From: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
To: Ajit Khaparde <ajit.khaparde@broadcom.com>,
Somnath Kotur <somnath.kotur@broadcom.com>,
John Daley <johndale@cisco.com>,
Hyong Youb Kim <hyonkim@cisco.com>,
Beilei Xing <beilei.xing@intel.com>,
Qiming Yang <qiming.yang@intel.com>,
Qi Zhang <qi.z.zhang@intel.com>,
Haiyue Wang <haiyue.wang@intel.com>,
Matan Azrad <matan@nvidia.com>,
Viacheslav Ovsiienko <viacheslavo@nvidia.com>,
Thomas Monjalon <thomas@monjalon.net>,
Ferruh Yigit <ferruh.yigit@intel.com>
Cc: dev@dpdk.org,
Viacheslav Galaktionov <viacheslav.galaktionov@oktetlabs.ru>
Subject: [dpdk-dev] [PATCH v5] ethdev: fix representor port ID search by name
Date: Mon, 13 Sep 2021 14:26:33 +0300 [thread overview]
Message-ID: <20210913112633.2836730-1-andrew.rybchenko@oktetlabs.ru> (raw)
In-Reply-To: <20210712161747.958019-1-andrew.rybchenko@oktetlabs.ru>
From: Viacheslav Galaktionov <viacheslav.galaktionov@oktetlabs.ru>
Getting a list of representors from a representor does not make sense.
Instead, a parent device should be used.
To this end, extend the rte_eth_dev_data structure to include the port ID
of the backing device for representors.
Signed-off-by: Viacheslav Galaktionov <viacheslav.galaktionov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
---
The new field is added into the hole in rte_eth_dev_data structure.
The patch does not change ABI, but extra care is required since ABI
check is disabled for the structure because of the libabigail bug [1].
It should not be a problem anyway since 21.11 is a ABI breaking release.
Potentially it is bad for out-of-tree drivers which implement
representors but do not fill in a new parert_port_id field in
rte_eth_dev_data structure. Get ID by name will not work.
mlx5 changes should be reviwed by maintainers very carefully, since
we are not sure if we patch it correctly.
[1] https://sourceware.org/bugzilla/show_bug.cgi?id=28060
v5:
- try to improve name: backer_port_id instead of parent_port_id
- init new field to RTE_MAX_ETHPORTS on allocation to avoid
zero port usage by default
v4:
- apply mlx5 review notes: remove fallback from generic ethdev
code and add fallback to mlx5 code to handle legacy usecase
v3:
- fix mlx5 build breakage
v2:
- fix mlx5 review notes
- try device port ID first before parent in order to address
backward compatibility issue
drivers/net/bnxt/bnxt_reps.c | 1 +
drivers/net/enic/enic_vf_representor.c | 1 +
drivers/net/i40e/i40e_vf_representor.c | 1 +
drivers/net/ice/ice_dcf_vf_representor.c | 1 +
drivers/net/ixgbe/ixgbe_vf_representor.c | 1 +
drivers/net/mlx5/linux/mlx5_os.c | 13 +++++++++++++
drivers/net/mlx5/windows/mlx5_os.c | 13 +++++++++++++
lib/ethdev/ethdev_driver.h | 6 +++---
lib/ethdev/rte_class_eth.c | 2 +-
lib/ethdev/rte_ethdev.c | 9 +++++----
lib/ethdev/rte_ethdev_core.h | 6 ++++++
11 files changed, 46 insertions(+), 8 deletions(-)
diff --git a/drivers/net/bnxt/bnxt_reps.c b/drivers/net/bnxt/bnxt_reps.c
index bdbad53b7d..0d50c0f1da 100644
--- a/drivers/net/bnxt/bnxt_reps.c
+++ b/drivers/net/bnxt/bnxt_reps.c
@@ -187,6 +187,7 @@ int bnxt_representor_init(struct rte_eth_dev *eth_dev, void *params)
eth_dev->data->dev_flags |= RTE_ETH_DEV_REPRESENTOR |
RTE_ETH_DEV_AUTOFILL_QUEUE_XSTATS;
eth_dev->data->representor_id = rep_params->vf_id;
+ eth_dev->data->backer_port_id = rep_params->parent_dev->data->port_id;
rte_eth_random_addr(vf_rep_bp->dflt_mac_addr);
memcpy(vf_rep_bp->mac_addr, vf_rep_bp->dflt_mac_addr,
diff --git a/drivers/net/enic/enic_vf_representor.c b/drivers/net/enic/enic_vf_representor.c
index 79dd6e5640..fedb09ecd6 100644
--- a/drivers/net/enic/enic_vf_representor.c
+++ b/drivers/net/enic/enic_vf_representor.c
@@ -662,6 +662,7 @@ int enic_vf_representor_init(struct rte_eth_dev *eth_dev, void *init_params)
eth_dev->data->dev_flags |= RTE_ETH_DEV_REPRESENTOR |
RTE_ETH_DEV_AUTOFILL_QUEUE_XSTATS;
eth_dev->data->representor_id = vf->vf_id;
+ eth_dev->data->backer_port_id = pf->port_id;
eth_dev->data->mac_addrs = rte_zmalloc("enic_mac_addr_vf",
sizeof(struct rte_ether_addr) *
ENIC_UNICAST_PERFECT_FILTERS, 0);
diff --git a/drivers/net/i40e/i40e_vf_representor.c b/drivers/net/i40e/i40e_vf_representor.c
index 0481b55381..d65b821a01 100644
--- a/drivers/net/i40e/i40e_vf_representor.c
+++ b/drivers/net/i40e/i40e_vf_representor.c
@@ -514,6 +514,7 @@ i40e_vf_representor_init(struct rte_eth_dev *ethdev, void *init_params)
ethdev->data->dev_flags |= RTE_ETH_DEV_REPRESENTOR |
RTE_ETH_DEV_AUTOFILL_QUEUE_XSTATS;
ethdev->data->representor_id = representor->vf_id;
+ ethdev->data->backer_port_id = pf->dev_data->port_id;
/* Setting the number queues allocated to the VF */
ethdev->data->nb_rx_queues = vf->vsi->nb_qps;
diff --git a/drivers/net/ice/ice_dcf_vf_representor.c b/drivers/net/ice/ice_dcf_vf_representor.c
index 970461f3e9..e51d0aa6b9 100644
--- a/drivers/net/ice/ice_dcf_vf_representor.c
+++ b/drivers/net/ice/ice_dcf_vf_representor.c
@@ -418,6 +418,7 @@ ice_dcf_vf_repr_init(struct rte_eth_dev *vf_rep_eth_dev, void *init_param)
vf_rep_eth_dev->data->dev_flags |= RTE_ETH_DEV_REPRESENTOR;
vf_rep_eth_dev->data->representor_id = repr->vf_id;
+ vf_rep_eth_dev->data->backer_port_id = repr->dcf_eth_dev->data->port_id;
vf_rep_eth_dev->data->mac_addrs = &repr->mac_addr;
diff --git a/drivers/net/ixgbe/ixgbe_vf_representor.c b/drivers/net/ixgbe/ixgbe_vf_representor.c
index d5b636a194..9fa75984fb 100644
--- a/drivers/net/ixgbe/ixgbe_vf_representor.c
+++ b/drivers/net/ixgbe/ixgbe_vf_representor.c
@@ -197,6 +197,7 @@ ixgbe_vf_representor_init(struct rte_eth_dev *ethdev, void *init_params)
ethdev->data->dev_flags |= RTE_ETH_DEV_REPRESENTOR;
ethdev->data->representor_id = representor->vf_id;
+ ethdev->data->backer_port_id = representor->pf_ethdev->data->port_id;
/* Set representor device ops */
ethdev->dev_ops = &ixgbe_vf_representor_dev_ops;
diff --git a/drivers/net/mlx5/linux/mlx5_os.c b/drivers/net/mlx5/linux/mlx5_os.c
index 470b16cb9a..1cddaaba1a 100644
--- a/drivers/net/mlx5/linux/mlx5_os.c
+++ b/drivers/net/mlx5/linux/mlx5_os.c
@@ -1677,6 +1677,19 @@ mlx5_dev_spawn(struct rte_device *dpdk_dev,
if (priv->representor) {
eth_dev->data->dev_flags |= RTE_ETH_DEV_REPRESENTOR;
eth_dev->data->representor_id = priv->representor_id;
+ MLX5_ETH_FOREACH_DEV(port_id, &priv->pci_dev->device) {
+ struct mlx5_priv *opriv =
+ rte_eth_devices[port_id].data->dev_private;
+ if (opriv &&
+ opriv->master &&
+ opriv->domain_id == priv->domain_id &&
+ opriv->sh == priv->sh) {
+ eth_dev->data->backer_port_id = port_id;
+ break;
+ }
+ }
+ if (port_id >= RTE_MAX_ETHPORTS)
+ eth_dev->data->backer_port_id = eth_dev->data->port_id;
}
priv->mp_id.port_id = eth_dev->data->port_id;
strlcpy(priv->mp_id.name, MLX5_MP_NAME, RTE_MP_MAX_NAME_LEN);
diff --git a/drivers/net/mlx5/windows/mlx5_os.c b/drivers/net/mlx5/windows/mlx5_os.c
index 26fa927039..a9c244c7dc 100644
--- a/drivers/net/mlx5/windows/mlx5_os.c
+++ b/drivers/net/mlx5/windows/mlx5_os.c
@@ -543,6 +543,19 @@ mlx5_dev_spawn(struct rte_device *dpdk_dev,
if (priv->representor) {
eth_dev->data->dev_flags |= RTE_ETH_DEV_REPRESENTOR;
eth_dev->data->representor_id = priv->representor_id;
+ MLX5_ETH_FOREACH_DEV(port_id, &priv->pci_dev->device) {
+ struct mlx5_priv *opriv =
+ rte_eth_devices[port_id].data->dev_private;
+ if (opriv &&
+ opriv->master &&
+ opriv->domain_id == priv->domain_id &&
+ opriv->sh == priv->sh) {
+ eth_dev->data->backer_port_id = port_id;
+ break;
+ }
+ }
+ if (port_id >= RTE_MAX_ETHPORTS)
+ eth_dev->data->backer_port_id = eth_dev->data->port_id;
}
/*
* Store associated network device interface index. This index
diff --git a/lib/ethdev/ethdev_driver.h b/lib/ethdev/ethdev_driver.h
index 40e474aa7e..b940e6cb38 100644
--- a/lib/ethdev/ethdev_driver.h
+++ b/lib/ethdev/ethdev_driver.h
@@ -1248,8 +1248,8 @@ struct rte_eth_devargs {
* For backward compatibility, if no representor info, direct
* map legacy VF (no controller and pf).
*
- * @param ethdev
- * Handle of ethdev port.
+ * @param port_id
+ * Port ID of the backing device.
* @param type
* Representor type.
* @param controller
@@ -1266,7 +1266,7 @@ struct rte_eth_devargs {
*/
__rte_internal
int
-rte_eth_representor_id_get(const struct rte_eth_dev *ethdev,
+rte_eth_representor_id_get(uint16_t port_id,
enum rte_eth_representor_type type,
int controller, int pf, int representor_port,
uint16_t *repr_id);
diff --git a/lib/ethdev/rte_class_eth.c b/lib/ethdev/rte_class_eth.c
index 1fe5fa1f36..eda216ced5 100644
--- a/lib/ethdev/rte_class_eth.c
+++ b/lib/ethdev/rte_class_eth.c
@@ -95,7 +95,7 @@ eth_representor_cmp(const char *key __rte_unused,
c = i / (np * nf);
p = (i / nf) % np;
f = i % nf;
- if (rte_eth_representor_id_get(edev,
+ if (rte_eth_representor_id_get(edev->data->backer_port_id,
eth_da.type,
eth_da.nb_mh_controllers == 0 ? -1 :
eth_da.mh_controllers[c],
diff --git a/lib/ethdev/rte_ethdev.c b/lib/ethdev/rte_ethdev.c
index daf5ca9242..7c9b0d6b3b 100644
--- a/lib/ethdev/rte_ethdev.c
+++ b/lib/ethdev/rte_ethdev.c
@@ -524,6 +524,7 @@ rte_eth_dev_allocate(const char *name)
eth_dev = eth_dev_get(port_id);
strlcpy(eth_dev->data->name, name, sizeof(eth_dev->data->name));
eth_dev->data->port_id = port_id;
+ eth_dev->data->backer_port_id = RTE_MAX_ETHPORTS;
eth_dev->data->mtu = RTE_ETHER_MTU;
pthread_mutex_init(ð_dev->data->flow_ops_mutex, NULL);
@@ -5996,7 +5997,7 @@ rte_eth_devargs_parse(const char *dargs, struct rte_eth_devargs *eth_da)
}
int
-rte_eth_representor_id_get(const struct rte_eth_dev *ethdev,
+rte_eth_representor_id_get(uint16_t port_id,
enum rte_eth_representor_type type,
int controller, int pf, int representor_port,
uint16_t *repr_id)
@@ -6012,7 +6013,7 @@ rte_eth_representor_id_get(const struct rte_eth_dev *ethdev,
return -EINVAL;
/* Get PMD representor range info. */
- ret = rte_eth_representor_info_get(ethdev->data->port_id, NULL);
+ ret = rte_eth_representor_info_get(port_id, NULL);
if (ret == -ENOTSUP && type == RTE_ETH_REPRESENTOR_VF &&
controller == -1 && pf == -1) {
/* Direct mapping for legacy VF representor. */
@@ -6027,7 +6028,7 @@ rte_eth_representor_id_get(const struct rte_eth_dev *ethdev,
if (info == NULL)
return -ENOMEM;
info->nb_ranges_alloc = n;
- ret = rte_eth_representor_info_get(ethdev->data->port_id, info);
+ ret = rte_eth_representor_info_get(port_id, info);
if (ret < 0)
goto out;
@@ -6046,7 +6047,7 @@ rte_eth_representor_id_get(const struct rte_eth_dev *ethdev,
continue;
if (info->ranges[i].id_end < info->ranges[i].id_base) {
RTE_LOG(WARNING, EAL, "Port %hu invalid representor ID Range %u - %u, entry %d\n",
- ethdev->data->port_id, info->ranges[i].id_base,
+ port_id, info->ranges[i].id_base,
info->ranges[i].id_end, i);
continue;
diff --git a/lib/ethdev/rte_ethdev_core.h b/lib/ethdev/rte_ethdev_core.h
index edf96de2dc..48b814e8a1 100644
--- a/lib/ethdev/rte_ethdev_core.h
+++ b/lib/ethdev/rte_ethdev_core.h
@@ -185,6 +185,12 @@ struct rte_eth_dev_data {
/**< Switch-specific identifier.
* Valid if RTE_ETH_DEV_REPRESENTOR in dev_flags.
*/
+ uint16_t backer_port_id;
+ /**< Port ID of the backing device.
+ * This device will be used to query representor
+ * info and calculate representor IDs.
+ * Valid if RTE_ETH_DEV_REPRESENTOR in dev_flags.
+ */
pthread_mutex_t flow_ops_mutex; /**< rte_flow ops mutex. */
uint64_t reserved_64s[4]; /**< Reserved for future fields */
--
2.30.2
next prev parent reply other threads:[~2021-09-13 11:26 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-12 16:17 [dpdk-dev] [PATCH] " Andrew Rybchenko
2021-07-19 6:58 ` Xueming(Steven) Li
2021-07-19 8:46 ` Andrew Rybchenko
2021-07-19 11:54 ` Xueming(Steven) Li
2021-07-19 12:36 ` Andrew Rybchenko
2021-07-19 12:50 ` Xueming(Steven) Li
2021-07-20 8:59 ` Andrew Rybchenko
2021-07-29 4:13 ` Xueming(Steven) Li
2021-08-01 8:40 ` Andrew Rybchenko
2021-08-01 14:25 ` Xueming(Steven) Li
2021-07-29 4:20 ` Xueming(Steven) Li
2021-08-01 8:50 ` Andrew Rybchenko
2021-08-01 14:15 ` Xueming(Steven) Li
2021-08-18 14:00 ` [dpdk-dev] [PATCH v2] " Andrew Rybchenko
2021-08-27 9:18 ` Xueming(Steven) Li
2021-08-27 9:48 ` Viacheslav Galaktionov
2021-08-28 13:22 ` Xueming(Steven) Li
2021-08-29 8:23 ` Andrew Rybchenko
2021-08-29 12:17 ` Xueming(Steven) Li
2021-08-31 15:42 ` Andrew Rybchenko
2021-08-20 12:18 ` [dpdk-dev] [PATCH v3] " Andrew Rybchenko
2021-08-31 15:41 ` Andrew Rybchenko
2021-08-31 16:06 ` [dpdk-dev] [PATCH v4] " Andrew Rybchenko
2021-08-31 16:32 ` Wang, Haiyue
2021-08-31 16:37 ` Andrew Rybchenko
2021-09-01 5:15 ` Xing, Beilei
2021-09-01 14:55 ` Ferruh Yigit
2021-09-06 16:16 ` Viacheslav Galaktionov
2021-09-13 11:26 ` Andrew Rybchenko [this message]
2021-09-29 11:13 ` [dpdk-dev] [PATCH v5] " Singh, Aman Deep
2021-09-30 12:03 ` Andrew Rybchenko
2021-09-30 12:51 ` Singh, Aman Deep
2021-09-30 13:40 ` Andrew Rybchenko
2021-10-01 11:39 ` Andrew Rybchenko
2021-10-08 8:39 ` Xueming(Steven) Li
2021-10-05 21:56 ` Thomas Monjalon
2021-10-07 10:20 ` Andrew Rybchenko
2021-10-07 12:39 ` Thomas Monjalon
2021-10-08 9:27 ` [dpdk-dev] [PATCH v6] " Andrew Rybchenko
2021-10-11 7:56 ` Slava Ovsiienko
2021-10-11 12:30 ` [dpdk-dev] [PATCH v7] " Andrew Rybchenko
2021-10-11 12:53 ` [dpdk-dev] [PATCH v8] " Andrew Rybchenko
2021-10-12 15:09 ` Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210913112633.2836730-1-andrew.rybchenko@oktetlabs.ru \
--to=andrew.rybchenko@oktetlabs.ru \
--cc=ajit.khaparde@broadcom.com \
--cc=beilei.xing@intel.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
--cc=haiyue.wang@intel.com \
--cc=hyonkim@cisco.com \
--cc=johndale@cisco.com \
--cc=matan@nvidia.com \
--cc=qi.z.zhang@intel.com \
--cc=qiming.yang@intel.com \
--cc=somnath.kotur@broadcom.com \
--cc=thomas@monjalon.net \
--cc=viacheslav.galaktionov@oktetlabs.ru \
--cc=viacheslavo@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).