)rd32(hw, GLTSYN_STAT(src_idx));
+
+	if (ice_is_e810(hw))
+		return ice_ptp_init_phc_e810(hw);
+	else
+		return ice_ptp_init_phc_e822(hw);
+}
diff --git a/drivers/net/ice/base/ice_ptp_hw.h b/drivers/net/ice/base/ice_ptp_hw.h
index 8cbe81792d..eb0e410ed8 100644
--- a/drivers/net/ice/base/ice_ptp_hw.h
+++ b/drivers/net/ice/base/ice_ptp_hw.h
@@ -55,6 +55,26 @@ struct ice_time_ref_info_e822 {
 	u8 pps_delay;
 };
 
+/**
+ * struct ice_cgu_pll_params_e822
+ * @refclk_pre_div: Reference clock pre-divisor
+ * @feedback_div: Feedback divisor
+ * @frac_n_div: Fractional divisor
+ * @post_pll_div: Post PLL divisor
+ *
+ * Clock Generation Unit parameters used to program the PLL based on the
+ * selected TIME_REF frequency.
+ */
+struct ice_cgu_pll_params_e822 {
+	u32 refclk_pre_div;
+	u32 feedback_div;
+	u32 frac_n_div;
+	u32 post_pll_div;
+};
+
+extern const struct
+ice_cgu_pll_params_e822 e822_cgu_params[NUM_ICE_TIME_REF_FREQ];
+
 /* Table of constants related to possible TIME_REF sources */
 extern const struct ice_time_ref_info_e822 e822_time_ref[NUM_ICE_TIME_REF_FREQ];
 
@@ -79,6 +99,7 @@ enum ice_status
 ice_read_phy_tstamp(struct ice_hw *hw, u8 block, u8 idx, u64 *tstamp);
 enum ice_status
 ice_clear_phy_tstamp(struct ice_hw *hw, u8 block, u8 idx);
+enum ice_status ice_ptp_init_phc(struct ice_hw *hw);
 
 /* E822 family functions */
 enum ice_status
@@ -99,6 +120,9 @@ ice_ptp_read_port_capture(struct ice_hw *hw, u8 port, u64 *tx_ts, u64 *rx_ts);
 enum ice_status
 ice_ptp_one_port_cmd(struct ice_hw *hw, u8 port, enum ice_ptp_tmr_cmd cmd,
 		     bool lock_sbq);
+enum ice_status
+ice_cfg_cgu_pll_e822(struct ice_hw *hw, enum ice_time_ref_freq clk_freq,
+		     enum ice_clk_src clk_src);
 
 static inline u64 ice_e822_pll_freq(enum ice_time_ref_freq time_ref)
 {
-- 
2.26.2