* Re: [dpdk-dev] [PATCH] app/testpmd: add cmdline to show LACP bonding info
2021-09-22 6:24 [dpdk-dev] [PATCH] app/testpmd: add cmdline to show LACP bonding info Min Hu (Connor)
@ 2021-09-23 3:20 ` Li, Xiaoyun
2021-09-24 9:18 ` Min Hu (Connor)
2021-09-24 9:48 ` [dpdk-dev] [PATCH v2] " Min Hu (Connor)
2021-09-24 9:57 ` [dpdk-dev] [PATCH v3] " Min Hu (Connor)
2 siblings, 1 reply; 7+ messages in thread
From: Li, Xiaoyun @ 2021-09-23 3:20 UTC (permalink / raw)
To: Min Hu (Connor), dev; +Cc: Yigit, Ferruh, thomas
Hi
> -----Original Message-----
> From: dev <dev-bounces@dpdk.org> On Behalf Of Min Hu (Connor)
> Sent: Wednesday, September 22, 2021 14:25
> To: dev@dpdk.org
> Cc: Yigit, Ferruh <ferruh.yigit@intel.com>; thomas@monjalon.net
> Subject: [dpdk-dev] [PATCH] app/testpmd: add cmdline to show LACP bonding
> info
>
> From: Chengchang Tang <tangchengchang@huawei.com>
>
> Add a new cmdline to help diagnostic the bonding mode 4 in testpmd.
>
> Show the lacp information about the bonded device and its slaves:
> show bonding lacp info <bonded device port_id>
>
> Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
> Signed-off-by: Min Hu(Connor) <humin29@huawei.com>
> ---
> app/test-pmd/cmdline.c | 175 ++++++++++++++++++++
> doc/guides/testpmd_app_ug/testpmd_funcs.rst | 6 +
> 2 files changed, 181 insertions(+)
>
> diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c index
> a9efd027c3..c596690eed 100644
> --- a/app/test-pmd/cmdline.c
> +++ b/app/test-pmd/cmdline.c
> @@ -631,6 +631,9 @@ static void cmd_help_long_parsed(void *parsed_result,
> "show bonding config (port_id)\n"
> " Show the bonding config for port_id.\n\n"
>
> + "show bonding lacp info (port_id)\n"
> + " Show the bonding lacp information for
> port_id.\n\n"
> +
> "set bonding mac_addr (port_id) (address)\n"
> " Set the MAC address of a bonded device.\n\n"
>
> @@ -6107,6 +6110,177 @@ cmdline_parse_inst_t
> cmd_set_balance_xmit_policy = {
> }
> };
>
> +/* *** SHOW IEEE802.3 BONDING INFORMATION *** */ struct
> +cmd_show_bonding_lacp_info_result {
> + cmdline_fixed_string_t show;
> + cmdline_fixed_string_t bonding;
> + cmdline_fixed_string_t lacp;
> + cmdline_fixed_string_t info;
> + portid_t port_id;
> +};
> +
> +static void port_param_show(struct port_params *params) {
> + char buf[RTE_ETHER_ADDR_FMT_SIZE];
> +
> + printf("\t\tsystem priority: %u\n", params->system_priority);
> + rte_ether_format_addr(buf, RTE_ETHER_ADDR_FMT_SIZE, ¶ms-
> >system);
> + printf("\t\tsystem mac address: %s\n", buf);
> + printf("\t\tport key: %u\n", params->key);
> + printf("\t\tport priority: %u\n", params->port_priority);
> + printf("\t\tport number: %u\n", params->port_number); }
> +
> +static void lacp_slave_info_show(struct rte_eth_bond_8023ad_slave_info
> +*info) {
> + char a_state[256] = { 0 };
> + char p_state[256] = { 0 };
> + int a_len = 0;
> + int p_len = 0;
> + uint32_t i;
> +
> + static const char * const state[] = {
> + "ACT", "TIMEOUT", "AGG", "SYNC", "COL", "DIST", "DEF", "EXP"
> + };
> + static const char * const selection[] = {
> + "UNSELECTED", "STANDBY", "SELECTED"
> + };
> +
> + for (i = 0; i < RTE_DIM(state); i++) {
> + if ((info->actor_state >> i) & 1) {
> + a_len += snprintf(&a_state[a_len],
> + RTE_DIM(a_state) - a_len, "%s
> ",
> + state[i]);
> + }
You can remove {} since it's only one sentence.
> +
> + if ((info->partner_state >> i) & 1) {
> + p_len += snprintf(&p_state[p_len],
> + RTE_DIM(p_state) - p_len, "%s
> ",
> + state[i]);
> + }
Same as above
> + }
Also, I understand you want to make it more generic. But it looks not straightforward and hard to read. (People who first touch bonding may not understand which state you're referring to)
What about abstracting a function state_to_str(state):
state_to_str(state){
switch(state)
case STATE_LACP_ACTIVE: return "active";
case ...
}
This is just a suggestion. And it only works with one state not several states co-exist. But I'm sure you can do similar things. My point is only showing "STATE_LACP_ACTIVE" will be better.
I'm not familiar with bonding, will it only have one state? If not, your print will look like "ACTTIMEOUTAGG"?
> + printf("\tAggregator port id: %u\n", info->agg_port_id);
> + printf("\tselection: %s\n", selection[info->selected]);
> + printf("\tActor detail info:\n");
> + port_param_show(&info->actor);
> + printf("\t\tport state: %s\n", a_state);
> + printf("\tPartner detail info:\n");
> + port_param_show(&info->partner);
> + printf("\t\tport state: %s\n", p_state);
> + printf("\n");
> +}
> +
> +static void lacp_conf_show(struct rte_eth_bond_8023ad_conf *conf) {
> + printf("\tfast period: %u ms\n", conf->fast_periodic_ms);
> + printf("\tslow period: %u ms\n", conf->slow_periodic_ms);
> + printf("\tshort timeout: %u ms\n", conf->short_timeout_ms);
> + printf("\tlong timeout: %u ms\n", conf->long_timeout_ms);
> + printf("\taggregate wait timeout: %u ms\n",
> + conf->aggregate_wait_timeout_ms);
> + printf("\ttx period: %u ms\n", conf->tx_period_ms);
> + printf("\trx marker period: %u ms\n", conf->rx_marker_period_ms);
> + printf("\tupdate timeout: %u ms\n", conf->update_timeout_ms);
> + switch (conf->agg_selection) {
> + case AGG_BANDWIDTH:
> + printf("\taggregation mode: bandwidth\n");
> + break;
> + case AGG_STABLE:
> + printf("\taggregation mode: stable\n");
> + break;
> + case AGG_COUNT:
> + printf("\taggregation mode: count\n");
> + break;
> + default:
> + printf("\taggregation mode: invalid\n");
> + break;
> + }
> +
> + printf("\n");
> +}
> +
> +static void cmd_show_bonding_lacp_info_parsed(void *parsed_result,
> + __rte_unused struct cmdline *cl,
> + __rte_unused void *data)
> +{
> + struct cmd_show_bonding_lacp_info_result *res = parsed_result;
> + struct rte_eth_bond_8023ad_slave_info slave_info;
> + struct rte_eth_bond_8023ad_conf port_conf;
> + portid_t slaves[RTE_MAX_ETHPORTS];
> + portid_t port_id = res->port_id;
> + int num_active_slaves;
> + int bonding_mode;
> + int i;
> + int ret;
> +
> + bonding_mode = rte_eth_bond_mode_get(port_id);
> + if (bonding_mode != BONDING_MODE_8023AD) {
Please follow the format to use fprintf(stderr, "err message") for all err messages print. You can refer to other print in cmdline.c
> + printf("\tBonding mode is not mode 4\n");
> + return;
> + }
> +
> + num_active_slaves = rte_eth_bond_active_slaves_get(port_id, slaves,
> + RTE_MAX_ETHPORTS);
> + if (num_active_slaves < 0) {
> + printf("\tFailed to get active slave list for port = %u\n",
> + port_id);
Same as above.
> + return;
> + }
> + if (num_active_slaves == 0)
> + printf("\tIEEE802.3 port %u has no active slave\n", port_id);
Same as above.
> +
> + printf("\tIEEE802.3 port: %u\n", port_id);
> + ret = rte_eth_bond_8023ad_conf_get(port_id, &port_conf);
> + if (ret) {
> + printf("\tGet bonded device %u info failed\n", port_id);
Same as above.
> + return;
> + }
> + lacp_conf_show(&port_conf);
> +
> + for (i = 0; i < num_active_slaves; i++) {
> + ret = rte_eth_bond_8023ad_slave_info(port_id, slaves[i],
> + &slave_info);
> + if (ret) {
> + printf("\tGet slave device %u info failed\n",
> + slaves[i]);
Same as above.
> + return;
> + }
> + printf("\tSlave Port: %u\n", slaves[i]);
> + lacp_slave_info_show(&slave_info);
> + }
> +}
> +
> +cmdline_parse_token_string_t cmd_show_bonding_lacp_info_show =
> +TOKEN_STRING_INITIALIZER(struct cmd_show_bonding_lacp_info_result,
> + show, "show");
> +cmdline_parse_token_string_t cmd_show_bonding_lacp_info_bonding =
> +TOKEN_STRING_INITIALIZER(struct cmd_show_bonding_lacp_info_result,
> + bonding, "bonding");
> +cmdline_parse_token_string_t cmd_show_bonding_lacp_info_lacp =
> +TOKEN_STRING_INITIALIZER(struct cmd_show_bonding_lacp_info_result,
> + bonding, "lacp");
> +cmdline_parse_token_string_t cmd_show_bonding_lacp_info_info =
> +TOKEN_STRING_INITIALIZER(struct cmd_show_bonding_lacp_info_result,
> + info, "info");
> +cmdline_parse_token_num_t cmd_show_bonding_lacp_info_port_id =
> +TOKEN_NUM_INITIALIZER(struct cmd_show_bonding_lacp_info_result,
> + port_id, RTE_UINT16);
> +
> +cmdline_parse_inst_t cmd_show_bonding_lacp_info = {
> + .f = cmd_show_bonding_lacp_info_parsed,
> + .help_str = "show bonding lacp info <port_id> : "
> + "Show bonding IEEE802.3 information for port_id",
> + .data = NULL,
> + .tokens = {
> + (void *)&cmd_show_bonding_lacp_info_show,
> + (void *)&cmd_show_bonding_lacp_info_bonding,
> + (void *)&cmd_show_bonding_lacp_info_lacp,
> + (void *)&cmd_show_bonding_lacp_info_info,
> + (void *)&cmd_show_bonding_lacp_info_port_id,
> + NULL
> + }
> +};
> +
> /* *** SHOW NIC BONDING CONFIGURATION *** */ struct
> cmd_show_bonding_config_result {
> cmdline_fixed_string_t show;
> @@ -17589,6 +17763,7 @@ cmdline_parse_ctx_t main_ctx[] = { #ifdef
> RTE_NET_BOND
> (cmdline_parse_inst_t *) &cmd_set_bonding_mode,
> (cmdline_parse_inst_t *) &cmd_show_bonding_config,
> + (cmdline_parse_inst_t *) &cmd_show_bonding_lacp_info,
> (cmdline_parse_inst_t *) &cmd_set_bonding_primary,
> (cmdline_parse_inst_t *) &cmd_add_bonding_slave,
> (cmdline_parse_inst_t *) &cmd_remove_bonding_slave, diff --git
> a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> index 4f8751be1c..8e64f09c11 100644
> --- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> +++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> @@ -2630,6 +2630,12 @@ in balance mode with a transmission policy of layer
> 2+3::
> Active Slaves (3): [1 3 4]
> Primary: [3]
>
> +show bonding lacp info
> +~~~~~~~~~~~~~~~~~~~~~~
> +
> +Show information about the Link Bonding device in mode 4 (link-aggregation-
> 802.3ad)::
> +
> + testpmd> show bonding lacp info (port_id)
>
> Register Functions
> ------------------
> --
> 2.33.0
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: [dpdk-dev] [PATCH] app/testpmd: add cmdline to show LACP bonding info
2021-09-23 3:20 ` Li, Xiaoyun
@ 2021-09-24 9:18 ` Min Hu (Connor)
0 siblings, 0 replies; 7+ messages in thread
From: Min Hu (Connor) @ 2021-09-24 9:18 UTC (permalink / raw)
To: Li, Xiaoyun, dev; +Cc: Yigit, Ferruh, thomas
Hi,
在 2021/9/23 11:20, Li, Xiaoyun 写道:
> Hi
>
>> -----Original Message-----
>> From: dev <dev-bounces@dpdk.org> On Behalf Of Min Hu (Connor)
>> Sent: Wednesday, September 22, 2021 14:25
>> To: dev@dpdk.org
>> Cc: Yigit, Ferruh <ferruh.yigit@intel.com>; thomas@monjalon.net
>> Subject: [dpdk-dev] [PATCH] app/testpmd: add cmdline to show LACP bonding
>> info
>>
>> From: Chengchang Tang <tangchengchang@huawei.com>
>>
>> Add a new cmdline to help diagnostic the bonding mode 4 in testpmd.
>>
>> Show the lacp information about the bonded device and its slaves:
>> show bonding lacp info <bonded device port_id>
>>
>> Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
>> Signed-off-by: Min Hu(Connor) <humin29@huawei.com>
>> ---
>> app/test-pmd/cmdline.c | 175 ++++++++++++++++++++
>> doc/guides/testpmd_app_ug/testpmd_funcs.rst | 6 +
>> 2 files changed, 181 insertions(+)
>>
>> diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c index
>> a9efd027c3..c596690eed 100644
>> --- a/app/test-pmd/cmdline.c
>> +++ b/app/test-pmd/cmdline.c
>> @@ -631,6 +631,9 @@ static void cmd_help_long_parsed(void *parsed_result,
>> "show bonding config (port_id)\n"
>> " Show the bonding config for port_id.\n\n"
>>
>> + "show bonding lacp info (port_id)\n"
>> + " Show the bonding lacp information for
>> port_id.\n\n"
>> +
>> "set bonding mac_addr (port_id) (address)\n"
>> " Set the MAC address of a bonded device.\n\n"
>>
>> @@ -6107,6 +6110,177 @@ cmdline_parse_inst_t
>> cmd_set_balance_xmit_policy = {
>> }
>> };
>>
>> +/* *** SHOW IEEE802.3 BONDING INFORMATION *** */ struct
>> +cmd_show_bonding_lacp_info_result {
>> + cmdline_fixed_string_t show;
>> + cmdline_fixed_string_t bonding;
>> + cmdline_fixed_string_t lacp;
>> + cmdline_fixed_string_t info;
>> + portid_t port_id;
>> +};
>> +
>> +static void port_param_show(struct port_params *params) {
>> + char buf[RTE_ETHER_ADDR_FMT_SIZE];
>> +
>> + printf("\t\tsystem priority: %u\n", params->system_priority);
>> + rte_ether_format_addr(buf, RTE_ETHER_ADDR_FMT_SIZE, ¶ms-
>>> system);
>> + printf("\t\tsystem mac address: %s\n", buf);
>> + printf("\t\tport key: %u\n", params->key);
>> + printf("\t\tport priority: %u\n", params->port_priority);
>> + printf("\t\tport number: %u\n", params->port_number); }
>> +
>> +static void lacp_slave_info_show(struct rte_eth_bond_8023ad_slave_info
>> +*info) {
>> + char a_state[256] = { 0 };
>> + char p_state[256] = { 0 };
>> + int a_len = 0;
>> + int p_len = 0;
>> + uint32_t i;
>> +
>> + static const char * const state[] = {
>> + "ACT", "TIMEOUT", "AGG", "SYNC", "COL", "DIST", "DEF", "EXP"
>> + };
>> + static const char * const selection[] = {
>> + "UNSELECTED", "STANDBY", "SELECTED"
>> + };
>> +
>> + for (i = 0; i < RTE_DIM(state); i++) {
>> + if ((info->actor_state >> i) & 1) {
>> + a_len += snprintf(&a_state[a_len],
>> + RTE_DIM(a_state) - a_len, "%s
>> ",
>> + state[i]);
>> + }
>
> You can remove {} since it's only one sentence.
fixed in v2.
>> +
>> + if ((info->partner_state >> i) & 1) {
>> + p_len += snprintf(&p_state[p_len],
>> + RTE_DIM(p_state) - p_len, "%s
>> ",
>> + state[i]);
>> + }
>
> Same as above
>> + }
>
> Also, I understand you want to make it more generic. But it looks not straightforward and hard to read. (People who first touch bonding may not understand which state you're referring to)
> What about abstracting a function state_to_str(state):
> state_to_str(state){
> switch(state)
> case STATE_LACP_ACTIVE: return "active";
> case ...
> }
> This is just a suggestion. And it only works with one state not several states co-exist. But I'm sure you can do similar things. My point is only showing "STATE_LACP_ACTIVE" will be better.
>
> I'm not familiar with bonding, will it only have one state? If not, your print will look like "ACTTIMEOUTAGG"?
It has more one state, But it will not look like "ACTTIMEOUTAGG",
because I add space between them.
BTW, I will make state more readable, change these strings
"ACT", "TIMEOUT", "AGG", "SYNC", "COL", "DIST", "DEF", "EXP"
to
"ACTIVE",
"TIMEOUT",
"AGGREGATION",
"SYNCHRONIZATION",
"COLLECTING",
"DISTRIBUTING",
"DEFAULTED",
"EXPIRED"
>
>> + printf("\tAggregator port id: %u\n", info->agg_port_id);
>> + printf("\tselection: %s\n", selection[info->selected]);
>> + printf("\tActor detail info:\n");
>> + port_param_show(&info->actor);
>> + printf("\t\tport state: %s\n", a_state);
>> + printf("\tPartner detail info:\n");
>> + port_param_show(&info->partner);
>> + printf("\t\tport state: %s\n", p_state);
>> + printf("\n");
>> +}
>> +
>> +static void lacp_conf_show(struct rte_eth_bond_8023ad_conf *conf) {
>> + printf("\tfast period: %u ms\n", conf->fast_periodic_ms);
>> + printf("\tslow period: %u ms\n", conf->slow_periodic_ms);
>> + printf("\tshort timeout: %u ms\n", conf->short_timeout_ms);
>> + printf("\tlong timeout: %u ms\n", conf->long_timeout_ms);
>> + printf("\taggregate wait timeout: %u ms\n",
>> + conf->aggregate_wait_timeout_ms);
>> + printf("\ttx period: %u ms\n", conf->tx_period_ms);
>> + printf("\trx marker period: %u ms\n", conf->rx_marker_period_ms);
>> + printf("\tupdate timeout: %u ms\n", conf->update_timeout_ms);
>> + switch (conf->agg_selection) {
>> + case AGG_BANDWIDTH:
>> + printf("\taggregation mode: bandwidth\n");
>> + break;
>> + case AGG_STABLE:
>> + printf("\taggregation mode: stable\n");
>> + break;
>> + case AGG_COUNT:
>> + printf("\taggregation mode: count\n");
>> + break;
>> + default:
>> + printf("\taggregation mode: invalid\n");
>> + break;
>> + }
>> +
>> + printf("\n");
>> +}
>> +
>> +static void cmd_show_bonding_lacp_info_parsed(void *parsed_result,
>> + __rte_unused struct cmdline *cl,
>> + __rte_unused void *data)
>> +{
>> + struct cmd_show_bonding_lacp_info_result *res = parsed_result;
>> + struct rte_eth_bond_8023ad_slave_info slave_info;
>> + struct rte_eth_bond_8023ad_conf port_conf;
>> + portid_t slaves[RTE_MAX_ETHPORTS];
>> + portid_t port_id = res->port_id;
>> + int num_active_slaves;
>> + int bonding_mode;
>> + int i;
>> + int ret;
>> +
>> + bonding_mode = rte_eth_bond_mode_get(port_id);
>> + if (bonding_mode != BONDING_MODE_8023AD) {
>
> Please follow the format to use fprintf(stderr, "err message") for all err messages print. You can refer to other print in cmdline.c
be fixed in v2.
thanks.
>
>> + printf("\tBonding mode is not mode 4\n");
>> + return;
>> + }
>> +
>> + num_active_slaves = rte_eth_bond_active_slaves_get(port_id, slaves,
>> + RTE_MAX_ETHPORTS);
>> + if (num_active_slaves < 0) {
>> + printf("\tFailed to get active slave list for port = %u\n",
>> + port_id);
>
> Same as above.
>
>> + return;
>> + }
>> + if (num_active_slaves == 0)
>> + printf("\tIEEE802.3 port %u has no active slave\n", port_id);
>
> Same as above.
>
>> +
>> + printf("\tIEEE802.3 port: %u\n", port_id);
>> + ret = rte_eth_bond_8023ad_conf_get(port_id, &port_conf);
>> + if (ret) {
>> + printf("\tGet bonded device %u info failed\n", port_id);
>
> Same as above.
>> + return;
>> + }
>> + lacp_conf_show(&port_conf);
>> +
>> + for (i = 0; i < num_active_slaves; i++) {
>> + ret = rte_eth_bond_8023ad_slave_info(port_id, slaves[i],
>> + &slave_info);
>> + if (ret) {
>> + printf("\tGet slave device %u info failed\n",
>> + slaves[i]);
>
> Same as above.
>> + return;
>> + }
>> + printf("\tSlave Port: %u\n", slaves[i]);
>> + lacp_slave_info_show(&slave_info);
>> + }
>> +}
>> +
>> +cmdline_parse_token_string_t cmd_show_bonding_lacp_info_show =
>> +TOKEN_STRING_INITIALIZER(struct cmd_show_bonding_lacp_info_result,
>> + show, "show");
>> +cmdline_parse_token_string_t cmd_show_bonding_lacp_info_bonding =
>> +TOKEN_STRING_INITIALIZER(struct cmd_show_bonding_lacp_info_result,
>> + bonding, "bonding");
>> +cmdline_parse_token_string_t cmd_show_bonding_lacp_info_lacp =
>> +TOKEN_STRING_INITIALIZER(struct cmd_show_bonding_lacp_info_result,
>> + bonding, "lacp");
>> +cmdline_parse_token_string_t cmd_show_bonding_lacp_info_info =
>> +TOKEN_STRING_INITIALIZER(struct cmd_show_bonding_lacp_info_result,
>> + info, "info");
>> +cmdline_parse_token_num_t cmd_show_bonding_lacp_info_port_id =
>> +TOKEN_NUM_INITIALIZER(struct cmd_show_bonding_lacp_info_result,
>> + port_id, RTE_UINT16);
>> +
>> +cmdline_parse_inst_t cmd_show_bonding_lacp_info = {
>> + .f = cmd_show_bonding_lacp_info_parsed,
>> + .help_str = "show bonding lacp info <port_id> : "
>> + "Show bonding IEEE802.3 information for port_id",
>> + .data = NULL,
>> + .tokens = {
>> + (void *)&cmd_show_bonding_lacp_info_show,
>> + (void *)&cmd_show_bonding_lacp_info_bonding,
>> + (void *)&cmd_show_bonding_lacp_info_lacp,
>> + (void *)&cmd_show_bonding_lacp_info_info,
>> + (void *)&cmd_show_bonding_lacp_info_port_id,
>> + NULL
>> + }
>> +};
>> +
>> /* *** SHOW NIC BONDING CONFIGURATION *** */ struct
>> cmd_show_bonding_config_result {
>> cmdline_fixed_string_t show;
>> @@ -17589,6 +17763,7 @@ cmdline_parse_ctx_t main_ctx[] = { #ifdef
>> RTE_NET_BOND
>> (cmdline_parse_inst_t *) &cmd_set_bonding_mode,
>> (cmdline_parse_inst_t *) &cmd_show_bonding_config,
>> + (cmdline_parse_inst_t *) &cmd_show_bonding_lacp_info,
>> (cmdline_parse_inst_t *) &cmd_set_bonding_primary,
>> (cmdline_parse_inst_t *) &cmd_add_bonding_slave,
>> (cmdline_parse_inst_t *) &cmd_remove_bonding_slave, diff --git
>> a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
>> b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
>> index 4f8751be1c..8e64f09c11 100644
>> --- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
>> +++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
>> @@ -2630,6 +2630,12 @@ in balance mode with a transmission policy of layer
>> 2+3::
>> Active Slaves (3): [1 3 4]
>> Primary: [3]
>>
>> +show bonding lacp info
>> +~~~~~~~~~~~~~~~~~~~~~~
>> +
>> +Show information about the Link Bonding device in mode 4 (link-aggregation-
>> 802.3ad)::
>> +
>> + testpmd> show bonding lacp info (port_id)
>>
>> Register Functions
>> ------------------
>> --
>> 2.33.0
>
> .
>
^ permalink raw reply [flat|nested] 7+ messages in thread
* [dpdk-dev] [PATCH v2] app/testpmd: add cmdline to show LACP bonding info
2021-09-22 6:24 [dpdk-dev] [PATCH] app/testpmd: add cmdline to show LACP bonding info Min Hu (Connor)
2021-09-23 3:20 ` Li, Xiaoyun
@ 2021-09-24 9:48 ` Min Hu (Connor)
2021-09-24 9:57 ` [dpdk-dev] [PATCH v3] " Min Hu (Connor)
2 siblings, 0 replies; 7+ messages in thread
From: Min Hu (Connor) @ 2021-09-24 9:48 UTC (permalink / raw)
To: dev; +Cc: ferruh.yigit, xiaoyun.li
From: Chengchang Tang <tangchengchang@huawei.com>
Add a new cmdline to help diagnostic the bonding mode 4 in testpmd.
Show the lacp information about the bonded device and its slaves:
show bonding lacp info <bonded device port_id>
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Min Hu(Connor) <humin29@huawei.com>
---
app/test-pmd/cmdline.c | 175 ++++++++++++++++++++
doc/guides/testpmd_app_ug/testpmd_funcs.rst | 6 +
2 files changed, 181 insertions(+)
diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
index a9efd027c3..200909e7e7 100644
--- a/app/test-pmd/cmdline.c
+++ b/app/test-pmd/cmdline.c
@@ -631,6 +631,9 @@ static void cmd_help_long_parsed(void *parsed_result,
"show bonding config (port_id)\n"
" Show the bonding config for port_id.\n\n"
+ "show bonding lacp info (port_id)\n"
+ " Show the bonding lacp information for port_id.\n\n"
+
"set bonding mac_addr (port_id) (address)\n"
" Set the MAC address of a bonded device.\n\n"
@@ -6107,6 +6110,177 @@ cmdline_parse_inst_t cmd_set_balance_xmit_policy = {
}
};
+/* *** SHOW IEEE802.3 BONDING INFORMATION *** */
+struct cmd_show_bonding_lacp_info_result {
+ cmdline_fixed_string_t show;
+ cmdline_fixed_string_t bonding;
+ cmdline_fixed_string_t lacp;
+ cmdline_fixed_string_t info;
+ portid_t port_id;
+};
+
+static void port_param_show(struct port_params *params)
+{
+ char buf[RTE_ETHER_ADDR_FMT_SIZE];
+
+ printf("\t\tsystem priority: %u\n", params->system_priority);
+ rte_ether_format_addr(buf, RTE_ETHER_ADDR_FMT_SIZE, ¶ms->system);
+ printf("\t\tsystem mac address: %s\n", buf);
+ printf("\t\tport key: %u\n", params->key);
+ printf("\t\tport priority: %u\n", params->port_priority);
+ printf("\t\tport number: %u\n", params->port_number);
+}
+
+static void lacp_slave_info_show(struct rte_eth_bond_8023ad_slave_info *info)
+{
+ char a_state[256] = { 0 };
+ char p_state[256] = { 0 };
+ int a_len = 0;
+ int p_len = 0;
+ uint32_t i;
+
+ static const char * const state[] = {
+ "ACT", "TIMEOUT", "AGG", "SYNC", "COL", "DIST", "DEF", "EXP"
+ };
+ static const char * const selection[] = {
+ "UNSELECTED", "STANDBY", "SELECTED"
+ };
+
+ for (i = 0; i < RTE_DIM(state); i++) {
+ if ((info->actor_state >> i) & 1) {
+ a_len += snprintf(&a_state[a_len],
+ RTE_DIM(a_state) - a_len, "%s ",
+ state[i]);
+ }
+
+ if ((info->partner_state >> i) & 1) {
+ p_len += snprintf(&p_state[p_len],
+ RTE_DIM(p_state) - p_len, "%s ",
+ state[i]);
+ }
+ }
+ printf("\tAggregator port id: %u\n", info->agg_port_id);
+ printf("\tselection: %s\n", selection[info->selected]);
+ printf("\tActor detail info:\n");
+ port_param_show(&info->actor);
+ printf("\t\tport state: %s\n", a_state);
+ printf("\tPartner detail info:\n");
+ port_param_show(&info->partner);
+ printf("\t\tport state: %s\n", p_state);
+ printf("\n");
+}
+
+static void lacp_conf_show(struct rte_eth_bond_8023ad_conf *conf)
+{
+ printf("\tfast period: %u ms\n", conf->fast_periodic_ms);
+ printf("\tslow period: %u ms\n", conf->slow_periodic_ms);
+ printf("\tshort timeout: %u ms\n", conf->short_timeout_ms);
+ printf("\tlong timeout: %u ms\n", conf->long_timeout_ms);
+ printf("\taggregate wait timeout: %u ms\n",
+ conf->aggregate_wait_timeout_ms);
+ printf("\ttx period: %u ms\n", conf->tx_period_ms);
+ printf("\trx marker period: %u ms\n", conf->rx_marker_period_ms);
+ printf("\tupdate timeout: %u ms\n", conf->update_timeout_ms);
+ switch (conf->agg_selection) {
+ case AGG_BANDWIDTH:
+ printf("\taggregation mode: bandwidth\n");
+ break;
+ case AGG_STABLE:
+ printf("\taggregation mode: stable\n");
+ break;
+ case AGG_COUNT:
+ printf("\taggregation mode: count\n");
+ break;
+ default:
+ printf("\taggregation mode: invalid\n");
+ break;
+ }
+
+ printf("\n");
+}
+
+static void cmd_show_bonding_lacp_info_parsed(void *parsed_result,
+ __rte_unused struct cmdline *cl,
+ __rte_unused void *data)
+{
+ struct cmd_show_bonding_lacp_info_result *res = parsed_result;
+ struct rte_eth_bond_8023ad_slave_info slave_info;
+ struct rte_eth_bond_8023ad_conf port_conf;
+ portid_t slaves[RTE_MAX_ETHPORTS];
+ portid_t port_id = res->port_id;
+ int num_active_slaves;
+ int bonding_mode;
+ int i;
+ int ret;
+
+ bonding_mode = rte_eth_bond_mode_get(port_id);
+ if (bonding_mode != BONDING_MODE_8023AD) {
+ printf("\tBonding mode is not mode 4\n");
+ return;
+ }
+
+ num_active_slaves = rte_eth_bond_active_slaves_get(port_id, slaves,
+ RTE_MAX_ETHPORTS);
+ if (num_active_slaves < 0) {
+ printf("\tFailed to get active slave list for port = %u\n",
+ port_id);
+ return;
+ }
+ if (num_active_slaves == 0)
+ printf("\tIEEE802.3 port %u has no active slave\n", port_id);
+
+ printf("\tIEEE802.3 port: %u\n", port_id);
+ ret = rte_eth_bond_8023ad_conf_get(port_id, &port_conf);
+ if (ret) {
+ printf("\tGet bonded device %u info failed\n", port_id);
+ return;
+ }
+ lacp_conf_show(&port_conf);
+
+ for (i = 0; i < num_active_slaves; i++) {
+ ret = rte_eth_bond_8023ad_slave_info(port_id, slaves[i],
+ &slave_info);
+ if (ret) {
+ printf("\tGet slave device %u info failed\n",
+ slaves[i]);
+ return;
+ }
+ printf("\tSlave Port: %u\n", slaves[i]);
+ lacp_slave_info_show(&slave_info);
+ }
+}
+
+cmdline_parse_token_string_t cmd_show_bonding_lacp_info_show =
+TOKEN_STRING_INITIALIZER(struct cmd_show_bonding_lacp_info_result,
+ show, "show");
+cmdline_parse_token_string_t cmd_show_bonding_lacp_info_bonding =
+TOKEN_STRING_INITIALIZER(struct cmd_show_bonding_lacp_info_result,
+ bonding, "bonding");
+cmdline_parse_token_string_t cmd_show_bonding_lacp_info_lacp =
+TOKEN_STRING_INITIALIZER(struct cmd_show_bonding_lacp_info_result,
+ bonding, "lacp");
+cmdline_parse_token_string_t cmd_show_bonding_lacp_info_info =
+TOKEN_STRING_INITIALIZER(struct cmd_show_bonding_lacp_info_result,
+ info, "info");
+cmdline_parse_token_num_t cmd_show_bonding_lacp_info_port_id =
+TOKEN_NUM_INITIALIZER(struct cmd_show_bonding_lacp_info_result,
+ port_id, RTE_UINT16);
+
+cmdline_parse_inst_t cmd_show_bonding_lacp_info = {
+ .f = cmd_show_bonding_lacp_info_parsed,
+ .help_str = "show bonding lacp info <port_id> : "
+ "Show bonding IEEE802.3 information for port_id",
+ .data = NULL,
+ .tokens = {
+ (void *)&cmd_show_bonding_lacp_info_show,
+ (void *)&cmd_show_bonding_lacp_info_bonding,
+ (void *)&cmd_show_bonding_lacp_info_lacp,
+ (void *)&cmd_show_bonding_lacp_info_info,
+ (void *)&cmd_show_bonding_lacp_info_port_id,
+ NULL
+ }
+};
+
/* *** SHOW NIC BONDING CONFIGURATION *** */
struct cmd_show_bonding_config_result {
cmdline_fixed_string_t show;
@@ -17589,6 +17763,7 @@ cmdline_parse_ctx_t main_ctx[] = {
#ifdef RTE_NET_BOND
(cmdline_parse_inst_t *) &cmd_set_bonding_mode,
(cmdline_parse_inst_t *) &cmd_show_bonding_config,
+ (cmdline_parse_inst_t *) &cmd_show_bonding_lacp_info,
(cmdline_parse_inst_t *) &cmd_set_bonding_primary,
(cmdline_parse_inst_t *) &cmd_add_bonding_slave,
(cmdline_parse_inst_t *) &cmd_remove_bonding_slave,
diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index 4f8751be1c..8e64f09c11 100644
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -2630,6 +2630,12 @@ in balance mode with a transmission policy of layer 2+3::
Active Slaves (3): [1 3 4]
Primary: [3]
+show bonding lacp info
+~~~~~~~~~~~~~~~~~~~~~~
+
+Show information about the Link Bonding device in mode 4 (link-aggregation-802.3ad)::
+
+ testpmd> show bonding lacp info (port_id)
Register Functions
------------------
--
2.33.0
^ permalink raw reply [flat|nested] 7+ messages in thread* [dpdk-dev] [PATCH v3] app/testpmd: add cmdline to show LACP bonding info
2021-09-22 6:24 [dpdk-dev] [PATCH] app/testpmd: add cmdline to show LACP bonding info Min Hu (Connor)
2021-09-23 3:20 ` Li, Xiaoyun
2021-09-24 9:48 ` [dpdk-dev] [PATCH v2] " Min Hu (Connor)
@ 2021-09-24 9:57 ` Min Hu (Connor)
2021-10-11 8:17 ` Li, Xiaoyun
2 siblings, 1 reply; 7+ messages in thread
From: Min Hu (Connor) @ 2021-09-24 9:57 UTC (permalink / raw)
To: dev; +Cc: ferruh.yigit, xiaoyun.li
From: Chengchang Tang <tangchengchang@huawei.com>
Add a new cmdline to help diagnostic the bonding mode 4 in testpmd.
Show the lacp information about the bonded device and its slaves:
show bonding lacp info <bonded device port_id>
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Min Hu(Connor) <humin29@huawei.com>
---
v3:
* fix state show.
v2:
* same patch with v1.
---
app/test-pmd/cmdline.c | 184 ++++++++++++++++++++
doc/guides/testpmd_app_ug/testpmd_funcs.rst | 6 +
2 files changed, 190 insertions(+)
diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
index a9efd027c3..3eebcf30c2 100644
--- a/app/test-pmd/cmdline.c
+++ b/app/test-pmd/cmdline.c
@@ -631,6 +631,9 @@ static void cmd_help_long_parsed(void *parsed_result,
"show bonding config (port_id)\n"
" Show the bonding config for port_id.\n\n"
+ "show bonding lacp info (port_id)\n"
+ " Show the bonding lacp information for port_id.\n\n"
+
"set bonding mac_addr (port_id) (address)\n"
" Set the MAC address of a bonded device.\n\n"
@@ -6107,6 +6110,186 @@ cmdline_parse_inst_t cmd_set_balance_xmit_policy = {
}
};
+/* *** SHOW IEEE802.3 BONDING INFORMATION *** */
+struct cmd_show_bonding_lacp_info_result {
+ cmdline_fixed_string_t show;
+ cmdline_fixed_string_t bonding;
+ cmdline_fixed_string_t lacp;
+ cmdline_fixed_string_t info;
+ portid_t port_id;
+};
+
+static void port_param_show(struct port_params *params)
+{
+ char buf[RTE_ETHER_ADDR_FMT_SIZE];
+
+ printf("\t\tsystem priority: %u\n", params->system_priority);
+ rte_ether_format_addr(buf, RTE_ETHER_ADDR_FMT_SIZE, ¶ms->system);
+ printf("\t\tsystem mac address: %s\n", buf);
+ printf("\t\tport key: %u\n", params->key);
+ printf("\t\tport priority: %u\n", params->port_priority);
+ printf("\t\tport number: %u\n", params->port_number);
+}
+
+static void lacp_slave_info_show(struct rte_eth_bond_8023ad_slave_info *info)
+{
+ char a_state[256] = { 0 };
+ char p_state[256] = { 0 };
+ int a_len = 0;
+ int p_len = 0;
+ uint32_t i;
+
+ static const char * const state[] = {
+ "ACTIVE",
+ "TIMEOUT",
+ "AGGREGATION",
+ "SYNCHRONIZATION",
+ "COLLECTING",
+ "DISTRIBUTING",
+ "DEFAULTED",
+ "EXPIRED"
+ };
+ static const char * const selection[] = {
+ "UNSELECTED",
+ "STANDBY",
+ "SELECTED"
+ };
+
+ for (i = 0; i < RTE_DIM(state); i++) {
+ if ((info->actor_state >> i) & 1)
+ a_len += snprintf(&a_state[a_len],
+ RTE_DIM(a_state) - a_len, "%s ",
+ state[i]);
+
+ if ((info->partner_state >> i) & 1)
+ p_len += snprintf(&p_state[p_len],
+ RTE_DIM(p_state) - p_len, "%s ",
+ state[i]);
+ }
+ printf("\tAggregator port id: %u\n", info->agg_port_id);
+ printf("\tselection: %s\n", selection[info->selected]);
+ printf("\tActor detail info:\n");
+ port_param_show(&info->actor);
+ printf("\t\tport state: %s\n", a_state);
+ printf("\tPartner detail info:\n");
+ port_param_show(&info->partner);
+ printf("\t\tport state: %s\n", p_state);
+ printf("\n");
+}
+
+static void lacp_conf_show(struct rte_eth_bond_8023ad_conf *conf)
+{
+ printf("\tfast period: %u ms\n", conf->fast_periodic_ms);
+ printf("\tslow period: %u ms\n", conf->slow_periodic_ms);
+ printf("\tshort timeout: %u ms\n", conf->short_timeout_ms);
+ printf("\tlong timeout: %u ms\n", conf->long_timeout_ms);
+ printf("\taggregate wait timeout: %u ms\n",
+ conf->aggregate_wait_timeout_ms);
+ printf("\ttx period: %u ms\n", conf->tx_period_ms);
+ printf("\trx marker period: %u ms\n", conf->rx_marker_period_ms);
+ printf("\tupdate timeout: %u ms\n", conf->update_timeout_ms);
+ switch (conf->agg_selection) {
+ case AGG_BANDWIDTH:
+ printf("\taggregation mode: bandwidth\n");
+ break;
+ case AGG_STABLE:
+ printf("\taggregation mode: stable\n");
+ break;
+ case AGG_COUNT:
+ printf("\taggregation mode: count\n");
+ break;
+ default:
+ printf("\taggregation mode: invalid\n");
+ break;
+ }
+
+ printf("\n");
+}
+
+static void cmd_show_bonding_lacp_info_parsed(void *parsed_result,
+ __rte_unused struct cmdline *cl,
+ __rte_unused void *data)
+{
+ struct cmd_show_bonding_lacp_info_result *res = parsed_result;
+ struct rte_eth_bond_8023ad_slave_info slave_info;
+ struct rte_eth_bond_8023ad_conf port_conf;
+ portid_t slaves[RTE_MAX_ETHPORTS];
+ portid_t port_id = res->port_id;
+ int num_active_slaves;
+ int bonding_mode;
+ int i;
+ int ret;
+
+ bonding_mode = rte_eth_bond_mode_get(port_id);
+ if (bonding_mode != BONDING_MODE_8023AD) {
+ fprintf(stderr, "\tBonding mode is not mode 4\n");
+ return;
+ }
+
+ num_active_slaves = rte_eth_bond_active_slaves_get(port_id, slaves,
+ RTE_MAX_ETHPORTS);
+ if (num_active_slaves < 0) {
+ fprintf(stderr, "\tFailed to get active slave list for port = %u\n",
+ port_id);
+ return;
+ }
+ if (num_active_slaves == 0)
+ fprintf(stderr, "\tIEEE802.3 port %u has no active slave\n",
+ port_id);
+
+ printf("\tIEEE802.3 port: %u\n", port_id);
+ ret = rte_eth_bond_8023ad_conf_get(port_id, &port_conf);
+ if (ret) {
+ fprintf(stderr, "\tGet bonded device %u info failed\n",
+ port_id);
+ return;
+ }
+ lacp_conf_show(&port_conf);
+
+ for (i = 0; i < num_active_slaves; i++) {
+ ret = rte_eth_bond_8023ad_slave_info(port_id, slaves[i],
+ &slave_info);
+ if (ret) {
+ fprintf(stderr, "\tGet slave device %u info failed\n",
+ slaves[i]);
+ return;
+ }
+ printf("\tSlave Port: %u\n", slaves[i]);
+ lacp_slave_info_show(&slave_info);
+ }
+}
+
+cmdline_parse_token_string_t cmd_show_bonding_lacp_info_show =
+TOKEN_STRING_INITIALIZER(struct cmd_show_bonding_lacp_info_result,
+ show, "show");
+cmdline_parse_token_string_t cmd_show_bonding_lacp_info_bonding =
+TOKEN_STRING_INITIALIZER(struct cmd_show_bonding_lacp_info_result,
+ bonding, "bonding");
+cmdline_parse_token_string_t cmd_show_bonding_lacp_info_lacp =
+TOKEN_STRING_INITIALIZER(struct cmd_show_bonding_lacp_info_result,
+ bonding, "lacp");
+cmdline_parse_token_string_t cmd_show_bonding_lacp_info_info =
+TOKEN_STRING_INITIALIZER(struct cmd_show_bonding_lacp_info_result,
+ info, "info");
+cmdline_parse_token_num_t cmd_show_bonding_lacp_info_port_id =
+TOKEN_NUM_INITIALIZER(struct cmd_show_bonding_lacp_info_result,
+ port_id, RTE_UINT16);
+
+cmdline_parse_inst_t cmd_show_bonding_lacp_info = {
+ .f = cmd_show_bonding_lacp_info_parsed,
+ .help_str = "show bonding lacp info <port_id> : "
+ "Show bonding IEEE802.3 information for port_id",
+ .data = NULL,
+ .tokens = {
+ (void *)&cmd_show_bonding_lacp_info_show,
+ (void *)&cmd_show_bonding_lacp_info_bonding,
+ (void *)&cmd_show_bonding_lacp_info_lacp,
+ (void *)&cmd_show_bonding_lacp_info_info,
+ (void *)&cmd_show_bonding_lacp_info_port_id,
+ NULL
+ }
+};
+
/* *** SHOW NIC BONDING CONFIGURATION *** */
struct cmd_show_bonding_config_result {
cmdline_fixed_string_t show;
@@ -17589,6 +17772,7 @@ cmdline_parse_ctx_t main_ctx[] = {
#ifdef RTE_NET_BOND
(cmdline_parse_inst_t *) &cmd_set_bonding_mode,
(cmdline_parse_inst_t *) &cmd_show_bonding_config,
+ (cmdline_parse_inst_t *) &cmd_show_bonding_lacp_info,
(cmdline_parse_inst_t *) &cmd_set_bonding_primary,
(cmdline_parse_inst_t *) &cmd_add_bonding_slave,
(cmdline_parse_inst_t *) &cmd_remove_bonding_slave,
diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index 4f8751be1c..8e64f09c11 100644
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -2630,6 +2630,12 @@ in balance mode with a transmission policy of layer 2+3::
Active Slaves (3): [1 3 4]
Primary: [3]
+show bonding lacp info
+~~~~~~~~~~~~~~~~~~~~~~
+
+Show information about the Link Bonding device in mode 4 (link-aggregation-802.3ad)::
+
+ testpmd> show bonding lacp info (port_id)
Register Functions
------------------
--
2.33.0
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: [dpdk-dev] [PATCH v3] app/testpmd: add cmdline to show LACP bonding info
2021-09-24 9:57 ` [dpdk-dev] [PATCH v3] " Min Hu (Connor)
@ 2021-10-11 8:17 ` Li, Xiaoyun
2021-10-11 14:19 ` Ferruh Yigit
0 siblings, 1 reply; 7+ messages in thread
From: Li, Xiaoyun @ 2021-10-11 8:17 UTC (permalink / raw)
To: Min Hu (Connor), dev; +Cc: Yigit, Ferruh
> -----Original Message-----
> From: Min Hu (Connor) <humin29@huawei.com>
> Sent: Friday, September 24, 2021 17:57
> To: dev@dpdk.org
> Cc: Yigit, Ferruh <ferruh.yigit@intel.com>; Li, Xiaoyun <xiaoyun.li@intel.com>
> Subject: [PATCH v3] app/testpmd: add cmdline to show LACP bonding info
>
> From: Chengchang Tang <tangchengchang@huawei.com>
>
> Add a new cmdline to help diagnostic the bonding mode 4 in testpmd.
>
> Show the lacp information about the bonded device and its slaves:
> show bonding lacp info <bonded device port_id>
>
> Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
> Signed-off-by: Min Hu(Connor) <humin29@huawei.com>
> ---
> v3:
> * fix state show.
>
> v2:
> * same patch with v1.
> ---
> app/test-pmd/cmdline.c | 184 ++++++++++++++++++++
> doc/guides/testpmd_app_ug/testpmd_funcs.rst | 6 +
> 2 files changed, 190 insertions(+)
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [dpdk-dev] [PATCH v3] app/testpmd: add cmdline to show LACP bonding info
2021-10-11 8:17 ` Li, Xiaoyun
@ 2021-10-11 14:19 ` Ferruh Yigit
0 siblings, 0 replies; 7+ messages in thread
From: Ferruh Yigit @ 2021-10-11 14:19 UTC (permalink / raw)
To: Li, Xiaoyun, Min Hu (Connor), dev
On 10/11/2021 9:17 AM, Li, Xiaoyun wrote:
>> -----Original Message-----
>> From: Min Hu (Connor) <humin29@huawei.com>
>> Sent: Friday, September 24, 2021 17:57
>> To: dev@dpdk.org
>> Cc: Yigit, Ferruh <ferruh.yigit@intel.com>; Li, Xiaoyun <xiaoyun.li@intel.com>
>> Subject: [PATCH v3] app/testpmd: add cmdline to show LACP bonding info
>>
>> From: Chengchang Tang <tangchengchang@huawei.com>
>>
>> Add a new cmdline to help diagnostic the bonding mode 4 in testpmd.
>>
>> Show the lacp information about the bonded device and its slaves:
>> show bonding lacp info <bonded device port_id>
>>
>> Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
>> Signed-off-by: Min Hu(Connor) <humin29@huawei.com>
>> ---
>> v3:
>> * fix state show.
>>
>> v2:
>> * same patch with v1.
>> ---
>> app/test-pmd/cmdline.c | 184 ++++++++++++++++++++
>> doc/guides/testpmd_app_ug/testpmd_funcs.rst | 6 +
>> 2 files changed, 190 insertions(+)
>
> Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
>
Applied to dpdk-next-net/main, thanks.
^ permalink raw reply [flat|nested] 7+ messages in thread