From: Alvin Zhang <alvinx.zhang@intel.com>
To: qi.z.zhang@intel.com
Cc: dev@dpdk.org, Alvin Zhang <alvinx.zhang@intel.com>
Subject: [dpdk-dev] [PATCH v4] net/ice: add support for low Rx latency
Date: Fri, 24 Sep 2021 17:18:43 +0800 [thread overview]
Message-ID: <20210924091843.14880-1-alvinx.zhang@intel.com> (raw)
In-Reply-To: <20210924085653.17080-1-alvinx.zhang@intel.com>
This patch adds a devarg parameter to enable/disable low Rx latency.
Signed-off-by: Alvin Zhang <alvinx.zhang@intel.com>
---
v3: rebase to dpdk-next-net-intel
v4: rename arg rx-low-latency to rx_low_latency
---
doc/guides/nics/ice.rst | 12 ++++++++++++
drivers/net/ice/ice_ethdev.c | 26 +++++++++++++++++++++++---
drivers/net/ice/ice_ethdev.h | 1 +
3 files changed, 36 insertions(+), 3 deletions(-)
diff --git a/doc/guides/nics/ice.rst b/doc/guides/nics/ice.rst
index ebe2cbc..8d43488 100644
--- a/doc/guides/nics/ice.rst
+++ b/doc/guides/nics/ice.rst
@@ -227,6 +227,18 @@ Runtime Config Options
-a af:00.0,pps_out='[pin:0]'
+- ``Low Rx latency`` (default ``0``)
+
+ vRAN workloads require low latency DPDK interface for the front haul
+ interface connection to Radio. By specifying ``1`` for parameter
+ ``rx_low_latency``, each completed Rx descriptor can be written immediately
+ to host memory and the Rx interrupt latency can be reduced to 2us::
+
+ -a 0000:88:00.0,rx_low_latency=1
+
+ As a trade-off, this configuration may cause the packet processing performance
+ degradation due to the PCI bandwidth limitation.
+
Driver compilation and testing
------------------------------
diff --git a/drivers/net/ice/ice_ethdev.c b/drivers/net/ice/ice_ethdev.c
index e24a3b6..091a4a9 100644
--- a/drivers/net/ice/ice_ethdev.c
+++ b/drivers/net/ice/ice_ethdev.c
@@ -30,6 +30,7 @@
#define ICE_PROTO_XTR_ARG "proto_xtr"
#define ICE_HW_DEBUG_MASK_ARG "hw_debug_mask"
#define ICE_ONE_PPS_OUT_ARG "pps_out"
+#define ICE_RX_LOW_LATENCY "rx_low_latency"
static const char * const ice_valid_args[] = {
ICE_SAFE_MODE_SUPPORT_ARG,
@@ -37,6 +38,7 @@
ICE_PROTO_XTR_ARG,
ICE_HW_DEBUG_MASK_ARG,
ICE_ONE_PPS_OUT_ARG,
+ ICE_RX_LOW_LATENCY,
NULL
};
@@ -1956,6 +1958,9 @@ static int ice_parse_devargs(struct rte_eth_dev *dev)
if (ret)
goto bail;
+ ret = rte_kvargs_process(kvlist, ICE_RX_LOW_LATENCY,
+ &parse_bool, &ad->devargs.rx_low_latency);
+
bail:
rte_kvargs_free(kvlist);
return ret;
@@ -3272,8 +3277,9 @@ static int ice_init_rss(struct ice_pf *pf)
{
struct ice_hw *hw = ICE_VSI_TO_HW(vsi);
uint32_t val, val_tx;
- int i;
+ int rx_low_latency, i;
+ rx_low_latency = vsi->adapter->devargs.rx_low_latency;
for (i = 0; i < nb_queue; i++) {
/*do actual bind*/
val = (msix_vect & QINT_RQCTL_MSIX_INDX_M) |
@@ -3283,8 +3289,21 @@ static int ice_init_rss(struct ice_pf *pf)
PMD_DRV_LOG(INFO, "queue %d is binding to vect %d",
base_queue + i, msix_vect);
+
/* set ITR0 value */
- ICE_WRITE_REG(hw, GLINT_ITR(0, msix_vect), 0x2);
+ if (rx_low_latency) {
+ /**
+ * Empirical configuration for optimal real time
+ * latency reduced interrupt throttling to 2us
+ */
+ ICE_WRITE_REG(hw, GLINT_ITR(0, msix_vect), 0x1);
+ ICE_WRITE_REG(hw, QRX_ITR(base_queue + i),
+ QRX_ITR_NO_EXPR_M);
+ } else {
+ ICE_WRITE_REG(hw, GLINT_ITR(0, msix_vect), 0x2);
+ ICE_WRITE_REG(hw, QRX_ITR(base_queue + i), 0);
+ }
+
ICE_WRITE_REG(hw, QINT_RQCTL(base_queue + i), val);
ICE_WRITE_REG(hw, QINT_TQCTL(base_queue + i), val_tx);
}
@@ -5497,7 +5516,8 @@ static int ice_xstats_get_names(__rte_unused struct rte_eth_dev *dev,
ICE_HW_DEBUG_MASK_ARG "=0xXXX"
ICE_PROTO_XTR_ARG "=[queue:]<vlan|ipv4|ipv6|ipv6_flow|tcp|ip_offset>"
ICE_SAFE_MODE_SUPPORT_ARG "=<0|1>"
- ICE_PIPELINE_MODE_SUPPORT_ARG "=<0|1>");
+ ICE_PIPELINE_MODE_SUPPORT_ARG "=<0|1>"
+ ICE_RX_LOW_LATENCY "=<0|1>");
RTE_LOG_REGISTER_SUFFIX(ice_logtype_init, init, NOTICE);
RTE_LOG_REGISTER_SUFFIX(ice_logtype_driver, driver, NOTICE);
diff --git a/drivers/net/ice/ice_ethdev.h b/drivers/net/ice/ice_ethdev.h
index ea9d892..26f5c56 100644
--- a/drivers/net/ice/ice_ethdev.h
+++ b/drivers/net/ice/ice_ethdev.h
@@ -476,6 +476,7 @@ struct ice_pf {
* Cache devargs parse result.
*/
struct ice_devargs {
+ int rx_low_latency;
int safe_mode_support;
uint8_t proto_xtr_dflt;
int pipe_mode_support;
--
1.8.3.1
next prev parent reply other threads:[~2021-09-24 9:18 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-14 1:31 [dpdk-dev] [PATCH] net/ice: add ability to reduce the " Alvin Zhang
2021-09-16 3:07 ` Tu, Lijuan
2021-09-16 8:28 ` Zhang, AlvinX
2021-09-17 17:25 ` Kevin Traynor
2021-09-18 1:33 ` Zhang, AlvinX
2021-09-21 9:20 ` Kevin Traynor
2021-09-22 2:16 ` Zhang, AlvinX
2021-09-28 9:22 ` Kevin Traynor
2021-09-18 2:59 ` [dpdk-dev] [PATCH v2] net/ice: add support for low " Alvin Zhang
2021-09-24 8:56 ` [dpdk-dev] [PATCH v3] " Alvin Zhang
2021-09-24 9:10 ` Zhang, Qi Z
2021-09-24 9:18 ` Alvin Zhang [this message]
2021-09-24 9:34 ` [dpdk-dev] [PATCH v5] " Alvin Zhang
2021-09-24 10:53 ` Zhang, Qi Z
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210924091843.14880-1-alvinx.zhang@intel.com \
--to=alvinx.zhang@intel.com \
--cc=dev@dpdk.org \
--cc=qi.z.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).