From: Alvin Zhang <alvinx.zhang@intel.com>
To: beilei.xing@intel.com, junfeng.guo@intel.com,
ktraynor@redhat.com, qi.z.zhang@intel.com
Cc: dev@dpdk.org, Alvin Zhang <alvinx.zhang@intel.com>, stable@dpdk.org
Subject: [dpdk-dev] [PATCH v3] net/i40e: fix Rx packet statistics
Date: Thu, 30 Sep 2021 13:19:57 +0800 [thread overview]
Message-ID: <20210930051957.12628-1-alvinx.zhang@intel.com> (raw)
In-Reply-To: <20210928032239.17756-1-alvinx.zhang@intel.com>
Some packets are discarded by the NIC because they are larger than
the MTU, these packets should be counted as "RX error" instead of
"RX packet", for example:
pkt1 = Ether()/IP()/Raw('x' * 1400)
pkt2 = Ether()/IP()/Raw('x' * 1500)
---------------- Forward statistics for port 0 -----------------
RX-packets: 2 RX-dropped: 0 RX-total: 2
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------
Here the packet pkt2 has been discarded, but still was counted
by "RX-packets"
The register 'GL_RXERR1' can count above discarded packets.
This patch adds reading and calculation of the 'GL_RXERR1' counter
when reporting DPDK statistics.
Fixes: f4a91c38b4ad ("i40e: add extended stats")
Cc: stable@dpdk.org
Signed-off-by: Alvin Zhang <alvinx.zhang@intel.com>
---
v3: update code notes according to comment.
---
drivers/net/i40e/i40e_ethdev.c | 16 +++++++++++++---
drivers/net/i40e/i40e_ethdev.h | 10 ++++++++++
2 files changed, 23 insertions(+), 3 deletions(-)
diff --git a/drivers/net/i40e/i40e_ethdev.c b/drivers/net/i40e/i40e_ethdev.c
index 7a2a828..7a207b2 100644
--- a/drivers/net/i40e/i40e_ethdev.c
+++ b/drivers/net/i40e/i40e_ethdev.c
@@ -532,7 +532,7 @@ static int i40e_sw_tunnel_filter_insert(struct i40e_pf *pf,
/* store statistics names and its offset in stats structure */
struct rte_i40e_xstats_name_off {
char name[RTE_ETH_XSTATS_NAME_SIZE];
- unsigned offset;
+ int offset;
};
static const struct rte_i40e_xstats_name_off rte_i40e_stats_strings[] = {
@@ -542,6 +542,8 @@ struct rte_i40e_xstats_name_off {
{"rx_dropped_packets", offsetof(struct i40e_eth_stats, rx_discards)},
{"rx_unknown_protocol_packets", offsetof(struct i40e_eth_stats,
rx_unknown_protocol)},
+ {"rx_size_error_packets", offsetof(struct i40e_pf, rx_err1) -
+ offsetof(struct i40e_pf, stats)},
{"tx_unicast_packets", offsetof(struct i40e_eth_stats, tx_unicast)},
{"tx_multicast_packets", offsetof(struct i40e_eth_stats, tx_multicast)},
{"tx_broadcast_packets", offsetof(struct i40e_eth_stats, tx_broadcast)},
@@ -3238,6 +3240,10 @@ void i40e_flex_payload_reg_set_default(struct i40e_hw *hw)
pf->offset_loaded,
&os->eth.rx_unknown_protocol,
&ns->eth.rx_unknown_protocol);
+ i40e_stat_update_48(hw, I40E_GL_RXERR1_H(hw->pf_id + I40E_MAX_VF),
+ I40E_GL_RXERR1_L(hw->pf_id + I40E_MAX_VF),
+ pf->offset_loaded, &pf->rx_err1_offset,
+ &pf->rx_err1);
i40e_stat_update_48_in_64(hw, I40E_GLPRT_GOTCH(hw->port),
I40E_GLPRT_GOTCL(hw->port),
pf->offset_loaded, &os->eth.tx_bytes,
@@ -3437,7 +3443,8 @@ void i40e_flex_payload_reg_set_default(struct i40e_hw *hw)
stats->ipackets = pf->main_vsi->eth_stats.rx_unicast +
pf->main_vsi->eth_stats.rx_multicast +
pf->main_vsi->eth_stats.rx_broadcast -
- pf->main_vsi->eth_stats.rx_discards;
+ pf->main_vsi->eth_stats.rx_discards -
+ pf->rx_err1;
stats->opackets = ns->eth.tx_unicast +
ns->eth.tx_multicast +
ns->eth.tx_broadcast;
@@ -3451,7 +3458,8 @@ void i40e_flex_payload_reg_set_default(struct i40e_hw *hw)
pf->main_vsi->eth_stats.rx_discards;
stats->ierrors = ns->crc_errors +
ns->rx_length_errors + ns->rx_undersize +
- ns->rx_oversize + ns->rx_fragments + ns->rx_jabber;
+ ns->rx_oversize + ns->rx_fragments + ns->rx_jabber +
+ pf->rx_err1;
if (pf->vfs) {
for (i = 0; i < pf->vf_num; i++) {
@@ -6232,6 +6240,8 @@ struct i40e_vsi *
memset(&pf->stats_offset, 0, sizeof(struct i40e_hw_port_stats));
memset(&pf->internal_stats, 0, sizeof(struct i40e_eth_stats));
memset(&pf->internal_stats_offset, 0, sizeof(struct i40e_eth_stats));
+ pf->rx_err1 = 0;
+ pf->rx_err1_offset = 0;
ret = i40e_pf_get_switch_config(pf);
if (ret != I40E_SUCCESS) {
diff --git a/drivers/net/i40e/i40e_ethdev.h b/drivers/net/i40e/i40e_ethdev.h
index cd6deab..8e14d9a 100644
--- a/drivers/net/i40e/i40e_ethdev.h
+++ b/drivers/net/i40e/i40e_ethdev.h
@@ -19,6 +19,13 @@
#include "base/i40e_type.h"
#include "base/virtchnl.h"
+/**
+ * _i=0...143,
+ * counters 0-127 are for the 128 VFs,
+ * counters 128-143 are for the 16 PFs
+ */
+#define I40E_GL_RXERR1_H(_i) (0x00318004 + ((_i) * 8))
+
#define I40E_VLAN_TAG_SIZE 4
#define I40E_AQ_LEN 32
@@ -1134,6 +1141,9 @@ struct i40e_pf {
struct i40e_hw_port_stats stats_offset;
struct i40e_hw_port_stats stats;
+ u64 rx_err1; /* rxerr1 */
+ u64 rx_err1_offset;
+
/* internal packet statistics, it should be excluded from the total */
struct i40e_eth_stats internal_stats_offset;
struct i40e_eth_stats internal_stats;
--
1.8.3.1
next prev parent reply other threads:[~2021-09-30 5:20 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-26 7:57 [dpdk-dev] [PATCH] " Alvin Zhang
2021-09-27 16:00 ` Kevin Traynor
2021-09-28 2:12 ` Zhang, AlvinX
2021-09-28 8:53 ` Kevin Traynor
2021-09-28 3:22 ` [dpdk-dev] [PATCH v2] " Alvin Zhang
2021-09-28 11:16 ` Zhang, Qi Z
2021-09-29 1:33 ` Zhang, AlvinX
2021-09-30 5:19 ` Alvin Zhang [this message]
2021-10-08 6:17 ` [dpdk-dev] [PATCH v3] " Zhang, Qi Z
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210930051957.12628-1-alvinx.zhang@intel.com \
--to=alvinx.zhang@intel.com \
--cc=beilei.xing@intel.com \
--cc=dev@dpdk.org \
--cc=junfeng.guo@intel.com \
--cc=ktraynor@redhat.com \
--cc=qi.z.zhang@intel.com \
--cc=stable@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).