[dpdk-dev] [PATCH] net/bnxt: fix to reset Rx next consumer index

[dpdk-dev] [PATCH] net/bnxt: fix to reset Rx next consumer index

[Somnath Kotur]

In bnxt_init_one_rx_ring(), reset this variable internal to the driver
ring to 0, so that there is no mismatch with actual value in HW on
traffic resumption.

Fixes: 03c8f2fe111c ("net/bnxt: detect bad opaque in Rx completion")
Cc: stable@dpdk.org

Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
---
 drivers/net/bnxt/bnxt_rxr.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/bnxt/bnxt_rxr.c b/drivers/net/bnxt/bnxt_rxr.c
index aea71703d1..73fbdd17d1 100644
--- a/drivers/net/bnxt/bnxt_rxr.c
+++ b/drivers/net/bnxt/bnxt_rxr.c
@@ -1379,6 +1379,9 @@ int bnxt_init_one_rx_ring(struct bnxt_rx_queue *rxq)
 	}
 	PMD_DRV_LOG(DEBUG, "TPA alloc Done!\n");
 
+	/* Explicitly reset this driver internal tracker on a ring init */
+	rxr->rx_next_cons = 0;
+
 	return 0;
 }
 
-- 
2.28.0.497.g54e85e7

Re: [dpdk-dev] [PATCH] net/bnxt: fix to reset Rx next consumer index

[Ajit Khaparde]

[-- Attachment #1: Type: text/plain, Size: 1162 bytes --]

On Mon, Aug 9, 2021 at 11:11 PM Somnath Kotur <somnath.kotur@broadcom.com>
wrote:

> In bnxt_init_one_rx_ring(), reset this variable internal to the driver
> ring to 0, so that there is no mismatch with actual value in HW on
> traffic resumption.
>
> Fixes: 03c8f2fe111c ("net/bnxt: detect bad opaque in Rx completion")
> Cc: stable@dpdk.org
>
> Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
> Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
>
Patch applied to dpdk-next-net-brcm for-next-net branch.

---
>  drivers/net/bnxt/bnxt_rxr.c | 3 +++
>  1 file changed, 3 insertions(+)
>
> diff --git a/drivers/net/bnxt/bnxt_rxr.c b/drivers/net/bnxt/bnxt_rxr.c
> index aea71703d1..73fbdd17d1 100644
> --- a/drivers/net/bnxt/bnxt_rxr.c
> +++ b/drivers/net/bnxt/bnxt_rxr.c
> @@ -1379,6 +1379,9 @@ int bnxt_init_one_rx_ring(struct bnxt_rx_queue *rxq)
>         }
>         PMD_DRV_LOG(DEBUG, "TPA alloc Done!\n");
>
> +       /* Explicitly reset this driver internal tracker on a ring init */
> +       rxr->rx_next_cons = 0;
> +
>         return 0;
>  }
>
> --
> 2.28.0.497.g54e85e7
>
>

Re: [dpdk-dev] [PATCH] net/bnxt: fix to reset Rx next consumer index

[Ferruh Yigit]

On 8/10/2021 7:07 AM, Somnath Kotur wrote:
> In bnxt_init_one_rx_ring(), reset this variable internal to the driver
> ring to 0, so that there is no mismatch with actual value in HW on
> traffic resumption.
> 

Hi Somnath,

What is the impact of the patch, what are you fixing?

If the 'rx_next_cons' (next consumer index) is not matching with HW value, what
happens, does the Rx fails completely and unrecoverable? Or does miss one or
more packet?

And when/how this happens, since driver is not new I assume this doesn't happen
in first ring init. Does this happen after uninit and init again? Providing this
information helps clarifying scope of the fix.

Can you please send a new version with updated commit log?

Thanks,
ferruh

> Fixes: 03c8f2fe111c ("net/bnxt: detect bad opaque in Rx completion")
> Cc: stable@dpdk.org
> 
> Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
> Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
> ---
>  drivers/net/bnxt/bnxt_rxr.c | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/drivers/net/bnxt/bnxt_rxr.c b/drivers/net/bnxt/bnxt_rxr.c
> index aea71703d1..73fbdd17d1 100644
> --- a/drivers/net/bnxt/bnxt_rxr.c
> +++ b/drivers/net/bnxt/bnxt_rxr.c
> @@ -1379,6 +1379,9 @@ int bnxt_init_one_rx_ring(struct bnxt_rx_queue *rxq)
>  	}
>  	PMD_DRV_LOG(DEBUG, "TPA alloc Done!\n");
>  
> +	/* Explicitly reset this driver internal tracker on a ring init */
> +	rxr->rx_next_cons = 0;
> +
>  	return 0;
>  }
>  
> 

Re: [dpdk-dev] [PATCH] net/bnxt: fix to reset Rx next consumer index

[Somnath Kotur]

[-- Attachment #1: Type: text/plain, Size: 1828 bytes --]

Thank you Ferruh, have sent V2 with updated commit log, please see if it
sounds good now?

-Som

On Fri, Aug 20, 2021 at 6:17 PM Ferruh Yigit <ferruh.yigit@intel.com> wrote:

> On 8/10/2021 7:07 AM, Somnath Kotur wrote:
> > In bnxt_init_one_rx_ring(), reset this variable internal to the driver
> > ring to 0, so that there is no mismatch with actual value in HW on
> > traffic resumption.
> >
>
> Hi Somnath,
>
> What is the impact of the patch, what are you fixing?
>
> If the 'rx_next_cons' (next consumer index) is not matching with HW value,
> what
> happens, does the Rx fails completely and unrecoverable? Or does miss one
> or
> more packet?
>
> And when/how this happens, since driver is not new I assume this doesn't
> happen
> in first ring init. Does this happen after uninit and init again?
> Providing this
> information helps clarifying scope of the fix.
>
> Can you please send a new version with updated commit log?
>
> Thanks,
> ferruh
>
> > Fixes: 03c8f2fe111c ("net/bnxt: detect bad opaque in Rx completion")
> > Cc: stable@dpdk.org
> >
> > Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
> > Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
> > Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
> > ---
> >  drivers/net/bnxt/bnxt_rxr.c | 3 +++
> >  1 file changed, 3 insertions(+)
> >
> > diff --git a/drivers/net/bnxt/bnxt_rxr.c b/drivers/net/bnxt/bnxt_rxr.c
> > index aea71703d1..73fbdd17d1 100644
> > --- a/drivers/net/bnxt/bnxt_rxr.c
> > +++ b/drivers/net/bnxt/bnxt_rxr.c
> > @@ -1379,6 +1379,9 @@ int bnxt_init_one_rx_ring(struct bnxt_rx_queue
> *rxq)
> >       }
> >       PMD_DRV_LOG(DEBUG, "TPA alloc Done!\n");
> >
> > +     /* Explicitly reset this driver internal tracker on a ring init */
> > +     rxr->rx_next_cons = 0;
> > +
> >       return 0;
> >  }
> >
> >
>
>

[dpdk-dev] [PATCH v2] net/bnxt: fix to reset Rx next consumer index

[Somnath Kotur]

In bnxt_init_one_rx_ring(), reset this variable internal to the driver
ring to 0, so that there is no scope for any false mismatch errors being
flagged on traffic resumption. Typically, this would show up in a port 
stop/start sequence as then the HW would start afresh, but this driver
internal variable would still point to a stale value.

Fixes: 03c8f2fe111c ("net/bnxt: detect bad opaque in Rx completion")
Cc: stable@dpdk.org

Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
---
v2: Updated commit log as requested by Ferruh
 drivers/net/bnxt/bnxt_rxr.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/bnxt/bnxt_rxr.c b/drivers/net/bnxt/bnxt_rxr.c
index aea71703d1..73fbdd17d1 100644
--- a/drivers/net/bnxt/bnxt_rxr.c
+++ b/drivers/net/bnxt/bnxt_rxr.c
@@ -1379,6 +1379,9 @@ int bnxt_init_one_rx_ring(struct bnxt_rx_queue *rxq)
 	}
 	PMD_DRV_LOG(DEBUG, "TPA alloc Done!\n");
 
+	/* Explicitly reset this driver internal tracker on a ring init */
+	rxr->rx_next_cons = 0;
+
 	return 0;
 }
 
-- 
2.28.0.497.g54e85e7

[dpdk-dev] [PATCH v3] net/bnxt: fix crash after port stop/start

[Somnath Kotur]

In bnxt_init_one_rx_ring(), reset rx_next_cons to 0,
so that there is no scope for any false mismatch errors being
flagged on traffic resumption. Typically, this would show up in a port 
stop/start sequence as then the HW would start with fresh values, but
this driver internal variable would still point to a stale value.

Fixes: 03c8f2fe111c ("net/bnxt: detect bad opaque in Rx completion")
Cc: stable@dpdk.org

Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
---
v3: Updated commit log and summary as requested by Ferruh
 drivers/net/bnxt/bnxt_rxr.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/bnxt/bnxt_rxr.c b/drivers/net/bnxt/bnxt_rxr.c
index aea71703d1..73fbdd17d1 100644
--- a/drivers/net/bnxt/bnxt_rxr.c
+++ b/drivers/net/bnxt/bnxt_rxr.c
@@ -1379,6 +1379,9 @@ int bnxt_init_one_rx_ring(struct bnxt_rx_queue *rxq)
 	}
 	PMD_DRV_LOG(DEBUG, "TPA alloc Done!\n");
 
+	/* Explicitly reset this driver internal tracker on a ring init */
+	rxr->rx_next_cons = 0;
+
 	return 0;
 }
 
-- 
2.28.0.497.g54e85e7

[dpdk-dev] [PATCH v4] net/bnxt: fix crash after port stop/start

[Somnath Kotur]

On chips like Thor, port stop/start sequence could result in a crash
in the application. This is because of false detection of a bad
opaque in the Rx completion and the subsequent kicking-in of the ring
reset code to recover from the condition.
The root cause being that the port stop/start would result in the HW
starting with fresh values, while the driver internal tracker variable
`rx_next_cons` is still pointing to a stale value.
Fix this by reseting rx_next_cons to 0 in bnxt_init_one_rx_ring()

Fixes: 03c8f2fe111c ("net/bnxt: detect bad opaque in Rx completion")
Cc: stable@dpdk.org

Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
---
v4: Updated commit log as requested by Ferruh
v3: Updated commit log and summary as requested by Ferruh
v2: Updated commit log as requested by Ferruh
 drivers/net/bnxt/bnxt_rxr.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/bnxt/bnxt_rxr.c b/drivers/net/bnxt/bnxt_rxr.c
index aea71703d1..73fbdd17d1 100644
--- a/drivers/net/bnxt/bnxt_rxr.c
+++ b/drivers/net/bnxt/bnxt_rxr.c
@@ -1379,6 +1379,9 @@ int bnxt_init_one_rx_ring(struct bnxt_rx_queue *rxq)
 	}
 	PMD_DRV_LOG(DEBUG, "TPA alloc Done!\n");
 
+	/* Explicitly reset this driver internal tracker on a ring init */
+	rxr->rx_next_cons = 0;
+
 	return 0;
 }
 
-- 
2.28.0.497.g54e85e7

[dpdk-dev] [PATCH v4] net/bnxt: fix crash after port stop/start

[Somnath Kotur]

On chips like Thor, port stop/start sequence could result in a crash
in the application. This is because of false detection of a bad
opaque in the Rx completion and the subsequent kicking-in of the ring
reset code to recover from the condition.
The root cause being that the port stop/start would result in the HW
starting with fresh values, while the driver internal tracker variable
`rx_next_cons` is still pointing to a stale value.
Fix this by resetting rx_next_cons to 0 in bnxt_init_one_rx_ring()

Fixes: 03c8f2fe111c ("net/bnxt: detect bad opaque in Rx completion")
Cc: stable@dpdk.org

Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
---
v4: Updated commit log as requested by Ferruh
v3: Updated commit log and summary as requested by Ferruh
v2: Updated commit log as requested by Ferruh
 drivers/net/bnxt/bnxt_rxr.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/bnxt/bnxt_rxr.c b/drivers/net/bnxt/bnxt_rxr.c
index aea71703d1..73fbdd17d1 100644
--- a/drivers/net/bnxt/bnxt_rxr.c
+++ b/drivers/net/bnxt/bnxt_rxr.c
@@ -1379,6 +1379,9 @@ int bnxt_init_one_rx_ring(struct bnxt_rx_queue *rxq)
 	}
 	PMD_DRV_LOG(DEBUG, "TPA alloc Done!\n");
 
+	/* Explicitly reset this driver internal tracker on a ring init */
+	rxr->rx_next_cons = 0;
+
 	return 0;
 }
 
-- 
2.28.0.497.g54e85e7

Re: [dpdk-dev] [PATCH v4] net/bnxt: fix crash after port stop/start

[Ajit Khaparde]

[-- Attachment #1: Type: text/plain, Size: 932 bytes --]

On Mon, Aug 23, 2021 at 8:49 AM Somnath Kotur
<somnath.kotur@broadcom.com> wrote:
>
> On chips like Thor, port stop/start sequence could result in a crash
> in the application. This is because of false detection of a bad
> opaque in the Rx completion and the subsequent kicking-in of the ring
> reset code to recover from the condition.
> The root cause being that the port stop/start would result in the HW
> starting with fresh values, while the driver internal tracker variable
> `rx_next_cons` is still pointing to a stale value.
> Fix this by resetting rx_next_cons to 0 in bnxt_init_one_rx_ring()
>
> Fixes: 03c8f2fe111c ("net/bnxt: detect bad opaque in Rx completion")
> Cc: stable@dpdk.org
>
> Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
> Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Thanks Ferruh.
Patch applied to dpdk-next-net-brcm