From: Jiawen Wu <jiawenwu@trustnetic.com>
To: dev@dpdk.org
Cc: Jiawen Wu <jiawenwu@trustnetic.com>, stable@dpdk.org
Subject: [dpdk-dev] [PATCH 2/3] net/txgbe: fix to read SFP module's SFF-8472 data
Date: Thu, 12 Aug 2021 10:00:19 +0800 [thread overview]
Message-ID: <20210812020020.12656-3-jiawenwu@trustnetic.com> (raw)
In-Reply-To: <20210812020020.12656-1-jiawenwu@trustnetic.com>
Fix the I2C target address selection to read SFP module's SFF-8472 data.
Fixes: 8f09fb4642fa ("net/txgbe: add module identify")
Cc: stable@dpdk.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
---
drivers/net/txgbe/base/txgbe_phy.c | 18 +++++++-----------
1 file changed, 7 insertions(+), 11 deletions(-)
diff --git a/drivers/net/txgbe/base/txgbe_phy.c b/drivers/net/txgbe/base/txgbe_phy.c
index 3e9f507212..2db87ae0c5 100644
--- a/drivers/net/txgbe/base/txgbe_phy.c
+++ b/drivers/net/txgbe/base/txgbe_phy.c
@@ -8,7 +8,7 @@
#include "txgbe_mng.h"
#include "txgbe_phy.h"
-static void txgbe_i2c_start(struct txgbe_hw *hw);
+static void txgbe_i2c_start(struct txgbe_hw *hw, u8 dev_addr);
static void txgbe_i2c_stop(struct txgbe_hw *hw);
static s32 txgbe_handle_bp_flow(u32 link_mode, struct txgbe_hw *hw);
static void txgbe_get_bp_ability(struct txgbe_backplane_ability *ability,
@@ -1248,11 +1248,9 @@ s32 txgbe_write_i2c_eeprom(struct txgbe_hw *hw, u8 byte_offset,
s32 txgbe_read_i2c_byte_unlocked(struct txgbe_hw *hw, u8 byte_offset,
u8 dev_addr, u8 *data)
{
- UNREFERENCED_PARAMETER(dev_addr);
-
DEBUGFUNC("txgbe_read_i2c_byte");
- txgbe_i2c_start(hw);
+ txgbe_i2c_start(hw, dev_addr);
/* wait tx empty */
if (!po32m(hw, TXGBE_I2CICR, TXGBE_I2CICR_TXEMPTY,
@@ -1314,11 +1312,9 @@ s32 txgbe_read_i2c_byte(struct txgbe_hw *hw, u8 byte_offset,
s32 txgbe_write_i2c_byte_unlocked(struct txgbe_hw *hw, u8 byte_offset,
u8 dev_addr, u8 data)
{
- UNREFERENCED_PARAMETER(dev_addr);
-
DEBUGFUNC("txgbe_write_i2c_byte");
- txgbe_i2c_start(hw);
+ txgbe_i2c_start(hw, dev_addr);
/* wait tx empty */
if (!po32m(hw, TXGBE_I2CICR, TXGBE_I2CICR_TXEMPTY,
@@ -1369,7 +1365,7 @@ s32 txgbe_write_i2c_byte(struct txgbe_hw *hw, u8 byte_offset,
*
* Sets I2C start condition (High -> Low on SDA while SCL is High)
**/
-static void txgbe_i2c_start(struct txgbe_hw *hw)
+static void txgbe_i2c_start(struct txgbe_hw *hw, u8 dev_addr)
{
DEBUGFUNC("txgbe_i2c_start");
@@ -1380,9 +1376,9 @@ static void txgbe_i2c_start(struct txgbe_hw *hw)
TXGBE_I2CCON_SPEED(1) |
TXGBE_I2CCON_RESTART |
TXGBE_I2CCON_SDIA));
- wr32(hw, TXGBE_I2CTAR, TXGBE_I2C_SLAVEADDR);
- wr32(hw, TXGBE_I2CSSSCLHCNT, 600);
- wr32(hw, TXGBE_I2CSSSCLLCNT, 600);
+ wr32(hw, TXGBE_I2CTAR, dev_addr >> 1);
+ wr32(hw, TXGBE_I2CSSSCLHCNT, 200);
+ wr32(hw, TXGBE_I2CSSSCLLCNT, 200);
wr32(hw, TXGBE_I2CRXTL, 0); /* 1byte for rx full signal */
wr32(hw, TXGBE_I2CTXTL, 4);
wr32(hw, TXGBE_I2CSCLTMOUT, 0xFFFFFF);
--
2.21.0.windows.1
next prev parent reply other threads:[~2021-08-12 2:00 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-12 2:00 [dpdk-dev] [PATCH 0/3] Fixes for txgbe Jiawen Wu
2021-08-12 2:00 ` [dpdk-dev] [PATCH 1/3] net/txgbe: fix link status when device stopped Jiawen Wu
2021-08-12 2:00 ` Jiawen Wu [this message]
2021-08-12 2:00 ` [dpdk-dev] [PATCH 3/3] net/txgbe: fix L4 port mask in FDIR Jiawen Wu
2021-08-18 14:06 ` [dpdk-dev] [PATCH 0/3] Fixes for txgbe Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210812020020.12656-3-jiawenwu@trustnetic.com \
--to=jiawenwu@trustnetic.com \
--cc=dev@dpdk.org \
--cc=stable@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).