From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mails.dpdk.org (mails.dpdk.org [217.70.189.124]) by inbox.dpdk.org (Postfix) with ESMTP id 600B4A0C43; Fri, 15 Oct 2021 21:02:50 +0200 (CEST) Received: from [217.70.189.124] (localhost [127.0.0.1]) by mails.dpdk.org (Postfix) with ESMTP id 8BBCB410FF; Fri, 15 Oct 2021 21:02:48 +0200 (CEST) Received: from mx0b-0016f401.pphosted.com (mx0b-0016f401.pphosted.com [67.231.156.173]) by mails.dpdk.org (Postfix) with ESMTP id DB044410F8 for ; Fri, 15 Oct 2021 21:02:44 +0200 (CEST) Received: from pps.filterd (m0045851.ppops.net [127.0.0.1]) by mx0b-0016f401.pphosted.com (8.16.1.2/8.16.1.2) with SMTP id 19FIukqv020995 for ; Fri, 15 Oct 2021 12:02:44 -0700 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=marvell.com; h=from : to : cc : subject : date : message-id : in-reply-to : references : mime-version : content-transfer-encoding : content-type; s=pfpt0220; bh=I2eUJdpPwxu2g3F4JCTtI5oHoZVXjK26cV8xLrHYWCY=; b=Jdpj/Rib/ehl0tB8bgePJHkn2xp/Lg0mCKXv9gXD6vKzQbe7BMRQHLdCOQ0HcdMP61rE J+L3RKNY6xgqZAsCMaZNrrZywtsrwzg6YSk7PuLmEvKK/NAnH1L4euD4TPyrmWQudfs+ 4MWL4uQA2owvPcNwu6b6gseM54NxgNIUDMqgbzH8MmSMCGCdE0HsZ7ZQxxVGid0G03tV joqsyGxId1ONoN4RJKBDI0BpL5pMfjzQLsTN4GNpc54m/UXR5OLP3W1NnpOo0NbQMZM6 fwP1uDSgQ3AN3gpgguVx/v2lLjzQng2qSUDIdo98wdwHeNS2vMiyjzdlmJXSxG82oLmL Lg== Received: from dc5-exch01.marvell.com ([199.233.59.181]) by mx0b-0016f401.pphosted.com with ESMTP id 3bq6gta8dq-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-SHA384 bits=256 verify=NOT) for ; Fri, 15 Oct 2021 12:02:43 -0700 Received: from DC5-EXCH02.marvell.com (10.69.176.39) by DC5-EXCH01.marvell.com (10.69.176.38) with Microsoft SMTP Server (TLS) id 15.0.1497.18; Fri, 15 Oct 2021 12:02:41 -0700 Received: from maili.marvell.com (10.69.176.80) by DC5-EXCH02.marvell.com (10.69.176.39) with Microsoft SMTP Server id 15.0.1497.18 via Frontend Transport; Fri, 15 Oct 2021 12:02:41 -0700 Received: from BG-LT7430.marvell.com (BG-LT7430.marvell.com [10.28.177.176]) by maili.marvell.com (Postfix) with ESMTP id 875B45B6928; Fri, 15 Oct 2021 12:02:39 -0700 (PDT) From: To: CC: , Pavan Nikhilesh Date: Sat, 16 Oct 2021 00:32:09 +0530 Message-ID: <20211015190221.2160-2-pbhagavatula@marvell.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20211015190221.2160-1-pbhagavatula@marvell.com> References: <20211006065012.16508-1-pbhagavatula@marvell.com> <20211015190221.2160-1-pbhagavatula@marvell.com> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Content-Type: text/plain X-Proofpoint-GUID: zzGBVV1JwS1tC-qfsO3VNvT6NBu23Ek4 X-Proofpoint-ORIG-GUID: zzGBVV1JwS1tC-qfsO3VNvT6NBu23Ek4 X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.182.1,Aquarius:18.0.790,Hydra:6.0.425,FMLib:17.0.607.475 definitions=2021-10-15_06,2021-10-14_02,2020-04-07_01 Subject: [dpdk-dev] [PATCH v4 02/14] eventdev: separate internal structures X-BeenThere: dev@dpdk.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: DPDK patches and discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: dev-bounces@dpdk.org Sender: "dev" From: Pavan Nikhilesh Create rte_eventdev_core.h and move all the internal data structures to this file. These structures are mostly used by drivers, but they need to be in the public header file as they are accessed by datapath inline functions for performance reasons. The accessibility of these data structures is not changed. Signed-off-by: Pavan Nikhilesh --- lib/eventdev/eventdev_pmd.h | 3 - lib/eventdev/meson.build | 3 + lib/eventdev/rte_eventdev.h | 718 +++++++++++++------------------ lib/eventdev/rte_eventdev_core.h | 138 ++++++ 4 files changed, 437 insertions(+), 425 deletions(-) create mode 100644 lib/eventdev/rte_eventdev_core.h diff --git a/lib/eventdev/eventdev_pmd.h b/lib/eventdev/eventdev_pmd.h index 688f30d45e..9b2aec8371 100644 --- a/lib/eventdev/eventdev_pmd.h +++ b/lib/eventdev/eventdev_pmd.h @@ -87,9 +87,6 @@ struct rte_eventdev_global { uint8_t nb_devs; /**< Number of devices found */ }; -extern struct rte_eventdev *rte_eventdevs; -/** The pool of rte_eventdev structures. */ - /** * Get the rte_eventdev structure device pointer for the named device. * diff --git a/lib/eventdev/meson.build b/lib/eventdev/meson.build index 523ea9ccae..8b51fde361 100644 --- a/lib/eventdev/meson.build +++ b/lib/eventdev/meson.build @@ -27,6 +27,9 @@ headers = files( 'rte_event_crypto_adapter.h', 'rte_event_eth_tx_adapter.h', ) +indirect_headers += files( + 'rte_eventdev_core.h', +) driver_sdk_headers += files( 'eventdev_pmd.h', 'eventdev_pmd_pci.h', diff --git a/lib/eventdev/rte_eventdev.h b/lib/eventdev/rte_eventdev.h index 0c701888d5..1b11d4576d 100644 --- a/lib/eventdev/rte_eventdev.h +++ b/lib/eventdev/rte_eventdev.h @@ -1324,317 +1324,6 @@ int rte_event_eth_tx_adapter_caps_get(uint8_t dev_id, uint16_t eth_port_id, uint32_t *caps); -struct eventdev_ops; -struct rte_eventdev; - -typedef uint16_t (*event_enqueue_t)(void *port, const struct rte_event *ev); -/**< @internal Enqueue event on port of a device */ - -typedef uint16_t (*event_enqueue_burst_t)(void *port, - const struct rte_event ev[], uint16_t nb_events); -/**< @internal Enqueue burst of events on port of a device */ - -typedef uint16_t (*event_dequeue_t)(void *port, struct rte_event *ev, - uint64_t timeout_ticks); -/**< @internal Dequeue event from port of a device */ - -typedef uint16_t (*event_dequeue_burst_t)(void *port, struct rte_event ev[], - uint16_t nb_events, uint64_t timeout_ticks); -/**< @internal Dequeue burst of events from port of a device */ - -typedef uint16_t (*event_tx_adapter_enqueue_t)(void *port, - struct rte_event ev[], - uint16_t nb_events); -/**< @internal Enqueue burst of events on port of a device */ - -typedef uint16_t (*event_tx_adapter_enqueue_same_dest_t)(void *port, - struct rte_event ev[], - uint16_t nb_events); -/**< @internal Enqueue burst of events on port of a device supporting - * burst having same destination Ethernet port & Tx queue. - */ - -typedef uint16_t (*event_crypto_adapter_enqueue_t)(void *port, - struct rte_event ev[], - uint16_t nb_events); -/**< @internal Enqueue burst of events on crypto adapter */ - -#define RTE_EVENTDEV_NAME_MAX_LEN (64) -/**< @internal Max length of name of event PMD */ - -/** - * @internal - * The data part, with no function pointers, associated with each device. - * - * This structure is safe to place in shared memory to be common among - * different processes in a multi-process configuration. - */ -struct rte_eventdev_data { - int socket_id; - /**< Socket ID where memory is allocated */ - uint8_t dev_id; - /**< Device ID for this instance */ - uint8_t nb_queues; - /**< Number of event queues. */ - uint8_t nb_ports; - /**< Number of event ports. */ - void **ports; - /**< Array of pointers to ports. */ - struct rte_event_port_conf *ports_cfg; - /**< Array of port configuration structures. */ - struct rte_event_queue_conf *queues_cfg; - /**< Array of queue configuration structures. */ - uint16_t *links_map; - /**< Memory to store queues to port connections. */ - void *dev_private; - /**< PMD-specific private data */ - uint32_t event_dev_cap; - /**< Event device capabilities(RTE_EVENT_DEV_CAP_)*/ - struct rte_event_dev_config dev_conf; - /**< Configuration applied to device. */ - uint8_t service_inited; - /* Service initialization state */ - uint32_t service_id; - /* Service ID*/ - void *dev_stop_flush_arg; - /**< User-provided argument for event flush function */ - - RTE_STD_C11 - uint8_t dev_started : 1; - /**< Device state: STARTED(1)/STOPPED(0) */ - - char name[RTE_EVENTDEV_NAME_MAX_LEN]; - /**< Unique identifier name */ - - uint64_t reserved_64s[4]; /**< Reserved for future fields */ - void *reserved_ptrs[4]; /**< Reserved for future fields */ -} __rte_cache_aligned; - -/** @internal The data structure associated with each event device. */ -struct rte_eventdev { - event_enqueue_t enqueue; - /**< Pointer to PMD enqueue function. */ - event_enqueue_burst_t enqueue_burst; - /**< Pointer to PMD enqueue burst function. */ - event_enqueue_burst_t enqueue_new_burst; - /**< Pointer to PMD enqueue burst function(op new variant) */ - event_enqueue_burst_t enqueue_forward_burst; - /**< Pointer to PMD enqueue burst function(op forward variant) */ - event_dequeue_t dequeue; - /**< Pointer to PMD dequeue function. */ - event_dequeue_burst_t dequeue_burst; - /**< Pointer to PMD dequeue burst function. */ - event_tx_adapter_enqueue_same_dest_t txa_enqueue_same_dest; - /**< Pointer to PMD eth Tx adapter burst enqueue function with - * events destined to same Eth port & Tx queue. - */ - event_tx_adapter_enqueue_t txa_enqueue; - /**< Pointer to PMD eth Tx adapter enqueue function. */ - struct rte_eventdev_data *data; - /**< Pointer to device data */ - struct eventdev_ops *dev_ops; - /**< Functions exported by PMD */ - struct rte_device *dev; - /**< Device info. supplied by probing */ - - RTE_STD_C11 - uint8_t attached : 1; - /**< Flag indicating the device is attached */ - - event_crypto_adapter_enqueue_t ca_enqueue; - /**< Pointer to PMD crypto adapter enqueue function. */ - - uint64_t reserved_64s[4]; /**< Reserved for future fields */ - void *reserved_ptrs[3]; /**< Reserved for future fields */ -} __rte_cache_aligned; - -extern struct rte_eventdev *rte_eventdevs; -/** @internal The pool of rte_eventdev structures. */ - -static __rte_always_inline uint16_t -__rte_event_enqueue_burst(uint8_t dev_id, uint8_t port_id, - const struct rte_event ev[], uint16_t nb_events, - const event_enqueue_burst_t fn) -{ - const struct rte_eventdev *dev = &rte_eventdevs[dev_id]; - -#ifdef RTE_LIBRTE_EVENTDEV_DEBUG - if (dev_id >= RTE_EVENT_MAX_DEVS || !rte_eventdevs[dev_id].attached) { - rte_errno = EINVAL; - return 0; - } - - if (port_id >= dev->data->nb_ports) { - rte_errno = EINVAL; - return 0; - } -#endif - rte_eventdev_trace_enq_burst(dev_id, port_id, ev, nb_events, fn); - /* - * Allow zero cost non burst mode routine invocation if application - * requests nb_events as const one - */ - if (nb_events == 1) - return (*dev->enqueue)(dev->data->ports[port_id], ev); - else - return fn(dev->data->ports[port_id], ev, nb_events); -} - -/** - * Enqueue a burst of events objects or an event object supplied in *rte_event* - * structure on an event device designated by its *dev_id* through the event - * port specified by *port_id*. Each event object specifies the event queue on - * which it will be enqueued. - * - * The *nb_events* parameter is the number of event objects to enqueue which are - * supplied in the *ev* array of *rte_event* structure. - * - * Event operations RTE_EVENT_OP_FORWARD and RTE_EVENT_OP_RELEASE must only be - * enqueued to the same port that their associated events were dequeued from. - * - * The rte_event_enqueue_burst() function returns the number of - * events objects it actually enqueued. A return value equal to *nb_events* - * means that all event objects have been enqueued. - * - * @param dev_id - * The identifier of the device. - * @param port_id - * The identifier of the event port. - * @param ev - * Points to an array of *nb_events* objects of type *rte_event* structure - * which contain the event object enqueue operations to be processed. - * @param nb_events - * The number of event objects to enqueue, typically number of - * rte_event_port_attr_get(...RTE_EVENT_PORT_ATTR_ENQ_DEPTH...) - * available for this port. - * - * @return - * The number of event objects actually enqueued on the event device. The - * return value can be less than the value of the *nb_events* parameter when - * the event devices queue is full or if invalid parameters are specified in a - * *rte_event*. If the return value is less than *nb_events*, the remaining - * events at the end of ev[] are not consumed and the caller has to take care - * of them, and rte_errno is set accordingly. Possible errno values include: - * - EINVAL The port ID is invalid, device ID is invalid, an event's queue - * ID is invalid, or an event's sched type doesn't match the - * capabilities of the destination queue. - * - ENOSPC The event port was backpressured and unable to enqueue - * one or more events. This error code is only applicable to - * closed systems. - * @see rte_event_port_attr_get(), RTE_EVENT_PORT_ATTR_ENQ_DEPTH - */ -static inline uint16_t -rte_event_enqueue_burst(uint8_t dev_id, uint8_t port_id, - const struct rte_event ev[], uint16_t nb_events) -{ - const struct rte_eventdev *dev = &rte_eventdevs[dev_id]; - - return __rte_event_enqueue_burst(dev_id, port_id, ev, nb_events, - dev->enqueue_burst); -} - -/** - * Enqueue a burst of events objects of operation type *RTE_EVENT_OP_NEW* on - * an event device designated by its *dev_id* through the event port specified - * by *port_id*. - * - * Provides the same functionality as rte_event_enqueue_burst(), expect that - * application can use this API when the all objects in the burst contains - * the enqueue operation of the type *RTE_EVENT_OP_NEW*. This specialized - * function can provide the additional hint to the PMD and optimize if possible. - * - * The rte_event_enqueue_new_burst() result is undefined if the enqueue burst - * has event object of operation type != RTE_EVENT_OP_NEW. - * - * @param dev_id - * The identifier of the device. - * @param port_id - * The identifier of the event port. - * @param ev - * Points to an array of *nb_events* objects of type *rte_event* structure - * which contain the event object enqueue operations to be processed. - * @param nb_events - * The number of event objects to enqueue, typically number of - * rte_event_port_attr_get(...RTE_EVENT_PORT_ATTR_ENQ_DEPTH...) - * available for this port. - * - * @return - * The number of event objects actually enqueued on the event device. The - * return value can be less than the value of the *nb_events* parameter when - * the event devices queue is full or if invalid parameters are specified in a - * *rte_event*. If the return value is less than *nb_events*, the remaining - * events at the end of ev[] are not consumed and the caller has to take care - * of them, and rte_errno is set accordingly. Possible errno values include: - * - EINVAL The port ID is invalid, device ID is invalid, an event's queue - * ID is invalid, or an event's sched type doesn't match the - * capabilities of the destination queue. - * - ENOSPC The event port was backpressured and unable to enqueue - * one or more events. This error code is only applicable to - * closed systems. - * @see rte_event_port_attr_get(), RTE_EVENT_PORT_ATTR_ENQ_DEPTH - * @see rte_event_enqueue_burst() - */ -static inline uint16_t -rte_event_enqueue_new_burst(uint8_t dev_id, uint8_t port_id, - const struct rte_event ev[], uint16_t nb_events) -{ - const struct rte_eventdev *dev = &rte_eventdevs[dev_id]; - - return __rte_event_enqueue_burst(dev_id, port_id, ev, nb_events, - dev->enqueue_new_burst); -} - -/** - * Enqueue a burst of events objects of operation type *RTE_EVENT_OP_FORWARD* - * on an event device designated by its *dev_id* through the event port - * specified by *port_id*. - * - * Provides the same functionality as rte_event_enqueue_burst(), expect that - * application can use this API when the all objects in the burst contains - * the enqueue operation of the type *RTE_EVENT_OP_FORWARD*. This specialized - * function can provide the additional hint to the PMD and optimize if possible. - * - * The rte_event_enqueue_new_burst() result is undefined if the enqueue burst - * has event object of operation type != RTE_EVENT_OP_FORWARD. - * - * @param dev_id - * The identifier of the device. - * @param port_id - * The identifier of the event port. - * @param ev - * Points to an array of *nb_events* objects of type *rte_event* structure - * which contain the event object enqueue operations to be processed. - * @param nb_events - * The number of event objects to enqueue, typically number of - * rte_event_port_attr_get(...RTE_EVENT_PORT_ATTR_ENQ_DEPTH...) - * available for this port. - * - * @return - * The number of event objects actually enqueued on the event device. The - * return value can be less than the value of the *nb_events* parameter when - * the event devices queue is full or if invalid parameters are specified in a - * *rte_event*. If the return value is less than *nb_events*, the remaining - * events at the end of ev[] are not consumed and the caller has to take care - * of them, and rte_errno is set accordingly. Possible errno values include: - * - EINVAL The port ID is invalid, device ID is invalid, an event's queue - * ID is invalid, or an event's sched type doesn't match the - * capabilities of the destination queue. - * - ENOSPC The event port was backpressured and unable to enqueue - * one or more events. This error code is only applicable to - * closed systems. - * @see rte_event_port_attr_get(), RTE_EVENT_PORT_ATTR_ENQ_DEPTH - * @see rte_event_enqueue_burst() - */ -static inline uint16_t -rte_event_enqueue_forward_burst(uint8_t dev_id, uint8_t port_id, - const struct rte_event ev[], uint16_t nb_events) -{ - const struct rte_eventdev *dev = &rte_eventdevs[dev_id]; - - return __rte_event_enqueue_burst(dev_id, port_id, ev, nb_events, - dev->enqueue_forward_burst); -} - /** * Converts nanoseconds to *timeout_ticks* value for rte_event_dequeue_burst() * @@ -1665,124 +1354,27 @@ rte_event_dequeue_timeout_ticks(uint8_t dev_id, uint64_t ns, uint64_t *timeout_ticks); /** - * Dequeue a burst of events objects or an event object from the event port - * designated by its *event_port_id*, on an event device designated - * by its *dev_id*. - * - * rte_event_dequeue_burst() does not dictate the specifics of scheduling - * algorithm as each eventdev driver may have different criteria to schedule - * an event. However, in general, from an application perspective scheduler may - * use the following scheme to dispatch an event to the port. - * - * 1) Selection of event queue based on - * a) The list of event queues are linked to the event port. - * b) If the device has RTE_EVENT_DEV_CAP_QUEUE_QOS capability then event - * queue selection from list is based on event queue priority relative to - * other event queue supplied as *priority* in rte_event_queue_setup() - * c) If the device has RTE_EVENT_DEV_CAP_EVENT_QOS capability then event - * queue selection from the list is based on event priority supplied as - * *priority* in rte_event_enqueue_burst() - * 2) Selection of event - * a) The number of flows available in selected event queue. - * b) Schedule type method associated with the event - * - * The *nb_events* parameter is the maximum number of event objects to dequeue - * which are returned in the *ev* array of *rte_event* structure. + * Link multiple source event queues supplied in *queues* to the destination + * event port designated by its *port_id* with associated service priority + * supplied in *priorities* on the event device designated by its *dev_id*. * - * The rte_event_dequeue_burst() function returns the number of events objects - * it actually dequeued. A return value equal to *nb_events* means that all - * event objects have been dequeued. + * The link establishment shall enable the event port *port_id* from + * receiving events from the specified event queue(s) supplied in *queues* * - * The number of events dequeued is the number of scheduler contexts held by - * this port. These contexts are automatically released in the next - * rte_event_dequeue_burst() invocation if the port supports implicit - * releases, or invoking rte_event_enqueue_burst() with RTE_EVENT_OP_RELEASE - * operation can be used to release the contexts early. + * An event queue may link to one or more event ports. + * The number of links can be established from an event queue to event port is + * implementation defined. * - * Event operations RTE_EVENT_OP_FORWARD and RTE_EVENT_OP_RELEASE must only be - * enqueued to the same port that their associated events were dequeued from. + * Event queue(s) to event port link establishment can be changed at runtime + * without re-configuring the device to support scaling and to reduce the + * latency of critical work by establishing the link with more event ports + * at runtime. * * @param dev_id * The identifier of the device. + * * @param port_id - * The identifier of the event port. - * @param[out] ev - * Points to an array of *nb_events* objects of type *rte_event* structure - * for output to be populated with the dequeued event objects. - * @param nb_events - * The maximum number of event objects to dequeue, typically number of - * rte_event_port_dequeue_depth() available for this port. - * - * @param timeout_ticks - * - 0 no-wait, returns immediately if there is no event. - * - >0 wait for the event, if the device is configured with - * RTE_EVENT_DEV_CFG_PER_DEQUEUE_TIMEOUT then this function will wait until - * at least one event is available or *timeout_ticks* time. - * if the device is not configured with RTE_EVENT_DEV_CFG_PER_DEQUEUE_TIMEOUT - * then this function will wait until the event available or - * *dequeue_timeout_ns* ns which was previously supplied to - * rte_event_dev_configure() - * - * @return - * The number of event objects actually dequeued from the port. The return - * value can be less than the value of the *nb_events* parameter when the - * event port's queue is not full. - * - * @see rte_event_port_dequeue_depth() - */ -static inline uint16_t -rte_event_dequeue_burst(uint8_t dev_id, uint8_t port_id, struct rte_event ev[], - uint16_t nb_events, uint64_t timeout_ticks) -{ - struct rte_eventdev *dev = &rte_eventdevs[dev_id]; - -#ifdef RTE_LIBRTE_EVENTDEV_DEBUG - if (dev_id >= RTE_EVENT_MAX_DEVS || !rte_eventdevs[dev_id].attached) { - rte_errno = EINVAL; - return 0; - } - - if (port_id >= dev->data->nb_ports) { - rte_errno = EINVAL; - return 0; - } -#endif - rte_eventdev_trace_deq_burst(dev_id, port_id, ev, nb_events); - /* - * Allow zero cost non burst mode routine invocation if application - * requests nb_events as const one - */ - if (nb_events == 1) - return (*dev->dequeue)( - dev->data->ports[port_id], ev, timeout_ticks); - else - return (*dev->dequeue_burst)( - dev->data->ports[port_id], ev, nb_events, - timeout_ticks); -} - -/** - * Link multiple source event queues supplied in *queues* to the destination - * event port designated by its *port_id* with associated service priority - * supplied in *priorities* on the event device designated by its *dev_id*. - * - * The link establishment shall enable the event port *port_id* from - * receiving events from the specified event queue(s) supplied in *queues* - * - * An event queue may link to one or more event ports. - * The number of links can be established from an event queue to event port is - * implementation defined. - * - * Event queue(s) to event port link establishment can be changed at runtime - * without re-configuring the device to support scaling and to reduce the - * latency of critical work by establishing the link with more event ports - * at runtime. - * - * @param dev_id - * The identifier of the device. - * - * @param port_id - * Event port identifier to select the destination port to link. + * Event port identifier to select the destination port to link. * * @param queues * Points to an array of *nb_links* event queues to be linked @@ -2148,6 +1740,288 @@ rte_event_vector_pool_create(const char *name, unsigned int n, unsigned int cache_size, uint16_t nb_elem, int socket_id); +#include + +static __rte_always_inline uint16_t +__rte_event_enqueue_burst(uint8_t dev_id, uint8_t port_id, + const struct rte_event ev[], uint16_t nb_events, + const event_enqueue_burst_t fn) +{ + const struct rte_eventdev *dev = &rte_eventdevs[dev_id]; + +#ifdef RTE_LIBRTE_EVENTDEV_DEBUG + if (dev_id >= RTE_EVENT_MAX_DEVS || !rte_eventdevs[dev_id].attached) { + rte_errno = EINVAL; + return 0; + } + + if (port_id >= dev->data->nb_ports) { + rte_errno = EINVAL; + return 0; + } +#endif + rte_eventdev_trace_enq_burst(dev_id, port_id, ev, nb_events, fn); + /* + * Allow zero cost non burst mode routine invocation if application + * requests nb_events as const one + */ + if (nb_events == 1) + return (*dev->enqueue)(dev->data->ports[port_id], ev); + else + return fn(dev->data->ports[port_id], ev, nb_events); +} + +/** + * Enqueue a burst of events objects or an event object supplied in *rte_event* + * structure on an event device designated by its *dev_id* through the event + * port specified by *port_id*. Each event object specifies the event queue on + * which it will be enqueued. + * + * The *nb_events* parameter is the number of event objects to enqueue which are + * supplied in the *ev* array of *rte_event* structure. + * + * Event operations RTE_EVENT_OP_FORWARD and RTE_EVENT_OP_RELEASE must only be + * enqueued to the same port that their associated events were dequeued from. + * + * The rte_event_enqueue_burst() function returns the number of + * events objects it actually enqueued. A return value equal to *nb_events* + * means that all event objects have been enqueued. + * + * @param dev_id + * The identifier of the device. + * @param port_id + * The identifier of the event port. + * @param ev + * Points to an array of *nb_events* objects of type *rte_event* structure + * which contain the event object enqueue operations to be processed. + * @param nb_events + * The number of event objects to enqueue, typically number of + * rte_event_port_attr_get(...RTE_EVENT_PORT_ATTR_ENQ_DEPTH...) + * available for this port. + * + * @return + * The number of event objects actually enqueued on the event device. The + * return value can be less than the value of the *nb_events* parameter when + * the event devices queue is full or if invalid parameters are specified in a + * *rte_event*. If the return value is less than *nb_events*, the remaining + * events at the end of ev[] are not consumed and the caller has to take care + * of them, and rte_errno is set accordingly. Possible errno values include: + * - EINVAL The port ID is invalid, device ID is invalid, an event's queue + * ID is invalid, or an event's sched type doesn't match the + * capabilities of the destination queue. + * - ENOSPC The event port was backpressured and unable to enqueue + * one or more events. This error code is only applicable to + * closed systems. + * @see rte_event_port_attr_get(), RTE_EVENT_PORT_ATTR_ENQ_DEPTH + */ +static inline uint16_t +rte_event_enqueue_burst(uint8_t dev_id, uint8_t port_id, + const struct rte_event ev[], uint16_t nb_events) +{ + const struct rte_eventdev *dev = &rte_eventdevs[dev_id]; + + return __rte_event_enqueue_burst(dev_id, port_id, ev, nb_events, + dev->enqueue_burst); +} + +/** + * Enqueue a burst of events objects of operation type *RTE_EVENT_OP_NEW* on + * an event device designated by its *dev_id* through the event port specified + * by *port_id*. + * + * Provides the same functionality as rte_event_enqueue_burst(), expect that + * application can use this API when the all objects in the burst contains + * the enqueue operation of the type *RTE_EVENT_OP_NEW*. This specialized + * function can provide the additional hint to the PMD and optimize if possible. + * + * The rte_event_enqueue_new_burst() result is undefined if the enqueue burst + * has event object of operation type != RTE_EVENT_OP_NEW. + * + * @param dev_id + * The identifier of the device. + * @param port_id + * The identifier of the event port. + * @param ev + * Points to an array of *nb_events* objects of type *rte_event* structure + * which contain the event object enqueue operations to be processed. + * @param nb_events + * The number of event objects to enqueue, typically number of + * rte_event_port_attr_get(...RTE_EVENT_PORT_ATTR_ENQ_DEPTH...) + * available for this port. + * + * @return + * The number of event objects actually enqueued on the event device. The + * return value can be less than the value of the *nb_events* parameter when + * the event devices queue is full or if invalid parameters are specified in a + * *rte_event*. If the return value is less than *nb_events*, the remaining + * events at the end of ev[] are not consumed and the caller has to take care + * of them, and rte_errno is set accordingly. Possible errno values include: + * - EINVAL The port ID is invalid, device ID is invalid, an event's queue + * ID is invalid, or an event's sched type doesn't match the + * capabilities of the destination queue. + * - ENOSPC The event port was backpressured and unable to enqueue + * one or more events. This error code is only applicable to + * closed systems. + * @see rte_event_port_attr_get(), RTE_EVENT_PORT_ATTR_ENQ_DEPTH + * @see rte_event_enqueue_burst() + */ +static inline uint16_t +rte_event_enqueue_new_burst(uint8_t dev_id, uint8_t port_id, + const struct rte_event ev[], uint16_t nb_events) +{ + const struct rte_eventdev *dev = &rte_eventdevs[dev_id]; + + return __rte_event_enqueue_burst(dev_id, port_id, ev, nb_events, + dev->enqueue_new_burst); +} + +/** + * Enqueue a burst of events objects of operation type *RTE_EVENT_OP_FORWARD* + * on an event device designated by its *dev_id* through the event port + * specified by *port_id*. + * + * Provides the same functionality as rte_event_enqueue_burst(), expect that + * application can use this API when the all objects in the burst contains + * the enqueue operation of the type *RTE_EVENT_OP_FORWARD*. This specialized + * function can provide the additional hint to the PMD and optimize if possible. + * + * The rte_event_enqueue_new_burst() result is undefined if the enqueue burst + * has event object of operation type != RTE_EVENT_OP_FORWARD. + * + * @param dev_id + * The identifier of the device. + * @param port_id + * The identifier of the event port. + * @param ev + * Points to an array of *nb_events* objects of type *rte_event* structure + * which contain the event object enqueue operations to be processed. + * @param nb_events + * The number of event objects to enqueue, typically number of + * rte_event_port_attr_get(...RTE_EVENT_PORT_ATTR_ENQ_DEPTH...) + * available for this port. + * + * @return + * The number of event objects actually enqueued on the event device. The + * return value can be less than the value of the *nb_events* parameter when + * the event devices queue is full or if invalid parameters are specified in a + * *rte_event*. If the return value is less than *nb_events*, the remaining + * events at the end of ev[] are not consumed and the caller has to take care + * of them, and rte_errno is set accordingly. Possible errno values include: + * - EINVAL The port ID is invalid, device ID is invalid, an event's queue + * ID is invalid, or an event's sched type doesn't match the + * capabilities of the destination queue. + * - ENOSPC The event port was backpressured and unable to enqueue + * one or more events. This error code is only applicable to + * closed systems. + * @see rte_event_port_attr_get(), RTE_EVENT_PORT_ATTR_ENQ_DEPTH + * @see rte_event_enqueue_burst() + */ +static inline uint16_t +rte_event_enqueue_forward_burst(uint8_t dev_id, uint8_t port_id, + const struct rte_event ev[], uint16_t nb_events) +{ + const struct rte_eventdev *dev = &rte_eventdevs[dev_id]; + + return __rte_event_enqueue_burst(dev_id, port_id, ev, nb_events, + dev->enqueue_forward_burst); +} + +/** + * Dequeue a burst of events objects or an event object from the event port + * designated by its *event_port_id*, on an event device designated + * by its *dev_id*. + * + * rte_event_dequeue_burst() does not dictate the specifics of scheduling + * algorithm as each eventdev driver may have different criteria to schedule + * an event. However, in general, from an application perspective scheduler may + * use the following scheme to dispatch an event to the port. + * + * 1) Selection of event queue based on + * a) The list of event queues are linked to the event port. + * b) If the device has RTE_EVENT_DEV_CAP_QUEUE_QOS capability then event + * queue selection from list is based on event queue priority relative to + * other event queue supplied as *priority* in rte_event_queue_setup() + * c) If the device has RTE_EVENT_DEV_CAP_EVENT_QOS capability then event + * queue selection from the list is based on event priority supplied as + * *priority* in rte_event_enqueue_burst() + * 2) Selection of event + * a) The number of flows available in selected event queue. + * b) Schedule type method associated with the event + * + * The *nb_events* parameter is the maximum number of event objects to dequeue + * which are returned in the *ev* array of *rte_event* structure. + * + * The rte_event_dequeue_burst() function returns the number of events objects + * it actually dequeued. A return value equal to *nb_events* means that all + * event objects have been dequeued. + * + * The number of events dequeued is the number of scheduler contexts held by + * this port. These contexts are automatically released in the next + * rte_event_dequeue_burst() invocation if the port supports implicit + * releases, or invoking rte_event_enqueue_burst() with RTE_EVENT_OP_RELEASE + * operation can be used to release the contexts early. + * + * Event operations RTE_EVENT_OP_FORWARD and RTE_EVENT_OP_RELEASE must only be + * enqueued to the same port that their associated events were dequeued from. + * + * @param dev_id + * The identifier of the device. + * @param port_id + * The identifier of the event port. + * @param[out] ev + * Points to an array of *nb_events* objects of type *rte_event* structure + * for output to be populated with the dequeued event objects. + * @param nb_events + * The maximum number of event objects to dequeue, typically number of + * rte_event_port_dequeue_depth() available for this port. + * + * @param timeout_ticks + * - 0 no-wait, returns immediately if there is no event. + * - >0 wait for the event, if the device is configured with + * RTE_EVENT_DEV_CFG_PER_DEQUEUE_TIMEOUT then this function will wait until + * at least one event is available or *timeout_ticks* time. + * if the device is not configured with RTE_EVENT_DEV_CFG_PER_DEQUEUE_TIMEOUT + * then this function will wait until the event available or + * *dequeue_timeout_ns* ns which was previously supplied to + * rte_event_dev_configure() + * + * @return + * The number of event objects actually dequeued from the port. The return + * value can be less than the value of the *nb_events* parameter when the + * event port's queue is not full. + * + * @see rte_event_port_dequeue_depth() + */ +static inline uint16_t +rte_event_dequeue_burst(uint8_t dev_id, uint8_t port_id, struct rte_event ev[], + uint16_t nb_events, uint64_t timeout_ticks) +{ + struct rte_eventdev *dev = &rte_eventdevs[dev_id]; + +#ifdef RTE_LIBRTE_EVENTDEV_DEBUG + if (dev_id >= RTE_EVENT_MAX_DEVS || !rte_eventdevs[dev_id].attached) { + rte_errno = EINVAL; + return 0; + } + + if (port_id >= dev->data->nb_ports) { + rte_errno = EINVAL; + return 0; + } +#endif + rte_eventdev_trace_deq_burst(dev_id, port_id, ev, nb_events); + /* + * Allow zero cost non burst mode routine invocation if application + * requests nb_events as const one + */ + if (nb_events == 1) + return (*dev->dequeue)(dev->data->ports[port_id], ev, + timeout_ticks); + else + return (*dev->dequeue_burst)(dev->data->ports[port_id], ev, + nb_events, timeout_ticks); +} + #ifdef __cplusplus } #endif diff --git a/lib/eventdev/rte_eventdev_core.h b/lib/eventdev/rte_eventdev_core.h new file mode 100644 index 0000000000..b97cdf84fe --- /dev/null +++ b/lib/eventdev/rte_eventdev_core.h @@ -0,0 +1,138 @@ +/* SPDX-License-Identifier: BSD-3-Clause + * Copyright(c) 2016-2018 Intel Corporation. + * Copyright(C) 2021 Marvell. + * Copyright 2016 NXP + * All rights reserved. + */ + +#ifndef _RTE_EVENTDEV_CORE_H_ +#define _RTE_EVENTDEV_CORE_H_ + +#ifdef __cplusplus +extern "C" { +#endif + +typedef uint16_t (*event_enqueue_t)(void *port, const struct rte_event *ev); +/**< @internal Enqueue event on port of a device */ + +typedef uint16_t (*event_enqueue_burst_t)(void *port, + const struct rte_event ev[], + uint16_t nb_events); +/**< @internal Enqueue burst of events on port of a device */ + +typedef uint16_t (*event_dequeue_t)(void *port, struct rte_event *ev, + uint64_t timeout_ticks); +/**< @internal Dequeue event from port of a device */ + +typedef uint16_t (*event_dequeue_burst_t)(void *port, struct rte_event ev[], + uint16_t nb_events, + uint64_t timeout_ticks); +/**< @internal Dequeue burst of events from port of a device */ + +typedef uint16_t (*event_tx_adapter_enqueue_t)(void *port, + struct rte_event ev[], + uint16_t nb_events); +/**< @internal Enqueue burst of events on port of a device */ + +typedef uint16_t (*event_crypto_adapter_enqueue_t)(void *port, + struct rte_event ev[], + uint16_t nb_events); +/**< @internal Enqueue burst of events on crypto adapter */ + +#define RTE_EVENTDEV_NAME_MAX_LEN (64) +/**< @internal Max length of name of event PMD */ + +/** + * @internal + * The data part, with no function pointers, associated with each device. + * + * This structure is safe to place in shared memory to be common among + * different processes in a multi-process configuration. + */ +struct rte_eventdev_data { + int socket_id; + /**< Socket ID where memory is allocated */ + uint8_t dev_id; + /**< Device ID for this instance */ + uint8_t nb_queues; + /**< Number of event queues. */ + uint8_t nb_ports; + /**< Number of event ports. */ + void **ports; + /**< Array of pointers to ports. */ + struct rte_event_port_conf *ports_cfg; + /**< Array of port configuration structures. */ + struct rte_event_queue_conf *queues_cfg; + /**< Array of queue configuration structures. */ + uint16_t *links_map; + /**< Memory to store queues to port connections. */ + void *dev_private; + /**< PMD-specific private data */ + uint32_t event_dev_cap; + /**< Event device capabilities(RTE_EVENT_DEV_CAP_)*/ + struct rte_event_dev_config dev_conf; + /**< Configuration applied to device. */ + uint8_t service_inited; + /* Service initialization state */ + uint32_t service_id; + /* Service ID*/ + void *dev_stop_flush_arg; + /**< User-provided argument for event flush function */ + + RTE_STD_C11 + uint8_t dev_started : 1; + /**< Device state: STARTED(1)/STOPPED(0) */ + + char name[RTE_EVENTDEV_NAME_MAX_LEN]; + /**< Unique identifier name */ + + uint64_t reserved_64s[4]; /**< Reserved for future fields */ + void *reserved_ptrs[4]; /**< Reserved for future fields */ +} __rte_cache_aligned; + +/** @internal The data structure associated with each event device. */ +struct rte_eventdev { + event_enqueue_t enqueue; + /**< Pointer to PMD enqueue function. */ + event_enqueue_burst_t enqueue_burst; + /**< Pointer to PMD enqueue burst function. */ + event_enqueue_burst_t enqueue_new_burst; + /**< Pointer to PMD enqueue burst function(op new variant) */ + event_enqueue_burst_t enqueue_forward_burst; + /**< Pointer to PMD enqueue burst function(op forward variant) */ + event_dequeue_t dequeue; + /**< Pointer to PMD dequeue function. */ + event_dequeue_burst_t dequeue_burst; + /**< Pointer to PMD dequeue burst function. */ + event_tx_adapter_enqueue_t txa_enqueue_same_dest; + /**< Pointer to PMD eth Tx adapter burst enqueue function with + * events destined to same Eth port & Tx queue. + */ + event_tx_adapter_enqueue_t txa_enqueue; + /**< Pointer to PMD eth Tx adapter enqueue function. */ + struct rte_eventdev_data *data; + /**< Pointer to device data */ + struct eventdev_ops *dev_ops; + /**< Functions exported by PMD */ + struct rte_device *dev; + /**< Device info. supplied by probing */ + + RTE_STD_C11 + uint8_t attached : 1; + /**< Flag indicating the device is attached */ + + event_crypto_adapter_enqueue_t ca_enqueue; + /**< Pointer to PMD crypto adapter enqueue function. */ + + uint64_t reserved_64s[4]; /**< Reserved for future fields */ + void *reserved_ptrs[3]; /**< Reserved for future fields */ +} __rte_cache_aligned; + +extern struct rte_eventdev *rte_eventdevs; +/** @internal The pool of rte_eventdev structures. */ + +#ifdef __cplusplus +} +#endif + +#endif /*_RTE_EVENTDEV_CORE_H_*/ -- 2.17.1