From: Simei Su <simei.su@intel.com>
To: qi.z.zhang@intel.com
Cc: dev@dpdk.org, haiyue.wang@intel.com, Simei Su <simei.su@intel.com>
Subject: [dpdk-dev] [PATCH v3] net/ice: add 1PPS support for E810
Date: Wed, 15 Sep 2021 13:34:22 +0800 [thread overview]
Message-ID: <20210915053422.319489-1-simei.su@intel.com> (raw)
In-Reply-To: <20210909013049.444061-1-simei.su@intel.com>
The E810 supports four single-ended GPIO signals (SDP[20:23]). The 1PPS
signal outputs via SDP[20:23], which is measured by an oscilloscope.
This feature can be turned by a devargs which can select GPIO pin index
flexibly. Pin index 0 means SDP20, pin index 1 means SDP21 and so on.
The example for test command is as below:
./build/app/dpdk-testpmd -a af:00.0,pps_out='[pin:2]' -c f -n 4 -- -i
Signed-off-by: Simei Su <simei.su@intel.com>
---
v3:
* Rebase patch based on the latest code.
v2:
* Update the ice.rst for the new devargs.
* Add the release notes.
doc/guides/nics/ice.rst | 8 ++
doc/guides/rel_notes/release_21_11.rst | 4 +
drivers/net/ice/ice_ethdev.c | 197 +++++++++++++++++++++++++++++++++
drivers/net/ice/ice_ethdev.h | 15 +++
4 files changed, 224 insertions(+)
diff --git a/doc/guides/nics/ice.rst b/doc/guides/nics/ice.rst
index 5bc472f..ebe2cbc 100644
--- a/doc/guides/nics/ice.rst
+++ b/doc/guides/nics/ice.rst
@@ -219,6 +219,14 @@ Runtime Config Options
These ICE_DBG_XXX are defined in ``drivers/net/ice/base/ice_type.h``.
+- ``1PPS out support``
+
+ The E810 supports four single-ended GPIO signals (SDP[20:23]). The 1PPS
+ signal outputs via SDP[20:23]. User can select GPIO pin index flexibly.
+ Pin index 0 means SDP20, 1 means SDP21 and so on. For example::
+
+ -a af:00.0,pps_out='[pin:0]'
+
Driver compilation and testing
------------------------------
diff --git a/doc/guides/rel_notes/release_21_11.rst b/doc/guides/rel_notes/release_21_11.rst
index 1465403..dc44739 100644
--- a/doc/guides/rel_notes/release_21_11.rst
+++ b/doc/guides/rel_notes/release_21_11.rst
@@ -67,6 +67,10 @@ New Features
Added command-line options to specify total number of processes and
current process ID. Each process owns subset of Rx and Tx queues.
+* **Updated Intel ice driver.**
+
+ Added 1PPS out support by a devargs.
+
Removed Items
-------------
diff --git a/drivers/net/ice/ice_ethdev.c b/drivers/net/ice/ice_ethdev.c
index 8d62b84..76dcabf 100644
--- a/drivers/net/ice/ice_ethdev.c
+++ b/drivers/net/ice/ice_ethdev.c
@@ -29,15 +29,20 @@
#define ICE_PIPELINE_MODE_SUPPORT_ARG "pipeline-mode-support"
#define ICE_PROTO_XTR_ARG "proto_xtr"
#define ICE_HW_DEBUG_MASK_ARG "hw_debug_mask"
+#define ICE_ONE_PPS_OUT_ARG "pps_out"
static const char * const ice_valid_args[] = {
ICE_SAFE_MODE_SUPPORT_ARG,
ICE_PIPELINE_MODE_SUPPORT_ARG,
ICE_PROTO_XTR_ARG,
ICE_HW_DEBUG_MASK_ARG,
+ ICE_ONE_PPS_OUT_ARG,
NULL
};
+#define NSEC_PER_SEC 1000000000
+#define PPS_OUT_DELAY_NS 1
+
static const struct rte_mbuf_dynfield ice_proto_xtr_metadata_param = {
.name = "intel_pmd_dynfield_proto_xtr_metadata",
.size = sizeof(uint32_t),
@@ -1786,6 +1791,125 @@ parse_u64(const char *key, const char *value, void *args)
return 0;
}
+static int
+lookup_pps_type(const char *pps_name)
+{
+ static struct {
+ const char *name;
+ enum pps_type type;
+ } pps_type_map[] = {
+ { "pin", PPS_PIN },
+ };
+
+ uint32_t i;
+
+ for (i = 0; i < RTE_DIM(pps_type_map); i++) {
+ if (strcmp(pps_name, pps_type_map[i].name) == 0)
+ return pps_type_map[i].type;
+ }
+
+ return -1;
+}
+
+static int
+parse_pin_set(const char *input, int pps_type, struct ice_devargs *devargs)
+{
+ const char *str = input;
+ char *end = NULL;
+ uint32_t idx;
+
+ while (isblank(*str))
+ str++;
+
+ if (!isdigit(*str))
+ return -1;
+
+ if (pps_type == PPS_PIN) {
+ idx = strtoul(str, &end, 10);
+ if (end == NULL || idx >= ICE_MAX_PIN_NUM)
+ return -1;
+
+ devargs->pin_idx = idx;
+ devargs->pps_out_ena = 1;
+ }
+
+ while (isblank(*end))
+ end++;
+
+ if (*end != ']')
+ return -1;
+
+ return 0;
+}
+
+static int
+parse_pps_out_parameter(const char *pins, struct ice_devargs *devargs)
+{
+ const char *pin_start;
+ uint32_t idx;
+ int pps_type;
+ char pps_name[32];
+
+ while (isblank(*pins))
+ pins++;
+
+ pins++;
+ while (isblank(*pins))
+ pins++;
+ if (*pins == '\0')
+ return -1;
+
+ for (idx = 0; ; idx++) {
+ if (isblank(pins[idx]) ||
+ pins[idx] == ':' ||
+ pins[idx] == '\0')
+ break;
+
+ pps_name[idx] = pins[idx];
+ }
+ pps_name[idx] = '\0';
+ pps_type = lookup_pps_type(pps_name);
+ if (pps_type < 0)
+ return -1;
+
+ pins += idx;
+
+ pins += strcspn(pins, ":");
+ if (*pins++ != ':')
+ return -1;
+ while (isblank(*pins))
+ pins++;
+
+ pin_start = pins;
+
+ while (isblank(*pins))
+ pins++;
+
+ if (parse_pin_set(pin_start, pps_type, devargs) < 0)
+ return -1;
+
+ return 0;
+}
+
+static int
+handle_pps_out_arg(__rte_unused const char *key, const char *value,
+ void *extra_args)
+{
+ struct ice_devargs *devargs = extra_args;
+
+ if (value == NULL || extra_args == NULL)
+ return -EINVAL;
+
+ if (parse_pps_out_parameter(value, devargs) < 0) {
+ PMD_DRV_LOG(ERR,
+ "The GPIO pin parameter is wrong : '%s'",
+ value);
+ return -1;
+ }
+
+ return 0;
+}
+
static int ice_parse_devargs(struct rte_eth_dev *dev)
{
struct ice_adapter *ad =
@@ -1827,6 +1951,11 @@ static int ice_parse_devargs(struct rte_eth_dev *dev)
if (ret)
goto bail;
+ ret = rte_kvargs_process(kvlist, ICE_ONE_PPS_OUT_ARG,
+ &handle_pps_out_arg, &ad->devargs);
+ if (ret)
+ goto bail;
+
bail:
rte_kvargs_free(kvlist);
return ret;
@@ -2286,6 +2415,9 @@ ice_dev_close(struct rte_eth_dev *dev)
struct ice_adapter *ad =
ICE_DEV_PRIVATE_TO_ADAPTER(dev->data->dev_private);
int ret;
+ uint32_t val;
+ uint8_t timer = hw->func_caps.ts_func_info.tmr_index_owned;
+ uint32_t pin_idx = ad->devargs.pin_idx;
if (rte_eal_process_type() != RTE_PROC_PRIMARY)
return 0;
@@ -2315,6 +2447,16 @@ ice_dev_close(struct rte_eth_dev *dev)
rte_free(pf->proto_xtr);
pf->proto_xtr = NULL;
+ if (ad->devargs.pps_out_ena) {
+ ICE_WRITE_REG(hw, GLTSYN_AUX_OUT(pin_idx, timer), 0);
+ ICE_WRITE_REG(hw, GLTSYN_CLKO(pin_idx, timer), 0);
+ ICE_WRITE_REG(hw, GLTSYN_TGT_L(pin_idx, timer), 0);
+ ICE_WRITE_REG(hw, GLTSYN_TGT_H(pin_idx, timer), 0);
+
+ val = GLGEN_GPIO_CTL_PIN_DIR_M;
+ ICE_WRITE_REG(hw, GLGEN_GPIO_CTL(pin_idx), val);
+ }
+
/* disable uio intr before callback unregister */
rte_intr_disable(intr_handle);
@@ -3318,16 +3460,63 @@ ice_get_init_link_status(struct rte_eth_dev *dev)
}
static int
+ice_pps_out_cfg(struct ice_hw *hw, int idx, int timer)
+{
+ uint64_t current_time, start_time;
+ uint32_t hi, lo, lo2, func, val;
+
+ lo = ICE_READ_REG(hw, GLTSYN_TIME_L(timer));
+ hi = ICE_READ_REG(hw, GLTSYN_TIME_H(timer));
+ lo2 = ICE_READ_REG(hw, GLTSYN_TIME_L(timer));
+
+ if (lo2 < lo) {
+ lo = ICE_READ_REG(hw, GLTSYN_TIME_L(timer));
+ hi = ICE_READ_REG(hw, GLTSYN_TIME_H(timer));
+ }
+
+ current_time = ((uint64_t)hi << 32) | lo;
+
+ start_time = (current_time + NSEC_PER_SEC) /
+ NSEC_PER_SEC * NSEC_PER_SEC;
+ start_time = start_time - PPS_OUT_DELAY_NS;
+
+ func = 8 + idx + timer * 4;
+ val = GLGEN_GPIO_CTL_PIN_DIR_M |
+ ((func << GLGEN_GPIO_CTL_PIN_FUNC_S) &
+ GLGEN_GPIO_CTL_PIN_FUNC_M);
+
+ /* Write clkout with half of period value */
+ ICE_WRITE_REG(hw, GLTSYN_CLKO(idx, timer), NSEC_PER_SEC / 2);
+
+ /* Write TARGET time register */
+ ICE_WRITE_REG(hw, GLTSYN_TGT_L(idx, timer), start_time & 0xffffffff);
+ ICE_WRITE_REG(hw, GLTSYN_TGT_H(idx, timer), start_time >> 32);
+
+ /* Write AUX_OUT register */
+ ICE_WRITE_REG(hw, GLTSYN_AUX_OUT(idx, timer),
+ GLTSYN_AUX_OUT_0_OUT_ENA_M | GLTSYN_AUX_OUT_0_OUTMOD_M);
+
+ /* Write GPIO CTL register */
+ ICE_WRITE_REG(hw, GLGEN_GPIO_CTL(idx), val);
+
+ return 0;
+}
+
+static int
ice_dev_start(struct rte_eth_dev *dev)
{
struct rte_eth_dev_data *data = dev->data;
struct ice_hw *hw = ICE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
struct ice_pf *pf = ICE_DEV_PRIVATE_TO_PF(dev->data->dev_private);
struct ice_vsi *vsi = pf->main_vsi;
+ struct ice_adapter *ad =
+ ICE_DEV_PRIVATE_TO_ADAPTER(dev->data->dev_private);
uint16_t nb_rxq = 0;
uint16_t nb_txq, i;
uint16_t max_frame_size;
int mask, ret;
+ uint8_t timer = hw->func_caps.ts_func_info.tmr_index_owned;
+ uint32_t pin_idx = ad->devargs.pin_idx;
/* program Tx queues' context in hardware */
for (nb_txq = 0; nb_txq < data->nb_tx_queues; nb_txq++) {
@@ -3398,6 +3587,14 @@ ice_dev_start(struct rte_eth_dev *dev)
/* Set the max frame size to HW*/
ice_aq_set_mac_cfg(hw, max_frame_size, NULL);
+ if (ad->devargs.pps_out_ena) {
+ ret = ice_pps_out_cfg(hw, pin_idx, timer);
+ if (ret) {
+ PMD_DRV_LOG(ERR, "Fail to configure 1pps out");
+ goto rx_err;
+ }
+ }
+
return 0;
/* stop the started queues if failed to start all queues */
diff --git a/drivers/net/ice/ice_ethdev.h b/drivers/net/ice/ice_ethdev.h
index b4bf651..ea9d892 100644
--- a/drivers/net/ice/ice_ethdev.h
+++ b/drivers/net/ice/ice_ethdev.h
@@ -143,6 +143,12 @@
/* Max number of flexible descriptor rxdid */
#define ICE_FLEX_DESC_RXDID_MAX_NUM 64
+/* Per-channel register definitions */
+#define GLTSYN_AUX_OUT(_chan, _idx) (GLTSYN_AUX_OUT_0(_idx) + ((_chan) * 8))
+#define GLTSYN_CLKO(_chan, _idx) (GLTSYN_CLKO_0(_idx) + ((_chan) * 8))
+#define GLTSYN_TGT_L(_chan, _idx) (GLTSYN_TGT_L_0(_idx) + ((_chan) * 16))
+#define GLTSYN_TGT_H(_chan, _idx) (GLTSYN_TGT_H_0(_idx) + ((_chan) * 16))
+
/* DDP package type */
enum ice_pkg_type {
ICE_PKG_TYPE_UNKNOWN,
@@ -150,6 +156,12 @@ enum ice_pkg_type {
ICE_PKG_TYPE_COMMS,
};
+enum pps_type {
+ PPS_NONE,
+ PPS_PIN,
+ PPS_MAX,
+};
+
struct ice_adapter;
/**
@@ -458,6 +470,7 @@ struct ice_pf {
};
#define ICE_MAX_QUEUE_NUM 2048
+#define ICE_MAX_PIN_NUM 4
/**
* Cache devargs parse result.
@@ -467,6 +480,8 @@ struct ice_devargs {
uint8_t proto_xtr_dflt;
int pipe_mode_support;
uint8_t proto_xtr[ICE_MAX_QUEUE_NUM];
+ uint8_t pin_idx;
+ uint8_t pps_out_ena;
};
/**
--
2.9.5
next prev parent reply other threads:[~2021-09-15 5:42 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-02 7:39 [dpdk-dev] [PATCH] " Simei Su
2021-09-09 1:30 ` [dpdk-dev] [PATCH v2] " Simei Su
2021-09-15 5:34 ` Simei Su [this message]
2021-09-22 6:50 ` [dpdk-dev] [PATCH v3] " Zhang, Qi Z
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210915053422.319489-1-simei.su@intel.com \
--to=simei.su@intel.com \
--cc=dev@dpdk.org \
--cc=haiyue.wang@intel.com \
--cc=qi.z.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).