[dpdk-dev] [PATCH v2 1/3] security: add option to configure tunnel header verification

[Tejasree Kondoj <ktejasree@marvell.com>]

Add option to indicate whether outer header verification
need to be done as part of inbound IPsec processing.

With inline IPsec processing, SA lookup would be happening
in the Rx path of rte_ethdev. When rte_flow is configured to
support more than one SA, SPI would be used to lookup SA.
In such cases, additional verification would be required to
ensure duplicate SPIs are not getting processed in the inline path.

For lookaside cases, the same option can be used by application
to offload tunnel verification to the PMD.

These verifications would help in averting possible DoS attacks.

Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
---
 doc/guides/rel_notes/deprecation.rst   |  2 +-
 doc/guides/rel_notes/release_21_11.rst |  5 +++++
 lib/security/rte_security.h            | 17 +++++++++++++++++
 3 files changed, 23 insertions(+), 1 deletion(-)

diff --git a/doc/guides/rel_notes/deprecation.rst b/doc/guides/rel_notes/deprecation.rst
index 69fbde0c70..80ae9a6372 100644
--- a/doc/guides/rel_notes/deprecation.rst
+++ b/doc/guides/rel_notes/deprecation.rst
@@ -238,7 +238,7 @@ Deprecation Notices
 
 * security: The IPsec SA config options ``struct rte_security_ipsec_sa_options``
   will be updated with new fields to support new features like IPsec inner
-  checksum, tunnel header verification, TSO in case of protocol offload.
+  checksum, TSO in case of protocol offload.
 
 * ipsec: The structure ``rte_ipsec_sa_prm`` will be extended with a new field
   ``hdr_l3_len`` to configure tunnel L3 header length.
diff --git a/doc/guides/rel_notes/release_21_11.rst b/doc/guides/rel_notes/release_21_11.rst
index 0b7ffa5e50..623b52d9c9 100644
--- a/doc/guides/rel_notes/release_21_11.rst
+++ b/doc/guides/rel_notes/release_21_11.rst
@@ -181,6 +181,11 @@ ABI Changes
     soft and hard SA expiry limits. Limits can be either in units of packets or
     bytes.
 
+* security: add IPsec SA option to configure tunnel header verification
+
+  * Added SA option to indicate whether outer header verification need to be
+    done as part of inbound IPsec processing.
+
 
 Known Issues
 ------------
diff --git a/lib/security/rte_security.h b/lib/security/rte_security.h
index 88147e1f57..a10c9b5f00 100644
--- a/lib/security/rte_security.h
+++ b/lib/security/rte_security.h
@@ -55,6 +55,14 @@ enum rte_security_ipsec_tunnel_type {
 	/**< Outer header is IPv6 */
 };
 
+/**
+ * IPSEC tunnel header verification mode
+ *
+ * Controls how outer IP header is verified in inbound.
+ */
+#define RTE_SECURITY_IPSEC_TUNNEL_VERIFY_DST_ADDR     0x1
+#define RTE_SECURITY_IPSEC_TUNNEL_VERIFY_SRC_DST_ADDR 0x2
+
 /**
  * Security context for crypto/eth devices
  *
@@ -206,6 +214,15 @@ struct rte_security_ipsec_sa_options {
 	 * by the PMD.
 	 */
 	uint32_t iv_gen_disable : 1;
+
+	/** Verify tunnel header in inbound
+	 * * ``RTE_SECURITY_IPSEC_TUNNEL_VERIFY_DST_ADDR``: Verify destination
+	 *   IP address.
+	 *
+	 * * ``RTE_SECURITY_IPSEC_TUNNEL_VERIFY_SRC_DST_ADDR``: Verify both
+	 *   source and destination IP addresses.
+	 */
+	uint32_t tunnel_hdr_verify : 2;
 };
 
 /** IPSec security association direction */
-- 
2.27.0