[dpdk-dev] [PATCH v4 1/9] dmadev: add channel status check for testing use

[Bruce Richardson <bruce.richardson@intel.com>]

Add in a function to check if a device or vchan has completed all jobs
assigned to it, without gathering in the results. This is primarily for
use in testing, to allow the hardware to be in a known-state prior to
gathering completions.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
---
 lib/dmadev/rte_dmadev.c      | 15 +++++++++++++++
 lib/dmadev/rte_dmadev.h      | 33 +++++++++++++++++++++++++++++++++
 lib/dmadev/rte_dmadev_core.h |  6 ++++++
 lib/dmadev/version.map       |  1 +
 4 files changed, 55 insertions(+)

diff --git a/lib/dmadev/rte_dmadev.c b/lib/dmadev/rte_dmadev.c
index 544937acf8..859958fff8 100644
--- a/lib/dmadev/rte_dmadev.c
+++ b/lib/dmadev/rte_dmadev.c
@@ -716,3 +716,18 @@ rte_dma_dump(int16_t dev_id, FILE *f)
 
 	return 0;
 }
+
+int
+rte_dma_vchan_status(uint16_t dev_id, uint16_t vchan, enum rte_dma_vchan_status *status)
+{
+	struct rte_dma_dev *dev = &rte_dma_devices[dev_id];
+
+	RTE_DMA_VALID_DEV_ID_OR_ERR_RET(dev_id, -EINVAL);
+	if (vchan >= dev->data->dev_conf.nb_vchans) {
+		RTE_DMA_LOG(ERR, "Device %u vchan %u out of range\n", dev_id, vchan);
+		return -EINVAL;
+	}
+
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->vchan_status, -ENOTSUP);
+	return (*dev->dev_ops->vchan_status)(dev, vchan, status);
+}
diff --git a/lib/dmadev/rte_dmadev.h b/lib/dmadev/rte_dmadev.h
index be54f2cb9d..86c4a38f83 100644
--- a/lib/dmadev/rte_dmadev.h
+++ b/lib/dmadev/rte_dmadev.h
@@ -660,6 +660,39 @@ int rte_dma_stats_get(int16_t dev_id, uint16_t vchan,
 __rte_experimental
 int rte_dma_stats_reset(int16_t dev_id, uint16_t vchan);
 
+/**
+ * device vchannel status
+ *
+ * Enum with the options for the channel status, either idle, active or halted due to error
+ */
+enum rte_dma_vchan_status {
+	RTE_DMA_VCHAN_IDLE,          /**< not processing, awaiting ops */
+	RTE_DMA_VCHAN_ACTIVE,        /**< currently processing jobs */
+	RTE_DMA_VCHAN_HALTED_ERROR,  /**< not processing due to error, cannot accept new ops */
+};
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Determine if all jobs have completed on a device channel.
+ * This function is primarily designed for testing use, as it allows a process to check if
+ * all jobs are completed, without actually gathering completions from those jobs.
+ *
+ * @param dev_id
+ *   The identifier of the device.
+ * @param vchan
+ *   The identifier of virtual DMA channel.
+ * @param[out] status
+ *   The vchan status
+ * @return
+ *   0 - call completed successfully
+ *   < 0 - error code indicating there was a problem calling the API
+ */
+__rte_experimental
+int
+rte_dma_vchan_status(uint16_t dev_id, uint16_t vchan, enum rte_dma_vchan_status *status);
+
 /**
  * @warning
  * @b EXPERIMENTAL: this API may change without prior notice.
diff --git a/lib/dmadev/rte_dmadev_core.h b/lib/dmadev/rte_dmadev_core.h
index edb3286cbb..0eec1aa43b 100644
--- a/lib/dmadev/rte_dmadev_core.h
+++ b/lib/dmadev/rte_dmadev_core.h
@@ -46,6 +46,10 @@ typedef int (*rte_dma_vchan_setup_t)(struct rte_dma_dev *dev, uint16_t vchan,
 				const struct rte_dma_vchan_conf *conf,
 				uint32_t conf_sz);
 
+/** @internal Used to check if a virtual channel has finished all jobs. */
+typedef int (*rte_dma_vchan_status_t)(const struct rte_dma_dev *dev, uint16_t vchan,
+		enum rte_dma_vchan_status *status);
+
 /** @internal Used to retrieve basic statistics. */
 typedef int (*rte_dma_stats_get_t)(const struct rte_dma_dev *dev,
 			uint16_t vchan, struct rte_dma_stats *stats,
@@ -119,6 +123,8 @@ struct rte_dma_dev_ops {
 	rte_dma_stats_reset_t    stats_reset;
 
 	rte_dma_dump_t           dev_dump;
+	rte_dma_vchan_status_t   vchan_status;
+
 };
 
 /**
diff --git a/lib/dmadev/version.map b/lib/dmadev/version.map
index c780463bb2..40ea517016 100644
--- a/lib/dmadev/version.map
+++ b/lib/dmadev/version.map
@@ -20,6 +20,7 @@ EXPERIMENTAL {
 	rte_dma_stop;
 	rte_dma_submit;
 	rte_dma_vchan_setup;
+	rte_dma_vchan_status;
 
 	local: *;
 };
-- 
2.30.2