From: Xueming Li <xuemingl@nvidia.com>
To: <dev@dpdk.org>
Cc: <xuemingl@nvidia.com>,
Viacheslav Ovsiienko <viacheslavo@nvidia.com>,
Lior Margalit <lmargalit@nvidia.com>,
Matan Azrad <matan@nvidia.com>
Subject: [dpdk-dev] [PATCH v3 7/8] net/mlx5: enable DevX Tx queue creation
Date: Tue, 19 Oct 2021 18:35:00 +0800 [thread overview]
Message-ID: <20211019103501.2216840-8-xuemingl@nvidia.com> (raw)
In-Reply-To: <20211019103501.2216840-1-xuemingl@nvidia.com>
Verbs API does not support Infiniband device port number larger 255 by
design. To support more representors on a single Infiniband device DevX
API should be engaged.
While creating Send Queue (SQ) object with Verbs API, the PMD assigned
IB device port attribute and kernel created the default miss flows in
FDB domain, to redirect egress traffic from the queue being created to
representor appropriate peer (wire, HPF, VF or SF).
With DevX API there is no IB-device port attribute (it is merely kernel
one, DevX operates in PRM terms) and PMD must create default miss flows
in FDB explicitly. PMD did not provide this and using DevX API for
E-Switch configurations was disabled.
The default miss FDB flow matches E-Switch manager vport (to make sure
the source is some representor) and SQn (Send Queue number - device
internal queue index). The root flow table managed by kernel/firmware
and it does not support vport redirect action, we have to split the
default miss flow into two ones:
- flow with lowest priority in the root table that matches E-Switch
manager vport ID and jump to group 1.
- flow in group 1 that matches E-Switch manager vport ID and SQn and
forwards packet to peer vport
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
---
drivers/net/mlx5/linux/mlx5_os.c | 62 +-------------------------
drivers/net/mlx5/mlx5.h | 2 +
drivers/net/mlx5/mlx5_devx.c | 10 ++---
drivers/net/mlx5/mlx5_devx.h | 2 +
drivers/net/mlx5/mlx5_flow.c | 74 ++++++++++++++++++++++++++++++++
drivers/net/mlx5/mlx5_trigger.c | 11 ++++-
6 files changed, 94 insertions(+), 67 deletions(-)
diff --git a/drivers/net/mlx5/linux/mlx5_os.c b/drivers/net/mlx5/linux/mlx5_os.c
index f283a3779cc..93ee9318ebc 100644
--- a/drivers/net/mlx5/linux/mlx5_os.c
+++ b/drivers/net/mlx5/linux/mlx5_os.c
@@ -697,56 +697,6 @@ mlx5_init_once(void)
return ret;
}
-/**
- * Create the Tx queue DevX/Verbs object.
- *
- * @param dev
- * Pointer to Ethernet device.
- * @param idx
- * Queue index in DPDK Tx queue array.
- *
- * @return
- * 0 on success, a negative errno value otherwise and rte_errno is set.
- */
-static int
-mlx5_os_txq_obj_new(struct rte_eth_dev *dev, uint16_t idx)
-{
- struct mlx5_priv *priv = dev->data->dev_private;
- struct mlx5_txq_data *txq_data = (*priv->txqs)[idx];
- struct mlx5_txq_ctrl *txq_ctrl =
- container_of(txq_data, struct mlx5_txq_ctrl, txq);
-
- if (txq_ctrl->type == MLX5_TXQ_TYPE_HAIRPIN)
- return mlx5_txq_devx_obj_new(dev, idx);
-#ifdef HAVE_MLX5DV_DEVX_UAR_OFFSET
- if (!priv->config.dv_esw_en)
- return mlx5_txq_devx_obj_new(dev, idx);
-#endif
- return mlx5_txq_ibv_obj_new(dev, idx);
-}
-
-/**
- * Release an Tx DevX/verbs queue object.
- *
- * @param txq_obj
- * DevX/Verbs Tx queue object.
- */
-static void
-mlx5_os_txq_obj_release(struct mlx5_txq_obj *txq_obj)
-{
- if (txq_obj->txq_ctrl->type == MLX5_TXQ_TYPE_HAIRPIN) {
- mlx5_txq_devx_obj_release(txq_obj);
- return;
- }
-#ifdef HAVE_MLX5DV_DEVX_UAR_OFFSET
- if (!txq_obj->txq_ctrl->priv->config.dv_esw_en) {
- mlx5_txq_devx_obj_release(txq_obj);
- return;
- }
-#endif
- mlx5_txq_ibv_obj_release(txq_obj);
-}
-
/**
* DV flow counter mode detect and config.
*
@@ -1812,16 +1762,6 @@ mlx5_dev_spawn(struct rte_device *dpdk_dev,
ibv_obj_ops.drop_action_create;
priv->obj_ops.drop_action_destroy =
ibv_obj_ops.drop_action_destroy;
-#ifndef HAVE_MLX5DV_DEVX_UAR_OFFSET
- priv->obj_ops.txq_obj_modify = ibv_obj_ops.txq_obj_modify;
-#else
- if (config->dv_esw_en)
- priv->obj_ops.txq_obj_modify =
- ibv_obj_ops.txq_obj_modify;
-#endif
- /* Use specific wrappers for Tx object. */
- priv->obj_ops.txq_obj_new = mlx5_os_txq_obj_new;
- priv->obj_ops.txq_obj_release = mlx5_os_txq_obj_release;
mlx5_queue_counter_id_prepare(eth_dev);
priv->obj_ops.lb_dummy_queue_create =
mlx5_rxq_ibv_obj_dummy_lb_create;
@@ -1832,7 +1772,7 @@ mlx5_dev_spawn(struct rte_device *dpdk_dev,
}
if (config->tx_pp &&
(priv->config.dv_esw_en ||
- priv->obj_ops.txq_obj_new != mlx5_os_txq_obj_new)) {
+ priv->obj_ops.txq_obj_new != mlx5_txq_devx_obj_new)) {
/*
* HAVE_MLX5DV_DEVX_UAR_OFFSET is required to support
* packet pacing and already checked above.
diff --git a/drivers/net/mlx5/mlx5.h b/drivers/net/mlx5/mlx5.h
index 3581414b789..570f827375a 100644
--- a/drivers/net/mlx5/mlx5.h
+++ b/drivers/net/mlx5/mlx5.h
@@ -1699,6 +1699,8 @@ int mlx5_ctrl_flow(struct rte_eth_dev *dev,
struct rte_flow_item_eth *eth_mask);
int mlx5_flow_lacp_miss(struct rte_eth_dev *dev);
struct rte_flow *mlx5_flow_create_esw_table_zero_flow(struct rte_eth_dev *dev);
+uint32_t mlx5_flow_create_devx_sq_miss_flow(struct rte_eth_dev *dev,
+ uint32_t txq);
void mlx5_flow_async_pool_query_handle(struct mlx5_dev_ctx_shared *sh,
uint64_t async_id, int status);
void mlx5_set_query_alarm(struct mlx5_dev_ctx_shared *sh);
diff --git a/drivers/net/mlx5/mlx5_devx.c b/drivers/net/mlx5/mlx5_devx.c
index a1db53577a2..a49602cb957 100644
--- a/drivers/net/mlx5/mlx5_devx.c
+++ b/drivers/net/mlx5/mlx5_devx.c
@@ -102,9 +102,9 @@ mlx5_devx_modify_rq(struct mlx5_rxq_obj *rxq_obj, uint8_t type)
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
-static int
-mlx5_devx_modify_sq(struct mlx5_txq_obj *obj, enum mlx5_txq_modify_type type,
- uint8_t dev_port)
+int
+mlx5_txq_devx_modify(struct mlx5_txq_obj *obj, enum mlx5_txq_modify_type type,
+ uint8_t dev_port)
{
struct mlx5_devx_modify_sq_attr msq_attr = { 0 };
int ret;
@@ -1118,7 +1118,7 @@ mlx5_txq_devx_obj_new(struct rte_eth_dev *dev, uint16_t idx)
*txq_data->qp_db = 0;
txq_data->qp_num_8s = txq_obj->sq_obj.sq->id << 8;
/* Change Send Queue state to Ready-to-Send. */
- ret = mlx5_devx_modify_sq(txq_obj, MLX5_TXQ_MOD_RST2RDY, 0);
+ ret = mlx5_txq_devx_modify(txq_obj, MLX5_TXQ_MOD_RST2RDY, 0);
if (ret) {
rte_errno = errno;
DRV_LOG(ERR,
@@ -1187,7 +1187,7 @@ struct mlx5_obj_ops devx_obj_ops = {
.drop_action_create = mlx5_devx_drop_action_create,
.drop_action_destroy = mlx5_devx_drop_action_destroy,
.txq_obj_new = mlx5_txq_devx_obj_new,
- .txq_obj_modify = mlx5_devx_modify_sq,
+ .txq_obj_modify = mlx5_txq_devx_modify,
.txq_obj_release = mlx5_txq_devx_obj_release,
.lb_dummy_queue_create = NULL,
.lb_dummy_queue_release = NULL,
diff --git a/drivers/net/mlx5/mlx5_devx.h b/drivers/net/mlx5/mlx5_devx.h
index bc8a8d6b73c..a95207a6b9a 100644
--- a/drivers/net/mlx5/mlx5_devx.h
+++ b/drivers/net/mlx5/mlx5_devx.h
@@ -8,6 +8,8 @@
#include "mlx5.h"
int mlx5_txq_devx_obj_new(struct rte_eth_dev *dev, uint16_t idx);
+int mlx5_txq_devx_modify(struct mlx5_txq_obj *obj,
+ enum mlx5_txq_modify_type type, uint8_t dev_port);
void mlx5_txq_devx_obj_release(struct mlx5_txq_obj *txq_obj);
extern struct mlx5_obj_ops devx_obj_ops;
diff --git a/drivers/net/mlx5/mlx5_flow.c b/drivers/net/mlx5/mlx5_flow.c
index b5232cd46ae..1528f8c6b51 100644
--- a/drivers/net/mlx5/mlx5_flow.c
+++ b/drivers/net/mlx5/mlx5_flow.c
@@ -6573,6 +6573,80 @@ mlx5_flow_create_esw_table_zero_flow(struct rte_eth_dev *dev)
actions, false, &error);
}
+/**
+ * Create a dedicated flow rule on e-switch table 1, matches ESW manager
+ * and sq number, directs all packets to peer vport.
+ *
+ * @param dev
+ * Pointer to Ethernet device.
+ * @param txq
+ * Txq index.
+ *
+ * @return
+ * Flow ID on success, 0 otherwise and rte_errno is set.
+ */
+uint32_t
+mlx5_flow_create_devx_sq_miss_flow(struct rte_eth_dev *dev, uint32_t txq)
+{
+ struct rte_flow_attr attr = {
+ .group = 0,
+ .priority = MLX5_FLOW_LOWEST_PRIO_INDICATOR,
+ .ingress = 1,
+ .egress = 0,
+ .transfer = 1,
+ };
+ struct rte_flow_item_port_id port_spec = {
+ .id = MLX5_PORT_ESW_MGR,
+ };
+ struct mlx5_rte_flow_item_tx_queue txq_spec = {
+ .queue = txq,
+ };
+ struct rte_flow_item pattern[] = {
+ {
+ .type = RTE_FLOW_ITEM_TYPE_PORT_ID,
+ .spec = &port_spec,
+ },
+ {
+ .type = (enum rte_flow_item_type)
+ MLX5_RTE_FLOW_ITEM_TYPE_TX_QUEUE,
+ .spec = &txq_spec,
+ },
+ {
+ .type = RTE_FLOW_ITEM_TYPE_END,
+ },
+ };
+ struct rte_flow_action_jump jump = {
+ .group = 1,
+ };
+ struct rte_flow_action_port_id port = {
+ .id = dev->data->port_id,
+ };
+ struct rte_flow_action actions[] = {
+ {
+ .type = RTE_FLOW_ACTION_TYPE_JUMP,
+ .conf = &jump,
+ },
+ {
+ .type = RTE_FLOW_ACTION_TYPE_END,
+ },
+ };
+ struct rte_flow_error error;
+
+ /*
+ * Creates group 0, highest priority jump flow.
+ * Matches txq to bypass kernel packets.
+ */
+ if (flow_list_create(dev, MLX5_FLOW_TYPE_CTL, &attr, pattern, actions,
+ false, &error) == 0)
+ return 0;
+ /* Create group 1, lowest priority redirect flow for txq. */
+ attr.group = 1;
+ actions[0].conf = &port;
+ actions[0].type = RTE_FLOW_ACTION_TYPE_PORT_ID;
+ return flow_list_create(dev, MLX5_FLOW_TYPE_CTL, &attr, pattern,
+ actions, false, &error);
+}
+
/**
* Validate a flow supported by the NIC.
*
diff --git a/drivers/net/mlx5/mlx5_trigger.c b/drivers/net/mlx5/mlx5_trigger.c
index 54173bfacb2..42d8bb31128 100644
--- a/drivers/net/mlx5/mlx5_trigger.c
+++ b/drivers/net/mlx5/mlx5_trigger.c
@@ -1255,9 +1255,18 @@ mlx5_traffic_enable(struct rte_eth_dev *dev)
goto error;
}
}
+ if ((priv->representor || priv->master) &&
+ priv->config.dv_esw_en) {
+ if (mlx5_flow_create_devx_sq_miss_flow(dev, i) == 0) {
+ DRV_LOG(ERR,
+ "Port %u Tx queue %u SQ create representor devx default miss rule failed.",
+ dev->data->port_id, i);
+ goto error;
+ }
+ }
mlx5_txq_release(dev, i);
}
- if (priv->config.dv_esw_en && !priv->config.vf && !priv->config.sf) {
+ if ((priv->master || priv->representor) && priv->config.dv_esw_en) {
if (mlx5_flow_create_esw_table_zero_flow(dev))
priv->fdb_def_rule = 1;
else
--
2.33.0
next prev parent reply other threads:[~2021-10-19 10:36 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-27 8:32 [dpdk-dev] [PATCH 0/8] net/mlx5: support more than 255 representors Xueming Li
2021-09-27 8:32 ` [dpdk-dev] [PATCH 1/8] common/mlx5: add netlink API to get RDMA port state Xueming Li
2021-09-27 8:32 ` [dpdk-dev] [PATCH 2/8] net/mlx5: use netlink when IB port greater than 255 Xueming Li
2021-09-27 8:32 ` [dpdk-dev] [PATCH 3/8] net/mlx5: improve Verbs flow priority discover for scalable Xueming Li
2021-09-27 8:32 ` [dpdk-dev] [PATCH 4/8] net/mlx5: check DevX to support more Verb ports Xueming Li
2021-09-27 8:32 ` [dpdk-dev] [PATCH 5/8] net/mlx5: support flow item port of switch manager Xueming Li
2021-09-27 8:32 ` [dpdk-dev] [PATCH 6/8] net/mlx5: supports flow item of normal Tx queue Xueming Li
2021-09-27 8:32 ` [dpdk-dev] [PATCH 7/8] net/mlx5: fix internal root table flow priroity Xueming Li
2021-09-27 8:32 ` [dpdk-dev] [PATCH 8/8] net/mlx5: enable DevX Tx queue creation Xueming Li
2021-10-16 8:07 ` [dpdk-dev] [PATCH v2 0/8] net/mlx5: support more than 255 representors Xueming Li
2021-10-16 8:07 ` [dpdk-dev] [PATCH v2 1/8] common/mlx5: add netlink API to get RDMA port state Xueming Li
2021-10-19 8:23 ` Slava Ovsiienko
2021-10-16 8:07 ` [dpdk-dev] [PATCH v2 2/8] net/mlx5: use netlink when IB port greater than 255 Xueming Li
2021-10-19 8:24 ` Slava Ovsiienko
2021-10-16 8:07 ` [dpdk-dev] [PATCH v2 3/8] net/mlx5: improve Verbs flow priority discover for scalable Xueming Li
2021-10-19 8:26 ` Slava Ovsiienko
2021-10-16 8:07 ` [dpdk-dev] [PATCH v2 4/8] net/mlx5: support E-Switch manager egress traffic match Xueming Li
2021-10-19 8:26 ` Slava Ovsiienko
2021-10-16 8:07 ` [dpdk-dev] [PATCH v2 5/8] net/mlx5: supports flow item of normal Tx queue Xueming Li
2021-10-19 8:27 ` Slava Ovsiienko
2021-10-16 8:07 ` [dpdk-dev] [PATCH v2 6/8] net/mlx5: fix internal root table flow priroity Xueming Li
2021-10-19 8:28 ` Slava Ovsiienko
2021-10-16 8:07 ` [dpdk-dev] [PATCH v2 7/8] net/mlx5: enable DevX Tx queue creation Xueming Li
2021-10-19 8:29 ` Slava Ovsiienko
2021-10-16 8:07 ` [dpdk-dev] [PATCH v2 8/8] net/mlx5: check DevX to support more Verbs ports Xueming Li
2021-10-19 8:30 ` Slava Ovsiienko
2021-10-19 10:34 ` [dpdk-dev] [PATCH v3 0/8] net/mlx5: support more than 255 representors Xueming Li
2021-10-19 10:34 ` [dpdk-dev] [PATCH v3 1/8] common/mlx5: add netlink API to get RDMA port state Xueming Li
2021-10-21 13:34 ` Ferruh Yigit
2021-10-19 10:34 ` [dpdk-dev] [PATCH v3 2/8] net/mlx5: use netlink when IB port greater than 255 Xueming Li
2021-10-19 10:34 ` [dpdk-dev] [PATCH v3 3/8] net/mlx5: improve Verbs flow priority discover for scalable Xueming Li
2021-10-19 10:34 ` [dpdk-dev] [PATCH v3 4/8] net/mlx5: support E-Switch manager egress traffic match Xueming Li
2021-10-19 10:34 ` [dpdk-dev] [PATCH v3 5/8] net/mlx5: supports flow item of normal Tx queue Xueming Li
2021-10-19 10:34 ` [dpdk-dev] [PATCH v3 6/8] net/mlx5: fix internal root table flow priroity Xueming Li
2021-10-19 10:35 ` Xueming Li [this message]
2021-10-19 10:35 ` [dpdk-dev] [PATCH v3 8/8] net/mlx5: check DevX to support more Verbs ports Xueming Li
2021-10-20 13:40 ` [dpdk-dev] [PATCH v3 0/8] net/mlx5: support more than 255 representors Raslan Darawsheh
2021-10-20 16:00 ` Xueming(Steven) Li
2021-10-22 9:11 ` [dpdk-dev] [PATCH v4 " Xueming Li
2021-10-22 9:11 ` [dpdk-dev] [PATCH v4 1/8] common/mlx5: add netlink API to get RDMA port state Xueming Li
2021-10-22 9:11 ` [dpdk-dev] [PATCH v4 2/8] net/mlx5: use netlink when IB port greater than 255 Xueming Li
2021-10-22 9:11 ` [dpdk-dev] [PATCH v4 3/8] net/mlx5: improve Verbs flow priority discover for scalable Xueming Li
2021-10-22 9:11 ` [dpdk-dev] [PATCH v4 4/8] net/mlx5: support E-Switch manager egress traffic match Xueming Li
2021-10-22 9:11 ` [dpdk-dev] [PATCH v4 5/8] net/mlx5: supports flow item of normal Tx queue Xueming Li
2021-10-22 9:11 ` [dpdk-dev] [PATCH v4 6/8] net/mlx5: fix internal root table flow priroity Xueming Li
2021-10-22 9:11 ` [dpdk-dev] [PATCH v4 7/8] net/mlx5: enable DevX Tx queue creation Xueming Li
2021-10-22 9:11 ` [dpdk-dev] [PATCH v4 8/8] net/mlx5: check DevX to support more Verbs ports Xueming Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211019103501.2216840-8-xuemingl@nvidia.com \
--to=xuemingl@nvidia.com \
--cc=dev@dpdk.org \
--cc=lmargalit@nvidia.com \
--cc=matan@nvidia.com \
--cc=viacheslavo@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).