From: Tejasree Kondoj <ktejasree@marvell.com>
To: Akhil Goyal <gakhil@marvell.com>,
Radu Nicolau <radu.nicolau@intel.com>,
Declan Doherty <declan.doherty@intel.com>
Cc: Tejasree Kondoj <ktejasree@marvell.com>,
Anoob Joseph <anoobj@marvell.com>,
Ankur Dwivedi <adwivedi@marvell.com>,
Jerin Jacob <jerinj@marvell.com>,
Konstantin Ananyev <konstantin.ananyev@intel.com>,
Ciara Power <ciara.power@intel.com>,
Hemant Agrawal <hemant.agrawal@nxp.com>,
Gagandeep Singh <g.singh@nxp.com>,
Fan Zhang <roy.fan.zhang@intel.com>,
Archana Muniganti <marchana@marvell.com>, <dev@dpdk.org>
Subject: [dpdk-dev] [PATCH v2 3/3] test/crypto: add tunnel header verification tests
Date: Tue, 28 Sep 2021 17:37:41 +0530 [thread overview]
Message-ID: <20210928120741.16674-4-ktejasree@marvell.com> (raw)
In-Reply-To: <20210928120741.16674-1-ktejasree@marvell.com>
Add test cases to verify tunnel header in IPsec inbound.
Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
---
app/test/test_cryptodev.c | 45 ++++++++++++++++++-
app/test/test_cryptodev_security_ipsec.c | 25 ++++++++++-
app/test/test_cryptodev_security_ipsec.h | 1 +
...st_cryptodev_security_ipsec_test_vectors.h | 3 ++
4 files changed, 71 insertions(+), 3 deletions(-)
diff --git a/app/test/test_cryptodev.c b/app/test/test_cryptodev.c
index 34b55a952e..665d19c0a4 100644
--- a/app/test/test_cryptodev.c
+++ b/app/test/test_cryptodev.c
@@ -8924,6 +8924,7 @@ test_ipsec_proto_process(const struct ipsec_test_data td[],
int salt_len, i, ret = TEST_SUCCESS;
struct rte_security_ctx *ctx;
uint8_t *input_text;
+ uint32_t verify;
ut_params->type = RTE_SECURITY_ACTION_TYPE_LOOKASIDE_PROTOCOL;
gbl_action_type = RTE_SECURITY_ACTION_TYPE_LOOKASIDE_PROTOCOL;
@@ -8933,11 +8934,19 @@ test_ipsec_proto_process(const struct ipsec_test_data td[],
/* Copy IPsec xform */
memcpy(&ipsec_xform, &td[0].ipsec_xform, sizeof(ipsec_xform));
+ dir = ipsec_xform.direction;
+ verify = flags->tunnel_hdr_verify;
+
+ if ((dir == RTE_SECURITY_IPSEC_SA_DIR_INGRESS) && verify) {
+ if (verify == RTE_SECURITY_IPSEC_TUNNEL_VERIFY_SRC_DST_ADDR)
+ src += 1;
+ else if (verify == RTE_SECURITY_IPSEC_TUNNEL_VERIFY_DST_ADDR)
+ dst += 1;
+ }
+
memcpy(&ipsec_xform.tunnel.ipv4.src_ip, &src, sizeof(src));
memcpy(&ipsec_xform.tunnel.ipv4.dst_ip, &dst, sizeof(dst));
- dir = ipsec_xform.direction;
-
ctx = rte_cryptodev_get_sec_ctx(dev_id);
sec_cap_idx.action = ut_params->type;
@@ -9229,6 +9238,30 @@ test_ipsec_proto_udp_encap(const void *data __rte_unused)
return test_ipsec_proto_all(&flags);
}
+static int
+test_ipsec_proto_tunnel_src_dst_addr_verify(const void *data __rte_unused)
+{
+ struct ipsec_test_flags flags;
+
+ memset(&flags, 0, sizeof(flags));
+
+ flags.tunnel_hdr_verify = RTE_SECURITY_IPSEC_TUNNEL_VERIFY_SRC_DST_ADDR;
+
+ return test_ipsec_proto_all(&flags);
+}
+
+static int
+test_ipsec_proto_tunnel_dst_addr_verify(const void *data __rte_unused)
+{
+ struct ipsec_test_flags flags;
+
+ memset(&flags, 0, sizeof(flags));
+
+ flags.tunnel_hdr_verify = RTE_SECURITY_IPSEC_TUNNEL_VERIFY_DST_ADDR;
+
+ return test_ipsec_proto_all(&flags);
+}
+
static int
test_PDCP_PROTO_all(void)
{
@@ -14173,6 +14206,14 @@ static struct unit_test_suite ipsec_proto_testsuite = {
"Negative test: ICV corruption",
ut_setup_security, ut_teardown,
test_ipsec_proto_err_icv_corrupt),
+ TEST_CASE_NAMED_ST(
+ "Tunnel dst addr verification",
+ ut_setup_security, ut_teardown,
+ test_ipsec_proto_tunnel_dst_addr_verify),
+ TEST_CASE_NAMED_ST(
+ "Tunnel src and dst addr verification",
+ ut_setup_security, ut_teardown,
+ test_ipsec_proto_tunnel_src_dst_addr_verify),
TEST_CASES_END() /**< NULL terminate unit test array */
}
};
diff --git a/app/test/test_cryptodev_security_ipsec.c b/app/test/test_cryptodev_security_ipsec.c
index 046536cc9c..f040630655 100644
--- a/app/test/test_cryptodev_security_ipsec.c
+++ b/app/test/test_cryptodev_security_ipsec.c
@@ -86,6 +86,15 @@ test_ipsec_sec_caps_verify(struct rte_security_ipsec_xform *ipsec_xform,
return -ENOTSUP;
}
+ if ((ipsec_xform->direction == RTE_SECURITY_IPSEC_SA_DIR_INGRESS) &&
+ (ipsec_xform->options.tunnel_hdr_verify >
+ sec_cap->ipsec.options.tunnel_hdr_verify)) {
+ if (!silent)
+ RTE_LOG(INFO, USER1,
+ "Tunnel header verify is not supported\n");
+ return -ENOTSUP;
+ }
+
return 0;
}
@@ -207,6 +216,9 @@ test_ipsec_td_update(struct ipsec_test_data td_inb[],
if (flags->udp_encap)
td_inb[i].ipsec_xform.options.udp_encap = 1;
+ td_inb[i].ipsec_xform.options.tunnel_hdr_verify =
+ flags->tunnel_hdr_verify;
+
/* Clear outbound specific flags */
td_inb[i].ipsec_xform.options.iv_gen_disable = 0;
}
@@ -292,7 +304,8 @@ test_ipsec_td_verify(struct rte_mbuf *m, const struct ipsec_test_data *td,
/* For tests with status as error for test success, skip verification */
if (td->ipsec_xform.direction == RTE_SECURITY_IPSEC_SA_DIR_INGRESS &&
(flags->icv_corrupt ||
- flags->sa_expiry_pkts_hard))
+ flags->sa_expiry_pkts_hard ||
+ flags->tunnel_hdr_verify))
return TEST_SUCCESS;
if (td->ipsec_xform.direction == RTE_SECURITY_IPSEC_SA_DIR_EGRESS &&
@@ -420,6 +433,16 @@ test_ipsec_status_check(struct rte_crypto_op *op,
}
}
+ if ((dir == RTE_SECURITY_IPSEC_SA_DIR_INGRESS) &&
+ flags->tunnel_hdr_verify) {
+ if (op->status != RTE_CRYPTO_OP_STATUS_ERROR) {
+ printf("Tunnel header verify test case failed\n");
+ return TEST_FAILED;
+ } else {
+ return TEST_SUCCESS;
+ }
+ }
+
if (dir == RTE_SECURITY_IPSEC_SA_DIR_INGRESS && flags->icv_corrupt) {
if (op->status != RTE_CRYPTO_OP_STATUS_ERROR) {
printf("ICV corruption test case failed\n");
diff --git a/app/test/test_cryptodev_security_ipsec.h b/app/test/test_cryptodev_security_ipsec.h
index 18f3c64bb7..a65cb54eae 100644
--- a/app/test/test_cryptodev_security_ipsec.h
+++ b/app/test/test_cryptodev_security_ipsec.h
@@ -53,6 +53,7 @@ struct ipsec_test_flags {
bool sa_expiry_pkts_hard;
bool icv_corrupt;
bool iv_gen;
+ uint32_t tunnel_hdr_verify;
bool udp_encap;
};
diff --git a/app/test/test_cryptodev_security_ipsec_test_vectors.h b/app/test/test_cryptodev_security_ipsec_test_vectors.h
index 38ea43d157..4e147ec19c 100644
--- a/app/test/test_cryptodev_security_ipsec_test_vectors.h
+++ b/app/test/test_cryptodev_security_ipsec_test_vectors.h
@@ -94,6 +94,7 @@ struct ipsec_test_data pkt_aes_128_gcm = {
.options.dec_ttl = 0,
.options.ecn = 0,
.options.stats = 0,
+ .options.tunnel_hdr_verify = 0,
.direction = RTE_SECURITY_IPSEC_SA_DIR_EGRESS,
.proto = RTE_SECURITY_IPSEC_SA_PROTO_ESP,
.mode = RTE_SECURITY_IPSEC_SA_MODE_TUNNEL,
@@ -190,6 +191,7 @@ struct ipsec_test_data pkt_aes_192_gcm = {
.options.dec_ttl = 0,
.options.ecn = 0,
.options.stats = 0,
+ .options.tunnel_hdr_verify = 0,
.direction = RTE_SECURITY_IPSEC_SA_DIR_EGRESS,
.proto = RTE_SECURITY_IPSEC_SA_PROTO_ESP,
.mode = RTE_SECURITY_IPSEC_SA_MODE_TUNNEL,
@@ -289,6 +291,7 @@ struct ipsec_test_data pkt_aes_256_gcm = {
.options.dec_ttl = 0,
.options.ecn = 0,
.options.stats = 0,
+ .options.tunnel_hdr_verify = 0,
.direction = RTE_SECURITY_IPSEC_SA_DIR_EGRESS,
.proto = RTE_SECURITY_IPSEC_SA_PROTO_ESP,
.mode = RTE_SECURITY_IPSEC_SA_MODE_TUNNEL,
--
2.27.0
prev parent reply other threads:[~2021-09-28 11:14 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-28 12:07 [dpdk-dev] [PATCH v2 0/3] add option to configure tunnel header verification Tejasree Kondoj
2021-09-28 12:07 ` [dpdk-dev] [PATCH v2 1/3] security: " Tejasree Kondoj
2021-09-28 16:00 ` Akhil Goyal
2021-09-28 12:07 ` [dpdk-dev] [PATCH v2 2/3] common/cnxk: add support for " Tejasree Kondoj
2021-09-28 12:07 ` Tejasree Kondoj [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210928120741.16674-4-ktejasree@marvell.com \
--to=ktejasree@marvell.com \
--cc=adwivedi@marvell.com \
--cc=anoobj@marvell.com \
--cc=ciara.power@intel.com \
--cc=declan.doherty@intel.com \
--cc=dev@dpdk.org \
--cc=g.singh@nxp.com \
--cc=gakhil@marvell.com \
--cc=hemant.agrawal@nxp.com \
--cc=jerinj@marvell.com \
--cc=konstantin.ananyev@intel.com \
--cc=marchana@marvell.com \
--cc=radu.nicolau@intel.com \
--cc=roy.fan.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).